bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Chamber followup

Browse Source
This commit is contained in:
Scott Lahteine 2021-02-25 10:24:58 -06:00
parent f7d9305786
commit fd77251fdd
1 changed files with 2 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
Marlin/Configuration_adv.h
View File

@ -151,12 +151,9 @@
#endif #endif
#if TEMP_SENSOR_CHAMBER #if TEMP_SENSOR_CHAMBER
// Make sure you define where your heater is connected, the following works on a BTT SKR 1.4 Turbo //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug)
// using the secondary tool heater output. (FAN1 by default).
//#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (SKR 1.4 Turbo specific)
//#define HEATER_CHAMBER_PIN P2_04 // Chamber heater on/off pin (HE1 connector on SKR 1.4 Turbo)
//#define HEATER_CHAMBER_INVERTING false //#define HEATER_CHAMBER_INVERTING false
//#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug)
//#define CHAMBER_FAN // Enable a fan on the chamber //#define CHAMBER_FAN // Enable a fan on the chamber
#if ENABLED(CHAMBER_FAN) #if ENABLED(CHAMBER_FAN)