diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index a0929dc96f..baabbb50aa 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -147,9 +147,9 @@
 //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
 //#define EXTRUDER_RUNOUT_PREVENT
 #define EXTRUDER_RUNOUT_MINTEMP 190
-#define EXTRUDER_RUNOUT_SECONDS 30.
-#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
-#define EXTRUDER_RUNOUT_SPEED 1500.  //extrusion speed
+#define EXTRUDER_RUNOUT_SECONDS 30
+#define EXTRUDER_RUNOUT_ESTEPS 14   // mm filament
+#define EXTRUDER_RUNOUT_SPEED 1500  // extrusion speed
 #define EXTRUDER_RUNOUT_EXTRUDE 100
 
 // @section temperature
diff --git a/Marlin/example_configurations/Cartesio/Configuration_adv.h b/Marlin/example_configurations/Cartesio/Configuration_adv.h
index c8d9be298e..e7f4f10e83 100644
--- a/Marlin/example_configurations/Cartesio/Configuration_adv.h
+++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h
@@ -147,9 +147,9 @@
 //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
 //#define EXTRUDER_RUNOUT_PREVENT
 #define EXTRUDER_RUNOUT_MINTEMP 190
-#define EXTRUDER_RUNOUT_SECONDS 30.
-#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
-#define EXTRUDER_RUNOUT_SPEED 1500.  //extrusion speed
+#define EXTRUDER_RUNOUT_SECONDS 30
+#define EXTRUDER_RUNOUT_ESTEPS 14   // mm filament
+#define EXTRUDER_RUNOUT_SPEED 1500  // extrusion speed
 #define EXTRUDER_RUNOUT_EXTRUDE 100
 
 // @section temperature
diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h
index d739c56a8f..8de3db946b 100644
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@@ -147,9 +147,9 @@
 //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
 //#define EXTRUDER_RUNOUT_PREVENT
 #define EXTRUDER_RUNOUT_MINTEMP 190
-#define EXTRUDER_RUNOUT_SECONDS 30.
-#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
-#define EXTRUDER_RUNOUT_SPEED 1500.  //extrusion speed
+#define EXTRUDER_RUNOUT_SECONDS 30
+#define EXTRUDER_RUNOUT_ESTEPS 14   // mm filament
+#define EXTRUDER_RUNOUT_SPEED 1500  // extrusion speed
 #define EXTRUDER_RUNOUT_EXTRUDE 100
 
 // @section temperature
diff --git a/Marlin/example_configurations/Hephestos/Configuration_adv.h b/Marlin/example_configurations/Hephestos/Configuration_adv.h
index 8644b5f18b..727fe6c0e6 100644
--- a/Marlin/example_configurations/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos/Configuration_adv.h
@@ -147,9 +147,9 @@
 //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
 //#define EXTRUDER_RUNOUT_PREVENT
 #define EXTRUDER_RUNOUT_MINTEMP 190
-#define EXTRUDER_RUNOUT_SECONDS 30.
-#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
-#define EXTRUDER_RUNOUT_SPEED 1500.  //extrusion speed
+#define EXTRUDER_RUNOUT_SECONDS 30
+#define EXTRUDER_RUNOUT_ESTEPS 14   // mm filament
+#define EXTRUDER_RUNOUT_SPEED 1500  // extrusion speed
 #define EXTRUDER_RUNOUT_EXTRUDE 100
 
 // @section temperature
diff --git a/Marlin/example_configurations/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
index 74a22c17dd..24aa11cdc1 100644
--- a/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
@@ -147,9 +147,9 @@
 //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
 //#define EXTRUDER_RUNOUT_PREVENT
 #define EXTRUDER_RUNOUT_MINTEMP 190
-#define EXTRUDER_RUNOUT_SECONDS 30.
-#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
-#define EXTRUDER_RUNOUT_SPEED 1500.  //extrusion speed
+#define EXTRUDER_RUNOUT_SECONDS 30
+#define EXTRUDER_RUNOUT_ESTEPS 14   // mm filament
+#define EXTRUDER_RUNOUT_SPEED 1500  // extrusion speed
 #define EXTRUDER_RUNOUT_EXTRUDE 100
 
 // @section temperature
diff --git a/Marlin/example_configurations/K8200/Configuration_adv.h b/Marlin/example_configurations/K8200/Configuration_adv.h
index ea42050278..491a8d9238 100644
--- a/Marlin/example_configurations/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/K8200/Configuration_adv.h
@@ -153,9 +153,9 @@
 //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
 //#define EXTRUDER_RUNOUT_PREVENT
 #define EXTRUDER_RUNOUT_MINTEMP 190
-#define EXTRUDER_RUNOUT_SECONDS 30.
-#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
-#define EXTRUDER_RUNOUT_SPEED 1500.  //extrusion speed
+#define EXTRUDER_RUNOUT_SECONDS 30
+#define EXTRUDER_RUNOUT_ESTEPS 14   // mm filament
+#define EXTRUDER_RUNOUT_SPEED 1500  // extrusion speed
 #define EXTRUDER_RUNOUT_EXTRUDE 100
 
 // @section temperature
diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h
index 4f38b0c4c3..020804017b 100644
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@@ -147,9 +147,9 @@
 //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
 //#define EXTRUDER_RUNOUT_PREVENT
 #define EXTRUDER_RUNOUT_MINTEMP 190
-#define EXTRUDER_RUNOUT_SECONDS 30.
-#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
-#define EXTRUDER_RUNOUT_SPEED 1500.  //extrusion speed
+#define EXTRUDER_RUNOUT_SECONDS 30
+#define EXTRUDER_RUNOUT_ESTEPS 14   // mm filament
+#define EXTRUDER_RUNOUT_SPEED 1500  // extrusion speed
 #define EXTRUDER_RUNOUT_EXTRUDE 100
 
 // @section temperature
diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h
index 489e57b19a..d232c6bebd 100644
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@@ -147,9 +147,9 @@
 //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
 //#define EXTRUDER_RUNOUT_PREVENT
 #define EXTRUDER_RUNOUT_MINTEMP 180
-#define EXTRUDER_RUNOUT_SECONDS 30.
-#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
-#define EXTRUDER_RUNOUT_SPEED 180.  //extrusion speed
+#define EXTRUDER_RUNOUT_SECONDS 30
+#define EXTRUDER_RUNOUT_ESTEPS 14   // mm filament
+#define EXTRUDER_RUNOUT_SPEED 180   // extrusion speed
 #define EXTRUDER_RUNOUT_EXTRUDE 100
 
 // @section temperature
diff --git a/Marlin/example_configurations/TAZ4/Configuration_adv.h b/Marlin/example_configurations/TAZ4/Configuration_adv.h
index 7c3bba3740..ca80621bab 100644
--- a/Marlin/example_configurations/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/TAZ4/Configuration_adv.h
@@ -147,9 +147,9 @@
 //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
 //#define EXTRUDER_RUNOUT_PREVENT
 #define EXTRUDER_RUNOUT_MINTEMP 190
-#define EXTRUDER_RUNOUT_SECONDS 30.
-#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
-#define EXTRUDER_RUNOUT_SPEED 1500.  //extrusion speed
+#define EXTRUDER_RUNOUT_SECONDS 30
+#define EXTRUDER_RUNOUT_ESTEPS 14   // mm filament
+#define EXTRUDER_RUNOUT_SPEED 1500  // extrusion speed
 #define EXTRUDER_RUNOUT_EXTRUDE 100
 
 // @section temperature
diff --git a/Marlin/example_configurations/WITBOX/Configuration_adv.h b/Marlin/example_configurations/WITBOX/Configuration_adv.h
index 8644b5f18b..727fe6c0e6 100644
--- a/Marlin/example_configurations/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/WITBOX/Configuration_adv.h
@@ -147,9 +147,9 @@
 //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
 //#define EXTRUDER_RUNOUT_PREVENT
 #define EXTRUDER_RUNOUT_MINTEMP 190
-#define EXTRUDER_RUNOUT_SECONDS 30.
-#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
-#define EXTRUDER_RUNOUT_SPEED 1500.  //extrusion speed
+#define EXTRUDER_RUNOUT_SECONDS 30
+#define EXTRUDER_RUNOUT_ESTEPS 14   // mm filament
+#define EXTRUDER_RUNOUT_SPEED 1500  // extrusion speed
 #define EXTRUDER_RUNOUT_EXTRUDE 100
 
 // @section temperature
diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h b/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
index 35a745d1b3..8e0653dbb2 100644
--- a/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
@@ -147,9 +147,9 @@
 //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
 //#define EXTRUDER_RUNOUT_PREVENT
 #define EXTRUDER_RUNOUT_MINTEMP 190
-#define EXTRUDER_RUNOUT_SECONDS 30.
-#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
-#define EXTRUDER_RUNOUT_SPEED 1500.  //extrusion speed
+#define EXTRUDER_RUNOUT_SECONDS 30
+#define EXTRUDER_RUNOUT_ESTEPS 14   // mm filament
+#define EXTRUDER_RUNOUT_SPEED 1500  // extrusion speed
 #define EXTRUDER_RUNOUT_EXTRUDE 100
 
 // @section temperature
diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h
index 82ca2d6256..af10352282 100644
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@@ -147,9 +147,9 @@
 //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
 //#define EXTRUDER_RUNOUT_PREVENT
 #define EXTRUDER_RUNOUT_MINTEMP 190
-#define EXTRUDER_RUNOUT_SECONDS 30.
-#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
-#define EXTRUDER_RUNOUT_SPEED 1500.  //extrusion speed
+#define EXTRUDER_RUNOUT_SECONDS 30
+#define EXTRUDER_RUNOUT_ESTEPS 14   // mm filament
+#define EXTRUDER_RUNOUT_SPEED 1500  // extrusion speed
 #define EXTRUDER_RUNOUT_EXTRUDE 100
 
 // @section temperature
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
index 7a8eea0073..94f6f134ae 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@@ -147,9 +147,9 @@
 //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
 //#define EXTRUDER_RUNOUT_PREVENT
 #define EXTRUDER_RUNOUT_MINTEMP 190
-#define EXTRUDER_RUNOUT_SECONDS 30.
-#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
-#define EXTRUDER_RUNOUT_SPEED 1500.  //extrusion speed
+#define EXTRUDER_RUNOUT_SECONDS 30
+#define EXTRUDER_RUNOUT_ESTEPS 14   // mm filament
+#define EXTRUDER_RUNOUT_SPEED 1500  // extrusion speed
 #define EXTRUDER_RUNOUT_EXTRUDE 100
 
 // @section temperature
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
index 4b51440656..7ed46feeb8 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
@@ -152,9 +152,9 @@
 //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
 //#define EXTRUDER_RUNOUT_PREVENT
 #define EXTRUDER_RUNOUT_MINTEMP 190
-#define EXTRUDER_RUNOUT_SECONDS 30.
-#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
-#define EXTRUDER_RUNOUT_SPEED 1500.  //extrusion speed
+#define EXTRUDER_RUNOUT_SECONDS 30
+#define EXTRUDER_RUNOUT_ESTEPS 14   // mm filament
+#define EXTRUDER_RUNOUT_SPEED 1500  // extrusion speed
 #define EXTRUDER_RUNOUT_EXTRUDE 100
 
 // @section temperature
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
index fb59b0df4b..117a2ad318 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
@@ -147,9 +147,9 @@
 //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
 //#define EXTRUDER_RUNOUT_PREVENT
 #define EXTRUDER_RUNOUT_MINTEMP 190
-#define EXTRUDER_RUNOUT_SECONDS 30.
-#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
-#define EXTRUDER_RUNOUT_SPEED 1500.  //extrusion speed
+#define EXTRUDER_RUNOUT_SECONDS 30
+#define EXTRUDER_RUNOUT_ESTEPS 14   // mm filament
+#define EXTRUDER_RUNOUT_SPEED 1500  // extrusion speed
 #define EXTRUDER_RUNOUT_EXTRUDE 100
 
 // @section temperature
diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h
index b8c45f2cb6..772f05e5eb 100644
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@@ -147,9 +147,9 @@
 //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
 //#define EXTRUDER_RUNOUT_PREVENT
 #define EXTRUDER_RUNOUT_MINTEMP 190
-#define EXTRUDER_RUNOUT_SECONDS 30.
-#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
-#define EXTRUDER_RUNOUT_SPEED 1500.  //extrusion speed
+#define EXTRUDER_RUNOUT_SECONDS 30
+#define EXTRUDER_RUNOUT_ESTEPS 14   // mm filament
+#define EXTRUDER_RUNOUT_SPEED 1500  // extrusion speed
 #define EXTRUDER_RUNOUT_EXTRUDE 100
 
 // @section temperature
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
index 7da66c7733..78758bd79d 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@@ -147,9 +147,9 @@
 //if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
 //#define EXTRUDER_RUNOUT_PREVENT
 #define EXTRUDER_RUNOUT_MINTEMP 190
-#define EXTRUDER_RUNOUT_SECONDS 30.
-#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
-#define EXTRUDER_RUNOUT_SPEED 1500.  //extrusion speed
+#define EXTRUDER_RUNOUT_SECONDS 30
+#define EXTRUDER_RUNOUT_ESTEPS 14   // mm filament
+#define EXTRUDER_RUNOUT_SPEED 1500  // extrusion speed
 #define EXTRUDER_RUNOUT_EXTRUDE 100
 
 // @section temperature