🔧 Thermistor (66) sanity-check (#24803)

This commit is contained in:
Keith Bennett 2022-10-01 09:19:51 -07:00 committed by Scott Lahteine
parent a58f27763f
commit f17a07df99
9 changed files with 43 additions and 10 deletions

View File

@ -496,7 +496,7 @@
* 30 : 100 Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950 * 30 : 100 Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K - beta 3950
* 60 : 100 Maker's Tool Works Kapton Bed Thermistor - beta 3950 * 60 : 100 Maker's Tool Works Kapton Bed Thermistor - beta 3950
* 61 : 100 Formbot/Vivedino 350°C Thermistor - beta 3950 * 61 : 100 Formbot/Vivedino 350°C Thermistor - beta 3950
* 66 : 4.7 Dyze Design High Temperature Thermistor * 66 : 4.7 Dyze Design / Trianglelab T-D500 500°C High Temperature Thermistor
* 67 : 500 SliceEngineering 450°C Thermistor * 67 : 500 SliceEngineering 450°C Thermistor
* 68 : PT100 amplifier board from Dyze Design * 68 : PT100 amplifier board from Dyze Design
* 70 : 100 bq Hephestos 2 * 70 : 100 bq Hephestos 2

View File

@ -738,6 +738,7 @@
#define MAPLIST(OP,V...) EVAL(_MAPLIST(OP,V)) #define MAPLIST(OP,V...) EVAL(_MAPLIST(OP,V))
// Temperature Sensor Config // Temperature Sensor Config
#define _HAS_E_TEMP(N) || (TEMP_SENSOR_##N != 0) #define TEMP_SENSOR(N) TEMP_SENSOR_##N
#define _HAS_E_TEMP(N) || TEMP_SENSOR(N)
#define HAS_E_TEMP_SENSOR (0 REPEAT(EXTRUDERS, _HAS_E_TEMP)) #define HAS_E_TEMP_SENSOR (0 REPEAT(EXTRUDERS, _HAS_E_TEMP))
#define TEMP_SENSOR_IS_MAX_TC(T) (TEMP_SENSOR_##T == -5 || TEMP_SENSOR_##T == -3 || TEMP_SENSOR_##T == -2) #define TEMP_SENSOR_IS_MAX_TC(T) (TEMP_SENSOR(T) == -5 || TEMP_SENSOR(T) == -3 || TEMP_SENSOR(T) == -2)

View File

@ -161,9 +161,10 @@
#define HID_E6 6 #define HID_E6 6
#define HID_E7 7 #define HID_E7 7
#define _SENSOR_IS(I,N) || (TEMP_SENSOR_##N == I) #define _SENSOR_IS(I,N) || (TEMP_SENSOR(N) == I)
#define _E_SENSOR_IS(I,N) _SENSOR_IS(N,I) #define _E_SENSOR_IS(I,N) _SENSOR_IS(N,I)
#define ANY_THERMISTOR_IS(N) (0 REPEAT2(HOTENDS, _E_SENSOR_IS, N) \ #define ANY_E_SENSOR_IS(N) (0 REPEAT2(HOTENDS, _E_SENSOR_IS, N))
#define ANY_THERMISTOR_IS(N) ( ANY_E_SENSOR_IS(N) \
_SENSOR_IS(N,BED) _SENSOR_IS(N,PROBE) _SENSOR_IS(N,CHAMBER) \ _SENSOR_IS(N,BED) _SENSOR_IS(N,PROBE) _SENSOR_IS(N,CHAMBER) \
_SENSOR_IS(N,COOLER) _SENSOR_IS(N,BOARD) _SENSOR_IS(N,REDUNDANT) ) _SENSOR_IS(N,COOLER) _SENSOR_IS(N,BOARD) _SENSOR_IS(N,REDUNDANT) )

View File

@ -2656,7 +2656,7 @@
// //
// ADC Temp Sensors (Thermistor or Thermocouple with amplifier ADC interface) // ADC Temp Sensors (Thermistor or Thermocouple with amplifier ADC interface)
// //
#define HAS_ADC_TEST(P) (PIN_EXISTS(TEMP_##P) && TEMP_SENSOR_##P != 0 && !TEMP_SENSOR_IS_MAX_TC(P) && !TEMP_SENSOR_##P##_IS_DUMMY) #define HAS_ADC_TEST(P) (TEMP_SENSOR(P) && PIN_EXISTS(TEMP_##P) && !TEMP_SENSOR_IS_MAX_TC(P) && !TEMP_SENSOR_##P##_IS_DUMMY)
#if HOTENDS > 0 && HAS_ADC_TEST(0) #if HOTENDS > 0 && HAS_ADC_TEST(0)
#define HAS_TEMP_ADC_0 1 #define HAS_TEMP_ADC_0 1
#endif #endif

View File

@ -2272,6 +2272,37 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#error "TEMP_SENSOR_REDUNDANT 1000 requires REDUNDANT_PULLUP_RESISTOR_OHMS, REDUNDANT_RESISTANCE_25C_OHMS and REDUNDANT_BETA in Configuration_adv.h." #error "TEMP_SENSOR_REDUNDANT 1000 requires REDUNDANT_PULLUP_RESISTOR_OHMS, REDUNDANT_RESISTANCE_25C_OHMS and REDUNDANT_BETA in Configuration_adv.h."
#endif #endif
/**
* Required thermistor 66 (Dyze Design / Trianglelab T-D500) settings
* https://docs.dyzedesign.com/hotends.html#_500-%C2%B0c-thermistor
*/
#if ANY_E_SENSOR_IS(66)
#define _BAD_MINTEMP(N) (TEMP_SENSOR(N) == 66 && HEATER_##N##_MINTEMP <= 20)
#if _BAD_MINTEMP(0)
#error "Thermistor 66 requires HEATER_0_MINTEMP > 20."
#elif _BAD_MINTEMP(1)
#error "Thermistor 66 requires HEATER_1_MINTEMP > 20."
#elif _BAD_MINTEMP(2)
#error "Thermistor 66 requires HEATER_2_MINTEMP > 20."
#elif _BAD_MINTEMP(3)
#error "Thermistor 66 requires HEATER_3_MINTEMP > 20."
#elif _BAD_MINTEMP(4)
#error "Thermistor 66 requires HEATER_4_MINTEMP > 20."
#elif _BAD_MINTEMP(5)
#error "Thermistor 66 requires HEATER_5_MINTEMP > 20."
#elif _BAD_MINTEMP(6)
#error "Thermistor 66 requires HEATER_6_MINTEMP > 20."
#elif _BAD_MINTEMP(7)
#error "Thermistor 66 requires HEATER_7_MINTEMP > 20."
#endif
#if MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED < 5
#error "Thermistor 66 requires MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED ≥ 5."
#elif MILLISECONDS_PREHEAT_TIME < 30000
#error "Thermistor 66 requires MILLISECONDS_PREHEAT_TIME ≥ 30000."
#endif
#undef _BAD_MINTEMP
#endif
/** /**
* Required MAX31865 settings * Required MAX31865 settings
*/ */

View File

@ -141,7 +141,7 @@
#elif THERMISTOR_ID == 61 #elif THERMISTOR_ID == 61
#define THERMISTOR_NAME "Formbot 350°C" #define THERMISTOR_NAME "Formbot 350°C"
#elif THERMISTOR_ID == 66 #elif THERMISTOR_ID == 66
#define THERMISTOR_NAME "Dyze 4.7M" #define THERMISTOR_NAME "Dyze / TL 4.7M"
#elif THERMISTOR_ID == 67 #elif THERMISTOR_ID == 67
#define THERMISTOR_NAME "SliceEng 450°C" #define THERMISTOR_NAME "SliceEng 450°C"

View File

@ -2649,7 +2649,7 @@ void Temperature::init() {
temp_range[NR].raw_max -= TEMPDIR(NR) * (OVERSAMPLENR); \ temp_range[NR].raw_max -= TEMPDIR(NR) * (OVERSAMPLENR); \
}while(0) }while(0)
#define _MINMAX_TEST(N,M) (HOTENDS > N && TEMP_SENSOR_##N > 0 && TEMP_SENSOR_##N != 998 && TEMP_SENSOR_##N != 999 && defined(HEATER_##N##_##M##TEMP)) #define _MINMAX_TEST(N,M) (HOTENDS > N && TEMP_SENSOR(N) > 0 && TEMP_SENSOR(N) != 998 && TEMP_SENSOR(N) != 999 && defined(HEATER_##N##_##M##TEMP))
#if _MINMAX_TEST(0, MIN) #if _MINMAX_TEST(0, MIN)
_TEMP_MIN_E(0); _TEMP_MIN_E(0);

View File

@ -21,7 +21,7 @@
*/ */
#pragma once #pragma once
// R25 = 2.5 MOhm, beta25 = 4500 K, 4.7 kOhm pull-up, DyzeDesign 500 °C Thermistor // R25 = 2.5 MOhm, beta25 = 4500 K, 4.7 kOhm pull-up, DyzeDesign / Trianglelab T-D500 500 °C Thermistor
constexpr temp_entry_t temptable_66[] PROGMEM = { constexpr temp_entry_t temptable_66[] PROGMEM = {
{ OV( 17.5), 850 }, { OV( 17.5), 850 },
{ OV( 17.9), 500 }, { OV( 17.9), 500 },

View File

@ -338,7 +338,7 @@ static_assert(255 > TEMPTABLE_0_LEN || 255 > TEMPTABLE_1_LEN || 255 > TEMPTABLE_
// For thermocouples the highest temperature results in the highest ADC value // For thermocouples the highest temperature results in the highest ADC value
#define _TT_REV(N) REVERSE_TEMP_SENSOR_RANGE_##N #define _TT_REV(N) REVERSE_TEMP_SENSOR_RANGE_##N
#define TT_REV(N) TERN0(TEMP_SENSOR_##N##_IS_THERMISTOR, DEFER4(_TT_REV)(TEMP_SENSOR_##N)) #define TT_REV(N) TERN0(TEMP_SENSOR_##N##_IS_THERMISTOR, DEFER4(_TT_REV)(TEMP_SENSOR(N)))
#define _TT_REVRAW(N) !TEMP_SENSOR_##N##_IS_THERMISTOR #define _TT_REVRAW(N) !TEMP_SENSOR_##N##_IS_THERMISTOR
#define TT_REVRAW(N) (TT_REV(N) || _TT_REVRAW(N)) #define TT_REVRAW(N) (TT_REV(N) || _TT_REVRAW(N))