From f5bdb8b4d23b1b6f50c91b74620c0b97c9531b10 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Roman=20Morav=C4=8D=C3=ADk?= Date: Sun, 26 Jun 2022 08:51:16 +0200 Subject: [PATCH] =?UTF-8?q?=F0=9F=8C=90=20Update=20Slovak=20language=20(#2?= =?UTF-8?q?4397)?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- Marlin/src/lcd/language/language_sk.h | 92 +++++++++++++++++++++++---- 1 file changed, 78 insertions(+), 14 deletions(-) diff --git a/Marlin/src/lcd/language/language_sk.h b/Marlin/src/lcd/language/language_sk.h index 8920353898..ef1396e81f 100644 --- a/Marlin/src/lcd/language/language_sk.h +++ b/Marlin/src/lcd/language/language_sk.h @@ -50,7 +50,10 @@ namespace Language_sk { LSTR WELCOME_MSG = MACHINE_NAME _UxGT(" pripravená."); LSTR MSG_YES = _UxGT("ÁNO"); LSTR MSG_NO = _UxGT("NIE"); + LSTR MSG_HIGH = _UxGT("VYSOKÁ"); + LSTR MSG_LOW = _UxGT("NÍZKA"); LSTR MSG_BACK = _UxGT("Naspäť"); + LSTR MSG_ERROR = _UxGT("Chyba"); LSTR MSG_MEDIA_ABORTING = _UxGT("Ruším..."); LSTR MSG_MEDIA_INSERTED = _UxGT("Karta vložená"); LSTR MSG_MEDIA_REMOVED = _UxGT("Karta vybraná"); @@ -64,6 +67,8 @@ namespace Language_sk { LSTR MSG_LCD_SOFT_ENDSTOPS = _UxGT("Soft. endstopy"); LSTR MSG_MAIN = _UxGT("Hlavná ponuka"); LSTR MSG_ADVANCED_SETTINGS = _UxGT("Pokročilé nastav."); + LSTR MSG_TOOLBAR_SETUP = _UxGT("Panel nástrojov"); + LSTR MSG_OPTION_DISABLED = _UxGT("Možnosť vypnutá"); LSTR MSG_CONFIGURATION = _UxGT("Konfigurácia"); LSTR MSG_RUN_AUTO_FILES = _UxGT("Auto-štart"); LSTR MSG_DISABLE_STEPPERS = _UxGT("Uvolniť motory"); @@ -77,6 +82,7 @@ namespace Language_sk { LSTR MSG_AUTO_HOME_Z = _UxGT("Domov os Z"); LSTR MSG_FILAMENT_SET = _UxGT("Nastav. filamentu"); LSTR MSG_FILAMENT_MAN = _UxGT("Správa filamentu"); + LSTR MSG_MANUAL_LEVELING = _UxGT("Ručné rovnanie"); LSTR MSG_LEVBED_FL = _UxGT("Ľavý predný"); LSTR MSG_LEVBED_FR = _UxGT("Pravý predný"); LSTR MSG_LEVBED_C = _UxGT("Stred"); @@ -109,7 +115,14 @@ namespace Language_sk { LSTR MSG_PREHEAT_1_ALL = _UxGT("Zahriať ") PREHEAT_1_LABEL _UxGT(" všetko"); LSTR MSG_PREHEAT_1_BEDONLY = _UxGT("Zahriať ") PREHEAT_1_LABEL _UxGT(" podlož"); LSTR MSG_PREHEAT_1_SETTINGS = _UxGT("Zahriať ") PREHEAT_1_LABEL _UxGT(" nast."); - + #ifdef PREHEAT_2_LABEL + LSTR MSG_PREHEAT_2 = _UxGT("Zahriať ") PREHEAT_2_LABEL; + LSTR MSG_PREHEAT_2_SETTINGS = _UxGT("Zahriať ") PREHEAT_2_LABEL _UxGT(" nast."); + #endif + #ifdef PREHEAT_3_LABEL + LSTR MSG_PREHEAT_3 = _UxGT("Zahriať ") PREHEAT_3_LABEL; + LSTR MSG_PREHEAT_3_SETTINGS = _UxGT("Zahriať ") PREHEAT_3_LABEL _UxGT(" nast."); + #endif LSTR MSG_PREHEAT_M = _UxGT("Zahriať $"); LSTR MSG_PREHEAT_M_H = _UxGT("Zahriať $ ~"); LSTR MSG_PREHEAT_M_END = _UxGT("Zahriať $ hotend"); @@ -144,7 +157,8 @@ namespace Language_sk { LSTR MSG_BED_LEVELING = _UxGT("Vyrovnanie podložky"); LSTR MSG_LEVEL_BED = _UxGT("Vyrovnať podložku"); LSTR MSG_BED_TRAMMING = _UxGT("Vyrovnať rohy"); - LSTR MSG_BED_TRAMMING_RAISE = _UxGT("Zdvyhnite podl., kým sa nezopne sonda"); + LSTR MSG_BED_TRAMMING_MANUAL = _UxGT("Ručné vyrovnanie"); + LSTR MSG_BED_TRAMMING_RAISE = _UxGT("Zdvihnite podl., kým sa nezopne sonda"); LSTR MSG_BED_TRAMMING_IN_RANGE = _UxGT("Rohy sú vrámci odchyl. Vyrovnajte podl."); LSTR MSG_BED_TRAMMING_GOOD_POINTS = _UxGT("Dobré body: "); LSTR MSG_BED_TRAMMING_LAST_Z = _UxGT("Posl. Z: "); @@ -155,10 +169,19 @@ namespace Language_sk { LSTR MSG_MESH_VIEW = _UxGT("Zobraz. sieť bodov"); LSTR MSG_EDITING_STOPPED = _UxGT("Koniec úprav siete"); LSTR MSG_NO_VALID_MESH = _UxGT("Neplatná sieť bodov"); + LSTR MSG_ACTIVATE_MESH = _UxGT("Zapnúť vyrovnanie"); LSTR MSG_PROBING_POINT = _UxGT("Skúšam bod"); LSTR MSG_MESH_X = _UxGT("Index X"); LSTR MSG_MESH_Y = _UxGT("Index Y"); + LSTR MSG_MESH_INSET = _UxGT("Vložiť sieť"); + LSTR MSG_MESH_MIN_X = _UxGT("Min. X sieťe"); + LSTR MSG_MESH_MAX_X = _UxGT("Max. X sieťe"); + LSTR MSG_MESH_MIN_Y = _UxGT("Min. Y sieťe"); + LSTR MSG_MESH_MAX_Y = _UxGT("Max. Y sieťe"); + LSTR MSG_MESH_AMAX = _UxGT("Maximál. oblasť"); + LSTR MSG_MESH_CENTER = _UxGT("Stredová oblasť"); LSTR MSG_MESH_EDIT_Z = _UxGT("Hodnota Z"); + LSTR MSG_MESH_CANCEL = _UxGT("Mriežka zrušená"); LSTR MSG_CUSTOM_COMMANDS = _UxGT("Vlastné príkazy"); LSTR MSG_M48_TEST = _UxGT("M48 Test sondy"); LSTR MSG_M48_POINT = _UxGT("M48 Bod"); @@ -177,6 +200,9 @@ namespace Language_sk { LSTR MSG_UBL_TOOLS = _UxGT("Nástroje UBL"); LSTR MSG_UBL_LEVEL_BED = _UxGT("UBL rovnanie"); LSTR MSG_LCD_TILTING_MESH = _UxGT("Vyrovnávam bod"); + LSTR MSG_UBL_TILT_MESH = _UxGT("Nakloniť sieť"); + LSTR MSG_UBL_TILTING_GRID = _UxGT("Veľkosť nakl. siete"); + LSTR MSG_UBL_MESH_TILTED = _UxGT("Sieť naklonená"); LSTR MSG_UBL_MANUAL_MESH = _UxGT("Manuálna sieť bodov"); LSTR MSG_UBL_MESH_WIZARD = _UxGT("Spriev. UBL rovnan."); LSTR MSG_UBL_BC_INSERT = _UxGT("Položte a zmerajte"); @@ -225,6 +251,7 @@ namespace Language_sk { LSTR MSG_UBL_MANUAL_FILLIN = _UxGT("Ručné vyplnenie"); LSTR MSG_UBL_SMART_FILLIN = _UxGT("Chytré vyplnenie"); LSTR MSG_UBL_FILLIN_MESH = _UxGT("Vyplniť mriežku"); + LSTR MSG_UBL_MESH_FILLED = _UxGT("Doplnené chýb. body"); LSTR MSG_UBL_INVALIDATE_ALL = _UxGT("Zrušiť všetko"); LSTR MSG_UBL_INVALIDATE_CLOSEST = _UxGT("Zrušiť najbližší"); LSTR MSG_UBL_FINE_TUNE_ALL = _UxGT("Upraviť všetky"); @@ -233,6 +260,7 @@ namespace Language_sk { LSTR MSG_UBL_STORAGE_SLOT = _UxGT("Pamäťový slot"); LSTR MSG_UBL_LOAD_MESH = _UxGT("Načítať sieť bodov"); LSTR MSG_UBL_SAVE_MESH = _UxGT("Uložiť sieť bodov"); + LSTR MSG_UBL_INVALID_SLOT = _UxGT("Najskôr zvol. slot siete"); LSTR MSG_MESH_LOADED = _UxGT("Sieť %i načítaná"); LSTR MSG_MESH_SAVED = _UxGT("Sieť %i uložená"); LSTR MSG_UBL_NO_STORAGE = _UxGT("Nedostatok miesta"); @@ -325,9 +353,21 @@ namespace Language_sk { LSTR MSG_PID_AUTOTUNE_E = _UxGT("Kalibrácia PID *"); LSTR MSG_PID_CYCLE = _UxGT("Cykly PID"); LSTR MSG_PID_AUTOTUNE_DONE = _UxGT("Kal. PID dokončená"); + LSTR MSG_PID_AUTOTUNE_FAILED = _UxGT("Kal. PID zlyhala!"); + LSTR MSG_BAD_EXTRUDER_NUM = _UxGT("Zlý extrudér"); + LSTR MSG_TEMP_TOO_HIGH = _UxGT("Príliš vysoká tepl."); + LSTR MSG_TIMEOUT = _UxGT("Čas vypršal."); LSTR MSG_PID_BAD_EXTRUDER_NUM = _UxGT("Auto-kal. zlyhala! Zlý extrúder."); LSTR MSG_PID_TEMP_TOO_HIGH = _UxGT("Auto-kal. zlyhala! Príliš vysoká tepl."); LSTR MSG_PID_TIMEOUT = _UxGT("Auto-kal. zlyhala! Čas vypršal."); + LSTR MSG_MPC_MEASURING_AMBIENT = _UxGT("Test. tepl. straty"); + LSTR MSG_MPC_AUTOTUNE = _UxGT("Auto-kal. MPC"); + LSTR MSG_MPC_EDIT = _UxGT("Upraviť * MPC"); + LSTR MSG_MPC_POWER_E = _UxGT("Výkon *"); + LSTR MSG_MPC_BLOCK_HEAT_CAPACITY_E = _UxGT("Blokovať C *"); + LSTR MSG_SENSOR_RESPONSIVENESS_E = _UxGT("Rozliš. senz. *"); + LSTR MSG_MPC_AMBIENT_XFER_COEFF_E = _UxGT("H okolia *"); + LSTR MSG_MPC_AMBIENT_XFER_COEFF_FAN_E = _UxGT("H vent. okolia *"); LSTR MSG_SELECT = _UxGT("Vybrať"); LSTR MSG_SELECT_E = _UxGT("Vybrať *"); LSTR MSG_ACC = _UxGT("Zrýchlenie"); @@ -379,6 +419,9 @@ namespace Language_sk { LSTR MSG_ADVANCE_K_E = _UxGT("K pre posun *"); LSTR MSG_CONTRAST = _UxGT("Kontrast LCD"); LSTR MSG_BRIGHTNESS = _UxGT("Jas LCD"); + LSTR MSG_LCD_TIMEOUT_SEC = _UxGT("Čas. limit LCD (s)"); + LSTR MSG_SCREEN_TIMEOUT = _UxGT("Čas. limit LCD (m)"); + LSTR MSG_BRIGHTNESS_OFF = _UxGT("Podsviet. vyp."); LSTR MSG_STORE_EEPROM = _UxGT("Uložiť nastavenie"); LSTR MSG_LOAD_EEPROM = _UxGT("Načítať nastavenie"); LSTR MSG_RESTORE_DEFAULTS = _UxGT("Obnoviť nastavenie"); @@ -391,6 +434,10 @@ namespace Language_sk { LSTR MSG_RESET_PRINTER = _UxGT("Reštart. tlačiar."); LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Obnoviť"); LSTR MSG_INFO_SCREEN = _UxGT("Info. obrazovka"); + LSTR MSG_INFO_MACHINENAME = _UxGT("Názov stroja"); + LSTR MSG_INFO_SIZE = _UxGT("Rozmer"); + LSTR MSG_INFO_FWVERSION = _UxGT("Verzia firmvéru"); + LSTR MSG_INFO_BUILD = _UxGT("Čas zostavenia"); LSTR MSG_PREPARE = _UxGT("Príprava tlače"); LSTR MSG_TUNE = _UxGT("Doladenie tlače"); LSTR MSG_POWER_MONITOR = _UxGT("Monitor napájania"); @@ -405,6 +452,8 @@ namespace Language_sk { LSTR MSG_BUTTON_RESET = _UxGT("Vynulovať"); LSTR MSG_BUTTON_IGNORE = _UxGT("Ignorovať"); LSTR MSG_BUTTON_CANCEL = _UxGT("Zrušiť"); + LSTR MSG_BUTTON_CONFIRM = _UxGT("Potvrdiť"); + LSTR MSG_BUTTON_CONTINUE = _UxGT("Pokračovať"); LSTR MSG_BUTTON_DONE = _UxGT("Hotovo"); LSTR MSG_BUTTON_BACK = _UxGT("Naspäť"); LSTR MSG_BUTTON_PROCEED = _UxGT("Pokračovať"); @@ -414,6 +463,8 @@ namespace Language_sk { LSTR MSG_BUTTON_PAUSE = _UxGT("Pauza"); LSTR MSG_BUTTON_RESUME = _UxGT("Obnoviť"); LSTR MSG_BUTTON_ADVANCED = _UxGT("Pokročilé"); + LSTR MSG_BUTTON_SAVE = _UxGT("Uložiť"); + LSTR MSG_BUTTON_PURGE = _UxGT("Vytlačiť"); LSTR MSG_PAUSING = _UxGT("Pozastavujem..."); LSTR MSG_PAUSE_PRINT = _UxGT("Pozastaviť tlač"); LSTR MSG_ADVANCED_PAUSE = _UxGT("Pokročil. pauza"); @@ -433,11 +484,15 @@ namespace Language_sk { LSTR MSG_PRINT_PAUSED = _UxGT("Tlač pozastavená"); LSTR MSG_PRINTING = _UxGT("Tlačím..."); LSTR MSG_STOPPING = _UxGT("Zastavujem..."); + LSTR MSG_REMAINING_TIME = _UxGT("Zostávajúci"); LSTR MSG_PRINT_ABORTED = _UxGT("Tlač zrušená"); LSTR MSG_PRINT_DONE = _UxGT("Tlač dokončená"); + LSTR MSG_PRINTER_KILLED = _UxGT("Tlačiareň zastavená!"); + LSTR MSG_TURN_OFF = _UxGT("Vypnite tlačiareň"); LSTR MSG_NO_MOVE = _UxGT("Žiadny pohyb."); LSTR MSG_KILLED = _UxGT("PRERUŠENÉ. "); LSTR MSG_STOPPED = _UxGT("ZASTAVENÉ. "); + LSTR MSG_FWRETRACT = _UxGT("Firmv. retrakcia"); LSTR MSG_CONTROL_RETRACT = _UxGT("Retrakt mm"); LSTR MSG_CONTROL_RETRACT_SWAP = _UxGT("Výmena Re.mm"); LSTR MSG_CONTROL_RETRACTF = _UxGT("Retraktovať V"); @@ -503,6 +558,9 @@ namespace Language_sk { LSTR MSG_ZPROBE_XOFFSET = _UxGT("X ofset"); LSTR MSG_ZPROBE_YOFFSET = _UxGT("Y ofset"); LSTR MSG_ZPROBE_ZOFFSET = _UxGT("Z ofset"); + LSTR MSG_ZPROBE_MARGIN = _UxGT("Hranica sondy"); + LSTR MSG_Z_FEED_RATE = _UxGT("Rýchl. posunu Z"); + LSTR MSG_ENABLE_HS_MODE = _UxGT("Povoliť rež. HS"); LSTR MSG_MOVE_NOZZLE_TO_BED = _UxGT("Pos. trysku k podl."); LSTR MSG_BABYSTEP_X = _UxGT("Babystep X"); LSTR MSG_BABYSTEP_Y = _UxGT("Babystep Y"); @@ -566,30 +624,32 @@ namespace Language_sk { LSTR MSG_CASE_LIGHT_BRIGHTNESS = _UxGT("Jas svetla"); LSTR MSG_KILL_EXPECTED_PRINTER = _UxGT("Nesprávna tlačiareň"); + LSTR MSG_COLORS_GET = _UxGT("Zvoliť farbu"); + LSTR MSG_COLORS_SELECT = _UxGT("Zvoliť farby"); + LSTR MSG_COLORS_APPLIED = _UxGT("Farby aplikované"); + LSTR MSG_COLORS_RED = _UxGT("Červená"); + LSTR MSG_COLORS_GREEN = _UxGT("Zelená"); + LSTR MSG_COLORS_BLUE = _UxGT("Modrá"); + LSTR MSG_COLORS_WHITE = _UxGT("Biela"); + LSTR MSG_UI_LANGUAGE = _UxGT("Jazyk rozhrania"); + LSTR MSG_SOUND_ENABLE = _UxGT("Povoliť zvuky"); + LSTR MSG_LOCKSCREEN = _UxGT("Uzamknúť obrazovku"); + LSTR MSG_LOCKSCREEN_LOCKED = _UxGT("Tlačiareň je uzamknutá,"); + LSTR MSG_LOCKSCREEN_UNLOCK = _UxGT("potiahnite pre odomknutie."); + LSTR MSG_PLEASE_WAIT_REBOOT = _UxGT("Prosím čakajte do reštartu."); + #if LCD_WIDTH >= 20 || HAS_DWIN_E3V2 LSTR MSG_MEDIA_NOT_INSERTED = _UxGT("Nie je vložená karta."); - LSTR MSG_REMAINING_TIME = _UxGT("Zostávajúci čas"); - LSTR MSG_PLEASE_WAIT_REBOOT = _UxGT("Prosím čakajte do reštartu. "); LSTR MSG_PLEASE_PREHEAT = _UxGT("Prosím zahrejte hotend."); LSTR MSG_INFO_PRINT_COUNT_RESET = _UxGT("Vynulovať počítadlo"); LSTR MSG_INFO_PRINT_COUNT = _UxGT("Počet tlačí"); LSTR MSG_INFO_PRINT_TIME = _UxGT("Celkový čas"); LSTR MSG_INFO_PRINT_LONGEST = _UxGT("Najdlhšia tlač"); LSTR MSG_INFO_PRINT_FILAMENT = _UxGT("Celkom vytlačené"); - LSTR MSG_COLORS_GET = _UxGT("Zvoliť farbu"); - LSTR MSG_COLORS_SELECT = _UxGT("Zvoliť farby"); - LSTR MSG_COLORS_APPLIED = _UxGT("Farby aplikované"); - LSTR MSG_COLORS_RED = _UxGT("Červená"); - LSTR MSG_COLORS_GREEN = _UxGT("Zelená"); - LSTR MSG_COLORS_BLUE = _UxGT("Modrá"); - LSTR MSG_UI_LANGUAGE = _UxGT("Jazyk rozhrania"); - LSTR MSG_SOUND_ENABLE = _UxGT("Povoliť zvuky"); - LSTR MSG_LOCKSCREEN = _UxGT("Uzamknúť obrazovku"); #else LSTR MSG_MEDIA_NOT_INSERTED = _UxGT("Žiadna karta"); LSTR MSG_PLEASE_PREHEAT = _UxGT("Prosím zahrejte"); LSTR MSG_INFO_PRINT_COUNT = _UxGT("Tlače"); - LSTR MSG_REMAINING_TIME = _UxGT("Zostávajúci"); LSTR MSG_INFO_PRINT_TIME = _UxGT("Čas"); LSTR MSG_INFO_PRINT_LONGEST = _UxGT("Najdlhšia"); LSTR MSG_INFO_PRINT_FILAMENT = _UxGT("Vytlačené"); @@ -610,10 +670,14 @@ namespace Language_sk { LSTR MSG_FILAMENT_CHANGE_OPTION_HEADER = _UxGT("MOŽNOSTI POKRAČ.:"); LSTR MSG_FILAMENT_CHANGE_OPTION_PURGE = _UxGT("Vytlačiť viacej"); LSTR MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("Obnoviť tlač"); + LSTR MSG_FILAMENT_CHANGE_PURGE_CONTINUE = _UxGT("Vytlač. alebo pokrač.?"); LSTR MSG_FILAMENT_CHANGE_NOZZLE = _UxGT(" Tryska: "); LSTR MSG_RUNOUT_SENSOR = _UxGT("Senzor filamentu"); LSTR MSG_RUNOUT_DISTANCE_MM = _UxGT("Vzd. mm fil. senz."); LSTR MSG_RUNOUT_ENABLE = _UxGT("Zapnúť senzor"); + LSTR MSG_RUNOUT_ACTIVE = _UxGT("Senz. fil. zapn."); + LSTR MSG_INVERT_EXTRUDER = _UxGT("Invert. extrudér"); + LSTR MSG_EXTRUDER_MIN_TEMP = _UxGT("Min. tepl. extrud."); LSTR MSG_FANCHECK = _UxGT("Kontrola rýchl."); LSTR MSG_KILL_HOMING_FAILED = _UxGT("Parkovanie zlyhalo"); LSTR MSG_LCD_PROBING_FAILED = _UxGT("Kalibrácia zlyhala");