Add Support for ADIMLab Granty
This commit is contained in:
Scott Lahteine
committed by
Scott Lahteine
Scott Lahteine
parent
de122c9bbe
commit
f7aac7a5b0
@@ -1,9 +1,9 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
@@ -19,29 +19,25 @@
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* HJC2560-C Rev2.x pin assignments
|
||||
*/
|
||||
|
||||
/**
|
||||
* Rev 2.x 2 Aug 2018
|
||||
*/
|
||||
|
||||
#ifndef __AVR_ATmega2560__
|
||||
#error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu."
|
||||
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
|
||||
#endif
|
||||
|
||||
// BOARD Info
|
||||
#define DEFAULT_MACHINE_NAME "HCMaker7"
|
||||
#define BOARD_NAME "HJC2560-C"
|
||||
#define BOARD_REV "Rev: 2.1" //主板版本：Rev 2.1, Rs=0.05R
|
||||
#define R_SENSOR "R-sensor: R050" //检测电阻
|
||||
|
||||
// FIRMWARE Info
|
||||
#define FIRMWARE_NAME "Marlin 1-1-9"
|
||||
#define FIRMWARE_REV "Rev: 1.4" //固件版本：Rev 1.4
|
||||
#define DEFAULT_MACHINE_NAME "HCMaker7"
|
||||
#define BOARD_INFO_NAME "HJC2560-C"
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
//#ifndef SERVO0_PIN
|
||||
// #define SERVO0_PIN 11
|
||||
//#endif
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
@@ -49,7 +45,7 @@
|
||||
#define X_STOP_PIN 22
|
||||
#define Y_STOP_PIN 26
|
||||
#define Z_STOP_PIN 29
|
||||
#define EXP_STOP_PIN 28
|
||||
//#define EXP_STOP_PIN 28
|
||||
|
||||
//
|
||||
// Steppers
|
||||
@@ -81,7 +77,7 @@
|
||||
#ifndef MOTOR_CURRENT_PWM_RANGE
|
||||
#define MOTOR_CURRENT_PWM_RANGE 2000
|
||||
#endif
|
||||
#define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250}
|
||||
#define DEFAULT_PWM_MOTOR_CURRENT { 1300, 1300, 1250 }
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
@@ -97,97 +93,78 @@
|
||||
#define HEATER_1_PIN 3
|
||||
#define HEATER_BED_PIN 4
|
||||
|
||||
//#ifndef FAN_PIN
|
||||
#define FAN_PIN 7 //默认不使用PWM_FAN冷却喷嘴，如果需要，则取消注释
|
||||
//#endif
|
||||
#ifndef FAN_PIN
|
||||
#define FAN_PIN 7 //默认不使用PWM_FAN冷却喷嘴，如果需要，则取消注释
|
||||
#endif
|
||||
|
||||
//
|
||||
// Misc. Functions
|
||||
//
|
||||
#define SDSS 53
|
||||
#define SD_DETECT_PIN 39
|
||||
//#define LED_PIN 8
|
||||
#define CASE_LIGHT_PIN 8 //8 默认挤出机风扇作为Case LED，如果需要PWM FAN,则需要将FAN_PIN置为7，LED_PIN置为8
|
||||
//#define LED_PIN 8
|
||||
#define CASE_LIGHT_PIN 8 // 8 默认挤出机风扇作为Case LED，如果需要PWM FAN,则需要将FAN_PIN置为7，LED_PIN置为8
|
||||
|
||||
//#define SAFETY_TRIGGERED_PIN 28 // PIN to detect the safety circuit has triggered
|
||||
//#define MAIN_VOLTAGE_MEASURE_PIN 14 // ANALOG PIN to measure the main voltage, with a 100k - 4k7 resitor divider.
|
||||
|
||||
//
|
||||
// LCD / Controller
|
||||
// M3/M4/M5 - Spindle/Laser Control
|
||||
//
|
||||
#if ENABLED(ULTRA_LCD)
|
||||
|
||||
#define BEEPER_PIN 18
|
||||
|
||||
#if ENABLED(NEWPANEL)
|
||||
|
||||
#if ENABLED(HJC_LCD_SMART_CONTROLLER)
|
||||
#define LCD_PINS_RS 20 //LCD_CS
|
||||
#define LCD_PINS_ENABLE 15 //LCD_SDA
|
||||
#define LCD_PINS_D4 14 //LCD_SCK
|
||||
#define LCD_BACKLIGHT_PIN 5 //LCD_Backlight
|
||||
// #ifndef LCD_CONTRAST_PIN
|
||||
// #define LCD_CONTRAST_PIN 5 //LCD_Contrast
|
||||
// #endif
|
||||
// define digital pin 24 for the filament runout sensor.
|
||||
#ifndef FIL_RUNOUT_PIN
|
||||
#define FIL_RUNOUT_PIN 24 //Filament runout
|
||||
#endif
|
||||
#else
|
||||
#define LCD_PINS_RS 20 //LCD_CS
|
||||
#define LCD_PINS_ENABLE 15 //LCD_SDA
|
||||
#define LCD_PINS_D4 14 //LCD_SCK
|
||||
#define LCD_PINS_D5 21
|
||||
#define LCD_PINS_D6 5
|
||||
#define LCD_PINS_D7 6
|
||||
#endif
|
||||
|
||||
// buttons are directly attached
|
||||
#define BTN_EN1 41
|
||||
#define BTN_EN2 40
|
||||
#define BTN_ENC 19
|
||||
|
||||
#define SD_DETECT_PIN 39
|
||||
|
||||
#else // !NEWPANEL - Old style panel with shift register
|
||||
|
||||
// buttons are attached to a shift register
|
||||
#define SHIFT_CLK 38
|
||||
#define SHIFT_LD 42
|
||||
#define SHIFT_OUT 40
|
||||
#define SHIFT_EN 17
|
||||
|
||||
#define LCD_PINS_RS 16
|
||||
#define LCD_PINS_ENABLE 5
|
||||
#define LCD_PINS_D4 6
|
||||
#define LCD_PINS_D5 21
|
||||
#define LCD_PINS_D6 20
|
||||
#define LCD_PINS_D7 19
|
||||
|
||||
#define SD_DETECT_PIN -1
|
||||
|
||||
#endif // !NEWPANEL
|
||||
|
||||
#endif // ULTRA_LCD
|
||||
|
||||
|
||||
//
|
||||
// M3/M4/M5 - Spindle/Laser Control，默认，主轴/激光器使用独立的PWM引脚(D9)控制
|
||||
// 如果使用了PWM_FAN,Case_Light和Spindle/Laser, 并希望Spindle/Laser使用CASE_Light的线，则将
|
||||
//SPINDLE_LASER_PWM_PIN 定义为8
|
||||
//
|
||||
#if ENABLED(SPINDLE_LASER_ENABLE) // use the LED_PIN for spindle speed control or case light
|
||||
// #undef LED_PIN
|
||||
#if ENABLED(SPINDLE_LASER_ENABLE)
|
||||
#define SPINDLE_DIR_PIN 16
|
||||
#define SPINDLE_LASER_ENABLE_PIN 17 // Pin should have a pullup!
|
||||
#define SPINDLE_LASER_PWM_PIN 9 // MUST BE HARDWARE PWM，
|
||||
//#else
|
||||
// #undef LED_PIN
|
||||
// #define CASE_LIGHT_PIN 7
|
||||
#define SPINDLE_LASER_PWM_PIN 9 // Hardware PWM
|
||||
#endif
|
||||
|
||||
//
|
||||
// Servos
|
||||
// LCD / Controller
|
||||
//
|
||||
//#ifndef SERVO0_PIN
|
||||
// #define SERVO0_PIN 11
|
||||
//#endif
|
||||
#if HAS_SPI_LCD
|
||||
|
||||
#define BEEPER_PIN 18
|
||||
|
||||
#if ENABLED(NEWPANEL)
|
||||
|
||||
#define LCD_PINS_RS 20 // LCD_CS
|
||||
#define LCD_PINS_ENABLE 15 // LCD_SDA
|
||||
#define LCD_PINS_D4 14 // LCD_SCK
|
||||
|
||||
#if ENABLED(HJC_LCD_SMART_CONTROLLER)
|
||||
#define LCD_BACKLIGHT_PIN 5 // LCD_Backlight
|
||||
//#ifndef LCD_CONTRAST_PIN
|
||||
// #define LCD_CONTRAST_PIN 5 // LCD_Contrast
|
||||
//#endif
|
||||
#ifndef FIL_RUNOUT_PIN
|
||||
#define FIL_RUNOUT_PIN 24 // Filament runout
|
||||
#endif
|
||||
#else
|
||||
#define LCD_PINS_D5 21
|
||||
#define LCD_PINS_D6 5
|
||||
#define LCD_PINS_D7 6
|
||||
#endif
|
||||
|
||||
#define BTN_EN1 41
|
||||
#define BTN_EN2 40
|
||||
#define BTN_ENC 19
|
||||
|
||||
#define SD_DETECT_PIN 39
|
||||
|
||||
#else
|
||||
|
||||
// Buttons attached to a shift register
|
||||
#define SHIFT_CLK 38
|
||||
#define SHIFT_LD 42
|
||||
#define SHIFT_OUT 40
|
||||
#define SHIFT_EN 17
|
||||
|
||||
#define LCD_PINS_RS 16
|
||||
#define LCD_PINS_ENABLE 5
|
||||
#define LCD_PINS_D4 6
|
||||
#define LCD_PINS_D5 21
|
||||
#define LCD_PINS_D6 20
|
||||
#define LCD_PINS_D7 19
|
||||
|
||||
#endif // !NEWPANEL
|
||||
|
||||
#endif // HAS_SPI_LCD
|
||||
|
||||
Reference in New Issue
Block a user