Add bootloader files for ATmega1284/Sanguino

Added the optiboot bootloader, uses only 512kB of FLASH Includes .hex file is for 20MHz µC Clock and serial speed of 57k6
2013-02-27 22:34:36 +01:00
parent 5bfba7720e
commit f991bf23b2
6 changed files with 2195 additions and 0 deletions
--- a/ArduinoAddons/Arduino_0.xx/Sanguino/bootloaders/atmega1284p/pin_defs.h
+++ b/ArduinoAddons/Arduino_0.xx/Sanguino/bootloaders/atmega1284p/pin_defs.h
@ -0,0 +1,81 @@
+#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega88) || defined(__AVR_ATmega8__) || defined(__AVR_ATmega88__)
+/* Onboard LED is connected to pin PB5 in Arduino NG, Diecimila, and Duemilanove */
+#define LED_DDR     DDRB
+#define LED_PORT    PORTB
+#define LED_PIN     PINB
+#define LED         PINB5
+
+/* Ports for soft UART */
+#ifdef SOFT_UART
+#define UART_PORT   PORTD
+#define UART_PIN    PIND
+#define UART_DDR    DDRD
+#define UART_TX_BIT 1
+#define UART_RX_BIT 0
+#endif
+#endif
+
+#if defined(__AVR_ATmega8__)
+  //Name conversion R.Wiersma
+  #define UCSR0A        UCSRA
+  #define UDR0          UDR
+  #define UDRE0         UDRE
+  #define RXC0          RXC
+  #define FE0           FE
+  #define TIFR1         TIFR
+  #define WDTCSR        WDTCR
+#endif
+
+/* Luminet support */
+#if defined(__AVR_ATtiny84__)
+/* Red LED is connected to pin PA4 */
+#define LED_DDR     DDRA
+#define LED_PORT    PORTA
+#define LED_PIN     PINA
+#define LED         PINA4
+/* Ports for soft UART - left port only for now. TX/RX on PA2/PA3 */
+#ifdef SOFT_UART
+#define UART_PORT   PORTA
+#define UART_PIN    PINA
+#define UART_DDR    DDRA
+#define UART_TX_BIT 2
+#define UART_RX_BIT 3
+#endif
+#endif
+
+/* Sanguino support */
+#if defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)
+/* Onboard LED is connected to pin PB0 on Sanguino */
+#define LED_DDR     DDRB
+#define LED_PORT    PORTB
+#define LED_PIN     PINB
+#define LED         PINB0
+
+/* Ports for soft UART */
+#ifdef SOFT_UART
+#define UART_PORT   PORTD
+#define UART_PIN    PIND
+#define UART_DDR    DDRD
+#define UART_TX_BIT 1
+#define UART_RX_BIT 0
+#endif
+#endif
+
+/* Mega support */
+#if defined(__AVR_ATmega1280__)
+/* Onboard LED is connected to pin PB7 on Arduino Mega */
+#define LED_DDR     DDRB
+#define LED_PORT    PORTB
+#define LED_PIN     PINB
+#define LED         PINB7
+
+/* Ports for soft UART */
+#ifdef SOFT_UART
+#define UART_PORT   PORTE
+#define UART_PIN    PINE
+#define UART_DDR    DDRE
+#define UART_TX_BIT 1
+#define UART_RX_BIT 0
+#endif
+#endif
+