From edea49f9a980a58191661e7eceabcf9f5df40709 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 3 Jan 2021 07:16:50 -0600 Subject: [PATCH] Creality 4.2.10 board (#20647) --- Marlin/src/core/boards.h | 15 +- Marlin/src/pins/pins.h | 2 + Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h | 208 ++++++++++++++++++ 3 files changed, 218 insertions(+), 7 deletions(-) create mode 100644 Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index 3057f12b7f..13a202daed 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -330,13 +330,14 @@ #define BOARD_CHITU3D_V6 4037 // Chitu3D TronXY X5SA V5 Board #define BOARD_CREALITY_V4 4038 // Creality v4.x (STM32F103RE) #define BOARD_CREALITY_V427 4039 // Creality v4.2.7 (STM32F103RE) -#define BOARD_CREALITY_V431 4040 // Creality v4.3.1 (STM32F103RE) -#define BOARD_CREALITY_V452 4041 // Creality v4.5.2 (STM32F103RE) -#define BOARD_CREALITY_V453 4042 // Creality v4.5.3 (STM32F103RE) -#define BOARD_TRIGORILLA_PRO 4043 // Trigorilla Pro (STM32F103ZET6) -#define BOARD_FLY_MINI 4044 // FLY MINI (STM32F103RCT6) -#define BOARD_FLSUN_HISPEED 4045 // FLSUN HiSpeedV1 (STM32F103VET6) -#define BOARD_BEAST 4046 // STM32F103RET6 Libmaple-based controller +#define BOARD_CREALITY_V4210 4040 // Creality v4.2.10 (STM32F103RE) as found in the CR-30 +#define BOARD_CREALITY_V431 4041 // Creality v4.3.1 (STM32F103RE) +#define BOARD_CREALITY_V452 4042 // Creality v4.5.2 (STM32F103RE) +#define BOARD_CREALITY_V453 4043 // Creality v4.5.3 (STM32F103RE) +#define BOARD_TRIGORILLA_PRO 4044 // Trigorilla Pro (STM32F103ZET6) +#define BOARD_FLY_MINI 4045 // FLY MINI (STM32F103RCT6) +#define BOARD_FLSUN_HISPEED 4046 // FLSUN HiSpeedV1 (STM32F103VET6) +#define BOARD_BEAST 4047 // STM32F103RET6 Libmaple-based controller // // ARM Cortex-M4F diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index 56508b9a21..c0995e8826 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -530,6 +530,8 @@ #include "stm32f1/pins_CHITU3D_V6.h" // STM32F1 env:chitu_f103 #elif MB(CREALITY_V4) #include "stm32f1/pins_CREALITY_V4.h" // STM32F1 env:STM32F103RET6_creality +#elif MB(CREALITY_V4210) + #include "stm32f1/pins_CREALITY_V4210.h" // STM32F1 env:STM32F103RET6_creality #elif MB(CREALITY_V427) #include "stm32f1/pins_CREALITY_V427.h" // STM32F1 env:STM32F103RET6_creality #elif MB(CREALITY_V431) diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h new file mode 100644 index 0000000000..025e68d4da --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h @@ -0,0 +1,208 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * CREALITY 4.2.10 (STM32F103) board pin assignments + */ + +#if NOT_TARGET(__STM32F1__) + #error "Oops! Select an STM32F1 board in 'Tools > Board.'" +#elif HOTENDS > 1 || E_STEPPERS > 1 + #error "CREALITY supports up to 1 hotends / E-steppers. Comment out this line to continue." +#endif + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "Creality V4.2.10" +#endif +#ifndef DEFAULT_MACHINE_NAME + #define DEFAULT_MACHINE_NAME "3DPrintMill" +#endif + +#define BOARD_NO_NATIVE_USB + +// +// EEPROM +// +#if NO_EEPROM_SELECTED + // FLASH + //#define FLASH_EEPROM_EMULATION + + // I2C + #define IIC_BL24CXX_EEPROM // EEPROM on I2C-0 used only for display settings + #if ENABLED(IIC_BL24CXX_EEPROM) + #define IIC_EEPROM_SDA PA11 + #define IIC_EEPROM_SCL PA12 + #define MARLIN_EEPROM_SIZE 0x800 // 2Kb (24C16) + #else + #define SDCARD_EEPROM_EMULATION // SD EEPROM until all EEPROM is BL24CXX + #define MARLIN_EEPROM_SIZE 0x800 // 2Kb + #endif + + // SPI + //#define SPI_EEPROM // EEPROM on SPI-0 + //#define SPI_CHAN_EEPROM1 ? + //#define SPI_EEPROM1_CS ? + + // 2K EEPROM + //#define SPI_EEPROM2_CS ? + + // 32Mb FLASH + //#define SPI_FLASH_CS ? +#endif + +// +// Servos +// +#define SERVO0_PIN PB0 // BLTouch OUT + +// +// Limit Switches +// +#define X_STOP_PIN PA3 +#define Y_STOP_PIN PA7 +#define Z_STOP_PIN PA5 + +#define Z_MIN_PROBE_PIN PA5 // BLTouch IN + +// +// Filament Runout Sensor +// +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN PA6 // "Pulled-high" +#endif + +// +// Steppers +// +#define X_ENABLE_PIN PC3 +#ifndef X_STEP_PIN + #define X_STEP_PIN PC2 +#endif +#ifndef X_DIR_PIN + #define X_DIR_PIN PB9 +#endif + +#define Y_ENABLE_PIN PC3 +#ifndef Y_STEP_PIN + #define Y_STEP_PIN PB8 +#endif +#ifndef Y_DIR_PIN + #define Y_DIR_PIN PB7 +#endif + +#define Z_ENABLE_PIN PC3 +#ifndef Z_STEP_PIN + #define Z_STEP_PIN PB6 +#endif +#ifndef Z_DIR_PIN + #define Z_DIR_PIN PB5 +#endif + +#define E0_ENABLE_PIN PC3 +#ifndef E0_STEP_PIN + #define E0_STEP_PIN PB4 +#endif +#ifndef E0_DIR_PIN + #define E0_DIR_PIN PB3 +#endif + +// +// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role +// +#define DISABLE_DEBUG + +// +// Temperature Sensors +// +#define TEMP_0_PIN PC5 // TH1 +#define TEMP_BED_PIN PC4 // TB1 + +// +// Heaters / Fans +// +#define HEATER_0_PIN PA0 // HEATER1 +#define HEATER_BED_PIN PA1 // HOT BED + +#define FAN_PIN PA2 // FAN +#define FAN_SOFT_PWM + +// +// SD Card +// +#define SD_DETECT_PIN PC7 +#define SDCARD_CONNECTION ONBOARD +#define ONBOARD_SPI_DEVICE 1 +#define ONBOARD_SD_CS_PIN PA4 // SDSS +#define SDIO_SUPPORT +#define NO_SD_HOST_DRIVE // This board's SD is only seen by the printer + +#if ENABLED(CR10_STOCKDISPLAY) && NONE(RET6_12864_LCD, VET6_12864_LCD) + #error "Define RET6_12864_LCD or VET6_12864_LCD to select pins for CR10_STOCKDISPLAY with the Creality V4 controller." +#endif + +#if ENABLED(RET6_12864_LCD) + + // RET6 12864 LCD + #define LCD_PINS_RS PB12 + #define LCD_PINS_ENABLE PB15 + #define LCD_PINS_D4 PB13 + + #define BTN_ENC PB2 + #define BTN_EN1 PB10 + #define BTN_EN2 PB14 + + #define BEEPER_PIN PC6 + +#elif ENABLED(VET6_12864_LCD) + + // VET6 12864 LCD + #define LCD_PINS_RS PA4 + #define LCD_PINS_ENABLE PA7 + #define LCD_PINS_D4 PA5 + + #define BTN_ENC PC5 + #define BTN_EN1 PB10 + #define BTN_EN2 PA6 + +#elif ENABLED(DWIN_CREALITY_LCD) + + // RET6 DWIN ENCODER LCD + #define BTN_ENC PB14 + #define BTN_EN1 PB15 + #define BTN_EN2 PB12 + + //#define LCD_LED_PIN PB2 + #ifndef BEEPER_PIN + #define BEEPER_PIN PB13 + #undef SPEAKER + #endif + +#elif ENABLED(DWIN_VET6_CREALITY_LCD) + + // VET6 DWIN ENCODER LCD + #define BTN_ENC PA6 + #define BTN_EN1 PA7 + #define BTN_EN2 PA4 + + #define BEEPER_PIN PA5 + +#endif