bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

🎨 Fix spelling, whitespace

Browse Source
This commit is contained in:
Scott Lahteine
2022-05-31 12:43:44 -05:00
parent 1d8d8dccf4
commit f3b593ae73
18 changed files with 28 additions and 28 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
Marlin/src/lcd/extui/anycubic_chiron/chiron_tft.cpp
View File

@ -708,7 +708,7 @@ void ChironTFT::PanelAction(uint8_t req) {
// Old TFT A22 X -1F1500 A22 X +1F1500
// New TFT A22 X-1.0 F1500 A22 X1.0 F1500
// lets just wrap this in a gcode relative nonprint move and let the controller deal with it
// Send a G-code-relative non-print move and let the controller deal with it
// G91 G0 <panel command> G90
if (!isPrinting()) { // Ignore request if printing

2
Marlin/src/lcd/extui/dgus/DGUSDisplay.cpp
View File

@ -243,7 +243,7 @@ void DGUSDisplay::WritePGM(const char str[], uint8_t len) {
}
void DGUSDisplay::loop() {
// protect against recursion… ProcessRx() may indirectly call idle() when injecting gcode commands.
// Protect against recursion. ProcessRx() may indirectly call idle() when injecting G-code commands.
if (!no_reentrance) {
no_reentrance = true;
ProcessRx();

2
Marlin/src/lcd/extui/malyan/malyan.cpp
View File

@ -24,7 +24,7 @@
* lcd/extui/malyan/malyan.cpp
*
* LCD implementation for Malyan's LCD, a separate ESP8266 MCU running
* on Serial1 for the M200 board. This module outputs a pseudo-gcode
* on Serial1 for the M200 board. This module outputs a pseudo-G-code
* wrapped in curly braces which the LCD implementation translates into
* actual G-code commands.
*

6
Marlin/src/lcd/extui/mks_ui/draw_print_file.cpp
View File

@ -369,7 +369,7 @@ uint32_t lv_open_gcode_file(char *path) {
card.openFileRead(cur_name);
card.read(public_buf, 512);
ps4 = (uint32_t *)strstr((char *)public_buf, ";simage:");
// Ignore the beginning message of gcode file
// Ignore the beginning message of G-code file
if (ps4) {
pre_sread_cnt = (uintptr_t)ps4 - (uintptr_t)((uint32_t *)(&public_buf[0]));
card.setIndex(pre_sread_cnt);
@ -490,7 +490,7 @@ void cutFileName(char *path, int len, int bytePerLine, char *outStr) {
//&& (strIndex2 != 0) && (strIndex1 < strIndex2)
) ? strIndex1 + 1 : tmpFile;
if (strIndex2 == 0 || (strIndex1 > strIndex2)) { // not gcode file
if (strIndex2 == 0 || (strIndex1 > strIndex2)) { // not G-code file
#if _LFN_UNICODE
if (wcslen(beginIndex) > len)
wcsncpy(outStr, beginIndex, len);
@ -503,7 +503,7 @@ void cutFileName(char *path, int len, int bytePerLine, char *outStr) {
strcpy(outStr, beginIndex);
#endif
}
else { // gcode file
else { // G-code file
if (strIndex2 - beginIndex > (len - 2)) {
#if _LFN_UNICODE
wcsncpy(outStr, (const WCHAR *)beginIndex, len - 3);

6
Marlin/src/lcd/extui/mks_ui/draw_ui.cpp
View File

@ -159,7 +159,7 @@ void gCfgItems_init() {
gCfgItems.spi_flash_flag = FLASH_INF_VALID_FLAG;
W25QXX.SPI_FLASH_SectorErase(VAR_INF_ADDR);
W25QXX.SPI_FLASH_BufferWrite((uint8_t *)&gCfgItems, VAR_INF_ADDR, sizeof(gCfgItems));
// init gcode command
// Init G-code command
W25QXX.SPI_FLASH_BufferWrite((uint8_t *)&custom_gcode_command[0], AUTO_LEVELING_COMMAND_ADDR, 100);
W25QXX.SPI_FLASH_BufferWrite((uint8_t *)&custom_gcode_command[1], OTHERS_COMMAND_ADDR_1, 100);
W25QXX.SPI_FLASH_BufferWrite((uint8_t *)&custom_gcode_command[2], OTHERS_COMMAND_ADDR_2, 100);
@ -238,7 +238,7 @@ void update_spi_flash() {
uint8_t command_buf[512];
W25QXX.init(SPI_QUARTER_SPEED);
// read back the gcode command before erase spi flash
// read back the G-code command before erase spi flash
W25QXX.SPI_FLASH_BufferRead((uint8_t *)&command_buf, GCODE_COMMAND_ADDR, sizeof(command_buf));
W25QXX.SPI_FLASH_SectorErase(VAR_INF_ADDR);
W25QXX.SPI_FLASH_BufferWrite((uint8_t *)&gCfgItems, VAR_INF_ADDR, sizeof(gCfgItems));
@ -249,7 +249,7 @@ void update_gcode_command(int addr, uint8_t *s) {
uint8_t command_buf[512];
W25QXX.init(SPI_QUARTER_SPEED);
// read back the gcode command before erase spi flash
// read back the G-code command before erase spi flash
W25QXX.SPI_FLASH_BufferRead((uint8_t *)&command_buf, GCODE_COMMAND_ADDR, sizeof(command_buf));
W25QXX.SPI_FLASH_SectorErase(VAR_INF_ADDR);
W25QXX.SPI_FLASH_BufferWrite((uint8_t *)&gCfgItems, VAR_INF_ADDR, sizeof(gCfgItems));

2
Marlin/src/lcd/extui/mks_ui/pic_manager.h
View File

@ -122,7 +122,7 @@
#define VAR_INF_ADDR 0x000000
#define FLASH_INF_VALID_FLAG 0x20201118
// Store some gcode commands, such as auto leveling commands
// Store some G-code commands, such as auto-leveling commands
#define GCODE_COMMAND_ADDR VAR_INF_ADDR + 3 * 1024
#define AUTO_LEVELING_COMMAND_ADDR GCODE_COMMAND_ADDR
#define OTHERS_COMMAND_ADDR_1 AUTO_LEVELING_COMMAND_ADDR + 100