bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

signed/unsigned fixes.

Browse Source
This commit is contained in:
daid303
2012-11-06 15:33:49 +01:00
parent 5d471e0f34
commit f6ff0ab767
2 changed files with 8 additions and 8 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
Marlin/Configuration_adv.h
View File

@ -179,7 +179,7 @@
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // no z because of layer shift.
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
// The hardware watchdog should reset the Microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
//#define USE_WATCHDOG
@ -188,7 +188,7 @@
// If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on.
// The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset.
// However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled.
#define WATCHDOG_RESET_MANUAL
//#define WATCHDOG_RESET_MANUAL
#endif
// extruder advance constant (s2/mm3)