bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

✨ Support for up to 9 axes (#23112, #24036, #24231)

Browse Source
This commit is contained in:
Scott Lahteine
2022-04-29 15:21:15 -05:00
parent 369542db3b
commit fd13a928c1
103 changed files with 4553 additions and 799 deletions
Download Patch File Download Diff File Expand all files Collapse all files

31
Marlin/src/gcode/control/M17_M18_M84.cpp
View File

@ -46,13 +46,16 @@ inline stepper_flags_t selected_axis_bits() {
selected.bits = selected.e_bits();
}
#endif
selected.bits |= LINEAR_AXIS_GANG(
selected.bits |= NUM_AXIS_GANG(
(parser.seen_test('X') << X_AXIS),
| (parser.seen_test('Y') << Y_AXIS),
| (parser.seen_test('Z') << Z_AXIS),
| (parser.seen_test(AXIS4_NAME) << I_AXIS),
| (parser.seen_test(AXIS5_NAME) << J_AXIS),
| (parser.seen_test(AXIS6_NAME) << K_AXIS)
| (parser.seen_test(AXIS6_NAME) << K_AXIS),
| (parser.seen_test(AXIS7_NAME) << U_AXIS),
| (parser.seen_test(AXIS8_NAME) << V_AXIS),
| (parser.seen_test(AXIS9_NAME) << W_AXIS)
);
return selected;
}
@ -69,7 +72,7 @@ void do_enable(const stepper_flags_t to_enable) {
ena_mask_t also_enabled = 0; // Track steppers enabled due to overlap
// Enable all flagged axes
LOOP_LINEAR_AXES(a) {
LOOP_NUM_AXES(a) {
if (TEST(shall_enable, a)) {
stepper.enable_axis(AxisEnum(a)); // Mark and enable the requested axis
DEBUG_ECHOLNPGM("Enabled ", axis_codes[a], " (", a, ") with overlap ", hex_word(enable_overlap[a]), " ... Enabled: ", hex_word(stepper.axis_enabled.bits));
@ -89,7 +92,7 @@ void do_enable(const stepper_flags_t to_enable) {
if ((also_enabled &= ~(shall_enable | was_enabled))) {
SERIAL_CHAR('(');
LOOP_LINEAR_AXES(a) if (TEST(also_enabled, a)) SERIAL_CHAR(axis_codes[a], ' ');
LOOP_NUM_AXES(a) if (TEST(also_enabled, a)) SERIAL_CHAR(AXIS_CHAR(a), ' ');
#if HAS_EXTRUDERS
#define _EN_ALSO(N) if (TEST(also_enabled, INDEX_OF_AXIS(E_AXIS, N))) SERIAL_CHAR('E', '0' + N, ' ');
REPEAT(EXTRUDERS, _EN_ALSO)
@ -125,13 +128,16 @@ void GcodeSuite::M17() {
stepper.enable_e_steppers();
}
#endif
LINEAR_AXIS_CODE(
NUM_AXIS_CODE(
if (parser.seen_test('X')) stepper.enable_axis(X_AXIS),
if (parser.seen_test('Y')) stepper.enable_axis(Y_AXIS),
if (parser.seen_test('Z')) stepper.enable_axis(Z_AXIS),
if (parser.seen_test(AXIS4_NAME)) stepper.enable_axis(I_AXIS),
if (parser.seen_test(AXIS5_NAME)) stepper.enable_axis(J_AXIS),
if (parser.seen_test(AXIS6_NAME)) stepper.enable_axis(K_AXIS)
if (parser.seen_test(AXIS6_NAME)) stepper.enable_axis(K_AXIS),
if (parser.seen_test(AXIS7_NAME)) stepper.enable_axis(U_AXIS),
if (parser.seen_test(AXIS8_NAME)) stepper.enable_axis(V_AXIS),
if (parser.seen_test(AXIS9_NAME)) stepper.enable_axis(W_AXIS)
);
}
}
@ -149,7 +155,7 @@ void try_to_disable(const stepper_flags_t to_disable) {
if (!still_enabled) return;
// Attempt to disable all flagged axes
LOOP_LINEAR_AXES(a)
LOOP_NUM_AXES(a)
if (TEST(to_disable.bits, a)) {
DEBUG_ECHOPGM("Try to disable ", axis_codes[a], " (", a, ") with overlap ", hex_word(enable_overlap[a]), " ... ");
if (stepper.disable_axis(AxisEnum(a))) { // Mark the requested axis and request to disable
@ -178,7 +184,7 @@ void try_to_disable(const stepper_flags_t to_disable) {
auto overlap_warning = [](const ena_mask_t axis_bits) {
SERIAL_ECHOPGM(" not disabled. Shared with");
LOOP_LINEAR_AXES(a) if (TEST(axis_bits, a)) SERIAL_CHAR(' ', axis_codes[a]);
LOOP_NUM_AXES(a) if (TEST(axis_bits, a)) SERIAL_CHAR(' ', axis_codes[a]);
#if HAS_EXTRUDERS
#define _EN_STILLON(N) if (TEST(axis_bits, INDEX_OF_AXIS(E_AXIS, N))) SERIAL_CHAR(' ', 'E', '0' + N);
REPEAT(EXTRUDERS, _EN_STILLON)
@ -187,7 +193,7 @@ void try_to_disable(const stepper_flags_t to_disable) {
};
// If any of the requested axes are still enabled, give a warning
LOOP_LINEAR_AXES(a) {
LOOP_NUM_AXES(a) {
if (TEST(still_enabled, a)) {
SERIAL_CHAR(axis_codes[a]);
overlap_warning(stepper.axis_enabled.bits & enable_overlap[a]);
@ -238,13 +244,16 @@ void GcodeSuite::M18_M84() {
stepper.disable_e_steppers();
}
#endif
LINEAR_AXIS_CODE(
NUM_AXIS_CODE(
if (parser.seen_test('X')) stepper.disable_axis(X_AXIS),
if (parser.seen_test('Y')) stepper.disable_axis(Y_AXIS),
if (parser.seen_test('Z')) stepper.disable_axis(Z_AXIS),
if (parser.seen_test(AXIS4_NAME)) stepper.disable_axis(I_AXIS),
if (parser.seen_test(AXIS5_NAME)) stepper.disable_axis(J_AXIS),
if (parser.seen_test(AXIS6_NAME)) stepper.disable_axis(K_AXIS)
if (parser.seen_test(AXIS6_NAME)) stepper.disable_axis(K_AXIS),
if (parser.seen_test(AXIS7_NAME)) stepper.disable_axis(U_AXIS),
if (parser.seen_test(AXIS8_NAME)) stepper.disable_axis(V_AXIS),
if (parser.seen_test(AXIS9_NAME)) stepper.disable_axis(W_AXIS)
);
}
}

2
Marlin/src/gcode/control/M605.cpp
View File

@ -146,7 +146,7 @@
HOTEND_LOOP() {
DEBUG_ECHOPGM_P(SP_T_STR, e);
LOOP_LINEAR_AXES(a) DEBUG_ECHOPGM(" hotend_offset[", e, "].", AS_CHAR(AXIS_CHAR(a) | 0x20), "=", hotend_offset[e][a]);
LOOP_NUM_AXES(a) DEBUG_ECHOPGM(" hotend_offset[", e, "].", AS_CHAR(AXIS_CHAR(a) | 0x20), "=", hotend_offset[e][a]);
DEBUG_EOL();
}
DEBUG_EOL();