bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

🎨 Update MKSPWC, some other pins (#22557)

Browse Source
This commit is contained in:
Scott Lahteine 2021-08-13 16:32:25 -05:00 committed by Scott Lahteine
parent e62486a610
commit eb0d80cb19
41 changed files with 279 additions and 321 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
Marlin/Configuration.h
View File

@ -367,6 +367,7 @@
//#define PSU_NAME "Power Supply"
#if ENABLED(PSU_CONTROL)
//#define MKS_PWC // Using the MKS PWC add-on
//#define PS_OFF_CONFIRM // Confirm dialog when power off
//#define PS_OFF_SOUND // Beep 1s when power off
#define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box

16
Marlin/src/HAL/DUE/HAL_SPI.cpp
View File

@ -594,18 +594,14 @@
SPI_Configure(SPI0, ID_SPI0, SPI_MR_MSTR | SPI_MR_MODFDIS | SPI_MR_PS);
SPI_Enable(SPI0);
SET_OUTPUT(DAC0_SYNC);
SET_OUTPUT(DAC0_SYNC_PIN);
#if HAS_MULTI_EXTRUDER
SET_OUTPUT(DAC1_SYNC);
WRITE(DAC1_SYNC, HIGH);
OUT_WRITE(DAC1_SYNC_PIN, HIGH);
#endif
SET_OUTPUT(SPI_EEPROM1_CS);
SET_OUTPUT(SPI_EEPROM2_CS);
SET_OUTPUT(SPI_FLASH_CS);
WRITE(DAC0_SYNC, HIGH);
WRITE(SPI_EEPROM1_CS, HIGH);
WRITE(SPI_EEPROM2_CS, HIGH);
WRITE(SPI_FLASH_CS, HIGH);
WRITE(DAC0_SYNC_PIN, HIGH);
OUT_WRITE(SPI_EEPROM1_CS_PIN, HIGH);
OUT_WRITE(SPI_EEPROM2_CS_PIN, HIGH);
OUT_WRITE(SPI_FLASH_CS_PIN, HIGH);
WRITE(SD_SS_PIN, HIGH);
OUT_WRITE(SDSS, LOW);

2
Marlin/src/HAL/STM32F1/eeprom_wired.cpp
View File

@ -44,7 +44,7 @@ bool PersistentStore::access_start() {
SET_OUTPUT(BOARD_SPI1_SCK_PIN);
SET_OUTPUT(BOARD_SPI1_MOSI_PIN);
SET_INPUT(BOARD_SPI1_MISO_PIN);
SET_OUTPUT(SPI_EEPROM1_CS);
SET_OUTPUT(SPI_EEPROM1_CS_PIN);
#endif
spiInit(0);
#endif

12
Marlin/src/HAL/shared/eeprom_if_spi.cpp
View File

@ -49,8 +49,8 @@ static void _eeprom_begin(uint8_t * const pos, const uint8_t cmd) {
(unsigned(pos) >> 8) & 0xFF, // Address High
unsigned(pos) & 0xFF // Address Low
};
WRITE(SPI_EEPROM1_CS, HIGH); // Usually free already
WRITE(SPI_EEPROM1_CS, LOW); // Activate the Bus
WRITE(SPI_EEPROM1_CS_PIN, HIGH); // Usually free already
WRITE(SPI_EEPROM1_CS_PIN, LOW); // Activate the Bus
spiSend(SPI_CHAN_EEPROM1, eeprom_temp, 3);
// Leave the Bus in-use
}
@ -60,23 +60,23 @@ uint8_t eeprom_read_byte(uint8_t *pos) {
const uint8_t v = spiRec(SPI_CHAN_EEPROM1); // After READ a value sits on the Bus
WRITE(SPI_EEPROM1_CS, HIGH); // Done with device
WRITE(SPI_EEPROM1_CS_PIN, HIGH); // Done with device
return v;
}
void eeprom_write_byte(uint8_t *pos, uint8_t value) {
const uint8_t eeprom_temp = CMD_WREN;
WRITE(SPI_EEPROM1_CS, LOW);
WRITE(SPI_EEPROM1_CS_PIN, LOW);
spiSend(SPI_CHAN_EEPROM1, &eeprom_temp, 1); // Write Enable
WRITE(SPI_EEPROM1_CS, HIGH); // Done with the Bus
WRITE(SPI_EEPROM1_CS_PIN, HIGH); // Done with the Bus
delay(1); // For a small amount of time
_eeprom_begin(pos, CMD_WRITE); // Set write address and begin transmission
spiSend(SPI_CHAN_EEPROM1, value); // Send the value to be written
WRITE(SPI_EEPROM1_CS, HIGH); // Done with the Bus
WRITE(SPI_EEPROM1_CS_PIN, HIGH); // Done with the Bus
delay(EEPROM_WRITE_DELAY); // Give page write time to complete
}

2
Marlin/src/MarlinCore.cpp
View File

@ -1192,7 +1192,7 @@ void setup() {
#if HAS_SUICIDE
SETUP_LOG("SUICIDE_PIN");
OUT_WRITE(SUICIDE_PIN, !SUICIDE_PIN_INVERTING);
OUT_WRITE(SUICIDE_PIN, !SUICIDE_PIN_STATE);
#endif
#ifdef JTAGSWD_RESET

2
Marlin/src/MarlinCore.h
View File

@ -84,7 +84,7 @@ extern bool wait_for_heatup;
bool pin_is_protected(const pin_t pin);
#if HAS_SUICIDE
inline void suicide() { OUT_WRITE(SUICIDE_PIN, SUICIDE_PIN_INVERTING); }
inline void suicide() { OUT_WRITE(SUICIDE_PIN, SUICIDE_PIN_STATE); }
#endif
#if HAS_KILL

42
Marlin/src/feature/dac/dac_dac084s085.cpp
View File

@ -20,35 +20,35 @@ void dac084s085::begin() {
uint8_t externalDac_buf[] = { 0x20, 0x00 }; // all off
// All SPI chip-select HIGH
SET_OUTPUT(DAC0_SYNC);
SET_OUTPUT(DAC0_SYNC_PIN);
#if HAS_MULTI_EXTRUDER
SET_OUTPUT(DAC1_SYNC);
SET_OUTPUT(DAC1_SYNC_PIN);
#endif
cshigh();
spiBegin();
//init onboard DAC
DELAY_US(2);
WRITE(DAC0_SYNC, LOW);
WRITE(DAC0_SYNC_PIN, LOW);
DELAY_US(2);
WRITE(DAC0_SYNC, HIGH);
WRITE(DAC0_SYNC_PIN, HIGH);
DELAY_US(2);
WRITE(DAC0_SYNC, LOW);
WRITE(DAC0_SYNC_PIN, LOW);
spiSend(SPI_CHAN_DAC, externalDac_buf, COUNT(externalDac_buf));
WRITE(DAC0_SYNC, HIGH);
WRITE(DAC0_SYNC_PIN, HIGH);
#if HAS_MULTI_EXTRUDER
//init Piggy DAC
DELAY_US(2);
WRITE(DAC1_SYNC, LOW);
WRITE(DAC1_SYNC_PIN, LOW);
DELAY_US(2);
WRITE(DAC1_SYNC, HIGH);
WRITE(DAC1_SYNC_PIN, HIGH);
DELAY_US(2);
WRITE(DAC1_SYNC, LOW);
WRITE(DAC1_SYNC_PIN, LOW);
spiSend(SPI_CHAN_DAC, externalDac_buf, COUNT(externalDac_buf));
WRITE(DAC1_SYNC, HIGH);
WRITE(DAC1_SYNC_PIN, HIGH);
#endif
return;
@ -66,18 +66,18 @@ void dac084s085::setValue(const uint8_t channel, const uint8_t value) {
cshigh();
if (channel > 3) { // DAC Piggy E1,E2,E3
WRITE(DAC1_SYNC, LOW);
WRITE(DAC1_SYNC_PIN, LOW);
DELAY_US(2);
WRITE(DAC1_SYNC, HIGH);
WRITE(DAC1_SYNC_PIN, HIGH);
DELAY_US(2);
WRITE(DAC1_SYNC, LOW);
WRITE(DAC1_SYNC_PIN, LOW);
}
else { // DAC onboard X,Y,Z,E0
WRITE(DAC0_SYNC, LOW);
WRITE(DAC0_SYNC_PIN, LOW);
DELAY_US(2);
WRITE(DAC0_SYNC, HIGH);
WRITE(DAC0_SYNC_PIN, HIGH);
DELAY_US(2);
WRITE(DAC0_SYNC, LOW);
WRITE(DAC0_SYNC_PIN, LOW);
}
DELAY_US(2);
@ -85,13 +85,13 @@ void dac084s085::setValue(const uint8_t channel, const uint8_t value) {
}
void dac084s085::cshigh() {
WRITE(DAC0_SYNC, HIGH);
WRITE(DAC0_SYNC_PIN, HIGH);
#if HAS_MULTI_EXTRUDER
WRITE(DAC1_SYNC, HIGH);
WRITE(DAC1_SYNC_PIN, HIGH);
#endif
WRITE(SPI_EEPROM1_CS, HIGH);
WRITE(SPI_EEPROM2_CS, HIGH);
WRITE(SPI_FLASH_CS, HIGH);
WRITE(SPI_EEPROM1_CS_PIN, HIGH);
WRITE(SPI_EEPROM2_CS_PIN, HIGH);
WRITE(SPI_FLASH_CS_PIN, HIGH);
WRITE(SD_SS_PIN, HIGH);
}

2
Marlin/src/gcode/control/M80_M81.cpp
View File

@ -60,7 +60,7 @@
* a print without suicide...
*/
#if HAS_SUICIDE
OUT_WRITE(SUICIDE_PIN, !SUICIDE_PIN_INVERTING);
OUT_WRITE(SUICIDE_PIN, !SUICIDE_PIN_STATE);
#endif
TERN_(HAS_LCD_MENU, ui.reset_status());

7
Marlin/src/inc/SanityCheck.h
View File

@ -3475,6 +3475,13 @@ static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
#endif
#endif
/**
* Validate MKS_PWC
*/
#if ENABLED(MKS_PWC) && PSU_ACTIVE_STATE != HIGH
#error "MKS_PWC requires PSU_ACTIVE_STATE to be set HIGH."
#endif
/**
* Ensure this option is set intentionally
*/

2
Marlin/src/lcd/extui/dgus/mks/DGUSDisplayDef.h
View File

@ -30,7 +30,7 @@
#if ENABLED(DGUS_MKS_RUNOUT_SENSOR)
#define MT_DET_1_PIN 1
#define MT_DET_2_PIN 2
#define MT_DET_PIN_INVERTING false
#define MT_DET_PIN_STATE LOW
#endif
#define MKS_FINSH

6
Marlin/src/lcd/extui/dgus/mks/DGUSScreenHandler.cpp
View File

@ -1495,17 +1495,17 @@ void DGUSScreenHandler::DGUS_Runout_Idle(void) {
break;
case UNRUNOUT_STATUS:
if (READ(MT_DET_1_PIN) == LOW)
if (READ(MT_DET_1_PIN) == MT_DET_PIN_STATE)
runout_mks.runout_status = RUNOUT_STATUS;
break;
case RUNOUT_BEGIN_STATUS:
if (READ(MT_DET_1_PIN) == HIGH)
if (READ(MT_DET_1_PIN) != MT_DET_PIN_STATE)
runout_mks.runout_status = RUNOUT_WAITTING_STATUS;
break;
case RUNOUT_WAITTING_STATUS:
if (READ(MT_DET_1_PIN) == LOW)
if (READ(MT_DET_1_PIN) == MT_DET_PIN_STATE)
runout_mks.runout_status = RUNOUT_BEGIN_STATUS;
break;

6
Marlin/src/lcd/extui/mks_ui/printer_operation.cpp
View File

@ -163,7 +163,7 @@ void filament_check() {
#endif
#if PIN_EXISTS(MT_DET_1)
static int fil_det_count_1 = 0;
if (READ(MT_DET_1_PIN) == MT_DET_PIN_INVERTING)
if (READ(MT_DET_1_PIN) == MT_DET_PIN_STATE)
fil_det_count_1++;
else if (fil_det_count_1 > 0)
fil_det_count_1--;
@ -171,7 +171,7 @@ void filament_check() {
#if PIN_EXISTS(MT_DET_2)
static int fil_det_count_2 = 0;
if (READ(MT_DET_2_PIN) == MT_DET_PIN_INVERTING)
if (READ(MT_DET_2_PIN) == MT_DET_PIN_STATE)
fil_det_count_2++;
else if (fil_det_count_2 > 0)
fil_det_count_2--;
@ -179,7 +179,7 @@ void filament_check() {
#if PIN_EXISTS(MT_DET_3)
static int fil_det_count_3 = 0;
if (READ(MT_DET_3_PIN) == MT_DET_PIN_INVERTING)
if (READ(MT_DET_3_PIN) == MT_DET_PIN_STATE)
fil_det_count_3++;
else if (fil_det_count_3 > 0)
fil_det_count_3--;

48
Marlin/src/libs/W25Qxx.cpp
View File

@ -28,26 +28,14 @@
W25QXXFlash W25QXX;
#ifndef SPI_FLASH_MISO_PIN
#define SPI_FLASH_MISO_PIN W25QXX_MISO_PIN
#endif
#ifndef SPI_FLASH_MOSI_PIN
#define SPI_FLASH_MOSI_PIN W25QXX_MOSI_PIN
#endif
#ifndef SPI_FLASH_SCK_PIN
#define SPI_FLASH_SCK_PIN W25QXX_SCK_PIN
#endif
#ifndef SPI_FLASH_CS_PIN
#define SPI_FLASH_CS_PIN W25QXX_CS_PIN
#endif
#ifndef NC
#define NC -1
#endif
MarlinSPI W25QXXFlash::mySPI(SPI_FLASH_MOSI_PIN, SPI_FLASH_MISO_PIN, SPI_FLASH_SCK_PIN, NC);
#define W25QXX_CS_H OUT_WRITE(SPI_FLASH_CS_PIN, HIGH)
#define W25QXX_CS_L OUT_WRITE(SPI_FLASH_CS_PIN, LOW)
#define SPI_FLASH_CS_H() OUT_WRITE(SPI_FLASH_CS_PIN, HIGH)
#define SPI_FLASH_CS_L() OUT_WRITE(SPI_FLASH_CS_PIN, LOW)
bool flash_dma_mode = true;
@ -134,24 +122,24 @@ void W25QXXFlash::spi_flash_SendBlock(uint8_t token, const uint8_t *buf) {
uint16_t W25QXXFlash::W25QXX_ReadID(void) {
uint16_t Temp = 0;
W25QXX_CS_L;
SPI_FLASH_CS_L();
spi_flash_Send(0x90);
spi_flash_Send(0x00);
spi_flash_Send(0x00);
spi_flash_Send(0x00);
Temp |= spi_flash_Rec() << 8;
Temp |= spi_flash_Rec();
W25QXX_CS_H;
SPI_FLASH_CS_H();
return Temp;
}
void W25QXXFlash::SPI_FLASH_WriteEnable(void) {
// Select the FLASH: Chip Select low
W25QXX_CS_L;
SPI_FLASH_CS_L();
// Send "Write Enable" instruction
spi_flash_Send(W25X_WriteEnable);
// Deselect the FLASH: Chip Select high
W25QXX_CS_H;
SPI_FLASH_CS_H();
}
/*******************************************************************************
@ -167,7 +155,7 @@ void W25QXXFlash::SPI_FLASH_WaitForWriteEnd(void) {
uint8_t FLASH_Status = 0;
// Select the FLASH: Chip Select low
W25QXX_CS_L;
SPI_FLASH_CS_L();
// Send "Read Status Register" instruction
spi_flash_Send(W25X_ReadStatusReg);
@ -179,7 +167,7 @@ void W25QXXFlash::SPI_FLASH_WaitForWriteEnd(void) {
while ((FLASH_Status & WIP_Flag) == 0x01); // Write in progress
// Deselect the FLASH: Chip Select high
W25QXX_CS_H;
SPI_FLASH_CS_H();
}
void W25QXXFlash::SPI_FLASH_SectorErase(uint32_t SectorAddr) {
@ -188,7 +176,7 @@ void W25QXXFlash::SPI_FLASH_SectorErase(uint32_t SectorAddr) {
// Sector Erase
// Select the FLASH: Chip Select low
W25QXX_CS_L;
SPI_FLASH_CS_L();
// Send Sector Erase instruction
spi_flash_Send(W25X_SectorErase);
// Send SectorAddr high nybble address byte
@ -199,14 +187,14 @@ void W25QXXFlash::SPI_FLASH_SectorErase(uint32_t SectorAddr) {
spi_flash_Send(SectorAddr & 0xFF);
// Deselect the FLASH: Chip Select high
W25QXX_CS_H;
SPI_FLASH_CS_H();
// Wait the end of Flash writing
SPI_FLASH_WaitForWriteEnd();
}
void W25QXXFlash::SPI_FLASH_BlockErase(uint32_t BlockAddr) {
SPI_FLASH_WriteEnable();
W25QXX_CS_L;
SPI_FLASH_CS_L();
// Send Sector Erase instruction
spi_flash_Send(W25X_BlockErase);
// Send SectorAddr high nybble address byte
@ -216,7 +204,7 @@ void W25QXXFlash::SPI_FLASH_BlockErase(uint32_t BlockAddr) {
// Send SectorAddr low nybble address byte
spi_flash_Send(BlockAddr & 0xFF);
W25QXX_CS_H;
SPI_FLASH_CS_H();
SPI_FLASH_WaitForWriteEnd();
}
@ -234,12 +222,12 @@ void W25QXXFlash::SPI_FLASH_BulkErase(void) {
// Bulk Erase
// Select the FLASH: Chip Select low
W25QXX_CS_L;
SPI_FLASH_CS_L();
// Send Bulk Erase instruction
spi_flash_Send(W25X_ChipErase);
// Deselect the FLASH: Chip Select high
W25QXX_CS_H;
SPI_FLASH_CS_H();
// Wait the end of Flash writing
SPI_FLASH_WaitForWriteEnd();
}
@ -262,7 +250,7 @@ void W25QXXFlash::SPI_FLASH_PageWrite(uint8_t *pBuffer, uint32_t WriteAddr, uint
SPI_FLASH_WriteEnable();
// Select the FLASH: Chip Select low
W25QXX_CS_L;
SPI_FLASH_CS_L();
// Send "Write to Memory " instruction
spi_flash_Send(W25X_PageProgram);
// Send WriteAddr high nybble address byte to write to
@ -283,7 +271,7 @@ void W25QXXFlash::SPI_FLASH_PageWrite(uint8_t *pBuffer, uint32_t WriteAddr, uint
}
// Deselect the FLASH: Chip Select high
W25QXX_CS_H;
SPI_FLASH_CS_H();
// Wait the end of Flash writing
SPI_FLASH_WaitForWriteEnd();
@ -366,7 +354,7 @@ void W25QXXFlash::SPI_FLASH_BufferWrite(uint8_t *pBuffer, uint32_t WriteAddr, ui
*******************************************************************************/
void W25QXXFlash::SPI_FLASH_BufferRead(uint8_t *pBuffer, uint32_t ReadAddr, uint16_t NumByteToRead) {
// Select the FLASH: Chip Select low
W25QXX_CS_L;
SPI_FLASH_CS_L();
// Send "Read from Memory " instruction
spi_flash_Send(W25X_ReadData);
@ -389,7 +377,7 @@ void W25QXXFlash::SPI_FLASH_BufferRead(uint8_t *pBuffer, uint32_t ReadAddr, uint
else
spi_flash_Read(pBuffer, NumByteToRead);
W25QXX_CS_H;
SPI_FLASH_CS_H();
}
#endif // HAS_SPI_FLASH

8
Marlin/src/pins/linux/pins_RAMPS_LINUX.h
View File

@ -416,10 +416,10 @@
#if HAS_SPI_FLASH
#define SPI_DEVICE 1
#define SPI_FLASH_SIZE 0x1000000 // 16MB
#define W25QXX_CS_PIN 31
#define W25QXX_MOSI_PIN SD_MOSI_PIN
#define W25QXX_MISO_PIN SD_MISO_PIN
#define W25QXX_SCK_PIN SD_SCK_PIN
#define SPI_FLASH_CS_PIN 31
#define SPI_FLASH_MOSI_PIN SD_MOSI_PIN
#define SPI_FLASH_MISO_PIN SD_MISO_PIN
#define SPI_FLASH_SCK_PIN SD_SCK_PIN
#endif
#define TFT_BUFFER_SIZE 0xFFFF

6
Marlin/src/pins/lpc1768/pins_MKS_SBASE.h
View File

@ -138,15 +138,11 @@
//
// Power Supply Control
//
#if ENABLED(PSU_CONTROL) // MKSPWC
#ifndef PS_ON_PIN
#if ENABLED(MKS_PWC)
#define PS_ON_PIN P0_25 // SERVO
#endif
#ifndef KILL_PIN
#define KILL_PIN P1_29 // Z+
#define KILL_PIN_STATE HIGH
#endif
#endif
//
// Ethernet pins

6
Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h
View File

@ -218,15 +218,11 @@
//
// Power Supply Control
//
#if ENABLED(PSU_CONTROL) // MKSPWC
#ifndef PS_ON_PIN
#if ENABLED(MKS_PWC)
#define PS_ON_PIN P2_00 // SERVO
#endif
#ifndef KILL_PIN
#define KILL_PIN P1_24 // Z+
#define KILL_PIN_STATE HIGH
#endif
#endif
//
// Misc. Functions

10
Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h
View File

@ -229,15 +229,11 @@
//
// Power Supply Control
//
#if ENABLED(PSU_CONTROL) // MKSPWC
#ifndef PS_ON_PIN
#define PS_ON_PIN P2_00 // Suggestion (SERVO)
#endif
#ifndef KILL_PIN
#define KILL_PIN P1_24 // Suggestion (Z+)
#if ENABLED(MKS_PWC)
#define PS_ON_PIN P2_00 // SERVO
#define KILL_PIN P1_24 // Z+
#define KILL_PIN_STATE HIGH
#endif
#endif
//
// RGB LED

20
Marlin/src/pins/pinsDebug_list.h
View File

@ -291,11 +291,11 @@
#if PIN_EXISTS(DAC_DISABLE)
REPORT_NAME_DIGITAL(__LINE__, DAC_DISABLE_PIN)
#endif
#if defined(DAC0_SYNC) && DAC0_SYNC >= 0
REPORT_NAME_DIGITAL(__LINE__, DAC0_SYNC)
#if PIN_EXISTS(DAC0_SYNC)
REPORT_NAME_DIGITAL(__LINE__, DAC0_SYNC_PIN)
#endif
#if defined(DAC1_SYNC) && DAC1_SYNC >= 0
REPORT_NAME_DIGITAL(__LINE__, DAC1_SYNC)
#if PIN_EXISTS(DAC1_SYNC)
REPORT_NAME_DIGITAL(__LINE__, DAC1_SYNC_PIN)
#endif
#if PIN_EXISTS(DEBUG)
REPORT_NAME_DIGITAL(__LINE__, DEBUG_PIN)
@ -974,14 +974,14 @@
#if defined(SPARE_IO) && SPARE_IO >= 0
REPORT_NAME_DIGITAL(__LINE__, SPARE_IO)
#endif
#if defined(SPI_EEPROM1_CS) && SPI_EEPROM1_CS >= 0
REPORT_NAME_DIGITAL(__LINE__, SPI_EEPROM1_CS)
#if PIN_EXISTS(SPI_EEPROM1_CS)
REPORT_NAME_DIGITAL(__LINE__, SPI_EEPROM1_CS_PIN)
#endif
#if defined(SPI_EEPROM2_CS) && SPI_EEPROM2_CS >= 0
REPORT_NAME_DIGITAL(__LINE__, SPI_EEPROM2_CS)
#if PIN_EXISTS(SPI_EEPROM2_CS)
REPORT_NAME_DIGITAL(__LINE__, SPI_EEPROM2_CS_PIN)
#endif
#if defined(SPI_FLASH_CS) && SPI_FLASH_CS >= 0
REPORT_NAME_DIGITAL(__LINE__, SPI_FLASH_CS)
#if PIN_EXISTS(SPI_FLASH_CS)
REPORT_NAME_DIGITAL(__LINE__, SPI_FLASH_CS_PIN)
#endif
#if PIN_EXISTS(SPINDLE_DIR)
REPORT_NAME_DIGITAL(__LINE__, SPINDLE_DIR_PIN)

4
Marlin/src/pins/pins_postprocess.h
View File

@ -391,8 +391,8 @@
#ifndef SUICIDE_PIN
#define SUICIDE_PIN -1
#endif
#ifndef SUICIDE_PIN_INVERTING
#define SUICIDE_PIN_INVERTING false
#ifndef SUICIDE_PIN_STATE
#define SUICIDE_PIN_STATE LOW
#endif
#ifndef NUM_SERVO_PLUGS

2
Marlin/src/pins/ramps/pins_FYSETC_F6_13.h
View File

@ -34,7 +34,7 @@
#endif
#define RESET_PIN 30
#define SPI_FLASH_CS 83
#define SPI_FLASH_CS_PIN 83
//
// Servos

4
Marlin/src/pins/ramps/pins_RAMPS_CREALITY.h
View File

@ -63,6 +63,6 @@
#define EXP4_PIN 12 // PS_ON_PIN
#define SUICIDE_PIN 12 // Used by CR2020 Industrial series
#ifndef SUICIDE_PIN_INVERTING
#define SUICIDE_PIN_INVERTING true
#ifndef SUICIDE_PIN_STATE
#define SUICIDE_PIN_STATE HIGH
#endif

10
Marlin/src/pins/sam/pins_ALLIGATOR_R2.h
View File

@ -123,20 +123,20 @@
#define SPI_CHAN_DAC 1
#define DAC0_SYNC 53 // PB14
#define DAC1_SYNC 6 // PC24
#define DAC0_SYNC_PIN 53 // PB14
#define DAC1_SYNC_PIN 6 // PC24
// 64K SPI EEPROM
#define SPI_EEPROM
#define SPI_CHAN_EEPROM1 2
#define SPI_EEPROM1_CS 25 // PD0
#define SPI_EEPROM1_CS_PIN 25 // PD0
// 2K SPI EEPROM
#define SPI_EEPROM2_CS 26 // PD1
#define SPI_EEPROM2_CS_PIN 26 // PD1
// FLASH SPI
// 32Mb
#define SPI_FLASH_CS 23 // PA14
#define SPI_FLASH_CS_PIN 23 // PA14
//
// LCD / Controller

6
Marlin/src/pins/sam/pins_RURAMPS4D_11.h
View File

@ -190,11 +190,11 @@
//#define EEPROM_SD // EEPROM on SDCARD
//#define SPI_EEPROM // EEPROM on SPI-0
//#define SPI_CHAN_EEPROM1 ?
//#define SPI_EEPROM1_CS ?
//#define SPI_EEPROM1_CS_PIN ?
// 2K EEPROM
//#define SPI_EEPROM2_CS ?
//#define SPI_EEPROM2_CS_PIN ?
// 32Mb FLASH
//#define SPI_FLASH_CS ?
//#define SPI_FLASH_CS_PIN ?
//
// LCD / Controller

6
Marlin/src/pins/sam/pins_RURAMPS4D_13.h
View File

@ -176,11 +176,11 @@
//#define EEPROM_SD // EEPROM on SDCARD
//#define SPI_EEPROM // EEPROM on SPI-0
//#define SPI_CHAN_EEPROM1 ?
//#define SPI_EEPROM1_CS ?
//#define SPI_EEPROM1_CS_PIN ?
// 2K EEPROM
//#define SPI_EEPROM2_CS ?
//#define SPI_EEPROM2_CS_PIN ?
// 32Mb FLASH
//#define SPI_FLASH_CS ?
//#define SPI_FLASH_CS_PIN ?
//
// LCD / Controller

8
Marlin/src/pins/sam/pins_ULTRATRONICS_PRO.h
View File

@ -137,13 +137,13 @@
// SPI Buses
//
#define DAC0_SYNC 53 // PB14
#define DAC0_SYNC_PIN 53 // PB14
#define SPI_CHAN_DAC 1
#define SPI_CHAN_EEPROM1 -1
#define SPI_EEPROM1_CS -1
#define SPI_EEPROM2_CS -1
#define SPI_FLASH_CS -1
#define SPI_EEPROM1_CS_PIN -1
#define SPI_EEPROM2_CS_PIN -1
#define SPI_FLASH_CS_PIN -1
#define SD_SCK_PIN 76
#define SD_MISO_PIN 74

4
Marlin/src/pins/stm32f1/pins_BTT_SKR_CR6.h
View File

@ -179,6 +179,6 @@
#endif
#define SUICIDE_PIN PC13
#ifndef SUICIDE_PIN_INVERTING
#define SUICIDE_PIN_INVERTING false
#ifndef SUICIDE_PIN_STATE
#define SUICIDE_PIN_STATE LOW
#endif

8
Marlin/src/pins/stm32f1/pins_CHITU3D_common.h
View File

@ -120,10 +120,10 @@
#endif
// SPI 2
#define W25QXX_CS_PIN PB12
#define W25QXX_MOSI_PIN PB15
#define W25QXX_MISO_PIN PB14
#define W25QXX_SCK_PIN PB13
#define SPI_FLASH_CS_PIN PB12
#define SPI_FLASH_MOSI_PIN PB15
#define SPI_FLASH_MISO_PIN PB14
#define SPI_FLASH_SCK_PIN PB13
//
// TFT with FSMC interface

6
Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h
View File

@ -61,13 +61,13 @@
// SPI
//#define SPI_EEPROM // EEPROM on SPI-0
//#define SPI_CHAN_EEPROM1 ?
//#define SPI_EEPROM1_CS ?
//#define SPI_EEPROM1_CS_PIN ?
// 2K EEPROM
//#define SPI_EEPROM2_CS ?
//#define SPI_EEPROM2_CS_PIN ?
// 32Mb FLASH
//#define SPI_FLASH_CS ?
//#define SPI_FLASH_CS_PIN ?
#endif
//

14
Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h
View File

@ -73,10 +73,10 @@
#if HAS_SPI_FLASH
// SPI 2
#define W25QXX_CS_PIN PB12 // SPI2_NSS / Flash chip-select
#define W25QXX_MOSI_PIN PB15
#define W25QXX_MISO_PIN PB14
#define W25QXX_SCK_PIN PB13
#define SPI_FLASH_CS_PIN PB12 // SPI2_NSS / Flash chip-select
#define SPI_FLASH_MOSI_PIN PB15
#define SPI_FLASH_MISO_PIN PB14
#define SPI_FLASH_SCK_PIN PB13
#endif
//
@ -222,9 +222,11 @@
//#define PS_ON_PIN PA3 // PW_CN /PW_OFF
#endif
#if HAS_TFT_LVGL_UI
#define MT_DET_1_PIN PA4 // MT_DET
#define MT_DET_2_PIN PE6 // FALA_CRTL
#define MT_DET_PIN_INVERTING false
#define MT_DET_2_PIN PE6
#define MT_DET_PIN_STATE LOW
#endif
//
// LED / NEOPixel

16
Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h
View File

@ -170,18 +170,18 @@
#if ENABLED(SPI_EEPROM)
// SPI1 EEPROM Winbond W25Q64 (8MB/64Mbits)
#define SPI_CHAN_EEPROM1 1
#define SPI_EEPROM1_CS PC5 // pin 34
#define EEPROM_SCK BOARD_SPI1_SCK_PIN // PA5 pin 30
#define EEPROM_MISO BOARD_SPI1_MISO_PIN // PA6 pin 31
#define EEPROM_MOSI BOARD_SPI1_MOSI_PIN // PA7 pin 32
#define SPI_EEPROM1_CS_PIN PC5 // pin 34
#define EEPROM_SCK_PIN BOARD_SPI1_SCK_PIN // PA5 pin 30
#define EEPROM_MISO_PIN BOARD_SPI1_MISO_PIN // PA6 pin 31
#define EEPROM_MOSI_PIN BOARD_SPI1_MOSI_PIN // PA7 pin 32
#define EEPROM_PAGE_SIZE 0x1000U // 4KB (from datasheet)
#define MARLIN_EEPROM_SIZE 16UL * (EEPROM_PAGE_SIZE) // Limit to 64KB for now...
#elif HAS_SPI_FLASH
#define SPI_FLASH_SIZE 0x40000U // limit to 256KB (M993 will reboot with 512)
#define W25QXX_CS_PIN PC5
#define W25QXX_MOSI_PIN PA7
#define W25QXX_MISO_PIN PA6
#define W25QXX_SCK_PIN PA5
#define SPI_FLASH_CS_PIN PC5
#define SPI_FLASH_MOSI_PIN PA7
#define SPI_FLASH_MISO_PIN PA6
#define SPI_FLASH_SCK_PIN PA5
#elif ENABLED(FLASH_EEPROM_EMULATION)
// SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h)
#define EEPROM_PAGE_SIZE (0x800U) // 2KB

8
Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h
View File

@ -275,8 +275,8 @@
#define HAS_SPI_FLASH 1
#if HAS_SPI_FLASH
#define SPI_FLASH_SIZE 0x800000 // 8MB
#define W25QXX_CS_PIN PG9
#define W25QXX_MOSI_PIN PB15
#define W25QXX_MISO_PIN PB14
#define W25QXX_SCK_PIN PB13
#define SPI_FLASH_CS_PIN PG9
#define SPI_FLASH_MOSI_PIN PB15
#define SPI_FLASH_MISO_PIN PB14
#define SPI_FLASH_SCK_PIN PB13
#endif

26
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h
View File

@ -183,19 +183,19 @@
// Misc. Functions
//
#if HAS_TFT_LVGL_UI
#if ENABLED(PSU_CONTROL) // MKSPWC
#define SUICIDE_PIN PB2 // PW_OFF
#define SUICIDE_PIN_INVERTING false
#define KILL_PIN PA2 // PW_DET
#if ENABLED(MKS_PWC)
#define SUICIDE_PIN PB2
#define SUICIDE_PIN_STATE LOW
#define KILL_PIN PA2
#define KILL_PIN_STATE HIGH
#endif
#define MT_DET_1_PIN PA4 // LVGL UI FILAMENT RUNOUT1 PIN
#define MT_DET_PIN_INVERTING false // LVGL UI filament RUNOUT PIN STATE
#define MT_DET_1_PIN PA4
#define MT_DET_PIN_STATE LOW
#define WIFI_IO0_PIN PC13 // MKS ESP WIFI IO0 PIN
#define WIFI_IO1_PIN PC7 // MKS ESP WIFI IO1 PIN
#define WIFI_RESET_PIN PE9 // MKS ESP WIFI RESET PIN
#define WIFI_IO0_PIN PC13
#define WIFI_IO1_PIN PC7
#define WIFI_RESET_PIN PE9
#if ENABLED(MKS_TEST)
#define MKS_TEST_POWER_LOSS_PIN PA2 // PW_DET
@ -363,10 +363,10 @@
#define HAS_SPI_FLASH 1
#if HAS_SPI_FLASH
#define SPI_FLASH_SIZE 0x1000000 // 16MB
#define W25QXX_CS_PIN PB12
#define W25QXX_MOSI_PIN PB15
#define W25QXX_MISO_PIN PB14
#define W25QXX_SCK_PIN PB13
#define SPI_FLASH_CS_PIN PB12
#define SPI_FLASH_MOSI_PIN PB15
#define SPI_FLASH_MISO_PIN PB14
#define SPI_FLASH_SCK_PIN PB13
#endif
#ifndef BEEPER_PIN

6
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h
View File

@ -129,15 +129,11 @@
//
// Power Supply Control
//
#if ENABLED(PSU_CONTROL) // MKSPWC
#ifndef PS_ON_PIN
#if ENABLED(MKS_PWC)
#define PS_ON_PIN PA14 // PW_OFF
#endif
#ifndef KILL_PIN
#define KILL_PIN PB10 // PW_DET
#define KILL_PIN_STATE HIGH
#endif
#endif
/**
* _____ _____ _____

14
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h
View File

@ -119,8 +119,10 @@
#define POWER_LOSS_PIN PA2 // PW_DET
#define PS_ON_PIN PA3 // PW_OFF
#define MT_DET_1_PIN PA4
#define MT_DET_PIN_INVERTING false
#if HAS_TFT_LVGL_UI
#define MT_DET_1_PIN PA4 // MT_DET
#define MT_DET_PIN_STATE LOW
#endif
#define WIFI_IO0_PIN PC13
@ -194,8 +196,8 @@
#define HAS_SPI_FLASH 1
#if HAS_SPI_FLASH
#define SPI_FLASH_SIZE 0x1000000 // 16MB
#define W25QXX_CS_PIN PB12 // Flash chip-select
#define W25QXX_MOSI_PIN PB15
#define W25QXX_MISO_PIN PB14
#define W25QXX_SCK_PIN PB13
#define SPI_FLASH_CS_PIN PB12 // Flash chip-select
#define SPI_FLASH_MOSI_PIN PB15
#define SPI_FLASH_MISO_PIN PB14
#define SPI_FLASH_SCK_PIN PB13
#endif

39
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h
View File

@ -130,33 +130,30 @@
//
// Power Supply Control
//
#if ENABLED(PSU_CONTROL) // MKSPWC
#if HAS_TFT_LVGL_UI
#error "PSU_CONTROL cannot be used with TFT_LVGL_UI. Disable PSU_CONTROL to continue."
#if ENABLED(MKS_PWC)
#if ENABLED(TFT_LVGL_UI)
#undef PSU_CONTROL
#undef MKS_PWC
#define SUICIDE_PIN PB2
#define SUICIDE_PIN_STATE LOW
#else
#define PS_ON_PIN PB2 // PW_OFF
#endif
#ifndef PS_ON_PIN
#define PS_ON_PIN PB2 // SUICIDE
#endif
#ifndef KILL_PIN
#define KILL_PIN PA2
#define KILL_PIN_STATE HIGH
#endif
#else
#define SUICIDE_PIN PB2
#define SUICIDE_PIN_INVERTING false
#endif
//
// Misc. Functions
//
#if HAS_TFT_LVGL_UI
#define MT_DET_1_PIN PA4 // LVGL UI FILAMENT RUNOUT1 PIN
#define MT_DET_2_PIN PE6 // LVGL UI FILAMENT RUNOUT2 PIN
#define MT_DET_PIN_INVERTING false // LVGL UI filament RUNOUT PIN STATE
#define MT_DET_1_PIN PA4
#define MT_DET_2_PIN PE6
#define MT_DET_PIN_STATE LOW
#define WIFI_IO0_PIN PC13 // MKS ESP WIFI IO0 PIN
#define WIFI_IO1_PIN PC7 // MKS ESP WIFI IO1 PIN
#define WIFI_RESET_PIN PA5 // MKS ESP WIFI RESET PIN
#define WIFI_IO0_PIN PC13
#define WIFI_IO1_PIN PC7
#define WIFI_RESET_PIN PA5
#else
//#define POWER_LOSS_PIN PA2 // PW_DET
//#define PS_ON_PIN PB2 // PW_OFF
@ -221,8 +218,8 @@
#define HAS_SPI_FLASH 1
#if HAS_SPI_FLASH
#define SPI_FLASH_SIZE 0x1000000 // 16MB
#define W25QXX_CS_PIN PB12
#define W25QXX_MOSI_PIN PB15
#define W25QXX_MISO_PIN PB14
#define W25QXX_SCK_PIN PB13
#define SPI_FLASH_CS_PIN PB12
#define SPI_FLASH_MOSI_PIN PB15
#define SPI_FLASH_MISO_PIN PB14
#define SPI_FLASH_SCK_PIN PB13
#endif

40
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h
View File

@ -194,34 +194,30 @@
//
// Power Supply Control
//
#if ENABLED(PSU_CONTROL) // MKSPWC
#if HAS_TFT_LVGL_UI
#error "PSU_CONTROL cannot be used with TFT_LVGL_UI. Disable PSU_CONTROL to continue."
#if ENABLED(MKS_PWC)
#if ENABLED(TFT_LVGL_UI)
#undef PSU_CONTROL
#undef MKS_PWC
#define SUICIDE_PIN PB2
#define SUICIDE_PIN_STATE LOW
#else
#define PS_ON_PIN PB2 // PW_OFF
#endif
#ifndef PS_ON_PIN
#define PS_ON_PIN PB2 // SUICIDE
#endif
#ifndef KILL_PIN
#define KILL_PIN PA2
#define KILL_PIN_STATE HIGH
#endif
#else
#define SUICIDE_PIN PB2
#define SUICIDE_PIN_INVERTING false
#endif
//
// Misc. Functions
//
#if HAS_TFT_LVGL_UI
#define MT_DET_1_PIN PA4
#define MT_DET_2_PIN PE6
#define MT_DET_PIN_STATE LOW
#define MT_DET_1_PIN PA4 // LVGL UI FILAMENT RUNOUT1 PIN
#define MT_DET_2_PIN PE6 // LVGL UI FILAMENT RUNOUT2 PIN
#define MT_DET_PIN_INVERTING false // LVGL UI filament RUNOUT PIN STATE
#define WIFI_IO0_PIN PC13 // MKS ESP WIFI IO0 PIN
#define WIFI_IO1_PIN PC7 // MKS ESP WIFI IO1 PIN
#define WIFI_RESET_PIN PE9 // MKS ESP WIFI RESET PIN
#define WIFI_IO0_PIN PC13
#define WIFI_IO1_PIN PC7
#define WIFI_RESET_PIN PE9
#if ENABLED(MKS_TEST)
#define MKS_TEST_POWER_LOSS_PIN PA2 // PW_DET
@ -390,10 +386,10 @@
#define HAS_SPI_FLASH 1
#if HAS_SPI_FLASH
#define SPI_FLASH_SIZE 0x1000000 // 16MB
#define W25QXX_CS_PIN PB12
#define W25QXX_MOSI_PIN PB15
#define W25QXX_MISO_PIN PB14
#define W25QXX_SCK_PIN PB13
#define SPI_FLASH_CS_PIN PB12
#define SPI_FLASH_MOSI_PIN PB15
#define SPI_FLASH_MISO_PIN PB14
#define SPI_FLASH_SCK_PIN PB13
#endif
#ifndef BEEPER_PIN

27
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h
View File

@ -186,21 +186,18 @@
//
// Power Supply Control
//
#if ENABLED(PSU_CONTROL) // MKSPWC
#if HAS_TFT_LVGL_UI
#error "PSU_CONTROL cannot be used with TFT_LVGL_UI. Disable PSU_CONTROL to continue."
#if ENABLED(MKS_PWC)
#if ENABLED(TFT_LVGL_UI)
#undef PSU_CONTROL
#undef MKS_PWC
#define SUICIDE_PIN PG11
#define SUICIDE_PIN_STATE LOW
#else
#define PS_ON_PIN PG11 // PW_OFF
#endif
#ifndef PS_ON_PIN
#define PS_ON_PIN PG11 // SUICIDE
#endif
#ifndef KILL_PIN
#define KILL_PIN PA2
#define KILL_PIN_STATE HIGH
#endif
#else
#define SUICIDE_PIN PG11
#define SUICIDE_PIN_INVERTING false
#endif
//
// SD Card
@ -318,8 +315,8 @@
#define HAS_SPI_FLASH 1
#if HAS_SPI_FLASH
#define SPI_FLASH_SIZE 0x1000000 // 16MB
#define W25QXX_CS_PIN PB12 // Flash chip-select
#define W25QXX_MOSI_PIN PB15
#define W25QXX_MISO_PIN PB14
#define W25QXX_SCK_PIN PB13
#define SPI_FLASH_CS_PIN PB12 // Flash chip-select
#define SPI_FLASH_MOSI_PIN PB15
#define SPI_FLASH_MISO_PIN PB14
#define SPI_FLASH_SCK_PIN PB13
#endif

8
Marlin/src/pins/stm32f4/pins_LERDGE_S.h
View File

@ -179,10 +179,10 @@
#if ENABLED(SPI_EEPROM)
// Lerdge has an SPI EEPROM Winbond W25Q128 (128Mbits) https://www.pjrc.com/teensy/W25Q128FV.pdf
#define SPI_CHAN_EEPROM1 1
#define SPI_EEPROM1_CS PB12 // datasheet: /CS pin, found with multimeter, not tested
#define EEPROM_SCK PB13 // datasheet: CLK pin, found with multimeter, not tested
#define EEPROM_MISO PB14 // datasheet: DO pin, found with multimeter, not tested
#define EEPROM_MOSI PB15 // datasheet: DI pin, found with multimeter, not tested
#define SPI_EEPROM1_CS_PIN PB12 // datasheet: /CS pin, found with multimeter, not tested
#define EEPROM_SCK_PIN PB13 // datasheet: CLK pin, found with multimeter, not tested
#define EEPROM_MISO_PIN PB14 // datasheet: DO pin, found with multimeter, not tested
#define EEPROM_MOSI_PIN PB15 // datasheet: DI pin, found with multimeter, not tested
#define EEPROM_PAGE_SIZE 0x1000U // 4KB (from datasheet)
#define MARLIN_EEPROM_SIZE 16UL * (EEPROM_PAGE_SIZE) // Limit to 64KB for now...
#else

26
Marlin/src/pins/stm32f4/pins_MKS_MONSTER8.h
View File

@ -210,32 +210,24 @@
//
// Misc. Functions
//
#define MT_DET_1 PC5 // Y+
#define MT_DET_2 PB12 // Z+
#define PW_DET PC5 // Y+
#define PW_OFF PB12 // Z+
#define MT_DET_1_PIN PW_DET
#define MT_DET_2_PIN PW_OFF
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN MT_DET_1
#define FIL_RUNOUT_PIN MT_DET_1_PIN
#endif
#ifndef FIL_RUNOUT2_PIN
#define FIL_RUNOUT2_PIN MT_DET_2
#define FIL_RUNOUT2_PIN MT_DET_2_PIN
#endif
//
// Power Supply Control
//
#if ENABLED(PSU_CONTROL) // MKSPWC
#ifndef PS_ON_PIN
#define PS_ON_PIN MT_DET_2 // Z+
#endif
#ifndef KILL_PIN
#define KILL_PIN MT_DET_1 // Y+
#define KILL_PIN_STATE HIGH
#endif
#else
#define PW_DET MT_DET_1
#define PW_OFF MT_DET_2
#define POWER_LOSS_PIN PW_DET
#if ENABLED(MKS_PWC)
#define PS_ON_PIN PW_OFF
#define KILL_PIN PW_DET
#define KILL_PIN_STATE HIGH
#endif
// Random Info

52
Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3.h
View File

@ -178,9 +178,11 @@
//
// Misc. Functions
//
#define MT_DET_1_PIN PA4
#if HAS_TFT_LVGL_UI
#define MT_DET_1_PIN PA4 // MT_DET
#define MT_DET_2_PIN PE6
#define MT_DET_PIN_INVERTING false // LVGL UI filament RUNOUT PIN STATE
#define MT_DET_PIN_STATE LOW
#endif
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN MT_DET_1_PIN
@ -189,36 +191,30 @@
#define FIL_RUNOUT2_PIN MT_DET_2_PIN
#endif
//
// Enable MKSPWC support
//
#ifndef POWER_LOSS_PIN
#define POWER_LOSS_PIN PA13 // PW_DET
#endif
//#define SUICIDE_PIN PB2
//#define LED_PIN PB2
//#define KILL_PIN PA2
//#define KILL_PIN_STATE HIGH
//#define KILL_PIN_STATE LOW
//
// Power Supply Control
//
#if ENABLED(PSU_CONTROL) // MKSPWC
#if HAS_TFT_LVGL_UI
#error "PSU_CONTROL cannot be used with TFT_LVGL_UI. Disable PSU_CONTROL to continue."
#if ENABLED(MKS_PWC)
#if ENABLED(TFT_LVGL_UI)
#undef PSU_CONTROL
#undef MKS_PWC
#define SUICIDE_PIN PB2
#define SUICIDE_PIN_STATE LOW
#else
#define PS_ON_PIN PB2 // PW_OFF
#endif
#ifndef PS_ON_PIN
#define PS_ON_PIN PB2 // SUICIDE
#endif
#ifndef KILL_PIN
#define KILL_PIN PA13 // PW_DET
#define KILL_PIN_STATE HIGH
#endif
#else
#define SUICIDE_PIN PB2
#define SUICIDE_PIN_INVERTING false
#endif
#ifndef POWER_LOSS_PIN
#define POWER_LOSS_PIN PA13 // PW_DET
#endif
// Random Info
#define USB_SERIAL -1 // USB Serial
@ -232,9 +228,9 @@
// MKS WIFI MODULE
#if ENABLED(MKS_WIFI_MODULE)
#define WIFI_IO0_PIN PC13 // MKS ESP WIFI IO0 PIN
#define WIFI_IO1_PIN PC7 // MKS ESP WIFI IO1 PIN
#define WIFI_RESET_PIN PE9 // MKS ESP WIFI RESET PIN
#define WIFI_IO0_PIN PC13
#define WIFI_IO1_PIN PC7
#define WIFI_RESET_PIN PE9
#endif
// MKS TEST
@ -276,10 +272,10 @@
#define SPI_DEVICE 2
#define SPI_FLASH_SIZE 0x1000000
#if ENABLED(SPI_FLASH)
#define W25QXX_CS_PIN PB12
#define W25QXX_MOSI_PIN PC3
#define W25QXX_MISO_PIN PC2
#define W25QXX_SCK_PIN PB13
#define SPI_FLASH_CS_PIN PB12
#define SPI_FLASH_MOSI_PIN PC3
#define SPI_FLASH_MISO_PIN PC2
#define SPI_FLASH_SCK_PIN PB13
#endif
/**

20
Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h
View File

@ -195,18 +195,18 @@
//
// Misc. Functions
//
//#define POWER_LOSS_PIN PA2 // PW_DET
//#define PS_ON_PIN PA3 // PW_OFF
//
// Power Supply Control
//
#if ENABLED(PSU_CONTROL) // MKSPWC
//#define SUICIDE_PIN PB2 // LED
//#define KILL_PIN PA2 // PW_DET
//#define KILL_PIN_STATE HIGH
#if ENABLED(MKS_PWC)
#define SUICIDE_PIN PB2
#define KILL_PIN PA2
#define KILL_PIN_STATE LOW
#else
//#define POWER_LOSS_PIN PA2 // PW_DET
//#define LED_PIN PB2
#define LED_PIN PB2
#endif
#ifndef SDCARD_CONNECTION
@ -255,10 +255,10 @@
#define SPI_DEVICE 2
#define SPI_FLASH_SIZE 0x1000000
#if ENABLED(SPI_FLASH)
#define W25QXX_CS_PIN PB12
#define W25QXX_MOSI_PIN PB15
#define W25QXX_MISO_PIN PB14
#define W25QXX_SCK_PIN PB13
#define SPI_FLASH_CS_PIN PB12
#define SPI_FLASH_MOSI_PIN PB15
#define SPI_FLASH_MISO_PIN PB14
#define SPI_FLASH_SCK_PIN PB13
#endif
/**