|
|
|
|
@ -1,6 +1,6 @@
|
|
|
|
|
/**
|
|
|
|
|
* Marlin 3D Printer Firmware
|
|
|
|
|
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
|
|
|
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
|
|
|
*
|
|
|
|
|
* Based on Sprinter and grbl.
|
|
|
|
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
|
|
|
|
@ -312,8 +312,10 @@
|
|
|
|
|
#error "AUTOMATIC_CURRENT_CONTROL is now MONITOR_DRIVER_STATUS. Please update your configuration."
|
|
|
|
|
#elif defined(FILAMENT_CHANGE_LOAD_LENGTH)
|
|
|
|
|
#error "FILAMENT_CHANGE_LOAD_LENGTH is now FILAMENT_CHANGE_FAST_LOAD_LENGTH. Please update your configuration."
|
|
|
|
|
#elif ENABLED(LEVEL_BED_CORNERS) && !defined(LEVEL_CORNERS_INSET)
|
|
|
|
|
#error "LEVEL_BED_CORNERS requires a LEVEL_CORNERS_INSET value. Please update your Configuration.h."
|
|
|
|
|
#elif defined(LEVEL_CORNERS_INSET)
|
|
|
|
|
#error "LEVEL_CORNERS_INSET is now LEVEL_CORNERS_INSET_LFRB . Please update your Configuration.h."
|
|
|
|
|
#elif ENABLED(LEVEL_BED_CORNERS) && !defined(LEVEL_CORNERS_INSET_LFRB)
|
|
|
|
|
#error "LEVEL_BED_CORNERS requires LEVEL_CORNERS_INSET_LFRB values. Please update your Configuration.h."
|
|
|
|
|
#elif defined(BEZIER_JERK_CONTROL)
|
|
|
|
|
#error "BEZIER_JERK_CONTROL is now S_CURVE_ACCELERATION. Please update your configuration."
|
|
|
|
|
#elif DISABLED(CLASSIC_JERK) && defined(JUNCTION_DEVIATION_FACTOR)
|
|
|
|
|
@ -718,14 +720,16 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
|
|
|
|
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
|
|
|
|
#if !HAS_RESUME_CONTINUE
|
|
|
|
|
#error "ADVANCED_PAUSE_FEATURE currently requires an LCD controller or EMERGENCY_PARSER."
|
|
|
|
|
#elif DISABLED(NOZZLE_PARK_FEATURE)
|
|
|
|
|
#error "ADVANCED_PAUSE_FEATURE requires NOZZLE_PARK_FEATURE."
|
|
|
|
|
#elif !defined(FILAMENT_UNLOAD_PURGE_FEEDRATE)
|
|
|
|
|
#error "ADVANCED_PAUSE_FEATURE requires FILAMENT_UNLOAD_PURGE_FEEDRATE. Please add it to Configuration_adv.h."
|
|
|
|
|
#elif ENABLED(EXTRUDER_RUNOUT_PREVENT)
|
|
|
|
|
#error "EXTRUDER_RUNOUT_PREVENT is incompatible with ADVANCED_PAUSE_FEATURE."
|
|
|
|
|
#elif ENABLED(PARK_HEAD_ON_PAUSE) && NONE(SDSUPPORT, NEWPANEL, EMERGENCY_PARSER)
|
|
|
|
|
#error "PARK_HEAD_ON_PAUSE requires SDSUPPORT, EMERGENCY_PARSER, or an LCD controller."
|
|
|
|
|
#elif ENABLED(HOME_BEFORE_FILAMENT_CHANGE) && DISABLED(PAUSE_PARK_NO_STEPPER_TIMEOUT)
|
|
|
|
|
#error "HOME_BEFORE_FILAMENT_CHANGE requires PAUSE_PARK_NO_STEPPER_TIMEOUT."
|
|
|
|
|
#elif DISABLED(NOZZLE_PARK_FEATURE)
|
|
|
|
|
#error "ADVANCED_PAUSE_FEATURE requires NOZZLE_PARK_FEATURE."
|
|
|
|
|
#elif ENABLED(PREVENT_LENGTHY_EXTRUDE) && FILAMENT_CHANGE_UNLOAD_LENGTH > EXTRUDE_MAXLENGTH
|
|
|
|
|
#error "FILAMENT_CHANGE_UNLOAD_LENGTH must be less than or equal to EXTRUDE_MAXLENGTH."
|
|
|
|
|
#elif ENABLED(PREVENT_LENGTHY_EXTRUDE) && FILAMENT_CHANGE_SLOW_LOAD_LENGTH > EXTRUDE_MAXLENGTH
|
|
|
|
|
@ -923,7 +927,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
|
|
|
|
#elif TOOLCHANGE_ZRAISE < 0
|
|
|
|
|
#error "TOOLCHANGE_ZRAISE must be 0 or higher."
|
|
|
|
|
#elif ENABLED(PARKING_EXTRUDER)
|
|
|
|
|
#if !PIN_EXISTS(SOL0, SOL1)
|
|
|
|
|
#if !PINS_EXIST(SOL0, SOL1)
|
|
|
|
|
#error "PARKING_EXTRUDER requires SOL0_PIN and SOL1_PIN."
|
|
|
|
|
#elif !defined(PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE) || !WITHIN(PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE, LOW, HIGH)
|
|
|
|
|
#error "PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE must be defined as HIGH or LOW."
|
|
|
|
|
@ -1223,6 +1227,10 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
|
|
|
|
#error "Z_PROBE_LOW_POINT must be less than or equal to 0."
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if HOMING_Z_WITH_PROBE && IS_CARTESIAN && DISABLED(Z_SAFE_HOMING)
|
|
|
|
|
#error "Z_SAFE_HOMING is recommended when homing with a probe. Enable it or comment out this line to continue."
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#else
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
@ -1353,14 +1361,9 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
|
|
|
|
* Make sure Z_SAFE_HOMING point is reachable
|
|
|
|
|
*/
|
|
|
|
|
#if ENABLED(Z_SAFE_HOMING)
|
|
|
|
|
#if HAS_BED_PROBE && (ENABLED(DELTA) || IS_SCARA)
|
|
|
|
|
static_assert(WITHIN(Z_SAFE_HOMING_X_POINT, PROBE_X_MIN, PROBE_X_MAX), "Z_SAFE_HOMING_X_POINT is outside the probe region.");
|
|
|
|
|
static_assert(WITHIN(Z_SAFE_HOMING_Y_POINT, PROBE_Y_MIN, PROBE_Y_MAX), "Z_SAFE_HOMING_Y_POINT is outside the probe region.");
|
|
|
|
|
#else
|
|
|
|
|
static_assert(WITHIN(Z_SAFE_HOMING_X_POINT, X_MIN_POS, X_MAX_POS), "Z_SAFE_HOMING_X_POINT can't be reached by the nozzle.");
|
|
|
|
|
static_assert(WITHIN(Z_SAFE_HOMING_Y_POINT, Y_MIN_POS, Y_MAX_POS), "Z_SAFE_HOMING_Y_POINT can't be reached by the nozzle.");
|
|
|
|
|
#endif
|
|
|
|
|
#endif // Z_SAFE_HOMING
|
|
|
|
|
static_assert(WITHIN(Z_SAFE_HOMING_X_POINT, X_MIN_BED, X_MAX_BED), "Z_SAFE_HOMING_X_POINT can't be reached by the nozzle.");
|
|
|
|
|
static_assert(WITHIN(Z_SAFE_HOMING_Y_POINT, Y_MIN_BED, Y_MAX_BED), "Z_SAFE_HOMING_Y_POINT can't be reached by the nozzle.");
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
* Make sure DISABLE_[XYZ] compatible with selected homing options
|
|
|
|
|
@ -1511,9 +1514,9 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
|
|
|
|
#error "HEATER_0_PIN not defined for this board."
|
|
|
|
|
#elif !ANY_PIN(TEMP_0, MAX6675_SS)
|
|
|
|
|
#error "TEMP_0_PIN not defined for this board."
|
|
|
|
|
#elif ((defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)) && !PIN_EXISTS(E0_STEP, E0_DIR))
|
|
|
|
|
#elif ((defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)) && !PINS_EXIST(E0_STEP, E0_DIR))
|
|
|
|
|
#error "E0_STEP_PIN or E0_DIR_PIN not defined for this board."
|
|
|
|
|
#elif ( !(defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)) && (!PIN_EXISTS(E0_STEP, E0_DIR) || !HAS_E0_ENABLE))
|
|
|
|
|
#elif ( !(defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)) && (!PINS_EXIST(E0_STEP, E0_DIR) || !HAS_E0_ENABLE))
|
|
|
|
|
#error "E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board."
|
|
|
|
|
#elif EXTRUDERS && TEMP_SENSOR_0 == 0
|
|
|
|
|
#error "TEMP_SENSOR_0 is required with any extruders."
|
|
|
|
|
@ -1705,35 +1708,35 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
|
|
|
|
*/
|
|
|
|
|
#if DISABLED(MK2_MULTIPLEXER) // MK2_MULTIPLEXER uses E0 stepper only
|
|
|
|
|
#if E_STEPPERS
|
|
|
|
|
#if !(PIN_EXISTS(E0_STEP, E0_DIR) && HAS_E0_ENABLE)
|
|
|
|
|
#if !(PINS_EXIST(E0_STEP, E0_DIR) && HAS_E0_ENABLE)
|
|
|
|
|
#error "E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board."
|
|
|
|
|
#endif
|
|
|
|
|
#if E_STEPPERS > 1
|
|
|
|
|
#if !(PIN_EXISTS(E1_STEP, E1_DIR) && HAS_E1_ENABLE)
|
|
|
|
|
#if !(PINS_EXIST(E1_STEP, E1_DIR) && HAS_E1_ENABLE)
|
|
|
|
|
#error "E1_STEP_PIN, E1_DIR_PIN, or E1_ENABLE_PIN not defined for this board."
|
|
|
|
|
#endif
|
|
|
|
|
#if E_STEPPERS > 2
|
|
|
|
|
#if !(PIN_EXISTS(E2_STEP, E2_DIR) && HAS_E2_ENABLE)
|
|
|
|
|
#if !(PINS_EXIST(E2_STEP, E2_DIR) && HAS_E2_ENABLE)
|
|
|
|
|
#error "E2_STEP_PIN, E2_DIR_PIN, or E2_ENABLE_PIN not defined for this board."
|
|
|
|
|
#endif
|
|
|
|
|
#if E_STEPPERS > 3
|
|
|
|
|
#if !(PIN_EXISTS(E3_STEP, E3_DIR) && HAS_E3_ENABLE)
|
|
|
|
|
#if !(PINS_EXIST(E3_STEP, E3_DIR) && HAS_E3_ENABLE)
|
|
|
|
|
#error "E3_STEP_PIN, E3_DIR_PIN, or E3_ENABLE_PIN not defined for this board."
|
|
|
|
|
#endif
|
|
|
|
|
#if E_STEPPERS > 4
|
|
|
|
|
#if !(PIN_EXISTS(E4_STEP, E4_DIR) && HAS_E4_ENABLE)
|
|
|
|
|
#if !(PINS_EXIST(E4_STEP, E4_DIR) && HAS_E4_ENABLE)
|
|
|
|
|
#error "E4_STEP_PIN, E4_DIR_PIN, or E4_ENABLE_PIN not defined for this board."
|
|
|
|
|
#endif
|
|
|
|
|
#if E_STEPPERS > 5
|
|
|
|
|
#if !(PIN_EXISTS(E5_STEP, E5_DIR) && HAS_E5_ENABLE)
|
|
|
|
|
#if !(PINS_EXIST(E5_STEP, E5_DIR) && HAS_E5_ENABLE)
|
|
|
|
|
#error "E5_STEP_PIN, E5_DIR_PIN, or E5_ENABLE_PIN not defined for this board."
|
|
|
|
|
#endif
|
|
|
|
|
#if E_STEPPERS > 6
|
|
|
|
|
#if !(PIN_EXISTS(E6_STEP, E6_DIR) && HAS_E6_ENABLE)
|
|
|
|
|
#if !(PINS_EXIST(E6_STEP, E6_DIR) && HAS_E6_ENABLE)
|
|
|
|
|
#error "E6_STEP_PIN, E6_DIR_PIN, or E6_ENABLE_PIN not defined for this board."
|
|
|
|
|
#endif
|
|
|
|
|
#if E_STEPPERS > 7
|
|
|
|
|
#if !(PIN_EXISTS(E7_STEP, E7_DIR) && HAS_E7_ENABLE)
|
|
|
|
|
#if !(PINS_EXIST(E7_STEP, E7_DIR) && HAS_E7_ENABLE)
|
|
|
|
|
#error "E7_STEP_PIN, E7_DIR_PIN, or E7_ENABLE_PIN not defined for this board."
|
|
|
|
|
#endif
|
|
|
|
|
#endif // E_STEPPERS > 7
|
|
|
|
|
@ -1922,7 +1925,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
|
|
|
|
/**
|
|
|
|
|
* RGB_LED Requirements
|
|
|
|
|
*/
|
|
|
|
|
#define _RGB_TEST (PIN_EXISTS(RGB_LED_R, RGB_LED_G, RGB_LED_B))
|
|
|
|
|
#define _RGB_TEST (PINS_EXIST(RGB_LED_R, RGB_LED_G, RGB_LED_B))
|
|
|
|
|
#if ENABLED(PRINTER_EVENT_LEDS) && !HAS_COLOR_LEDS
|
|
|
|
|
#error "PRINTER_EVENT_LEDS requires BLINKM, PCA9533, PCA9632, RGB_LED, RGBW_LED or NEOPIXEL_LED."
|
|
|
|
|
#elif ENABLED(RGB_LED)
|
|
|
|
|
@ -2076,7 +2079,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
|
|
|
|
/**
|
|
|
|
|
* Check existing RX/TX pins against enable TMC UART drivers.
|
|
|
|
|
*/
|
|
|
|
|
#define INVALID_TMC_UART(ST) (AXIS_HAS_UART(ST) && !(defined(ST##_HARDWARE_SERIAL) || (PIN_EXISTS(ST##_SERIAL_RX, ST##_SERIAL_TX))))
|
|
|
|
|
#define INVALID_TMC_UART(ST) (AXIS_HAS_UART(ST) && !(defined(ST##_HARDWARE_SERIAL) || (PINS_EXIST(ST##_SERIAL_RX, ST##_SERIAL_TX))))
|
|
|
|
|
#if INVALID_TMC_UART(X)
|
|
|
|
|
#error "TMC2208 or TMC2209 on X requires X_HARDWARE_SERIAL or X_SERIAL_(RX|TX)_PIN."
|
|
|
|
|
#elif INVALID_TMC_UART(X2)
|
|
|
|
|
@ -2235,11 +2238,11 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
|
|
|
|
|
|
|
|
|
|
// Sensorless homing is required for both combined steppers in an H-bot
|
|
|
|
|
#if CORE_IS_XY && X_SENSORLESS != Y_SENSORLESS
|
|
|
|
|
#error "CoreXY requires both X and Y to use sensorless homing if either does."
|
|
|
|
|
#elif CORE_IS_XZ && X_SENSORLESS != Z_SENSORLESS
|
|
|
|
|
#error "CoreXZ requires both X and Z to use sensorless homing if either does."
|
|
|
|
|
#elif CORE_IS_YZ && Y_SENSORLESS != Z_SENSORLESS
|
|
|
|
|
#error "CoreYZ requires both Y and Z to use sensorless homing if either does."
|
|
|
|
|
#error "CoreXY requires both X and Y to use sensorless homing if either one does."
|
|
|
|
|
#elif CORE_IS_XZ && X_SENSORLESS != Z_SENSORLESS && !HOMING_Z_WITH_PROBE
|
|
|
|
|
#error "CoreXZ requires both X and Z to use sensorless homing if either one does."
|
|
|
|
|
#elif CORE_IS_YZ && Y_SENSORLESS != Z_SENSORLESS && !HOMING_Z_WITH_PROBE
|
|
|
|
|
#error "CoreYZ requires both Y and Z to use sensorless homing if either one does."
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
// Other TMC feature requirements
|
|
|
|
|
@ -2438,7 +2441,7 @@ static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
|
|
|
|
|
#error "PRINTCOUNTER requires EEPROM_SETTINGS. Please update your Configuration."
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if ENABLED(USB_FLASH_DRIVE_SUPPORT) && !PIN_EXISTS(USB_CS, USB_INTR)
|
|
|
|
|
#if ENABLED(USB_FLASH_DRIVE_SUPPORT) && !PINS_EXIST(USB_CS, USB_INTR)
|
|
|
|
|
#error "USB_CS_PIN and USB_INTR_PIN are required for USB_FLASH_DRIVE_SUPPORT."
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
@ -2646,6 +2649,6 @@ static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
|
|
|
|
|
* Check to make sure MONITOR_DRIVER_STATUS isn't enabled
|
|
|
|
|
* on boards where TMC drivers share the SPI bus with SD.
|
|
|
|
|
*/
|
|
|
|
|
#if TMC_HAS_SPI && ALL(MONITOR_DRIVER_STATUS, SDSUPPORT, USES_SHARED_SPI)
|
|
|
|
|
#if HAS_TMC_SPI && ALL(MONITOR_DRIVER_STATUS, SDSUPPORT, USES_SHARED_SPI)
|
|
|
|
|
#error "MONITOR_DRIVER_STATUS and SDSUPPORT cannot be used together on boards with shared SPI."
|
|
|
|
|
#endif
|
|
|
|
|
|
Scott Lahteine