bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Configurable Z move distance (#14593)

Browse Source
This commit is contained in:
MarcelMo 2019-07-30 09:16:26 +02:00 committed by Scott Lahteine
parent 842466f4d9
commit f8aa52346f
119 changed files with 142 additions and 32 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
Marlin/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

2
Marlin/src/lcd/language/language_an.h
View File

@ -72,7 +72,7 @@
#define MSG_MOVE_Y _UxGT("Mover Y")
#define MSG_MOVE_Z _UxGT("Mover Z")
#define MSG_MOVE_E _UxGT("Extrusor")
#define MSG_MOVE_0025MM _UxGT("Mover 0.025mm")
#define MSG_MOVE_Z_DIST _UxGT("Mover %smm")
#define MSG_MOVE_01MM _UxGT("Mover 0.1mm")
#define MSG_MOVE_1MM _UxGT("Mover 1mm")
#define MSG_MOVE_10MM _UxGT("Mover 10mm")

2
Marlin/src/lcd/language/language_bg.h
View File

@ -62,7 +62,7 @@
#define MSG_MOVE_Y _UxGT("Движение по Y")
#define MSG_MOVE_Z _UxGT("Движение по Z")
#define MSG_MOVE_E _UxGT("Екструдер")
#define MSG_MOVE_0025MM _UxGT("Премести с 0.025mm")
#define MSG_MOVE_Z_DIST _UxGT("Премести с %smm")
#define MSG_MOVE_01MM _UxGT("Премести с 0.1mm")
#define MSG_MOVE_1MM _UxGT("Премести с 1mm")
#define MSG_MOVE_10MM _UxGT("Премести с 10mm")

2
Marlin/src/lcd/language/language_ca.h
View File

@ -76,7 +76,7 @@
#define MSG_MOVE_Y _UxGT("Mou Y")
#define MSG_MOVE_Z _UxGT("Mou Z")
#define MSG_MOVE_E _UxGT("Extrusor")
#define MSG_MOVE_0025MM _UxGT("Mou 0.025mm")
#define MSG_MOVE_Z_DIST _UxGT("Mou %smm")
#define MSG_MOVE_01MM _UxGT("Mou 0.1mm")
#define MSG_MOVE_1MM _UxGT("Mou 1mm")
#define MSG_MOVE_10MM _UxGT("Mou 10mm")

2
Marlin/src/lcd/language/language_cz.h
View File

@ -202,7 +202,7 @@
#define MSG_MOVE_Z _UxGT("Posunout Z")
#define MSG_MOVE_E _UxGT("Extrudér")
#define MSG_HOTEND_TOO_COLD _UxGT("Hotend je studený")
#define MSG_MOVE_0025MM _UxGT("Posunout o 0,025mm")
#define MSG_MOVE_Z_DIST _UxGT("Posunout o %smm")
#define MSG_MOVE_01MM _UxGT("Posunout o 0,1mm")
#define MSG_MOVE_1MM _UxGT("Posunout o 1mm")
#define MSG_MOVE_10MM _UxGT("Posunout o 10mm")

2
Marlin/src/lcd/language/language_da.h
View File

@ -72,7 +72,7 @@
#define MSG_MOVE_Y _UxGT("Flyt Y")
#define MSG_MOVE_Z _UxGT("Flyt Z")
#define MSG_MOVE_E _UxGT("Extruder")
#define MSG_MOVE_0025MM _UxGT("Flyt 0.025mm")
#define MSG_MOVE_Z_DIST _UxGT("Flyt %smm")
#define MSG_MOVE_01MM _UxGT("Flyt 0.1mm")
#define MSG_MOVE_1MM _UxGT("Flyt 1mm")
#define MSG_MOVE_10MM _UxGT("Flyt 10mm")

2
Marlin/src/lcd/language/language_de.h
View File

@ -199,7 +199,7 @@
#define MSG_MOVE_Z _UxGT("Bewege Z")
#define MSG_MOVE_E _UxGT("Bewege Extruder")
#define MSG_HOTEND_TOO_COLD _UxGT("Hotend zu kalt")
#define MSG_MOVE_0025MM _UxGT(" 0,025 mm")
#define MSG_MOVE_Z_DIST _UxGT(" %s mm")
#define MSG_MOVE_01MM _UxGT(" 0,1 mm")
#define MSG_MOVE_1MM _UxGT(" 1,0 mm")
#define MSG_MOVE_10MM _UxGT("10,0 mm")

2
Marlin/src/lcd/language/language_el-gr.h
View File

@ -72,7 +72,7 @@
#define MSG_MOVE_Y _UxGT("Μετακίνηση Y")
#define MSG_MOVE_Z _UxGT("Μετακίνηση Z")
#define MSG_MOVE_E _UxGT("Εξωθητήρας")
#define MSG_MOVE_0025MM _UxGT("Μετακίνηση 0,025 μμ")
#define MSG_MOVE_Z_DIST _UxGT("Μετακίνηση %s μμ")
#define MSG_MOVE_01MM _UxGT("Μετακίνηση 0,1 μμ")
#define MSG_MOVE_1MM _UxGT("Μετακίνηση 1 μμ")
#define MSG_MOVE_10MM _UxGT("Μετακίνηση 10 μμ")

2
Marlin/src/lcd/language/language_el.h
View File

@ -72,7 +72,7 @@
#define MSG_MOVE_Y _UxGT("Μετακίνηση Y")
#define MSG_MOVE_Z _UxGT("Μετακίνηση Z")
#define MSG_MOVE_E _UxGT("Εξωθητήρας")
#define MSG_MOVE_0025MM _UxGT("Μετακίνηση 0,025 μμ")
#define MSG_MOVE_Z_DIST _UxGT("Μετακίνηση %s μμ")
#define MSG_MOVE_01MM _UxGT("Μετακίνηση 0,1 μμ")
#define MSG_MOVE_1MM _UxGT("Μετακίνηση 1 μμ")
#define MSG_MOVE_10MM _UxGT("Μετακίνηση 10 μμ")

4
Marlin/src/lcd/language/language_en.h
View File

@ -543,8 +543,8 @@
#ifndef MSG_HOTEND_TOO_COLD
#define MSG_HOTEND_TOO_COLD _UxGT("Hotend too cold")
#endif
#ifndef MSG_MOVE_0025MM
#define MSG_MOVE_0025MM _UxGT("Move 0.025mm")
#ifndef MSG_MOVE_Z_DIST
#define MSG_MOVE_Z_DIST _UxGT("Move %smm")
#endif
#ifndef MSG_MOVE_01MM
#define MSG_MOVE_01MM _UxGT("Move 0.1mm")

2
Marlin/src/lcd/language/language_es.h
View File

@ -80,7 +80,7 @@
#define MSG_MOVE_Y _UxGT("Mover Y")
#define MSG_MOVE_Z _UxGT("Mover Z")
#define MSG_MOVE_E _UxGT("Extrusor")
#define MSG_MOVE_0025MM _UxGT("Mover 0.025mm")
#define MSG_MOVE_Z_DIST _UxGT("Mover %smm")
#define MSG_MOVE_01MM _UxGT("Mover 0.1mm")
#define MSG_MOVE_1MM _UxGT("Mover 1mm")
#define MSG_MOVE_10MM _UxGT("Mover 10mm")

2
Marlin/src/lcd/language/language_eu.h
View File

@ -166,7 +166,7 @@
#define MSG_MOVE_Y _UxGT("Mugitu Y")
#define MSG_MOVE_Z _UxGT("Mugitu Z")
#define MSG_MOVE_E _UxGT("Estrusorea")
#define MSG_MOVE_0025MM _UxGT("Mugitu 0.025mm")
#define MSG_MOVE_Z_DIST _UxGT("Mugitu %smm")
#define MSG_MOVE_01MM _UxGT("Mugitu 0.1mm")
#define MSG_MOVE_1MM _UxGT("Mugitu 1mm")
#define MSG_MOVE_10MM _UxGT("Mugitu 10mm")

2
Marlin/src/lcd/language/language_fi.h
View File

@ -65,7 +65,7 @@
#define MSG_MOVE_Y _UxGT("Liikuta Y")
#define MSG_MOVE_Z _UxGT("Liikuta Z")
#define MSG_MOVE_E _UxGT("Extruder")
#define MSG_MOVE_0025MM _UxGT("Liikuta 0.025mm")
#define MSG_MOVE_Z_DIST _UxGT("Liikuta %smm")
#define MSG_MOVE_01MM _UxGT("Liikuta 0.1mm")
#define MSG_MOVE_1MM _UxGT("Liikuta 1mm")
#define MSG_MOVE_10MM _UxGT("Liikuta 10mm")

2
Marlin/src/lcd/language/language_fr.h
View File

@ -195,7 +195,7 @@
#define MSG_MOVE_Z _UxGT("Déplacer Z")
#define MSG_MOVE_E _UxGT("Extrudeur")
#define MSG_HOTEND_TOO_COLD _UxGT("Buse trop froide")
#define MSG_MOVE_0025MM _UxGT("Déplacer 0.025mm")
#define MSG_MOVE_Z_DIST _UxGT("Déplacer %smm")
#define MSG_MOVE_01MM _UxGT("Déplacer 0.1mm")
#define MSG_MOVE_1MM _UxGT("Déplacer 1mm")
#define MSG_MOVE_10MM _UxGT("Déplacer 10mm")

2
Marlin/src/lcd/language/language_gl.h
View File

@ -72,7 +72,7 @@
#define MSG_MOVE_Y _UxGT("Mover Y")
#define MSG_MOVE_Z _UxGT("Mover Z")
#define MSG_MOVE_E _UxGT("Extrusor")
#define MSG_MOVE_0025MM _UxGT("Mover 0.025mm")
#define MSG_MOVE_Z_DIST _UxGT("Mover %smm")
#define MSG_MOVE_01MM _UxGT("Mover 0.1mm")
#define MSG_MOVE_1MM _UxGT("Mover 1mm")
#define MSG_MOVE_10MM _UxGT("Mover 10mm")

2
Marlin/src/lcd/language/language_hr.h
View File

@ -72,7 +72,7 @@
#define MSG_MOVE_Y _UxGT("Miči Y")
#define MSG_MOVE_Z _UxGT("Miči Z")
#define MSG_MOVE_E _UxGT("Extruder")
#define MSG_MOVE_0025MM _UxGT("Miči 0.025mm")
#define MSG_MOVE_Z_DIST _UxGT("Miči %smm")
#define MSG_MOVE_01MM _UxGT("Miči 0.1mm")
#define MSG_MOVE_1MM _UxGT("Miči 1mm")
#define MSG_MOVE_10MM _UxGT("Miči 10mm")

2
Marlin/src/lcd/language/language_it.h
View File

@ -197,7 +197,7 @@
#define MSG_MOVE_Z _UxGT("Muovi Z")
#define MSG_MOVE_E _UxGT("Estrusore")
#define MSG_HOTEND_TOO_COLD _UxGT("Ugello freddo")
#define MSG_MOVE_0025MM _UxGT("Muovi di 0.025mm")
#define MSG_MOVE_Z_DIST _UxGT("Muovi di %smm")
#define MSG_MOVE_01MM _UxGT("Muovi di 0.1mm")
#define MSG_MOVE_1MM _UxGT("Muovi di 1mm")
#define MSG_MOVE_10MM _UxGT("Muovi di 10mm")

2
Marlin/src/lcd/language/language_jp-kana.h
View File

@ -82,7 +82,7 @@
#define MSG_MOVE_Y _UxGT("Yジク イドウ") // "Move Y"
#define MSG_MOVE_Z _UxGT("Zジク イドウ") // "Move Z"
#define MSG_MOVE_E _UxGT("エクストルーダー") // "Extruder"
#define MSG_MOVE_0025MM _UxGT("0.025mm イドウ") // "Move 0.025mm"
#define MSG_MOVE_Z_DIST _UxGT("%smm イドウ") // "Move 0.025mm"
#define MSG_MOVE_01MM _UxGT("0.1mm イドウ") // "Move 0.1mm"
#define MSG_MOVE_1MM _UxGT(" 1mm イドウ") // "Move 1mm"
#define MSG_MOVE_10MM _UxGT(" 10mm イドウ") // "Move 10mm"

2
Marlin/src/lcd/language/language_ko_KR.h
View File

@ -177,7 +177,7 @@
#define MSG_MOVE_Y _UxGT("Move Y")
#define MSG_MOVE_Z _UxGT("Move Z")
#define MSG_MOVE_E _UxGT("Extruder")
#define MSG_MOVE_0025MM _UxGT("Move 0.025mm")
#define MSG_MOVE_Z_DIST _UxGT("Move %smm")
#define MSG_MOVE_01MM _UxGT("Move 0.1mm")
#define MSG_MOVE_1MM _UxGT("Move 1mm")
#define MSG_MOVE_10MM _UxGT("Move 10mm")

2
Marlin/src/lcd/language/language_nl.h
View File

@ -80,7 +80,7 @@
#define MSG_MOVE_Y _UxGT("Verplaats Y")
#define MSG_MOVE_Z _UxGT("Verplaats Z")
#define MSG_MOVE_E _UxGT("Extruder")
#define MSG_MOVE_0025MM _UxGT("Verplaats 0.025mm")
#define MSG_MOVE_Z_DIST _UxGT("Verplaats %smm")
#define MSG_MOVE_01MM _UxGT("Verplaats 0.1mm")
#define MSG_MOVE_1MM _UxGT("Verplaats 1mm")
#define MSG_MOVE_10MM _UxGT("Verplaats 10mm")

2
Marlin/src/lcd/language/language_pl.h
View File

@ -70,7 +70,7 @@
#define MSG_MOVE_Y _UxGT("Przesuń w Y")
#define MSG_MOVE_Z _UxGT("Przesuń w Z")
#define MSG_MOVE_E _UxGT("Ekstruzja (os E)")
#define MSG_MOVE_0025MM _UxGT("Przesuń co .025mm")
#define MSG_MOVE_Z_DIST _UxGT("Przesuń co %smm")
#define MSG_MOVE_01MM _UxGT("Przesuń co .1mm")
#define MSG_MOVE_1MM _UxGT("Przesuń co 1mm")
#define MSG_MOVE_10MM _UxGT("Przesuń co 10mm")

2
Marlin/src/lcd/language/language_pt-br.h
View File

@ -189,7 +189,7 @@
#define MSG_MOVE_Z _UxGT("Mover Z")
#define MSG_MOVE_E _UxGT("Mover Extrusor")
#define MSG_HOTEND_TOO_COLD _UxGT("Extrus. mto fria")
#define MSG_MOVE_0025MM _UxGT("Mover 0.025mm")
#define MSG_MOVE_Z_DIST _UxGT("Mover %smm")
#define MSG_MOVE_01MM _UxGT("Mover 0.1mm")
#define MSG_MOVE_1MM _UxGT("Mover 1mm")
#define MSG_MOVE_10MM _UxGT("Mover 10mm")

2
Marlin/src/lcd/language/language_pt.h
View File

@ -70,7 +70,7 @@
#define MSG_MOVE_Y _UxGT("Mover Y")
#define MSG_MOVE_Z _UxGT("Mover Z")
#define MSG_MOVE_E _UxGT("Mover Extrusor")
#define MSG_MOVE_0025MM _UxGT("Mover 0.025mm")
#define MSG_MOVE_Z_DIST _UxGT("Mover %smm")
#define MSG_MOVE_01MM _UxGT("Mover 0.1mm")
#define MSG_MOVE_1MM _UxGT("Mover 1mm")
#define MSG_MOVE_10MM _UxGT("Mover 10mm")

2
Marlin/src/lcd/language/language_ru.h
View File

@ -168,7 +168,7 @@
#define MSG_MOVE_Y _UxGT("Движение по Y")
#define MSG_MOVE_Z _UxGT("Движение по Z")
#define MSG_MOVE_E _UxGT("Экструдер")
#define MSG_MOVE_0025MM _UxGT("Движение 0.025мм")
#define MSG_MOVE_Z_DIST _UxGT("Движение %sмм")
#define MSG_MOVE_01MM _UxGT("Движение 0.1мм")
#define MSG_MOVE_1MM _UxGT("Движение 1мм")
#define MSG_MOVE_10MM _UxGT("Движение 10мм")

2
Marlin/src/lcd/language/language_sk.h
View File

@ -206,7 +206,7 @@
#define MSG_MOVE_Z _UxGT("Posunúť Z")
#define MSG_MOVE_E _UxGT("Extrudér")
#define MSG_HOTEND_TOO_COLD _UxGT("Hotend je studený")
#define MSG_MOVE_0025MM _UxGT("Posunúť o 0,025mm")
#define MSG_MOVE_Z_DIST _UxGT("Posunúť o %smm")
#define MSG_MOVE_01MM _UxGT("Posunúť o 0,1mm")
#define MSG_MOVE_1MM _UxGT("Posunúť o 1mm")
#define MSG_MOVE_10MM _UxGT("Posunúť o 10mm")

2
Marlin/src/lcd/language/language_tr.h
View File

@ -186,7 +186,7 @@
#define MSG_MOVE_Z _UxGT("Z Hareketi")
#define MSG_MOVE_E _UxGT("Ekstruder")
#define MSG_HOTEND_TOO_COLD _UxGT("Nozul Çok Soğuk")
#define MSG_MOVE_0025MM _UxGT("0.025mm")
#define MSG_MOVE_Z_DIST _UxGT("%smm")
#define MSG_MOVE_01MM _UxGT("0.1mm")
#define MSG_MOVE_1MM _UxGT("1mm")
#define MSG_MOVE_10MM _UxGT("10mm")

2
Marlin/src/lcd/language/language_uk.h
View File

@ -72,7 +72,7 @@
#define MSG_MOVE_Y _UxGT("Рух по Y")
#define MSG_MOVE_Z _UxGT("Рух по Z")
#define MSG_MOVE_E _UxGT("Екструдер")
#define MSG_MOVE_0025MM _UxGT("Рух по 0.025mm")
#define MSG_MOVE_Z_DIST _UxGT("Рух по %smm")
#define MSG_MOVE_01MM _UxGT("Рух по 0.1mm")
#define MSG_MOVE_1MM _UxGT("Рух по 1mm")
#define MSG_MOVE_10MM _UxGT("Рух по 10mm")

2
Marlin/src/lcd/language/language_zh_CN.h
View File

@ -164,7 +164,7 @@
#define MSG_MOVE_Y _UxGT("移动Y") //"Move Y"
#define MSG_MOVE_Z _UxGT("移动Z") //"Move Z"
#define MSG_MOVE_E _UxGT("挤出机") //"Extruder"
#define MSG_MOVE_0025MM _UxGT("移动 0.025 mm") //"Move 0.025mm"
#define MSG_MOVE_Z_DIST _UxGT("移动 %s mm") //"Move 0.025mm"
#define MSG_MOVE_01MM _UxGT("移动 0.1 mm") //"Move 0.1mm"
#define MSG_MOVE_1MM _UxGT("移动 1 mm") //"Move 1mm"
#define MSG_MOVE_10MM _UxGT("移动 10 mm") //"Move 10mm"

2
Marlin/src/lcd/language/language_zh_TW.h
View File

@ -164,7 +164,7 @@
#define MSG_MOVE_Y _UxGT("移動Y") //"Move Y"
#define MSG_MOVE_Z _UxGT("移動Z") //"Move Z"
#define MSG_MOVE_E _UxGT("擠出機") //"Extruder"
#define MSG_MOVE_0025MM _UxGT("移動 0.025 mm") //"Move 0.025mm"
#define MSG_MOVE_Z_DIST _UxGT("移動 %s mm") //"Move 0.025mm"
#define MSG_MOVE_01MM _UxGT("移動 0.1 mm") //"Move 0.1mm"
#define MSG_MOVE_1MM _UxGT("移動 1 mm") //"Move 1mm"
#define MSG_MOVE_10MM _UxGT("移動 10 mm") //"Move 10mm"

26
Marlin/src/lcd/menu/menu_motion.cpp
View File

@ -29,6 +29,13 @@
#if HAS_LCD_MENU
#include "menu.h"
#include "../lcdprint.h"
#if HAS_GRAPHICAL_LCD
#include "../dogm/ultralcd_DOGM.h"
#endif
#include "../../module/motion.h"
#if ENABLED(DELTA)
@ -230,6 +237,10 @@ inline void lcd_move_e() { _lcd_move_e(); }
// "Motion" > "Move Xmm" > "Move XYZ" submenu
//
#ifndef SHORT_MANUAL_Z_MOVE
#define SHORT_MANUAL_Z_MOVE 0.025
#endif
screenFunc_t _manual_move_func_ptr;
void _goto_manual_move(const float scale) {
@ -240,7 +251,6 @@ void _goto_manual_move(const float scale) {
void menu_move_10mm() { _goto_manual_move(10); }
void menu_move_1mm() { _goto_manual_move( 1); }
void menu_move_01mm() { _goto_manual_move( 0.1f); }
void menu_move_0025mm() { _goto_manual_move( 0.025f); }
void _menu_move_distance(const AxisEnum axis, const screenFunc_t func, const int8_t eindex=-1) {
_manual_move_func_ptr = func;
@ -268,8 +278,18 @@ void _menu_move_distance(const AxisEnum axis, const screenFunc_t func, const int
MENU_ITEM(submenu, MSG_MOVE_10MM, menu_move_10mm);
MENU_ITEM(submenu, MSG_MOVE_1MM, menu_move_1mm);
MENU_ITEM(submenu, MSG_MOVE_01MM, menu_move_01mm);
if (axis == Z_AXIS)
MENU_ITEM(submenu, MSG_MOVE_0025MM, menu_move_0025mm);
if (axis == Z_AXIS && (SHORT_MANUAL_Z_MOVE) > 0.0f && (SHORT_MANUAL_Z_MOVE) < 0.1f) {
MENU_ITEM(submenu, "", []{ _goto_manual_move(float(SHORT_MANUAL_Z_MOVE)); });
MENU_ITEM_ADDON_START(1);
char tmp[20], numstr[10];
// Determine digits needed right of decimal
const uint8_t digs = !UNEAR_ZERO((SHORT_MANUAL_Z_MOVE) * 1000 - int((SHORT_MANUAL_Z_MOVE) * 1000)) ? 4 :
!UNEAR_ZERO((SHORT_MANUAL_Z_MOVE) * 100 - int((SHORT_MANUAL_Z_MOVE) * 100)) ? 3 : 2;
dtostrf(SHORT_MANUAL_Z_MOVE, 1, digs, numstr);
sprintf_P(tmp, PSTR(MSG_MOVE_Z_DIST), numstr);
LCDPRINT(tmp);
MENU_ITEM_ADDON_END();
}
}
END_MENU();
}

1
config/default/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/3DFabXYZ/Migbot/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/AlephObjects/TAZ4/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/AliExpress/UM2pExt/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Anet/A2/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Anet/A2plus/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Anet/A6/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Anet/A8/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Anet/A8plus/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Anet/E16/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/AnyCubic/i3/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/ArmEd/Configuration_adv.h
View File

@ -654,6 +654,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/BIBO/TouchX/default/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/BQ/Hephestos/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 120*60, 120*60, 18*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/BQ/Hephestos_2/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
//#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/BQ/WITBOX/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 120*60, 120*60, 18*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Cartesio/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Creality/CR-10/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Creality/CR-10S/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Creality/CR-10_5S/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Creality/CR-10mini/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Creality/CR-20 Pro/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Creality/CR-20/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Creality/CR-8/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Creality/Ender-2/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 0 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Creality/Ender-3/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Creality/Ender-4/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Creality/Ender-5/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Einstart-S/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/FYSETC/AIO_II/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/FYSETC/F6_13/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Felix/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/FlashForge/CreatorPro/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
//#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/FolgerTech/i3-2020/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Formbot/Raptor/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Formbot/T_Rex_2+/Configuration_adv.h
View File

@ -654,6 +654,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Formbot/T_Rex_3/Configuration_adv.h
View File

@ -654,6 +654,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Geeetech/A10/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Geeetech/A10M/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Geeetech/A20M/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Geeetech/MeCreator2/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Infitary/i3-M508/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/JGAurora/A1/Configuration_adv.h
View File

@ -655,6 +655,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/JGAurora/A5/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 80*60, 80*60, 12*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/JGAurora/A5S/Configuration_adv.h
View File

@ -655,6 +655,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/MakerParts/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Malyan/M150/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Malyan/M200/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Micromake/C1/enhanced/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Mks/Robin/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Mks/Sbase/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/RapideLite/RL200/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/RigidBot/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/SCARA/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 10*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Sanguinololu/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Tevo/Tarantula Pro/Configuration_adv.h
View File

@ -646,6 +646,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/TheBorg/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/TinyBoy2/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Tronxy/X3A/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/Tronxy/X5S-2E/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/UltiMachine/Archim1/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/UltiMachine/Archim2/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

1
config/examples/VORONDesign/Configuration_adv.h
View File

@ -650,6 +650,7 @@
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen

Some files were not shown because too many files have changed in this diff Show More