bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Better Sanguinololu & Graphical Controller (PR#2504)

Browse Source 
- Change suggested at
https://github.com/MarlinFirmware/Marlin/issues/2482#issuecomment-123553
266
This commit is contained in:
Scott Lahteine 2015-07-23 12:33:22 -07:00 committed by Richard Wackerbarth
parent a1154d4a20
commit f7e7862588
1 changed files with 109 additions and 96 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

105
Marlin/pins_SANGUINOLOLU_11.h
View File

@ -22,26 +22,15 @@
#define E0_DIR_PIN 0 #define E0_DIR_PIN 0
#define LED_PIN -1 #define LED_PIN -1
#define FAN_PIN -1 #define FAN_PIN -1
// #if FAN_PIN == 12 || FAN_PIN ==13 #if MB(AZTEEG_X1) || MB(STB_11) || MB(MELZI)
// #define FAN_SOFT_PWM
// #endif
#if MB(MELZI)
#define LED_PIN 27 /* On some broken versions of the Sanguino libraries the pin definitions are wrong, which then needs LED_PIN as pin 28. But you better upgrade your Sanguino libraries! See #368. */
#define FAN_PIN 4 // Works for Panelolu2 too #define FAN_PIN 4 // Works for Panelolu2 too
#endif #if MB(MELZI)
#define LED_PIN 27 // On some broken versions of the Sanguino libraries the pin definitions are wrong, so LED_PIN needs to be 28. But you should upgrade your Sanguino libraries! See #368.
#if MB(STB_11) #elif MB(STB_11)
#define FAN_PIN 4
// Uncomment this if you have the first generation (V1.10) of STBs board
#define LCD_PIN_BL 17 // LCD backlight LED #define LCD_PIN_BL 17 // LCD backlight LED
#endif #endif
#if MB(AZTEEG_X1)
#define FAN_PIN 4
#endif #endif
#ifdef Z_PROBE_SLED #ifdef Z_PROBE_SLED
@ -97,32 +86,28 @@
#define SDPOWER -1 #define SDPOWER -1
#define SDSS 31 #define SDSS 31
/* On some broken versions of the Sanguino libraries the pin definitions are wrong, which then needs SDSS as pin 24. But you better upgrade your Sanguino libraries! See #368. */ /**
* On some broken versions of the Sanguino libraries the pin definitions are wrong,
* which then needs SDSS as pin 24. But you should upgrade your Sanguino libraries! See #368.
*/
//#define SDSS 24 //#define SDSS 24
#ifdef ULTRA_LCD #if defined(ULTRA_LCD) && defined(NEWPANEL)
#ifdef NEWPANEL
//we have no buzzer installed // No buzzer installed
#define BEEPER -1 #define BEEPER -1
//LCD Pins
// LCD Pins
#ifdef DOGLCD #ifdef DOGLCD
#ifdef U8GLIB_ST7920 //SPI GLCD 12864 ST7920 ( like [www.digole.com] ) For Melzi V2.0 #ifdef U8GLIB_ST7920 //SPI GLCD 12864 ST7920 ( like [www.digole.com] ) For Melzi V2.0
#if MB(MELZI) // Melzi board
#define LCD_PINS_RS 30 //CS chip select /SS chip slave select #define LCD_PINS_RS 30 //CS chip select /SS chip slave select
#define LCD_PINS_ENABLE 29 //SID (MOSI) #define LCD_PINS_ENABLE 29 //SID (MOSI)
#define LCD_PINS_D4 17 //SCK (CLK) clock #define LCD_PINS_D4 17 //SCK (CLK) clock
#define BEEPER 27 // Pin 27 is take by LED_Pin, but Melzi LED do nothing with Marlin and I take this pin for BEEPER.... See here > [github.com] , If you want use this pin with Gcode M42 instead BEEPER #define BEEPER 27 // Pin 27 is take by LED_Pin, but Melzi LED do nothing with Marlin and I take this pin for BEEPER.... See here > [github.com] , If you want use this pin with Gcode M42 instead BEEPER
#else #else // Sanguinololu 1.3
// Pins for DOGM SPI LCD Support
#define DOGLCD_A0 30
#define DOGLCD_CS 29
#define LCD_CONTRAST 1
#endif
// Uncomment screen orientation
#define LCD_SCREEN_ROT_0
// #define LCD_SCREEN_ROT_90
// #define LCD_SCREEN_ROT_180
// #define LCD_SCREEN_ROT_270
#else // standard Hitachi LCD controller
#define LCD_PINS_RS 4 #define LCD_PINS_RS 4
#define LCD_PINS_ENABLE 17 #define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 30 #define LCD_PINS_D4 30
@ -130,27 +115,51 @@
#define LCD_PINS_D6 28 #define LCD_PINS_D6 28
#define LCD_PINS_D7 27 #define LCD_PINS_D7 27
#endif #endif
#else // DOGM SPI LCD Support
#define DOGLCD_A0 30
#define DOGLCD_CS 29
#define LCD_CONTRAST 1
#endif
// Uncomment screen orientation
#define LCD_SCREEN_ROT_0
// #define LCD_SCREEN_ROT_90
// #define LCD_SCREEN_ROT_180
// #define LCD_SCREEN_ROT_270
#else // !DOGLCD - Standard Hitachi LCD controller
#define LCD_PINS_RS 4
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 30
#define LCD_PINS_D5 29
#define LCD_PINS_D6 28
#define LCD_PINS_D7 27
#endif // !DOGLCD
//The encoder and click button //The encoder and click button
#define BTN_EN1 11 #define BTN_EN1 11
#define BTN_EN2 10 #define BTN_EN2 10
#ifdef LCD_I2C_PANELOLU2 #ifdef LCD_I2C_PANELOLU2
#if MB(MELZI) #if MB(MELZI)
#define BTN_ENC 29 //the click switch #define BTN_ENC 29
#define LCD_SDSS 30 //to use the SD card reader on the Panelolu2 rather than the melzi board #define LCD_SDSS 30 // Panelolu2 SD card reader rather than the Melzi
#else #else
#define BTN_ENC 30 //the click switch #define BTN_ENC 30
#endif #endif
#else #else
#define BTN_ENC 16 //the click switch #define BTN_ENC 16
#define LCD_SDSS 28 //to use the SD card reader on the smart controller rather than the melzi board #define LCD_SDSS 28 // Smart Controller SD card reader rather than the Melzi
#endif //Panelolu2 #endif //Panelolu2
//not connected to a pin
#define SDCARDDETECT -1 #define SDCARDDETECT -1
#endif //NEWPANEL #elif defined(MAKRPANEL)
#endif //ULTRA_LCD
#ifdef MAKRPANEL
#define BEEPER 29 #define BEEPER 29
// Pins for DOGM SPI LCD Support // Pins for DOGM SPI LCD Support
#define DOGLCD_A0 30 #define DOGLCD_A0 30
@ -166,8 +175,12 @@
//The encoder and click button //The encoder and click button
#define BTN_EN1 11 #define BTN_EN1 11
#define BTN_EN2 10 #define BTN_EN2 10
#define BTN_ENC 16 //the click switch #define BTN_ENC 16
//not connected to a pin
#define SDCARDDETECT -1
#endif //Makrpanel
#define SDCARDDETECT -1
#endif // MAKRPANEL
// #if FAN_PIN == 12 || FAN_PIN ==13
// #define FAN_SOFT_PWM
// #endif