bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Various fixups for single-nozzle filament swap (#12036)

Browse Source
This commit is contained in:
InsanityAutomation
2018-10-08 16:39:55 -04:00
committed by Scott Lahteine
parent 8dbb305e8e
commit ee253991d4
81 changed files with 417 additions and 345 deletions
Download Patch File Download Diff File Expand all files Collapse all files

9
Marlin/src/config/default/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Anet/A2/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Anet/A2plus/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Anet/A6/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Anet/A8/Configuration.h
View File

@ -157,13 +157,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/BQ/Hephestos/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
View File

@ -164,13 +164,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/BQ/WITBOX/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Cartesio/Configuration.h
View File

@ -157,13 +157,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Creality/CR-10/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Creality/CR-10S/Configuration.h
View File

@ -160,13 +160,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
View File

@ -165,13 +165,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Creality/CR-8/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Creality/Ender-2/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Creality/Ender-3/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Creality/Ender-4/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Einstart-S/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Felix/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Felix/DUAL/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Formbot/Raptor/Configuration.h
View File

@ -197,13 +197,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration.h
View File

@ -159,13 +159,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h
View File

@ -160,13 +160,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Geeetech/MeCreator2/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/JGAurora/A5/Configuration.h
View File

@ -161,13 +161,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/MakerParts/Configuration.h
View File

@ -176,13 +176,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Malyan/M150/Configuration.h
View File

@ -161,13 +161,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Malyan/M200/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Mks/Sbase/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/RigidBot/Configuration.h
View File

@ -159,13 +159,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/SCARA/Configuration.h
View File

@ -187,13 +187,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/STM32F10/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/STM32F4/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Sanguinololu/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/TheBorg/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/TinyBoy2/Configuration.h
View File

@ -178,13 +178,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Tronxy/X1/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Tronxy/X3A/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Tronxy/X5S/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Tronxy/XY100/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Velleman/K8200/Configuration.h
View File

@ -176,13 +176,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Velleman/K8400/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/adafruit/ST7565/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration.h
View File

@ -169,13 +169,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
View File

@ -161,13 +161,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/delta/generic/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/delta/kossel_mini/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/delta/kossel_pro/Configuration.h
View File

@ -160,13 +160,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/delta/kossel_xl/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
View File

@ -161,13 +161,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/makibox/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/stm32f103ret6/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/tvrrug/Round2/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif

9
Marlin/src/config/examples/wt150/Configuration.h
View File

@ -156,13 +156,14 @@
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
#if ENABLED(SINGLENOZZLE)
// Length of filament to retract and prime on toolchange
//#define SINGLENOZZLE_SWAP_LENGTH 12.0
//#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
// Parameters for filament retract / prime on toolchange
#define SINGLENOZZLE_SWAP_LENGTH 12 // (mm)
#define SINGLENOZZLE_SWAP_RETRACT_SPEED 3600 // (mm/m)
#define SINGLENOZZLE_SWAP_PRIME_SPEED 3600 // (mm/m)
//#define SINGLENOZZLE_SWAP_PARK
#if ENABLED(SINGLENOZZLE_SWAP_PARK)
#define SINGLENOZZLE_TOOLCHANGE_POSITION { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
#define SINGLENOZZLE_PARK_XY_FEEDRATE 6000 // (mm/m)
#else
#define SINGLENOZZLE_TOOLCHANGE_ZRAISE 2.0
#endif