bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

🩹 Fix some parameters w/out values (#24051)

Browse Source
This commit is contained in:
DerAndere 2022-04-18 06:03:39 +02:00 committed by Scott Lahteine
parent 85599abba7
commit ecfe7b6400
16 changed files with 35 additions and 62 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Marlin/src/gcode/calibrate/M666.cpp
View File

@ -45,7 +45,7 @@
DEBUG_SECTION(log_M666, "M666", DEBUGGING(LEVELING));
bool is_err = false, is_set = false;
LOOP_NUM_AXES(i) {
if (parser.seen(AXIS_CHAR(i))) {
if (parser.seenval(AXIS_CHAR(i))) {
is_set = true;
const float v = parser.value_linear_units();
if (v > 0)

4
Marlin/src/gcode/config/M281.cpp
View File

@ -47,8 +47,8 @@ void GcodeSuite::M281() {
return;
}
#endif
if (parser.seen('L')) servo_angles[servo_index][0] = parser.value_int();
if (parser.seen('U')) servo_angles[servo_index][1] = parser.value_int();
if (parser.seenval('L')) servo_angles[servo_index][0] = parser.value_int();
if (parser.seenval('U')) servo_angles[servo_index][1] = parser.value_int();
}
else
SERIAL_ERROR_MSG("Servo ", servo_index, " out of range");

6
Marlin/src/gcode/config/M304.cpp
View File

@ -36,9 +36,9 @@
*/
void GcodeSuite::M304() {
if (!parser.seen("PID")) return M304_report();
if (parser.seen('P')) thermalManager.temp_bed.pid.Kp = parser.value_float();
if (parser.seen('I')) thermalManager.temp_bed.pid.Ki = scalePID_i(parser.value_float());
if (parser.seen('D')) thermalManager.temp_bed.pid.Kd = scalePID_d(parser.value_float());
if (parser.seenval('P')) thermalManager.temp_bed.pid.Kp = parser.value_float();
if (parser.seenval('I')) thermalManager.temp_bed.pid.Ki = scalePID_i(parser.value_float());
if (parser.seenval('D')) thermalManager.temp_bed.pid.Kd = scalePID_d(parser.value_float());
}
void GcodeSuite::M304_report(const bool forReplay/*=true*/) {

8
Marlin/src/gcode/config/M305.cpp
View File

@ -52,19 +52,19 @@ void GcodeSuite::M305() {
if (t_index >= (USER_THERMISTORS) || (do_set && t_index < 0))
SERIAL_ECHO_MSG("!Invalid index. (0 <= P <= ", USER_THERMISTORS - 1, ")");
else if (do_set) {
if (parser.seen('R')) // Pullup resistor value
if (parser.seenval('R')) // Pullup resistor value
if (!thermalManager.set_pull_up_res(t_index, parser.value_float()))
SERIAL_ECHO_MSG("!Invalid series resistance. (0 < R < 1000000)");
if (parser.seen('T')) // Resistance at 25C
if (parser.seenval('T')) // Resistance at 25C
if (!thermalManager.set_res25(t_index, parser.value_float()))
SERIAL_ECHO_MSG("!Invalid 25C resistance. (0 < T < 10000000)");
if (parser.seen('B')) // Beta value
if (parser.seenval('B')) // Beta value
if (!thermalManager.set_beta(t_index, parser.value_float()))
SERIAL_ECHO_MSG("!Invalid beta. (0 < B < 1000000)");
if (parser.seen('C')) // Steinhart-Hart C coefficient
if (parser.seenval('C')) // Steinhart-Hart C coefficient
if (!thermalManager.set_sh_coeff(t_index, parser.value_float()))
SERIAL_ECHO_MSG("!Invalid Steinhart-Hart C coeff. (-0.01 < C < +0.01)");
} // If not setting then report parameters

26
Marlin/src/gcode/control/M17_M18_M84.cpp
View File

@ -128,17 +128,8 @@ void GcodeSuite::M17() {
stepper.enable_e_steppers();
}
#endif
NUM_AXIS_CODE(
if (parser.seen_test('X')) stepper.enable_axis(X_AXIS),
if (parser.seen_test('Y')) stepper.enable_axis(Y_AXIS),
if (parser.seen_test('Z')) stepper.enable_axis(Z_AXIS),
if (parser.seen_test(AXIS4_NAME)) stepper.enable_axis(I_AXIS),
if (parser.seen_test(AXIS5_NAME)) stepper.enable_axis(J_AXIS),
if (parser.seen_test(AXIS6_NAME)) stepper.enable_axis(K_AXIS),
if (parser.seen_test(AXIS7_NAME)) stepper.enable_axis(U_AXIS),
if (parser.seen_test(AXIS8_NAME)) stepper.enable_axis(V_AXIS),
if (parser.seen_test(AXIS9_NAME)) stepper.enable_axis(W_AXIS)
);
LOOP_NUM_AXES(a)
if (parser.seen_test(AXIS_CHAR(a))) stepper.enable_axis((AxisEnum)a);
}
}
else {
@ -244,17 +235,8 @@ void GcodeSuite::M18_M84() {
stepper.disable_e_steppers();
}
#endif
NUM_AXIS_CODE(
if (parser.seen_test('X')) stepper.disable_axis(X_AXIS),
if (parser.seen_test('Y')) stepper.disable_axis(Y_AXIS),
if (parser.seen_test('Z')) stepper.disable_axis(Z_AXIS),
if (parser.seen_test(AXIS4_NAME)) stepper.disable_axis(I_AXIS),
if (parser.seen_test(AXIS5_NAME)) stepper.disable_axis(J_AXIS),
if (parser.seen_test(AXIS6_NAME)) stepper.disable_axis(K_AXIS),
if (parser.seen_test(AXIS7_NAME)) stepper.disable_axis(U_AXIS),
if (parser.seen_test(AXIS8_NAME)) stepper.disable_axis(V_AXIS),
if (parser.seen_test(AXIS9_NAME)) stepper.disable_axis(W_AXIS)
);
LOOP_NUM_AXES(a)
if (parser.seen_test(AXIS_CHAR(a))) stepper.disable_axis((AxisEnum)a);
}
}
else

2
Marlin/src/gcode/control/M280.cpp
View File

@ -48,7 +48,7 @@ void GcodeSuite::M280() {
const int anew = parser.value_int();
if (anew >= 0) {
#if ENABLED(POLARGRAPH)
if (parser.seen('T')) { // (ms) Total duration of servo move
if (parser.seenval('T')) { // (ms) Total duration of servo move
const int16_t t = constrain(parser.value_int(), 0, 10000);
const int aold = servo[servo_index].read();
millis_t now = millis();

2
Marlin/src/gcode/control/M3-M5.cpp
View File

@ -93,7 +93,7 @@ void GcodeSuite::M3_M4(const bool is_M4) {
// Laser power in inline mode
cutter.inline_direction(is_M4); // Should always be unused
#if ENABLED(SPINDLE_LASER_USE_PWM)
if (parser.seen('O')) {
if (parser.seenval('O')) {
cutter.unitPower = cutter.power_to_range(parser.value_byte(), 0);
cutter.inline_ocr_power(cutter.unitPower); // The OCR is a value from 0 to 255 (uint8_t)
}

2
Marlin/src/gcode/control/M350_M351.cpp
View File

@ -41,7 +41,7 @@
*/
void GcodeSuite::M350() {
if (parser.seen('S')) LOOP_DISTINCT_AXES(i) stepper.microstep_mode(i, parser.value_byte());
LOOP_LOGICAL_AXES(i) if (parser.seen(AXIS_CHAR(i))) stepper.microstep_mode(i, parser.value_byte());
LOOP_LOGICAL_AXES(i) if (parser.seenval(AXIS_CHAR(i))) stepper.microstep_mode(i, parser.value_byte());
TERN_(HAS_M350_B_PARAM, if (parser.seenval('B')) stepper.microstep_mode(E_AXIS + 1, parser.value_byte()));
stepper.microstep_readings();
}

6
Marlin/src/gcode/control/M605.cpp
View File

@ -64,7 +64,7 @@
void GcodeSuite::M605() {
planner.synchronize();
if (parser.seen('S')) {
if (parser.seenval('S')) {
const DualXMode previous_mode = dual_x_carriage_mode;
dual_x_carriage_mode = (DualXMode)parser.value_byte();
@ -78,8 +78,8 @@
case DXC_DUPLICATION_MODE:
// Set the X offset, but no less than the safety gap
if (parser.seen('X')) duplicate_extruder_x_offset = _MAX(parser.value_linear_units(), (X2_MIN_POS) - (X1_MIN_POS));
if (parser.seen('R')) duplicate_extruder_temp_offset = parser.value_celsius_diff();
if (parser.seenval('X')) duplicate_extruder_x_offset = _MAX(parser.value_linear_units(), (X2_MIN_POS) - (X1_MIN_POS));
if (parser.seenval('R')) duplicate_extruder_temp_offset = parser.value_celsius_diff();
// Always switch back to tool 0
if (active_extruder != 0) tool_change(0);
break;

6
Marlin/src/gcode/feature/cancel/M486.cpp
View File

@ -44,14 +44,14 @@ void GcodeSuite::M486() {
cancelable.object_count = parser.intval('T', 1);
}
if (parser.seen('S'))
if (parser.seenval('S'))
cancelable.set_active_object(parser.value_int());
if (parser.seen('C')) cancelable.cancel_active_object();
if (parser.seen('P')) cancelable.cancel_object(parser.value_int());
if (parser.seenval('P')) cancelable.cancel_object(parser.value_int());
if (parser.seen('U')) cancelable.uncancel_object(parser.value_int());
if (parser.seenval('U')) cancelable.uncancel_object(parser.value_int());
}
#endif // CANCEL_OBJECTS

6
Marlin/src/gcode/feature/i2c/M260_M261.cpp
View File

@ -45,10 +45,10 @@
*/
void GcodeSuite::M260() {
// Set the target address
if (parser.seen('A')) i2c.address(parser.value_byte());
if (parser.seenval('A')) i2c.address(parser.value_byte());
// Add a new byte to the buffer
if (parser.seen('B')) i2c.addbyte(parser.value_byte());
if (parser.seenval('B')) i2c.addbyte(parser.value_byte());
// Flush the buffer to the bus
if (parser.seen('S')) i2c.send();
@ -63,7 +63,7 @@ void GcodeSuite::M260() {
* Usage: M261 A<slave device address base 10> B<number of bytes> S<style>
*/
void GcodeSuite::M261() {
if (parser.seen('A')) i2c.address(parser.value_byte());
if (parser.seenval('A')) i2c.address(parser.value_byte());
const uint8_t bytes = parser.byteval('B', 1), // Bytes to request
style = parser.byteval('S'); // Serial output style (ASCII, HEX etc)

2
Marlin/src/gcode/feature/pause/G61.cpp
View File

@ -71,7 +71,7 @@ void GcodeSuite::G61() {
if (parser.seen(NUM_AXIS_GANG("X", "Y", "Z", STR_I, STR_J, STR_K, STR_U, STR_V, STR_W))) {
DEBUG_ECHOPGM(STR_RESTORING_POS " S", slot);
LOOP_NUM_AXES(i) {
destination[i] = parser.seen(AXIS_CHAR(i))
destination[i] = parser.seenval(AXIS_CHAR(i))
? stored_position[slot][i] + parser.value_axis_units((AxisEnum)i)
: current_position[i];
DEBUG_CHAR(' ', AXIS_CHAR(i));

4
Marlin/src/gcode/feature/pause/M603.cpp
View File

@ -48,7 +48,7 @@ void GcodeSuite::M603() {
if (target_extruder < 0) return;
// Unload length
if (parser.seen('U')) {
if (parser.seenval('U')) {
fc_settings[target_extruder].unload_length = ABS(parser.value_axis_units(E_AXIS));
#if ENABLED(PREVENT_LENGTHY_EXTRUDE)
NOMORE(fc_settings[target_extruder].unload_length, EXTRUDE_MAXLENGTH);
@ -56,7 +56,7 @@ void GcodeSuite::M603() {
}
// Load length
if (parser.seen('L')) {
if (parser.seenval('L')) {
fc_settings[target_extruder].load_length = ABS(parser.value_axis_units(E_AXIS));
#if ENABLED(PREVENT_LENGTHY_EXTRUDE)
NOMORE(fc_settings[target_extruder].load_length, EXTRUDE_MAXLENGTH);

2
Marlin/src/gcode/feature/pause/M701_M702.cpp
View File

@ -106,7 +106,7 @@ void GcodeSuite::M701() {
#else
constexpr float purge_length = ADVANCED_PAUSE_PURGE_LENGTH,
slow_load_length = FILAMENT_CHANGE_SLOW_LOAD_LENGTH;
const float fast_load_length = ABS(parser.seen('L') ? parser.value_axis_units(E_AXIS)
const float fast_load_length = ABS(parser.seenval('L') ? parser.value_axis_units(E_AXIS)
: fc_settings[active_extruder].load_length);
load_filament(
slow_load_length, fast_load_length, purge_length,

2
Marlin/src/gcode/feature/runout/M412.cpp
View File

@ -48,7 +48,7 @@ void GcodeSuite::M412() {
if (seenR || seenS) runout.reset();
if (seenS) runout.enabled = parser.value_bool();
#if HAS_FILAMENT_RUNOUT_DISTANCE
if (parser.seen('D')) runout.set_runout_distance(parser.value_linear_units());
if (parser.seenval('D')) runout.set_runout_distance(parser.value_linear_units());
#endif
}
else {

17
Marlin/src/gcode/geometry/M206_M428.cpp
View File

@ -39,20 +39,11 @@
*/
void GcodeSuite::M206() {
if (!parser.seen_any()) return M206_report();
NUM_AXIS_CODE(
if (parser.seen('X')) set_home_offset(X_AXIS, parser.value_linear_units()),
if (parser.seen('Y')) set_home_offset(Y_AXIS, parser.value_linear_units()),
if (parser.seen('Z')) set_home_offset(Z_AXIS, parser.value_linear_units()),
if (parser.seen(AXIS4_NAME)) set_home_offset(I_AXIS, parser.TERN(AXIS4_ROTATES, value_float, value_linear_units)()),
if (parser.seen(AXIS5_NAME)) set_home_offset(J_AXIS, parser.TERN(AXIS5_ROTATES, value_float, value_linear_units)()),
if (parser.seen(AXIS6_NAME)) set_home_offset(K_AXIS, parser.TERN(AXIS6_ROTATES, value_float, value_linear_units)()),
if (parser.seen(AXIS7_NAME)) set_home_offset(U_AXIS, parser.TERN(AXIS7_ROTATES, value_float, value_linear_units)()),
if (parser.seen(AXIS8_NAME)) set_home_offset(V_AXIS, parser.TERN(AXIS8_ROTATES, value_float, value_linear_units)()),
if (parser.seen(AXIS9_NAME)) set_home_offset(W_AXIS, parser.TERN(AXIS9_ROTATES, value_float, value_linear_units)())
);
LOOP_NUM_AXES(a)
if (parser.seenval(AXIS_CHAR(a))) set_home_offset((AxisEnum)a, parser.value_axis_units((AxisEnum)a));
#if ENABLED(MORGAN_SCARA)
if (parser.seen('T')) set_home_offset(A_AXIS, parser.value_float()); // Theta
if (parser.seen('P')) set_home_offset(B_AXIS, parser.value_float()); // Psi
if (parser.seenval('T')) set_home_offset(A_AXIS, parser.value_float()); // Theta
if (parser.seenval('P')) set_home_offset(B_AXIS, parser.value_float()); // Psi
#endif
report_current_position();