bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Clean up, optimize ExtUI/TFT code (#21333)

Browse Source
This commit is contained in:
Scott Lahteine 2021-03-12 06:54:42 -06:00
parent 59a9be5f5a
commit ead6d99069
20 changed files with 319 additions and 332 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Marlin/src/feature/bedlevel/bedlevel.cpp
View File

@ -98,7 +98,7 @@ TemporaryBedLevelingState::TemporaryBedLevelingState(const bool enable) : saved(
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
void set_z_fade_height(const float zfh, const bool do_report/*=true*/) { void set_z_fade_height(const float &zfh, const bool do_report/*=true*/) {
if (planner.z_fade_height == zfh) return; if (planner.z_fade_height == zfh) return;

2
Marlin/src/feature/bedlevel/bedlevel.h
View File

@ -38,7 +38,7 @@ void set_bed_leveling_enabled(const bool enable=true);
void reset_bed_level(); void reset_bed_level();
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
void set_z_fade_height(const float zfh, const bool do_report=true); void set_z_fade_height(const float &zfh, const bool do_report=true);
#endif #endif
#if EITHER(MESH_BED_LEVELING, PROBE_MANUALLY) #if EITHER(MESH_BED_LEVELING, PROBE_MANUALLY)

8
Marlin/src/lcd/extui/anycubic_chiron_lcd.cpp
View File

@ -74,7 +74,7 @@ namespace ExtUI {
// into buff. // into buff.
// Example: // Example:
// static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size); // static_assert(sizeof(myDataStruct) <= eeprom_data_size);
// memcpy(buff, &myDataStruct, sizeof(myDataStruct)); // memcpy(buff, &myDataStruct, sizeof(myDataStruct));
} }
@ -84,7 +84,7 @@ namespace ExtUI {
// from buff // from buff
// Example: // Example:
// static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size); // static_assert(sizeof(myDataStruct) <= eeprom_data_size);
// memcpy(&myDataStruct, buff, sizeof(myDataStruct)); // memcpy(&myDataStruct, buff, sizeof(myDataStruct));
} }
@ -101,12 +101,12 @@ namespace ExtUI {
#if HAS_MESH #if HAS_MESH
void onMeshLevelingStart() {} void onMeshLevelingStart() {}
void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float zval) { void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float &zval) {
// Called when any mesh points are updated // Called when any mesh points are updated
//SERIAL_ECHOLNPAIR("onMeshUpdate() x:", xpos, " y:", ypos, " z:", zval); //SERIAL_ECHOLNPAIR("onMeshUpdate() x:", xpos, " y:", ypos, " z:", zval);
} }
void onMeshUpdate(const int8_t xpos, const int8_t ypos, const ExtUI::probe_state_t state) { void onMeshUpdate(const int8_t xpos, const int8_t ypos, const probe_state_t state) {
// Called to indicate a special condition // Called to indicate a special condition
//SERIAL_ECHOLNPAIR("onMeshUpdate() x:", xpos, " y:", ypos, " state:", state); //SERIAL_ECHOLNPAIR("onMeshUpdate() x:", xpos, " y:", ypos, " state:", state);
} }

6
Marlin/src/lcd/extui/anycubic_i3mega_lcd.cpp
View File

@ -65,7 +65,7 @@ namespace ExtUI {
// into buff. // into buff.
// Example: // Example:
// static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size); // static_assert(sizeof(myDataStruct) <= eeprom_data_size);
// memcpy(buff, &myDataStruct, sizeof(myDataStruct)); // memcpy(buff, &myDataStruct, sizeof(myDataStruct));
} }
@ -75,7 +75,7 @@ namespace ExtUI {
// from buff // from buff
// Example: // Example:
// static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size); // static_assert(sizeof(myDataStruct) <= eeprom_data_size);
// memcpy(&myDataStruct, buff, sizeof(myDataStruct)); // memcpy(&myDataStruct, buff, sizeof(myDataStruct));
} }
@ -93,7 +93,7 @@ namespace ExtUI {
void onMeshLevelingStart() {} void onMeshLevelingStart() {}
void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float zval) { void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float &zval) {
// Called when any mesh points are updated // Called when any mesh points are updated
} }
#endif #endif

10
Marlin/src/lcd/extui/dgus_lcd.cpp
View File

@ -61,7 +61,7 @@ namespace ExtUI {
void onUserConfirmRequired(const char * const msg) { void onUserConfirmRequired(const char * const msg) {
if (msg) { if (msg) {
ScreenHandler.sendinfoscreen(PSTR("Please confirm."), nullptr, msg, nullptr, true, true, false, true); ScreenHandler.sendinfoscreen(PSTR("Please confirm."), nullptr, msg, nullptr, true, true, false, true);
ScreenHandler.SetupConfirmAction(ExtUI::setUserConfirmed); ScreenHandler.SetupConfirmAction(setUserConfirmed);
ScreenHandler.GotoScreen(DGUSLCD_SCREEN_POPUP); ScreenHandler.GotoScreen(DGUSLCD_SCREEN_POPUP);
} }
else if (ScreenHandler.getCurrentScreen() == DGUSLCD_SCREEN_POPUP ) { else if (ScreenHandler.getCurrentScreen() == DGUSLCD_SCREEN_POPUP ) {
@ -84,7 +84,7 @@ namespace ExtUI {
// into buff. // into buff.
// Example: // Example:
// static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size); // static_assert(sizeof(myDataStruct) <= eeprom_data_size);
// memcpy(buff, &myDataStruct, sizeof(myDataStruct)); // memcpy(buff, &myDataStruct, sizeof(myDataStruct));
} }
@ -94,7 +94,7 @@ namespace ExtUI {
// from buff // from buff
// Example: // Example:
// static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size); // static_assert(sizeof(myDataStruct) <= eeprom_data_size);
// memcpy(&myDataStruct, buff, sizeof(myDataStruct)); // memcpy(&myDataStruct, buff, sizeof(myDataStruct));
} }
@ -111,11 +111,11 @@ namespace ExtUI {
#if HAS_MESH #if HAS_MESH
void onMeshLevelingStart() {} void onMeshLevelingStart() {}
void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float zval) { void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float &zval) {
// Called when any mesh points are updated // Called when any mesh points are updated
} }
void onMeshUpdate(const int8_t xpos, const int8_t ypos, const ExtUI::probe_state_t state) { void onMeshUpdate(const int8_t xpos, const int8_t ypos, const probe_state_t state) {
// Called to indicate a special condition // Called to indicate a special condition
} }
#endif #endif

8
Marlin/src/lcd/extui/example.cpp
View File

@ -70,7 +70,7 @@ namespace ExtUI {
// into buff. // into buff.
// Example: // Example:
// static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size); // static_assert(sizeof(myDataStruct) <= eeprom_data_size);
// memcpy(buff, &myDataStruct, sizeof(myDataStruct)); // memcpy(buff, &myDataStruct, sizeof(myDataStruct));
} }
@ -80,7 +80,7 @@ namespace ExtUI {
// from buff // from buff
// Example: // Example:
// static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size); // static_assert(sizeof(myDataStruct) <= eeprom_data_size);
// memcpy(&myDataStruct, buff, sizeof(myDataStruct)); // memcpy(&myDataStruct, buff, sizeof(myDataStruct));
} }
@ -97,11 +97,11 @@ namespace ExtUI {
#if HAS_MESH #if HAS_MESH
void onMeshLevelingStart() {} void onMeshLevelingStart() {}
void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float zval) { void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float &zval) {
// Called when any mesh points are updated // Called when any mesh points are updated
} }
void onMeshUpdate(const int8_t xpos, const int8_t ypos, const ExtUI::probe_state_t state) { void onMeshUpdate(const int8_t xpos, const int8_t ypos, const probe_state_t state) {
// Called to indicate a special condition // Called to indicate a special condition
} }
#endif #endif

2
Marlin/src/lcd/extui/lib/anycubic_chiron/FileNavigator.cpp
View File

@ -73,7 +73,7 @@ namespace Anycubic {
// Each time we change folder we reset the file index to 0 and keep track // Each time we change folder we reset the file index to 0 and keep track
// of the current position as the TFT panel isnt aware of folders trees. // of the current position as the TFT panel isnt aware of folders trees.
if (index > 0) { if (index > 0) {
--currentindex; // go back a file to take account off the .. we added to the root. --currentindex; // go back a file to take account of the .. added to the root.
if (index > lastindex) if (index > lastindex)
currentindex += files; currentindex += files;
else else

5
Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft.cpp
View File

@ -288,7 +288,7 @@ namespace Anycubic {
SERIAL_ECHOLNPGM("Select SD file then press resume"); SERIAL_ECHOLNPGM("Select SD file then press resume");
} }
void ChironTFT::SendtoTFT(PGM_P str) { // A helper to print PROGMEN string to the panel void ChironTFT::SendtoTFT(PGM_P str) { // A helper to print PROGMEM string to the panel
#if ACDEBUG(AC_SOME) #if ACDEBUG(AC_SOME)
SERIAL_ECHOPGM_P(str); SERIAL_ECHOPGM_P(str);
#endif #endif
@ -880,6 +880,7 @@ namespace Anycubic {
} break; } break;
} }
} }
} // namespace
} // Anycubic
#endif // ANYCUBIC_LCD_CHIRON #endif // ANYCUBIC_LCD_CHIRON

47
Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft.h
View File

@ -32,9 +32,11 @@
#include "chiron_tft_defs.h" #include "chiron_tft_defs.h"
#include "../../../../inc/MarlinConfigPre.h" #include "../../../../inc/MarlinConfigPre.h"
#include "../../ui_api.h" #include "../../ui_api.h"
namespace Anycubic { namespace Anycubic {
class ChironTFT { class ChironTFT {
private:
static printer_state_t printer_state; static printer_state_t printer_state;
static paused_state_t pause_state; static paused_state_t pause_state;
static heater_state_t hotend_state; static heater_state_t hotend_state;
@ -45,33 +47,34 @@ namespace Anycubic {
static char selectedfile[MAX_PATH_LEN]; static char selectedfile[MAX_PATH_LEN];
static float live_Zoffset; static float live_Zoffset;
static file_menu_t file_menu; static file_menu_t file_menu;
public: public:
ChironTFT(); ChironTFT();
void Startup(); static void Startup();
void IdleLoop(); static void IdleLoop();
void PrinterKilled(PGM_P,PGM_P); static void PrinterKilled(PGM_P,PGM_P);
void MediaEvent(media_event_t); static void MediaEvent(media_event_t);
void TimerEvent(timer_event_t); static void TimerEvent(timer_event_t);
void FilamentRunout(); static void FilamentRunout();
void ConfirmationRequest(const char * const ); static void ConfirmationRequest(const char * const );
void StatusChange(const char * const ); static void StatusChange(const char * const );
void PowerLossRecovery(); static void PowerLossRecovery();
private: private:
void SendtoTFT(PGM_P); static void SendtoTFT(PGM_P);
void SendtoTFTLN(PGM_P); static void SendtoTFTLN(PGM_P);
bool ReadTFTCommand(); static bool ReadTFTCommand();
int8_t Findcmndpos(const char *, char); static int8_t Findcmndpos(const char *, char);
void CheckHeaters(); static void CheckHeaters();
void SendFileList(int8_t); static void SendFileList(int8_t);
void SelectFile(); static void SelectFile();
void InjectCommandandWait(PGM_P); static void InjectCommandandWait(PGM_P);
void ProcessPanelRequest(); static void ProcessPanelRequest();
void PanelInfo(uint8_t); static void PanelInfo(uint8_t);
void PanelAction(uint8_t); static void PanelAction(uint8_t);
void PanelProcess(uint8_t); static void PanelProcess(uint8_t);
}; };
extern ChironTFT Chiron; extern ChironTFT Chiron;
} } // Anycubic

4
Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft_defs.h
View File

@ -109,6 +109,7 @@
#define AC_cmnd_power_loss_recovery PSTR("G28XYR5\nG28Z") // Lift, home X and Y then home Z when in 'safe' position #define AC_cmnd_power_loss_recovery PSTR("G28XYR5\nG28Z") // Lift, home X and Y then home Z when in 'safe' position
namespace Anycubic { namespace Anycubic {
enum heater_state_t : uint8_t { enum heater_state_t : uint8_t {
AC_heater_off, AC_heater_off,
AC_heater_temp_set, AC_heater_temp_set,
@ -148,4 +149,5 @@ namespace Anycubic {
AC_menu_change_to_file, AC_menu_change_to_file,
AC_menu_change_to_command AC_menu_change_to_command
}; };
}
} // Anycubic

214
Marlin/src/lcd/extui/lib/anycubic_i3mega/anycubic_i3mega_lcd.cpp
View File

@ -2,7 +2,7 @@
* anycubic_i3mega_lcd.cpp --- Support for Anycubic i3 Mega TFT * anycubic_i3mega_lcd.cpp --- Support for Anycubic i3 Mega TFT
* Created by Christian Hopp on 09.12.17. * Created by Christian Hopp on 09.12.17.
* Improved by David Ramiro * Improved by David Ramiro
* Converted to ext_iu by John BouAntoun 21 June 2020 * Converted to ExtUI by John BouAntoun 21 June 2020
* *
* This library is free software; you can redistribute it and/or * This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public * modify it under the terms of the GNU Lesser General Public
@ -47,29 +47,31 @@
AnycubicTFTClass AnycubicTFT; AnycubicTFTClass AnycubicTFT;
static void sendNewLine(void) { char AnycubicTFTClass::TFTcmdbuffer[TFTBUFSIZE][TFT_MAX_CMD_SIZE];
LCD_SERIAL.write('\r'); int AnycubicTFTClass::TFTbuflen = 0,
LCD_SERIAL.write('\n'); AnycubicTFTClass::TFTbufindr = 0,
} AnycubicTFTClass::TFTbufindw = 0;
char AnycubicTFTClass::serial3_char;
int AnycubicTFTClass::serial3_count = 0;
char* AnycubicTFTClass::TFTstrchr_pointer;
uint8_t AnycubicTFTClass::SpecialMenu = false;
AnycubicMediaPrintState AnycubicTFTClass::mediaPrintingState = AMPRINTSTATE_NOT_PRINTING;
AnycubicMediaPauseState AnycubicTFTClass::mediaPauseState = AMPAUSESTATE_NOT_PAUSED;
static void send(const char *str) { char AnycubicTFTClass::SelectedDirectory[30];
LCD_SERIAL.print(str); char AnycubicTFTClass::SelectedFile[FILENAME_LENGTH];
}
static void sendLine(const char *str) {
send(str);
sendNewLine();
}
// Serial helpers
static void sendNewLine(void) { LCD_SERIAL.write('\r'); LCD_SERIAL.write('\n'); }
static void send(const char *str) { LCD_SERIAL.print(str); }
static void send_P(PGM_P str) { static void send_P(PGM_P str) {
while (const char c = pgm_read_byte(str++)) while (const char c = pgm_read_byte(str++))
LCD_SERIAL.write(c); LCD_SERIAL.write(c);
} }
static void sendLine(const char *str) { send(str); sendNewLine(); }
static void sendLine_P(PGM_P str) { send_P(str); sendNewLine(); }
static void sendLine_P(PGM_P str) { using namespace ExtUI;
send_P(str);
sendNewLine();
}
AnycubicTFTClass::AnycubicTFTClass() {} AnycubicTFTClass::AnycubicTFTClass() {}
@ -80,7 +82,7 @@ void AnycubicTFTClass::OnSetup() {
LCD_SERIAL.begin(LCD_BAUDRATE); LCD_SERIAL.begin(LCD_BAUDRATE);
SENDLINE_DBG_PGM("J17", "TFT Serial Debug: Main board reset... J17"); // J17 Main board reset SENDLINE_DBG_PGM("J17", "TFT Serial Debug: Main board reset... J17"); // J17 Main board reset
ExtUI::delay_ms(10); delay_ms(10);
// initialise the state of the key pins running on the tft // initialise the state of the key pins running on the tft
#if ENABLED(SDSUPPORT) && PIN_EXISTS(SD_DETECT) #if ENABLED(SDSUPPORT) && PIN_EXISTS(SD_DETECT)
@ -95,13 +97,13 @@ void AnycubicTFTClass::OnSetup() {
// DoSDCardStateCheck(); // DoSDCardStateCheck();
SENDLINE_DBG_PGM("J12", "TFT Serial Debug: Ready... J12"); // J12 Ready SENDLINE_DBG_PGM("J12", "TFT Serial Debug: Ready... J12"); // J12 Ready
ExtUI::delay_ms(10); delay_ms(10);
DoFilamentRunoutCheck(); DoFilamentRunoutCheck();
SelectedFile[0] = 0; SelectedFile[0] = 0;
#if ENABLED(STARTUP_CHIME) #if ENABLED(STARTUP_CHIME)
ExtUI::injectCommands_P(PSTR("M300 P250 S554\nM300 P250 S554\nM300 P250 S740\nM300 P250 S554\nM300 P250 S740\nM300 P250 S554\nM300 P500 S831")); injectCommands_P(PSTR("M300 P250 S554\nM300 P250 S554\nM300 P250 S740\nM300 P250 S554\nM300 P250 S740\nM300 P250 S554\nM300 P500 S831"));
#endif #endif
#if ENABLED(ANYCUBIC_LCD_DEBUG) #if ENABLED(ANYCUBIC_LCD_DEBUG)
SERIAL_ECHOLNPGM("TFT Serial Debug: Finished startup"); SERIAL_ECHOLNPGM("TFT Serial Debug: Finished startup");
@ -119,8 +121,8 @@ void AnycubicTFTClass::OnCommandScan() {
#endif #endif
mediaPrintingState = AMPRINTSTATE_NOT_PRINTING; mediaPrintingState = AMPRINTSTATE_NOT_PRINTING;
mediaPauseState = AMPAUSESTATE_NOT_PAUSED; mediaPauseState = AMPAUSESTATE_NOT_PAUSED;
ExtUI::injectCommands_P(PSTR("M84\nM27")); // disable stepper motors and force report of SD status injectCommands_P(PSTR("M84\nM27")); // disable stepper motors and force report of SD status
ExtUI::delay_ms(200); delay_ms(200);
// tell printer to release resources of print to indicate it is done // tell printer to release resources of print to indicate it is done
SENDLINE_DBG_PGM("J14", "TFT Serial Debug: SD Print Stopped... J14"); SENDLINE_DBG_PGM("J14", "TFT Serial Debug: SD Print Stopped... J14");
} }
@ -224,8 +226,8 @@ bool AnycubicTFTClass::CodeSeen(char code) {
} }
bool AnycubicTFTClass::IsNozzleHomed() { bool AnycubicTFTClass::IsNozzleHomed() {
const float xPosition = ExtUI::getAxisPosition_mm((ExtUI::axis_t) ExtUI::X); const float xPosition = getAxisPosition_mm((axis_t) X);
const float yPosition = ExtUI::getAxisPosition_mm((ExtUI::axis_t) ExtUI::Y); const float yPosition = getAxisPosition_mm((axis_t) Y);
return WITHIN(xPosition, X_MIN_POS - 0.1, X_MIN_POS + 0.1) && return WITHIN(xPosition, X_MIN_POS - 0.1, X_MIN_POS + 0.1) &&
WITHIN(yPosition, Y_MIN_POS - 0.1, Y_MIN_POS + 0.1); WITHIN(yPosition, Y_MIN_POS - 0.1, Y_MIN_POS + 0.1);
} }
@ -246,48 +248,48 @@ void AnycubicTFTClass::HandleSpecialMenu() {
switch (SelectedDirectory[2]) { switch (SelectedDirectory[2]) {
case '1': // "<01ZUp0.1>" case '1': // "<01ZUp0.1>"
SERIAL_ECHOLNPGM("Special Menu: Z Up 0.1"); SERIAL_ECHOLNPGM("Special Menu: Z Up 0.1");
ExtUI::injectCommands_P(PSTR("G91\nG1 Z+0.1\nG90")); injectCommands_P(PSTR("G91\nG1 Z+0.1\nG90"));
break; break;
case '2': // "<02ZUp0.02>" case '2': // "<02ZUp0.02>"
SERIAL_ECHOLNPGM("Special Menu: Z Up 0.02"); SERIAL_ECHOLNPGM("Special Menu: Z Up 0.02");
ExtUI::injectCommands_P(PSTR("G91\nG1 Z+0.02\nG90")); injectCommands_P(PSTR("G91\nG1 Z+0.02\nG90"));
break; break;
case '3': // "<03ZDn0.02>" case '3': // "<03ZDn0.02>"
SERIAL_ECHOLNPGM("Special Menu: Z Down 0.02"); SERIAL_ECHOLNPGM("Special Menu: Z Down 0.02");
ExtUI::injectCommands_P(PSTR("G91\nG1 Z-0.02\nG90")); injectCommands_P(PSTR("G91\nG1 Z-0.02\nG90"));
break; break;
case '4': // "<04ZDn0.1>" case '4': // "<04ZDn0.1>"
SERIAL_ECHOLNPGM("Special Menu: Z Down 0.1"); SERIAL_ECHOLNPGM("Special Menu: Z Down 0.1");
ExtUI::injectCommands_P(PSTR("G91\nG1 Z-0.1\nG90")); injectCommands_P(PSTR("G91\nG1 Z-0.1\nG90"));
break; break;
case '5': // "<05PrehtBed>" case '5': // "<05PrehtBed>"
SERIAL_ECHOLNPGM("Special Menu: Preheat Bed"); SERIAL_ECHOLNPGM("Special Menu: Preheat Bed");
ExtUI::injectCommands_P(PSTR("M140 S65")); injectCommands_P(PSTR("M140 S65"));
break; break;
case '6': // "<06SMeshLvl>" case '6': // "<06SMeshLvl>"
SERIAL_ECHOLNPGM("Special Menu: Start Mesh Leveling"); SERIAL_ECHOLNPGM("Special Menu: Start Mesh Leveling");
ExtUI::injectCommands_P(PSTR("G29S1")); injectCommands_P(PSTR("G29S1"));
break; break;
case '7': // "<07MeshNPnt>" case '7': // "<07MeshNPnt>"
SERIAL_ECHOLNPGM("Special Menu: Next Mesh Point"); SERIAL_ECHOLNPGM("Special Menu: Next Mesh Point");
ExtUI::injectCommands_P(PSTR("G29S2")); injectCommands_P(PSTR("G29S2"));
break; break;
case '8': // "<08HtEndPID>" case '8': // "<08HtEndPID>"
SERIAL_ECHOLNPGM("Special Menu: Auto Tune Hotend PID"); SERIAL_ECHOLNPGM("Special Menu: Auto Tune Hotend PID");
// need to dwell for half a second to give the fan a chance to start before the pid tuning starts // need to dwell for half a second to give the fan a chance to start before the pid tuning starts
ExtUI::injectCommands_P(PSTR("M106 S204\nG4 P500\nM303 E0 S215 C15 U1")); injectCommands_P(PSTR("M106 S204\nG4 P500\nM303 E0 S215 C15 U1"));
break; break;
case '9': // "<09HtBedPID>" case '9': // "<09HtBedPID>"
SERIAL_ECHOLNPGM("Special Menu: Auto Tune Hotbed Pid"); SERIAL_ECHOLNPGM("Special Menu: Auto Tune Hotbed Pid");
ExtUI::injectCommands_P(PSTR("M303 E-1 S65 C6 U1")); injectCommands_P(PSTR("M303 E-1 S65 C6 U1"));
break; break;
default: default:
@ -299,12 +301,12 @@ void AnycubicTFTClass::HandleSpecialMenu() {
switch (SelectedDirectory[2]) { switch (SelectedDirectory[2]) {
case '0': // "<10FWDeflts>" case '0': // "<10FWDeflts>"
SERIAL_ECHOLNPGM("Special Menu: Load FW Defaults"); SERIAL_ECHOLNPGM("Special Menu: Load FW Defaults");
ExtUI::injectCommands_P(PSTR("M502\nM300 P105 S1661\nM300 P210 S1108")); injectCommands_P(PSTR("M502\nM300 P105 S1661\nM300 P210 S1108"));
break; break;
case '1': // "<11SvEEPROM>" case '1': // "<11SvEEPROM>"
SERIAL_ECHOLNPGM("Special Menu: Save EEPROM"); SERIAL_ECHOLNPGM("Special Menu: Save EEPROM");
ExtUI::injectCommands_P(PSTR("M500\nM300 P105 S1108\nM300 P210 S1661")); injectCommands_P(PSTR("M500\nM300 P105 S1108\nM300 P210 S1661"));
break; break;
default: default:
@ -316,38 +318,38 @@ void AnycubicTFTClass::HandleSpecialMenu() {
switch (SelectedDirectory[2]) { switch (SelectedDirectory[2]) {
case '1': // "<01PrehtBed>" case '1': // "<01PrehtBed>"
SERIAL_ECHOLNPGM("Special Menu: Preheat Bed"); SERIAL_ECHOLNPGM("Special Menu: Preheat Bed");
ExtUI::injectCommands_P(PSTR("M140 S65")); injectCommands_P(PSTR("M140 S65"));
break; break;
case '2': // "<02ABL>" case '2': // "<02ABL>"
SERIAL_ECHOLNPGM("Special Menu: Auto Bed Leveling"); SERIAL_ECHOLNPGM("Special Menu: Auto Bed Leveling");
ExtUI::injectCommands_P(PSTR("G29N")); injectCommands_P(PSTR("G29N"));
break; break;
case '3': // "<03HtendPID>" case '3': // "<03HtendPID>"
SERIAL_ECHOLNPGM("Special Menu: Auto Tune Hotend PID"); SERIAL_ECHOLNPGM("Special Menu: Auto Tune Hotend PID");
// need to dwell for half a second to give the fan a chance to start before the pid tuning starts // need to dwell for half a second to give the fan a chance to start before the pid tuning starts
ExtUI::injectCommands_P(PSTR("M106 S204\nG4 P500\nM303 E0 S215 C15 U1")); injectCommands_P(PSTR("M106 S204\nG4 P500\nM303 E0 S215 C15 U1"));
break; break;
case '4': // "<04HtbedPID>" case '4': // "<04HtbedPID>"
SERIAL_ECHOLNPGM("Special Menu: Auto Tune Hotbed Pid"); SERIAL_ECHOLNPGM("Special Menu: Auto Tune Hotbed Pid");
ExtUI::injectCommands_P(PSTR("M303 E-1 S65 C6 U1")); injectCommands_P(PSTR("M303 E-1 S65 C6 U1"));
break; break;
case '5': // "<05FWDeflts>" case '5': // "<05FWDeflts>"
SERIAL_ECHOLNPGM("Special Menu: Load FW Defaults"); SERIAL_ECHOLNPGM("Special Menu: Load FW Defaults");
ExtUI::injectCommands_P(PSTR("M502\nM300 P105 S1661\nM300 P210 S1108")); injectCommands_P(PSTR("M502\nM300 P105 S1661\nM300 P210 S1108"));
break; break;
case '6': // "<06SvEEPROM>" case '6': // "<06SvEEPROM>"
SERIAL_ECHOLNPGM("Special Menu: Save EEPROM"); SERIAL_ECHOLNPGM("Special Menu: Save EEPROM");
ExtUI::injectCommands_P(PSTR("M500\nM300 P105 S1108\nM300 P210 S1661")); injectCommands_P(PSTR("M500\nM300 P105 S1108\nM300 P210 S1661"));
break; break;
case '7': // <07SendM108> case '7': // <07SendM108>
SERIAL_ECHOLNPGM("Special Menu: Send User Confirmation"); SERIAL_ECHOLNPGM("Special Menu: Send User Confirmation");
ExtUI::injectCommands_P(PSTR("M108")); injectCommands_P(PSTR("M108"));
break; break;
default: default:
@ -373,11 +375,11 @@ void AnycubicTFTClass::RenderCurrentFileList() {
uint16_t selectedNumber = 0; uint16_t selectedNumber = 0;
SelectedDirectory[0] = 0; SelectedDirectory[0] = 0;
SelectedFile[0] = 0; SelectedFile[0] = 0;
ExtUI::FileList currentFileList; FileList currentFileList;
SENDLINE_PGM("FN "); // Filelist start SENDLINE_PGM("FN "); // Filelist start
if (!ExtUI::isMediaInserted() && !SpecialMenu) { if (!isMediaInserted() && !SpecialMenu) {
SENDLINE_DBG_PGM("J02", "TFT Serial Debug: No SD Card mounted to render Current File List... J02"); SENDLINE_DBG_PGM("J02", "TFT Serial Debug: No SD Card mounted to render Current File List... J02");
SENDLINE_PGM("<Special_Menu>"); SENDLINE_PGM("<Special_Menu>");
@ -462,7 +464,7 @@ void AnycubicTFTClass::RenderSpecialMenu(uint16_t selectedNumber) {
} }
void AnycubicTFTClass::RenderCurrentFolder(uint16_t selectedNumber) { void AnycubicTFTClass::RenderCurrentFolder(uint16_t selectedNumber) {
ExtUI::FileList currentFileList; FileList currentFileList;
uint16_t cnt = selectedNumber; uint16_t cnt = selectedNumber;
uint16_t max_files; uint16_t max_files;
uint16_t dir_files = currentFileList.count(); uint16_t dir_files = currentFileList.count();
@ -514,7 +516,7 @@ void AnycubicTFTClass::OnPrintTimerStarted() {
void AnycubicTFTClass::OnPrintTimerPaused() { void AnycubicTFTClass::OnPrintTimerPaused() {
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
if (ExtUI::isPrintingFromMedia()) { if (isPrintingFromMedia()) {
mediaPrintingState = AMPRINTSTATE_PAUSED; mediaPrintingState = AMPRINTSTATE_PAUSED;
mediaPauseState = AMPAUSESTATE_PARKING; mediaPauseState = AMPAUSESTATE_PARKING;
} }
@ -558,38 +560,38 @@ void AnycubicTFTClass::GetCommandFromTFT() {
switch (a_command) { switch (a_command) {
case 0: { // A0 GET HOTEND TEMP case 0: { // A0 GET HOTEND TEMP
float hotendActualTemp = ExtUI::getActualTemp_celsius((ExtUI::extruder_t) (ExtUI::extruder_t) ExtUI::E0); float hotendActualTemp = getActualTemp_celsius((extruder_t) (extruder_t) E0);
SEND_PGM_VAL("A0V ", int(hotendActualTemp + 0.5)); SEND_PGM_VAL("A0V ", int(hotendActualTemp + 0.5));
} }
break; break;
case 1: { // A1 GET HOTEND TARGET TEMP case 1: { // A1 GET HOTEND TARGET TEMP
float hotendTargetTemp = ExtUI::getTargetTemp_celsius((ExtUI::extruder_t) (ExtUI::extruder_t) ExtUI::E0); float hotendTargetTemp = getTargetTemp_celsius((extruder_t) (extruder_t) E0);
SEND_PGM_VAL("A1V ", int(hotendTargetTemp + 0.5)); SEND_PGM_VAL("A1V ", int(hotendTargetTemp + 0.5));
} }
break; break;
case 2: { // A2 GET HOTBED TEMP case 2: { // A2 GET HOTBED TEMP
float heatedBedActualTemp = ExtUI::getActualTemp_celsius((ExtUI::heater_t) ExtUI::BED); float heatedBedActualTemp = getActualTemp_celsius((heater_t) BED);
SEND_PGM_VAL("A2V ", int(heatedBedActualTemp + 0.5)); SEND_PGM_VAL("A2V ", int(heatedBedActualTemp + 0.5));
} }
break; break;
case 3: { // A3 GET HOTBED TARGET TEMP case 3: { // A3 GET HOTBED TARGET TEMP
float heatedBedTargetTemp = ExtUI::getTargetTemp_celsius((ExtUI::heater_t) ExtUI::BED); float heatedBedTargetTemp = getTargetTemp_celsius((heater_t) BED);
SEND_PGM_VAL("A3V ", int(heatedBedTargetTemp + 0.5)); SEND_PGM_VAL("A3V ", int(heatedBedTargetTemp + 0.5));
} break; } break;
case 4: { // A4 GET FAN SPEED case 4: { // A4 GET FAN SPEED
float fanPercent = ExtUI::getActualFan_percent(ExtUI::FAN0); float fanPercent = getActualFan_percent(FAN0);
fanPercent = constrain(fanPercent, 0, 100); fanPercent = constrain(fanPercent, 0, 100);
SEND_PGM_VAL("A4V ", int(fanPercent)); SEND_PGM_VAL("A4V ", int(fanPercent));
} break; } break;
case 5: { // A5 GET CURRENT COORDINATE case 5: { // A5 GET CURRENT COORDINATE
const float xPosition = ExtUI::getAxisPosition_mm(ExtUI::X), const float xPosition = getAxisPosition_mm(X),
yPosition = ExtUI::getAxisPosition_mm(ExtUI::Y), yPosition = getAxisPosition_mm(Y),
zPosition = ExtUI::getAxisPosition_mm(ExtUI::Z); zPosition = getAxisPosition_mm(Z);
SEND_PGM("A5V X: "); LCD_SERIAL.print(xPosition); SEND_PGM("A5V X: "); LCD_SERIAL.print(xPosition);
SEND_PGM( " Y: "); LCD_SERIAL.print(yPosition); SEND_PGM( " Y: "); LCD_SERIAL.print(yPosition);
SEND_PGM( " Z: "); LCD_SERIAL.print(zPosition); SEND_PGM( " Z: "); LCD_SERIAL.print(zPosition);
@ -598,10 +600,10 @@ void AnycubicTFTClass::GetCommandFromTFT() {
case 6: // A6 GET SD CARD PRINTING STATUS case 6: // A6 GET SD CARD PRINTING STATUS
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
if (ExtUI::isPrintingFromMedia()) { if (isPrintingFromMedia()) {
SEND_PGM("A6V "); SEND_PGM("A6V ");
if (ExtUI::isMediaInserted()) if (isMediaInserted())
SENDLINE(ui8tostr3rj(ExtUI::getProgress_percent())); SENDLINE(ui8tostr3rj(getProgress_percent()));
else else
SENDLINE_DBG_PGM("J02", "TFT Serial Debug: No SD Card mounted to return printing status... J02"); SENDLINE_DBG_PGM("J02", "TFT Serial Debug: No SD Card mounted to return printing status... J02");
} }
@ -611,7 +613,7 @@ void AnycubicTFTClass::GetCommandFromTFT() {
break; break;
case 7: { // A7 GET PRINTING TIME case 7: { // A7 GET PRINTING TIME
const uint32_t elapsedSeconds = ExtUI::getProgress_seconds_elapsed(); const uint32_t elapsedSeconds = getProgress_seconds_elapsed();
SEND_PGM("A7V "); SEND_PGM("A7V ");
if (elapsedSeconds != 0) { // print time if (elapsedSeconds != 0) { // print time
const uint32_t elapsedMinutes = elapsedSeconds / 60; const uint32_t elapsedMinutes = elapsedSeconds / 60;
@ -634,14 +636,14 @@ void AnycubicTFTClass::GetCommandFromTFT() {
case 9: // A9 pause sd print case 9: // A9 pause sd print
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
if (ExtUI::isPrintingFromMedia()) if (isPrintingFromMedia())
PausePrint(); PausePrint();
#endif #endif
break; break;
case 10: // A10 resume sd print case 10: // A10 resume sd print
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
if (ExtUI::isPrintingFromMediaPaused()) if (isPrintingFromMediaPaused())
ResumePrint(); ResumePrint();
#endif #endif
break; break;
@ -656,7 +658,7 @@ void AnycubicTFTClass::GetCommandFromTFT() {
case 13: // A13 SELECTION FILE case 13: // A13 SELECTION FILE
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
if (ExtUI::isMediaInserted()) { if (isMediaInserted()) {
starpos = (strchr(TFTstrchr_pointer + 4, '*')); starpos = (strchr(TFTstrchr_pointer + 4, '*'));
if (TFTstrchr_pointer[4] == '/') { if (TFTstrchr_pointer[4] == '/') {
strcpy(SelectedDirectory, TFTstrchr_pointer + 5); strcpy(SelectedDirectory, TFTstrchr_pointer + 5);
@ -685,7 +687,7 @@ void AnycubicTFTClass::GetCommandFromTFT() {
case 14: // A14 START PRINTING case 14: // A14 START PRINTING
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
if (!ExtUI::isPrinting() && strlen(SelectedFile) > 0) if (!isPrinting() && strlen(SelectedFile) > 0)
StartPrint(); StartPrint();
#endif #endif
break; break;
@ -698,13 +700,13 @@ void AnycubicTFTClass::GetCommandFromTFT() {
unsigned int tempvalue; unsigned int tempvalue;
if (CodeSeen('S')) { if (CodeSeen('S')) {
tempvalue = constrain(CodeValue(), 0, 275); tempvalue = constrain(CodeValue(), 0, 275);
ExtUI::setTargetTemp_celsius(tempvalue, (ExtUI::extruder_t) ExtUI::E0); setTargetTemp_celsius(tempvalue, (extruder_t) E0);
} }
else if (CodeSeen('C') && !ExtUI::isPrinting()) { else if (CodeSeen('C') && !isPrinting()) {
if (ExtUI::getAxisPosition_mm(ExtUI::Z) < 10) if (getAxisPosition_mm(Z) < 10)
ExtUI::injectCommands_P(PSTR("G1 Z10")); // RASE Z AXIS injectCommands_P(PSTR("G1 Z10")); // RASE Z AXIS
tempvalue = constrain(CodeValue(), 0, 275); tempvalue = constrain(CodeValue(), 0, 275);
ExtUI::setTargetTemp_celsius(tempvalue, (ExtUI::extruder_t) ExtUI::E0); setTargetTemp_celsius(tempvalue, (extruder_t) E0);
} }
} }
break; break;
@ -713,7 +715,7 @@ void AnycubicTFTClass::GetCommandFromTFT() {
unsigned int tempbed; unsigned int tempbed;
if (CodeSeen('S')) { if (CodeSeen('S')) {
tempbed = constrain(CodeValue(), 0, 100); tempbed = constrain(CodeValue(), 0, 100);
ExtUI::setTargetTemp_celsius(tempbed, (ExtUI::heater_t)ExtUI::BED); setTargetTemp_celsius(tempbed, (heater_t)BED);
} }
} }
break; break;
@ -723,18 +725,18 @@ void AnycubicTFTClass::GetCommandFromTFT() {
if (CodeSeen('S')) { if (CodeSeen('S')) {
fanPercent = CodeValue(); fanPercent = CodeValue();
fanPercent = constrain(fanPercent, 0, 100); fanPercent = constrain(fanPercent, 0, 100);
ExtUI::setTargetFan_percent(fanPercent, ExtUI::FAN0); setTargetFan_percent(fanPercent, FAN0);
} }
else else
fanPercent = 100; fanPercent = 100;
ExtUI::setTargetFan_percent(fanPercent, ExtUI::FAN0); setTargetFan_percent(fanPercent, FAN0);
SENDLINE_PGM(""); SENDLINE_PGM("");
} }
break; break;
case 19: // A19 stop stepper drivers - sent on stop extrude command and on turn motors off command case 19: // A19 stop stepper drivers - sent on stop extrude command and on turn motors off command
if (!ExtUI::isPrinting()) { if (!isPrinting()) {
quickstop_stepper(); quickstop_stepper();
disable_all_steppers(); disable_all_steppers();
} }
@ -750,23 +752,23 @@ void AnycubicTFTClass::GetCommandFromTFT() {
break; break;
case 21: // A21 all home case 21: // A21 all home
if (!ExtUI::isPrinting() && !ExtUI::isPrintingFromMediaPaused()) { if (!isPrinting() && !isPrintingFromMediaPaused()) {
if (CodeSeen('X') || CodeSeen('Y') || CodeSeen('Z')) { if (CodeSeen('X') || CodeSeen('Y') || CodeSeen('Z')) {
if (CodeSeen('X')) if (CodeSeen('X'))
ExtUI::injectCommands_P(PSTR("G28X")); injectCommands_P(PSTR("G28X"));
if (CodeSeen('Y')) if (CodeSeen('Y'))
ExtUI::injectCommands_P(PSTR("G28Y")); injectCommands_P(PSTR("G28Y"));
if (CodeSeen('Z')) if (CodeSeen('Z'))
ExtUI::injectCommands_P(PSTR("G28Z")); injectCommands_P(PSTR("G28Z"));
} }
else if (CodeSeen('C')) { else if (CodeSeen('C')) {
ExtUI::injectCommands_P(G28_STR); injectCommands_P(G28_STR);
} }
} }
break; break;
case 22: // A22 move X/Y/Z or extrude case 22: // A22 move X/Y/Z or extrude
if (!ExtUI::isPrinting()) { if (!isPrinting()) {
float coorvalue; float coorvalue;
unsigned int movespeed = 0; unsigned int movespeed = 0;
char commandStr[30]; char commandStr[30];
@ -819,38 +821,38 @@ void AnycubicTFTClass::GetCommandFromTFT() {
SERIAL_ECHOPGM("TFT Serial Debug: A22 Move final request with gcode... "); SERIAL_ECHOPGM("TFT Serial Debug: A22 Move final request with gcode... ");
SERIAL_ECHOLN(fullCommandStr); SERIAL_ECHOLN(fullCommandStr);
#endif #endif
ExtUI::injectCommands(fullCommandStr); injectCommands(fullCommandStr);
} }
} }
SENDLINE_PGM(""); SENDLINE_PGM("");
break; break;
case 23: // A23 preheat pla case 23: // A23 preheat pla
if (!ExtUI::isPrinting()) { if (!isPrinting()) {
if (ExtUI::getAxisPosition_mm(ExtUI::Z) < 10) if (getAxisPosition_mm(Z) < 10)
ExtUI::injectCommands_P(PSTR("G1 Z10")); // RASE Z AXIS injectCommands_P(PSTR("G1 Z10")); // RASE Z AXIS
ExtUI::setTargetTemp_celsius(PREHEAT_1_TEMP_BED, (ExtUI::heater_t) ExtUI::BED); setTargetTemp_celsius(PREHEAT_1_TEMP_BED, (heater_t) BED);
ExtUI::setTargetTemp_celsius(PREHEAT_1_TEMP_HOTEND, (ExtUI::extruder_t) ExtUI::E0); setTargetTemp_celsius(PREHEAT_1_TEMP_HOTEND, (extruder_t) E0);
SENDLINE_PGM("OK"); SENDLINE_PGM("OK");
} }
break; break;
case 24:// A24 preheat abs case 24:// A24 preheat abs
if (!ExtUI::isPrinting()) { if (!isPrinting()) {
if (ExtUI::getAxisPosition_mm(ExtUI::Z) < 10) if (getAxisPosition_mm(Z) < 10)
ExtUI::injectCommands_P(PSTR("G1 Z10")); // RASE Z AXIS injectCommands_P(PSTR("G1 Z10")); // RASE Z AXIS
ExtUI::setTargetTemp_celsius(PREHEAT_2_TEMP_BED, (ExtUI::heater_t) ExtUI::BED); setTargetTemp_celsius(PREHEAT_2_TEMP_BED, (heater_t) BED);
ExtUI::setTargetTemp_celsius(PREHEAT_2_TEMP_HOTEND, (ExtUI::extruder_t) ExtUI::E0); setTargetTemp_celsius(PREHEAT_2_TEMP_HOTEND, (extruder_t) E0);
SENDLINE_PGM("OK"); SENDLINE_PGM("OK");
} }
break; break;
case 25: // A25 cool down case 25: // A25 cool down
if (!ExtUI::isPrinting()) { if (!isPrinting()) {
ExtUI::setTargetTemp_celsius(0, (ExtUI::heater_t) ExtUI::BED); setTargetTemp_celsius(0, (heater_t) BED);
ExtUI::setTargetTemp_celsius(0, (ExtUI::extruder_t) ExtUI::E0); setTargetTemp_celsius(0, (extruder_t) E0);
SENDLINE_DBG_PGM("J12", "TFT Serial Debug: Cooling down... J12"); // J12 cool down SENDLINE_DBG_PGM("J12", "TFT Serial Debug: Cooling down... J12"); // J12 cool down
} }
@ -858,9 +860,9 @@ void AnycubicTFTClass::GetCommandFromTFT() {
case 26: // A26 refresh SD case 26: // A26 refresh SD
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
if (ExtUI::isMediaInserted()) { if (isMediaInserted()) {
if (strlen(SelectedDirectory) > 0) { if (strlen(SelectedDirectory) > 0) {
ExtUI::FileList currentFileList; FileList currentFileList;
if ((SelectedDirectory[0] == '.') && (SelectedDirectory[1] == '.')) { if ((SelectedDirectory[0] == '.') && (SelectedDirectory[1] == '.')) {
currentFileList.upDir(); currentFileList.upDir();
} }
@ -914,7 +916,7 @@ void AnycubicTFTClass::GetCommandFromTFT() {
void AnycubicTFTClass::DoSDCardStateCheck() { void AnycubicTFTClass::DoSDCardStateCheck() {
#if ENABLED(SDSUPPORT) && PIN_EXISTS(SD_DETECT) #if ENABLED(SDSUPPORT) && PIN_EXISTS(SD_DETECT)
bool isInserted = ExtUI::isMediaInserted(); bool isInserted = isMediaInserted();
if (isInserted) if (isInserted)
SENDLINE_DBG_PGM("J00", "TFT Serial Debug: SD card state changed... isInserted"); SENDLINE_DBG_PGM("J00", "TFT Serial Debug: SD card state changed... isInserted");
else else
@ -925,12 +927,12 @@ void AnycubicTFTClass::DoSDCardStateCheck() {
void AnycubicTFTClass::DoFilamentRunoutCheck() { void AnycubicTFTClass::DoFilamentRunoutCheck() {
#if ENABLED(FILAMENT_RUNOUT_SENSOR) #if ENABLED(FILAMENT_RUNOUT_SENSOR)
// NOTE: ExtUI::getFilamentRunoutState() only returns the runout state if the job is printing // NOTE: getFilamentRunoutState() only returns the runout state if the job is printing
// we want to actually check the status of the pin here, regardless of printstate // we want to actually check the status of the pin here, regardless of printstate
if (READ(FIL_RUNOUT1_PIN)) { if (READ(FIL_RUNOUT1_PIN)) {
if (mediaPrintingState == AMPRINTSTATE_PRINTING || mediaPrintingState == AMPRINTSTATE_PAUSED || mediaPrintingState == AMPRINTSTATE_PAUSE_REQUESTED) { if (mediaPrintingState == AMPRINTSTATE_PRINTING || mediaPrintingState == AMPRINTSTATE_PAUSED || mediaPrintingState == AMPRINTSTATE_PAUSE_REQUESTED) {
// play tone to indicate filament is out // play tone to indicate filament is out
ExtUI::injectCommands_P(PSTR("\nM300 P200 S1567\nM300 P200 S1174\nM300 P200 S1567\nM300 P200 S1174\nM300 P2000 S1567")); injectCommands_P(PSTR("\nM300 P200 S1567\nM300 P200 S1174\nM300 P200 S1567\nM300 P200 S1174\nM300 P2000 S1567"));
// tell the user that the filament has run out and wait // tell the user that the filament has run out and wait
SENDLINE_DBG_PGM("J23", "TFT Serial Debug: Blocking filament prompt... J23"); SENDLINE_DBG_PGM("J23", "TFT Serial Debug: Blocking filament prompt... J23");
@ -944,30 +946,30 @@ void AnycubicTFTClass::DoFilamentRunoutCheck() {
void AnycubicTFTClass::StartPrint() { void AnycubicTFTClass::StartPrint() {
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
if (!ExtUI::isPrinting() && strlen(SelectedFile) > 0) { if (!isPrinting() && strlen(SelectedFile) > 0) {
#if ENABLED(ANYCUBIC_LCD_DEBUG) #if ENABLED(ANYCUBIC_LCD_DEBUG)
SERIAL_ECHOPGM("TFT Serial Debug: About to print file ... "); SERIAL_ECHOPGM("TFT Serial Debug: About to print file ... ");
SERIAL_ECHO(ExtUI::isPrinting()); SERIAL_ECHO(isPrinting());
SERIAL_ECHOPGM(" "); SERIAL_ECHOPGM(" ");
SERIAL_ECHOLN(SelectedFile); SERIAL_ECHOLN(SelectedFile);
#endif #endif
mediaPrintingState = AMPRINTSTATE_PRINTING; mediaPrintingState = AMPRINTSTATE_PRINTING;
mediaPauseState = AMPAUSESTATE_NOT_PAUSED; mediaPauseState = AMPAUSESTATE_NOT_PAUSED;
ExtUI::printFile(SelectedFile); printFile(SelectedFile);
} }
#endif // SDUPPORT #endif // SDUPPORT
} }
void AnycubicTFTClass::PausePrint() { void AnycubicTFTClass::PausePrint() {
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
if (ExtUI::isPrintingFromMedia() && mediaPrintingState != AMPRINTSTATE_STOP_REQUESTED && mediaPauseState == AMPAUSESTATE_NOT_PAUSED) { if (isPrintingFromMedia() && mediaPrintingState != AMPRINTSTATE_STOP_REQUESTED && mediaPauseState == AMPAUSESTATE_NOT_PAUSED) {
mediaPrintingState = AMPRINTSTATE_PAUSE_REQUESTED; mediaPrintingState = AMPRINTSTATE_PAUSE_REQUESTED;
mediaPauseState = AMPAUSESTATE_NOT_PAUSED; // need the userconfirm method to update pause state mediaPauseState = AMPAUSESTATE_NOT_PAUSED; // need the userconfirm method to update pause state
SENDLINE_DBG_PGM("J05", "TFT Serial Debug: SD print pause started... J05"); // J05 printing pause SENDLINE_DBG_PGM("J05", "TFT Serial Debug: SD print pause started... J05"); // J05 printing pause
// for some reason pausing the print doesn't retract the extruder so force a manual one here // for some reason pausing the print doesn't retract the extruder so force a manual one here
ExtUI::injectCommands_P(PSTR("G91\nG1 E-2 F1800\nG90")); injectCommands_P(PSTR("G91\nG1 E-2 F1800\nG90"));
ExtUI::pausePrint(); pausePrint();
} }
#endif #endif
} }
@ -996,14 +998,14 @@ void AnycubicTFTClass::ResumePrint() {
// SENDLINE_DBG_PGM("J05", "TFT Serial Debug: Resume called with heater timeout... J05"); // J05 printing pause // SENDLINE_DBG_PGM("J05", "TFT Serial Debug: Resume called with heater timeout... J05"); // J05 printing pause
// reheat the nozzle // reheat the nozzle
ExtUI::setUserConfirmed(); setUserConfirmed();
} }
else { else {
mediaPrintingState = AMPRINTSTATE_PRINTING; mediaPrintingState = AMPRINTSTATE_PRINTING;
mediaPauseState = AMPAUSESTATE_NOT_PAUSED; mediaPauseState = AMPAUSESTATE_NOT_PAUSED;
SENDLINE_DBG_PGM("J04", "TFT Serial Debug: SD print resumed... J04"); // J04 printing form sd card now SENDLINE_DBG_PGM("J04", "TFT Serial Debug: SD print resumed... J04"); // J04 printing form sd card now
ExtUI::resumePrint(); resumePrint();
} }
#endif #endif
} }
@ -1015,8 +1017,8 @@ void AnycubicTFTClass::StopPrint() {
SENDLINE_DBG_PGM("J16", "TFT Serial Debug: SD print stop called... J16"); SENDLINE_DBG_PGM("J16", "TFT Serial Debug: SD print stop called... J16");
// for some reason stopping the print doesn't retract the extruder so force a manual one here // for some reason stopping the print doesn't retract the extruder so force a manual one here
ExtUI::injectCommands_P(PSTR("G91\nG1 E-2 F1800\nG90")); injectCommands_P(PSTR("G91\nG1 E-2 F1800\nG90"));
ExtUI::stopPrint(); stopPrint();
#endif #endif
} }

78
Marlin/src/lcd/extui/lib/anycubic_i3mega/anycubic_i3mega_lcd.h
View File

@ -2,7 +2,7 @@
* anycubic_i3mega_lcd.h --- Support for Anycubic i3 Mega TFT * anycubic_i3mega_lcd.h --- Support for Anycubic i3 Mega TFT
* Created by Christian Hopp on 09.12.17. * Created by Christian Hopp on 09.12.17.
* Improved by David Ramiro * Improved by David Ramiro
* Converted to ext_iu by John BouAntoun 21 June 2020 * Converted to ExtUI by John BouAntoun 21 June 2020
* *
* This library is free software; you can redistribute it and/or * This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public * modify it under the terms of the GNU Lesser General Public
@ -48,49 +48,47 @@ enum AnycubicMediaPauseState {
class AnycubicTFTClass { class AnycubicTFTClass {
public: public:
AnycubicTFTClass(); AnycubicTFTClass();
void OnSetup(); static void OnSetup();
void OnCommandScan(); static void OnCommandScan();
void OnKillTFT(); static void OnKillTFT();
void OnSDCardStateChange(bool); static void OnSDCardStateChange(bool);
void OnSDCardError(); static void OnSDCardError();
void OnFilamentRunout(); static void OnFilamentRunout();
void OnUserConfirmRequired(const char *); static void OnUserConfirmRequired(const char *);
void OnPrintTimerStarted(); static void OnPrintTimerStarted();
void OnPrintTimerPaused(); static void OnPrintTimerPaused();
void OnPrintTimerStopped(); static void OnPrintTimerStopped();
private: private:
char TFTcmdbuffer[TFTBUFSIZE][TFT_MAX_CMD_SIZE]; static char TFTcmdbuffer[TFTBUFSIZE][TFT_MAX_CMD_SIZE];
int TFTbuflen=0; static int TFTbuflen, TFTbufindr, TFTbufindw;
int TFTbufindr = 0; static char serial3_char;
int TFTbufindw = 0; static int serial3_count;
char serial3_char; static char *TFTstrchr_pointer;
int serial3_count = 0; static uint8_t SpecialMenu;
char *TFTstrchr_pointer; static AnycubicMediaPrintState mediaPrintingState;
uint8_t SpecialMenu = false; static AnycubicMediaPauseState mediaPauseState;
AnycubicMediaPrintState mediaPrintingState = AMPRINTSTATE_NOT_PRINTING;
AnycubicMediaPauseState mediaPauseState = AMPAUSESTATE_NOT_PAUSED;
float CodeValue(); static float CodeValue();
bool CodeSeen(char); static bool CodeSeen(char);
bool IsNozzleHomed(); static bool IsNozzleHomed();
void RenderCurrentFileList(); static void RenderCurrentFileList();
void RenderSpecialMenu(uint16_t); static void RenderSpecialMenu(uint16_t);
void RenderCurrentFolder(uint16_t); static void RenderCurrentFolder(uint16_t);
void GetCommandFromTFT(); static void GetCommandFromTFT();
void CheckSDCardChange(); static void CheckSDCardChange();
void CheckPauseState(); static void CheckPauseState();
void CheckPrintCompletion(); static void CheckPrintCompletion();
void HandleSpecialMenu(); static void HandleSpecialMenu();
void DoSDCardStateCheck(); static void DoSDCardStateCheck();
void DoFilamentRunoutCheck(); static void DoFilamentRunoutCheck();
void StartPrint(); static void StartPrint();
void PausePrint(); static void PausePrint();
void ResumePrint(); static void ResumePrint();
void StopPrint(); static void StopPrint();
char SelectedDirectory[30]; static char SelectedDirectory[30];
char SelectedFile[FILENAME_LENGTH]; static char SelectedFile[FILENAME_LENGTH];
}; };
extern AnycubicTFTClass AnycubicTFT; extern AnycubicTFTClass AnycubicTFT;

2
Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/marlin_events.cpp
View File

@ -140,7 +140,7 @@ namespace ExtUI {
#if HAS_LEVELING && HAS_MESH #if HAS_LEVELING && HAS_MESH
void onMeshLevelingStart() {} void onMeshLevelingStart() {}
void onMeshUpdate(const int8_t x, const int8_t y, const float val) { void onMeshUpdate(const int8_t x, const int8_t y, const float &val) {
BedMeshScreen::onMeshUpdate(x, y, val); BedMeshScreen::onMeshUpdate(x, y, val);
} }

2
Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bed_mesh_screen.h
View File

@ -51,7 +51,7 @@ class BedMeshScreen : public BaseScreen, public CachedScreen<BED_MESH_SCREEN_CAC
static void drawMesh(int16_t x, int16_t y, int16_t w, int16_t h, ExtUI::bed_mesh_t data, uint8_t opts, float autoscale_max = 0.1); static void drawMesh(int16_t x, int16_t y, int16_t w, int16_t h, ExtUI::bed_mesh_t data, uint8_t opts, float autoscale_max = 0.1);
public: public:
static void onMeshUpdate(const int8_t x, const int8_t y, const float val); static void onMeshUpdate(const int8_t x, const int8_t y, const float &val);
static void onMeshUpdate(const int8_t x, const int8_t y, const ExtUI::probe_state_t); static void onMeshUpdate(const int8_t x, const int8_t y, const ExtUI::probe_state_t);
static void onEntry(); static void onEntry();
static void onRedraw(draw_mode_t); static void onRedraw(draw_mode_t);

4
Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/stress_test_screen.cpp
View File

@ -97,9 +97,7 @@ void StressTestScreen::onEntry() {
mydata.message = PSTR("Test 1: Stress testing..."); mydata.message = PSTR("Test 1: Stress testing...");
// Turn off heaters. // Turn off heaters.
setTargetTemp_celsius(0, E0); coolDown();
setTargetTemp_celsius(0, E1);
setTargetTemp_celsius(0, BED);
runTestOnBootup(true); runTestOnBootup(true);
} }

7
Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/temperature_screen.cpp
View File

@ -101,13 +101,8 @@ bool TemperatureScreen::onTouchHeld(uint8_t tag) {
case 11: UI_INCREMENT(TargetFan_percent, FAN0); break; case 11: UI_INCREMENT(TargetFan_percent, FAN0); break;
#endif #endif
case 30: case 30:
#define _HOTEND_OFF(N) setTargetTemp_celsius(0, E##N); coolDown();
REPEAT(HOTENDS, _HOTEND_OFF);
TERN_(HAS_HEATED_BED, setTargetTemp_celsius(0, BED));
TERN_(HAS_HEATED_CHAMBER, setTargetTemp_celsius(0, CHAMBER)); TERN_(HAS_HEATED_CHAMBER, setTargetTemp_celsius(0, CHAMBER));
#if HAS_FAN
setTargetFan_percent(0, FAN0);
#endif
break; break;
default: default:
return false; return false;

2
Marlin/src/lcd/extui/malyan_lcd.cpp
View File

@ -528,7 +528,7 @@ namespace ExtUI {
#if HAS_MESH #if HAS_MESH
void onMeshLevelingStart() {} void onMeshLevelingStart() {}
void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float zval) {} void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float &zval) {}
void onMeshUpdate(const int8_t xpos, const int8_t ypos, const ExtUI::probe_state_t state) {} void onMeshUpdate(const int8_t xpos, const int8_t ypos, const ExtUI::probe_state_t state) {}
#endif #endif

135
Marlin/src/lcd/extui/ui_api.cpp
View File

@ -305,7 +305,7 @@ namespace ExtUI {
return epos; return epos;
} }
void setAxisPosition_mm(const float position, const axis_t axis, const feedRate_t feedrate/*=0*/) { void setAxisPosition_mm(const float &position, const axis_t axis, const feedRate_t feedrate/*=0*/) {
// Get motion limit from software endstops, if any // Get motion limit from software endstops, if any
float min, max; float min, max;
soft_endstop.get_manual_axis_limits((AxisEnum)axis, min, max); soft_endstop.get_manual_axis_limits((AxisEnum)axis, min, max);
@ -323,7 +323,7 @@ namespace ExtUI {
line_to_current_position(feedrate ?: manual_feedrate_mm_s[axis]); line_to_current_position(feedrate ?: manual_feedrate_mm_s[axis]);
} }
void setAxisPosition_mm(const float position, const extruder_t extruder, const feedRate_t feedrate/*=0*/) { void setAxisPosition_mm(const float &position, const extruder_t extruder, const feedRate_t feedrate/*=0*/) {
setActiveTool(extruder, true); setActiveTool(extruder, true);
current_position.e = position; current_position.e = position;
@ -435,7 +435,7 @@ namespace ExtUI {
}; };
} }
void setAxisCurrent_mA(const float mA, const axis_t axis) { void setAxisCurrent_mA(const float &mA, const axis_t axis) {
switch (axis) { switch (axis) {
#if AXIS_IS_TMC(X) #if AXIS_IS_TMC(X)
case X: stepperX.rms_current(constrain(mA, 400, 1500)); break; case X: stepperX.rms_current(constrain(mA, 400, 1500)); break;
@ -459,7 +459,7 @@ namespace ExtUI {
}; };
} }
void setAxisCurrent_mA(const float mA, const extruder_t extruder) { void setAxisCurrent_mA(const float &mA, const extruder_t extruder) {
switch (extruder) { switch (extruder) {
#if AXIS_IS_TMC(E0) #if AXIS_IS_TMC(E0)
case E0: stepperE0.rms_current(constrain(mA, 400, 1500)); break; case E0: stepperE0.rms_current(constrain(mA, 400, 1500)); break;
@ -503,7 +503,7 @@ namespace ExtUI {
} }
} }
void setTMCBumpSensitivity(const float value, const axis_t axis) { void setTMCBumpSensitivity(const float &value, const axis_t axis) {
switch (axis) { switch (axis) {
#if X_SENSORLESS || Y_SENSORLESS || Z_SENSORLESS #if X_SENSORLESS || Y_SENSORLESS || Z_SENSORLESS
#if X_SENSORLESS #if X_SENSORLESS
@ -547,12 +547,12 @@ namespace ExtUI {
return planner.settings.axis_steps_per_mm[E_AXIS_N(extruder - E0)]; return planner.settings.axis_steps_per_mm[E_AXIS_N(extruder - E0)];
} }
void setAxisSteps_per_mm(const float value, const axis_t axis) { void setAxisSteps_per_mm(const float &value, const axis_t axis) {
planner.settings.axis_steps_per_mm[axis] = value; planner.settings.axis_steps_per_mm[axis] = value;
planner.refresh_positioning(); planner.refresh_positioning();
} }
void setAxisSteps_per_mm(const float value, const extruder_t extruder) { void setAxisSteps_per_mm(const float &value, const extruder_t extruder) {
UNUSED_E(extruder); UNUSED_E(extruder);
planner.settings.axis_steps_per_mm[E_AXIS_N(extruder - E0)] = value; planner.settings.axis_steps_per_mm[E_AXIS_N(extruder - E0)] = value;
planner.refresh_positioning(); planner.refresh_positioning();
@ -585,12 +585,12 @@ namespace ExtUI {
return planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(extruder - E0)]; return planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(extruder - E0)];
} }
void setAxisMaxAcceleration_mm_s2(const float value, const axis_t axis) { void setAxisMaxAcceleration_mm_s2(const float &value, const axis_t axis) {
planner.set_max_acceleration(axis, value); planner.set_max_acceleration(axis, value);
planner.reset_acceleration_rates(); planner.reset_acceleration_rates();
} }
void setAxisMaxAcceleration_mm_s2(const float value, const extruder_t extruder) { void setAxisMaxAcceleration_mm_s2(const float &value, const extruder_t extruder) {
UNUSED_E(extruder); UNUSED_E(extruder);
planner.set_max_acceleration(E_AXIS_N(extruder - E0), value); planner.set_max_acceleration(E_AXIS_N(extruder - E0), value);
planner.reset_acceleration_rates(); planner.reset_acceleration_rates();
@ -604,7 +604,7 @@ namespace ExtUI {
#if HAS_FILAMENT_RUNOUT_DISTANCE #if HAS_FILAMENT_RUNOUT_DISTANCE
float getFilamentRunoutDistance_mm() { return runout.runout_distance(); } float getFilamentRunoutDistance_mm() { return runout.runout_distance(); }
void setFilamentRunoutDistance_mm(const float value) { runout.set_runout_distance(constrain(value, 0, 999)); } void setFilamentRunoutDistance_mm(const float &value) { runout.set_runout_distance(constrain(value, 0, 999)); }
#endif #endif
#endif #endif
@ -617,7 +617,7 @@ namespace ExtUI {
#if CASELIGHT_USES_BRIGHTNESS #if CASELIGHT_USES_BRIGHTNESS
float getCaseLightBrightness_percent() { return ui8_to_percent(caselight.brightness); } float getCaseLightBrightness_percent() { return ui8_to_percent(caselight.brightness); }
void setCaseLightBrightness_percent(const float value) { void setCaseLightBrightness_percent(const float &value) {
caselight.brightness = map(constrain(value, 0, 100), 0, 100, 0, 255); caselight.brightness = map(constrain(value, 0, 100), 0, 100, 0, 255);
caselight.update_brightness(); caselight.update_brightness();
} }
@ -629,7 +629,7 @@ namespace ExtUI {
return (extruder < EXTRUDERS) ? planner.extruder_advance_K[extruder - E0] : 0; return (extruder < EXTRUDERS) ? planner.extruder_advance_K[extruder - E0] : 0;
} }
void setLinearAdvance_mm_mm_s(const float value, const extruder_t extruder) { void setLinearAdvance_mm_mm_s(const float &value, const extruder_t extruder) {
if (extruder < EXTRUDERS) if (extruder < EXTRUDERS)
planner.extruder_advance_K[extruder - E0] = constrain(value, 0, 10); planner.extruder_advance_K[extruder - E0] = constrain(value, 0, 10);
} }
@ -641,28 +641,16 @@ namespace ExtUI {
return planner.junction_deviation_mm; return planner.junction_deviation_mm;
} }
void setJunctionDeviation_mm(const float value) { void setJunctionDeviation_mm(const float &value) {
planner.junction_deviation_mm = constrain(value, 0.001, 0.3); planner.junction_deviation_mm = constrain(value, 0.001, 0.3);
TERN_(LIN_ADVANCE, planner.recalculate_max_e_jerk()); TERN_(LIN_ADVANCE, planner.recalculate_max_e_jerk());
} }
#else #else
float getAxisMaxJerk_mm_s(const axis_t axis) { return planner.max_jerk[axis]; }
float getAxisMaxJerk_mm_s(const axis_t axis) { float getAxisMaxJerk_mm_s(const extruder_t) { return planner.max_jerk.e; }
return planner.max_jerk[axis]; void setAxisMaxJerk_mm_s(const float &value, const axis_t axis) { planner.set_max_jerk((AxisEnum)axis, value); }
} void setAxisMaxJerk_mm_s(const float &value, const extruder_t) { planner.set_max_jerk(E_AXIS, value); }
float getAxisMaxJerk_mm_s(const extruder_t) {
return planner.max_jerk.e;
}
void setAxisMaxJerk_mm_s(const float value, const axis_t axis) {
planner.set_max_jerk((AxisEnum)axis, value);
}
void setAxisMaxJerk_mm_s(const float value, const extruder_t) {
planner.set_max_jerk(E_AXIS, value);
}
#endif #endif
feedRate_t getFeedrate_mm_s() { return feedrate_mm_s; } feedRate_t getFeedrate_mm_s() { return feedrate_mm_s; }
@ -676,11 +664,12 @@ namespace ExtUI {
void setFlow_percent(const int16_t flow, const extruder_t extr) { planner.set_flow(extr, flow); } void setFlow_percent(const int16_t flow, const extruder_t extr) { planner.set_flow(extr, flow); }
void setMinFeedrate_mm_s(const feedRate_t fr) { planner.settings.min_feedrate_mm_s = fr; } void setMinFeedrate_mm_s(const feedRate_t fr) { planner.settings.min_feedrate_mm_s = fr; }
void setMinTravelFeedrate_mm_s(const feedRate_t fr) { planner.settings.min_travel_feedrate_mm_s = fr; } void setMinTravelFeedrate_mm_s(const feedRate_t fr) { planner.settings.min_travel_feedrate_mm_s = fr; }
void setPrintingAcceleration_mm_s2(const float acc) { planner.settings.acceleration = acc; } void setPrintingAcceleration_mm_s2(const float &acc) { planner.settings.acceleration = acc; }
void setRetractAcceleration_mm_s2(const float acc) { planner.settings.retract_acceleration = acc; } void setRetractAcceleration_mm_s2(const float &acc) { planner.settings.retract_acceleration = acc; }
void setTravelAcceleration_mm_s2(const float acc) { planner.settings.travel_acceleration = acc; } void setTravelAcceleration_mm_s2(const float &acc) { planner.settings.travel_acceleration = acc; }
#if ENABLED(BABYSTEPPING) #if ENABLED(BABYSTEPPING)
bool babystepAxis_steps(const int16_t steps, const axis_t axis) { bool babystepAxis_steps(const int16_t steps, const axis_t axis) {
switch (axis) { switch (axis) {
#if ENABLED(BABYSTEP_XY) #if ENABLED(BABYSTEP_XY)
@ -738,11 +727,12 @@ namespace ExtUI {
* Converts a mm displacement to a number of whole number of * Converts a mm displacement to a number of whole number of
* steps that is at least mm long. * steps that is at least mm long.
*/ */
int16_t mmToWholeSteps(const float mm, const axis_t axis) { int16_t mmToWholeSteps(const float &mm, const axis_t axis) {
const float steps = mm / planner.steps_to_mm[axis]; const float steps = mm / planner.steps_to_mm[axis];
return steps > 0 ? CEIL(steps) : FLOOR(steps); return steps > 0 ? CEIL(steps) : FLOOR(steps);
} }
#endif
#endif // BABYSTEPPING
float getZOffset_mm() { float getZOffset_mm() {
return (0.0f return (0.0f
@ -754,7 +744,7 @@ namespace ExtUI {
); );
} }
void setZOffset_mm(const float value) { void setZOffset_mm(const float &value) {
#if HAS_BED_PROBE #if HAS_BED_PROBE
if (WITHIN(value, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX)) if (WITHIN(value, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX))
probe.offset.z = value; probe.offset.z = value;
@ -772,7 +762,7 @@ namespace ExtUI {
return hotend_offset[extruder - E0][axis]; return hotend_offset[extruder - E0][axis];
} }
void setNozzleOffset_mm(const float value, const axis_t axis, const extruder_t extruder) { void setNozzleOffset_mm(const float &value, const axis_t axis, const extruder_t extruder) {
if (extruder - E0 >= HOTENDS) return; if (extruder - E0 >= HOTENDS) return;
hotend_offset[extruder - E0][axis] = value; hotend_offset[extruder - E0][axis] = value;
} }
@ -790,25 +780,21 @@ namespace ExtUI {
#endif // HAS_HOTEND_OFFSET #endif // HAS_HOTEND_OFFSET
#if HAS_BED_PROBE #if HAS_BED_PROBE
float getProbeOffset_mm(const axis_t axis) { float getProbeOffset_mm(const axis_t axis) { return probe.offset.pos[axis]; }
return probe.offset.pos[axis]; void setProbeOffset_mm(const float &val, const axis_t axis) { probe.offset.pos[axis] = val; }
}
void setProbeOffset_mm(const float val, const axis_t axis) {
probe.offset.pos[axis] = val;
}
#endif #endif
#if ENABLED(BACKLASH_GCODE) #if ENABLED(BACKLASH_GCODE)
float getAxisBacklash_mm(const axis_t axis) { return backlash.distance_mm[axis]; } float getAxisBacklash_mm(const axis_t axis) { return backlash.distance_mm[axis]; }
void setAxisBacklash_mm(const float value, const axis_t axis) void setAxisBacklash_mm(const float &value, const axis_t axis)
{ backlash.distance_mm[axis] = constrain(value,0,5); } { backlash.distance_mm[axis] = constrain(value,0,5); }
float getBacklashCorrection_percent() { return ui8_to_percent(backlash.correction); } float getBacklashCorrection_percent() { return ui8_to_percent(backlash.correction); }
void setBacklashCorrection_percent(const float value) { backlash.correction = map(constrain(value, 0, 100), 0, 100, 0, 255); } void setBacklashCorrection_percent(const float &value) { backlash.correction = map(constrain(value, 0, 100), 0, 100, 0, 255); }
#ifdef BACKLASH_SMOOTHING_MM #ifdef BACKLASH_SMOOTHING_MM
float getBacklashSmoothing_mm() { return backlash.smoothing_mm; } float getBacklashSmoothing_mm() { return backlash.smoothing_mm; }
void setBacklashSmoothing_mm(const float value) { backlash.smoothing_mm = constrain(value, 0, 999); } void setBacklashSmoothing_mm(const float &value) { backlash.smoothing_mm = constrain(value, 0, 999); }
#endif #endif
#endif #endif
@ -824,7 +810,7 @@ namespace ExtUI {
#if HAS_MESH #if HAS_MESH
bed_mesh_t& getMeshArray() { return Z_VALUES_ARR; } bed_mesh_t& getMeshArray() { return Z_VALUES_ARR; }
float getMeshPoint(const xy_uint8_t &pos) { return Z_VALUES(pos.x, pos.y); } float getMeshPoint(const xy_uint8_t &pos) { return Z_VALUES(pos.x, pos.y); }
void setMeshPoint(const xy_uint8_t &pos, const float zoff) { void setMeshPoint(const xy_uint8_t &pos, const float &zoff) {
if (WITHIN(pos.x, 0, GRID_MAX_POINTS_X) && WITHIN(pos.y, 0, GRID_MAX_POINTS_Y)) { if (WITHIN(pos.x, 0, GRID_MAX_POINTS_X) && WITHIN(pos.y, 0, GRID_MAX_POINTS_Y)) {
Z_VALUES(pos.x, pos.y) = zoff; Z_VALUES(pos.x, pos.y) = zoff;
TERN_(ABL_BILINEAR_SUBDIVISION, bed_level_virt_interpolate()); TERN_(ABL_BILINEAR_SUBDIVISION, bed_level_virt_interpolate());
@ -838,6 +824,7 @@ namespace ExtUI {
#endif #endif
#if ENABLED(PRINTCOUNTER) #if ENABLED(PRINTCOUNTER)
char* getFailedPrints_str(char buffer[21]) { strcpy(buffer,i16tostr3left(print_job_timer.getStats().totalPrints - print_job_timer.getStats().finishedPrints)); return buffer; }
char* getTotalPrints_str(char buffer[21]) { strcpy(buffer,i16tostr3left(print_job_timer.getStats().totalPrints)); return buffer; } char* getTotalPrints_str(char buffer[21]) { strcpy(buffer,i16tostr3left(print_job_timer.getStats().totalPrints)); return buffer; }
char* getFinishedPrints_str(char buffer[21]) { strcpy(buffer,i16tostr3left(print_job_timer.getStats().finishedPrints)); return buffer; } char* getFinishedPrints_str(char buffer[21]) { strcpy(buffer,i16tostr3left(print_job_timer.getStats().finishedPrints)); return buffer; }
char* getTotalPrintTime_str(char buffer[21]) { return duration_t(print_job_timer.getStats().printTime).toString(buffer); } char* getTotalPrintTime_str(char buffer[21]) { return duration_t(print_job_timer.getStats().printTime).toString(buffer); }
@ -856,14 +843,14 @@ namespace ExtUI {
float getPIDValues_Ki(const extruder_t tool) { return unscalePID_i(PID_PARAM(Ki, tool)); } float getPIDValues_Ki(const extruder_t tool) { return unscalePID_i(PID_PARAM(Ki, tool)); }
float getPIDValues_Kd(const extruder_t tool) { return unscalePID_d(PID_PARAM(Kd, tool)); } float getPIDValues_Kd(const extruder_t tool) { return unscalePID_d(PID_PARAM(Kd, tool)); }
void setPIDValues(const float p, const float i, const float d, extruder_t tool) { void setPIDValues(const float &p, const float &i, const float &d, extruder_t tool) {
thermalManager.temp_hotend[tool].pid.Kp = p; thermalManager.temp_hotend[tool].pid.Kp = p;
thermalManager.temp_hotend[tool].pid.Ki = scalePID_i(i); thermalManager.temp_hotend[tool].pid.Ki = scalePID_i(i);
thermalManager.temp_hotend[tool].pid.Kd = scalePID_d(d); thermalManager.temp_hotend[tool].pid.Kd = scalePID_d(d);
thermalManager.updatePID(); thermalManager.updatePID();
} }
void startPIDTune(const float temp, extruder_t tool) { void startPIDTune(const float &temp, extruder_t tool) {
thermalManager.PID_autotune(temp, (heater_id_t)tool, 8, true); thermalManager.PID_autotune(temp, (heater_id_t)tool, 8, true);
} }
#endif #endif
@ -873,14 +860,14 @@ namespace ExtUI {
float getBedPIDValues_Ki() { return unscalePID_i(thermalManager.temp_bed.pid.Ki); } float getBedPIDValues_Ki() { return unscalePID_i(thermalManager.temp_bed.pid.Ki); }
float getBedPIDValues_Kd() { return unscalePID_d(thermalManager.temp_bed.pid.Kd); } float getBedPIDValues_Kd() { return unscalePID_d(thermalManager.temp_bed.pid.Kd); }
void setBedPIDValues(const float p, const float i, const float d) { void setBedPIDValues(const float &p, const float &i, const float &d) {
thermalManager.temp_bed.pid.Kp = p; thermalManager.temp_bed.pid.Kp = p;
thermalManager.temp_bed.pid.Ki = scalePID_i(i); thermalManager.temp_bed.pid.Ki = scalePID_i(i);
thermalManager.temp_bed.pid.Kd = scalePID_d(d); thermalManager.temp_bed.pid.Kd = scalePID_d(d);
thermalManager.updatePID(); thermalManager.updatePID();
} }
void startBedPIDTune(const float temp) { void startBedPIDTune(const float &temp) {
thermalManager.PID_autotune(temp, H_BED, 4, true); thermalManager.PID_autotune(temp, H_BED, 4, true);
} }
#endif #endif
@ -900,7 +887,8 @@ namespace ExtUI {
return firmware_name; return firmware_name;
} }
void setTargetTemp_celsius(float value, const heater_t heater) { void setTargetTemp_celsius(const float &inval, const heater_t heater) {
float value = inval;
#ifdef TOUCH_UI_LCD_TEMP_SCALING #ifdef TOUCH_UI_LCD_TEMP_SCALING
value *= TOUCH_UI_LCD_TEMP_SCALING; value *= TOUCH_UI_LCD_TEMP_SCALING;
#endif #endif
@ -924,7 +912,8 @@ namespace ExtUI {
} }
} }
void setTargetTemp_celsius(float value, const extruder_t extruder) { void setTargetTemp_celsius(const float &inval, const extruder_t extruder) {
float value = inval;
#ifdef TOUCH_UI_LCD_TEMP_SCALING #ifdef TOUCH_UI_LCD_TEMP_SCALING
value *= TOUCH_UI_LCD_TEMP_SCALING; value *= TOUCH_UI_LCD_TEMP_SCALING;
#endif #endif
@ -935,7 +924,7 @@ namespace ExtUI {
#endif #endif
} }
void setTargetFan_percent(const float value, const fan_t fan) { void setTargetFan_percent(const float &value, const fan_t fan) {
#if HAS_FAN #if HAS_FAN
if (fan < FAN_COUNT) if (fan < FAN_COUNT)
thermalManager.set_fan_speed(fan - FAN0, map(constrain(value, 0, 100), 0, 100, 0, 255)); thermalManager.set_fan_speed(fan - FAN0, map(constrain(value, 0, 100), 0, 100, 0, 255));
@ -945,25 +934,27 @@ namespace ExtUI {
#endif #endif
} }
void setFeedrate_percent(const float value) { void setFeedrate_percent(const float &value) { feedrate_percentage = constrain(value, 10, 500); }
feedrate_percentage = constrain(value, 10, 500);
void coolDown() {
#if HAS_HOTEND
HOTEND_LOOP() thermalManager.setTargetHotend(0, e);
#endif
TERN_(HAS_HEATED_BED, thermalManager.setTargetBed(0));
TERN_(HAS_FAN, thermalManager.zero_fan_speeds());
} }
bool awaitingUserConfirm() { bool awaitingUserConfirm() { return wait_for_user; }
return wait_for_user;
}
void setUserConfirmed() { void setUserConfirmed() { TERN_(HAS_RESUME_CONTINUE, wait_for_user = false); }
TERN_(HAS_RESUME_CONTINUE, wait_for_user = false);
}
void printFile(const char *filename) { void printFile(const char *filename) {
UNUSED(filename); UNUSED(filename);
IFSD(card.openAndPrintFile(filename), NOOP); TERN_(SDSUPPORT, card.openAndPrintFile(filename));
} }
bool isPrintingFromMediaPaused() { bool isPrintingFromMediaPaused() {
return IFSD(isPrintingFromMedia() && !IS_SD_PRINTING(), false); return TERN0(SDSUPPORT, isPrintingFromMedia() && !IS_SD_PRINTING());
} }
bool isPrintingFromMedia() { bool isPrintingFromMedia() {
@ -978,16 +969,14 @@ namespace ExtUI {
} }
bool isPrinting() { bool isPrinting() {
return (commandsInQueue() || isPrintingFromMedia() || IFSD(IS_SD_PRINTING(), false)) || print_job_timer.isRunning() || print_job_timer.isPaused(); return (commandsInQueue() || isPrintingFromMedia() || TERN0(SDSUPPORT, IS_SD_PRINTING())) || print_job_timer.isRunning() || print_job_timer.isPaused();
} }
bool isPrintingPaused() { bool isPrintingPaused() {
return isPrinting() && (isPrintingFromMediaPaused() || print_job_timer.isPaused()); return isPrinting() && (isPrintingFromMediaPaused() || print_job_timer.isPaused());
} }
bool isMediaInserted() { bool isMediaInserted() { return TERN0(SDSUPPORT, IS_SD_INSERTED() && card.isMounted()); }
return IFSD(IS_SD_INSERTED() && card.isMounted(), false);
}
void pausePrint() { ui.pause_print(); } void pausePrint() { ui.pause_print(); }
void resumePrint() { ui.resume_print(); } void resumePrint() { ui.resume_print(); }
@ -1022,27 +1011,27 @@ namespace ExtUI {
} }
const char* FileList::filename() { const char* FileList::filename() {
return IFSD(card.longest_filename(), ""); return TERN(SDSUPPORT, card.longest_filename(), "");
} }
const char* FileList::shortFilename() { const char* FileList::shortFilename() {
return IFSD(card.filename, ""); return TERN(SDSUPPORT, card.filename, "");
} }
const char* FileList::longFilename() { const char* FileList::longFilename() {
return IFSD(card.longFilename, ""); return TERN(SDSUPPORT, card.longFilename, "");
} }
bool FileList::isDir() { bool FileList::isDir() {
return IFSD(card.flag.filenameIsDir, false); return TERN0(SDSUPPORT, card.flag.filenameIsDir);
} }
uint16_t FileList::count() { uint16_t FileList::count() {
return IFSD((num_files = (num_files == 0xFFFF ? card.get_num_Files() : num_files)), 0); return TERN0(SDSUPPORT, (num_files = (num_files == 0xFFFF ? card.get_num_Files() : num_files)));
} }
bool FileList::isAtRootDir() { bool FileList::isAtRootDir() {
return IFSD(card.flag.workDirIsRoot, true); return TERN1(SDSUPPORT, card.flag.workDirIsRoot);
} }
void FileList::upDir() { void FileList::upDir() {

73
Marlin/src/lcd/extui/ui_api.h
View File

@ -102,11 +102,11 @@ namespace ExtUI {
#if HAS_TRINAMIC_CONFIG #if HAS_TRINAMIC_CONFIG
float getAxisCurrent_mA(const axis_t); float getAxisCurrent_mA(const axis_t);
float getAxisCurrent_mA(const extruder_t); float getAxisCurrent_mA(const extruder_t);
void setAxisCurrent_mA(const float, const axis_t); void setAxisCurrent_mA(const float&, const axis_t);
void setAxisCurrent_mA(const float, const extruder_t); void setAxisCurrent_mA(const float&, const extruder_t);
int getTMCBumpSensitivity(const axis_t); int getTMCBumpSensitivity(const axis_t);
void setTMCBumpSensitivity(const float, const axis_t); void setTMCBumpSensitivity(const float&, const axis_t);
#endif #endif
float getActualTemp_celsius(const heater_t); float getActualTemp_celsius(const heater_t);
@ -150,10 +150,10 @@ namespace ExtUI {
#if HAS_MESH #if HAS_MESH
bed_mesh_t& getMeshArray(); bed_mesh_t& getMeshArray();
float getMeshPoint(const xy_uint8_t &pos); float getMeshPoint(const xy_uint8_t &pos);
void setMeshPoint(const xy_uint8_t &pos, const float zval); void setMeshPoint(const xy_uint8_t &pos, const float &zval);
void onMeshLevelingStart(); void onMeshLevelingStart();
void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float zval); void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float &zval);
inline void onMeshUpdate(const xy_int8_t &pos, const float zval) { onMeshUpdate(pos.x, pos.y, zval); } inline void onMeshUpdate(const xy_int8_t &pos, const float &zval) { onMeshUpdate(pos.x, pos.y, zval); }
typedef enum : uint8_t { typedef enum : uint8_t {
MESH_START, // Prior to start of probe MESH_START, // Prior to start of probe
@ -178,41 +178,42 @@ namespace ExtUI {
char* getFilamentUsed_str(char buffer[21]); char* getFilamentUsed_str(char buffer[21]);
#endif #endif
void setTargetTemp_celsius(const float, const heater_t); void setTargetTemp_celsius(const float&, const heater_t);
void setTargetTemp_celsius(const float, const extruder_t); void setTargetTemp_celsius(const float&, const extruder_t);
void setTargetFan_percent(const float, const fan_t); void setTargetFan_percent(const float&, const fan_t);
void setAxisPosition_mm(const float, const axis_t, const feedRate_t=0); void coolDown();
void setAxisPosition_mm(const float, const extruder_t, const feedRate_t=0); void setAxisPosition_mm(const float&, const axis_t, const feedRate_t=0);
void setAxisSteps_per_mm(const float, const axis_t); void setAxisPosition_mm(const float&, const extruder_t, const feedRate_t=0);
void setAxisSteps_per_mm(const float, const extruder_t); void setAxisSteps_per_mm(const float&, const axis_t);
void setAxisSteps_per_mm(const float&, const extruder_t);
void setAxisMaxFeedrate_mm_s(const feedRate_t, const axis_t); void setAxisMaxFeedrate_mm_s(const feedRate_t, const axis_t);
void setAxisMaxFeedrate_mm_s(const feedRate_t, const extruder_t); void setAxisMaxFeedrate_mm_s(const feedRate_t, const extruder_t);
void setAxisMaxAcceleration_mm_s2(const float, const axis_t); void setAxisMaxAcceleration_mm_s2(const float&, const axis_t);
void setAxisMaxAcceleration_mm_s2(const float, const extruder_t); void setAxisMaxAcceleration_mm_s2(const float&, const extruder_t);
void setFeedrate_mm_s(const feedRate_t); void setFeedrate_mm_s(const feedRate_t);
void setMinFeedrate_mm_s(const feedRate_t); void setMinFeedrate_mm_s(const feedRate_t);
void setMinTravelFeedrate_mm_s(const feedRate_t); void setMinTravelFeedrate_mm_s(const feedRate_t);
void setPrintingAcceleration_mm_s2(const float); void setPrintingAcceleration_mm_s2(const float&);
void setRetractAcceleration_mm_s2(const float); void setRetractAcceleration_mm_s2(const float&);
void setTravelAcceleration_mm_s2(const float); void setTravelAcceleration_mm_s2(const float&);
void setFeedrate_percent(const float); void setFeedrate_percent(const float&);
void setFlow_percent(const int16_t, const extruder_t); void setFlow_percent(const int16_t, const extruder_t);
bool awaitingUserConfirm(); bool awaitingUserConfirm();
void setUserConfirmed(); void setUserConfirmed();
#if ENABLED(LIN_ADVANCE) #if ENABLED(LIN_ADVANCE)
float getLinearAdvance_mm_mm_s(const extruder_t); float getLinearAdvance_mm_mm_s(const extruder_t);
void setLinearAdvance_mm_mm_s(const float, const extruder_t); void setLinearAdvance_mm_mm_s(const float&, const extruder_t);
#endif #endif
#if HAS_JUNCTION_DEVIATION #if HAS_JUNCTION_DEVIATION
float getJunctionDeviation_mm(); float getJunctionDeviation_mm();
void setJunctionDeviation_mm(const float); void setJunctionDeviation_mm(const float&);
#else #else
float getAxisMaxJerk_mm_s(const axis_t); float getAxisMaxJerk_mm_s(const axis_t);
float getAxisMaxJerk_mm_s(const extruder_t); float getAxisMaxJerk_mm_s(const extruder_t);
void setAxisMaxJerk_mm_s(const float, const axis_t); void setAxisMaxJerk_mm_s(const float&, const axis_t);
void setAxisMaxJerk_mm_s(const float, const extruder_t); void setAxisMaxJerk_mm_s(const float&, const extruder_t);
#endif #endif
extruder_t getTool(const uint8_t extruder); extruder_t getTool(const uint8_t extruder);
@ -220,7 +221,7 @@ namespace ExtUI {
void setActiveTool(const extruder_t, bool no_move); void setActiveTool(const extruder_t, bool no_move);
#if ENABLED(BABYSTEPPING) #if ENABLED(BABYSTEPPING)
int16_t mmToWholeSteps(const float mm, const axis_t axis); int16_t mmToWholeSteps(const float& mm, const axis_t axis);
bool babystepAxis_steps(const int16_t steps, const axis_t axis); bool babystepAxis_steps(const int16_t steps, const axis_t axis);
void smartAdjustAxis_steps(const int16_t steps, const axis_t axis, bool linked_nozzles); void smartAdjustAxis_steps(const int16_t steps, const axis_t axis, bool linked_nozzles);
@ -228,28 +229,28 @@ namespace ExtUI {
#if HAS_HOTEND_OFFSET #if HAS_HOTEND_OFFSET
float getNozzleOffset_mm(const axis_t, const extruder_t); float getNozzleOffset_mm(const axis_t, const extruder_t);
void setNozzleOffset_mm(const float, const axis_t, const extruder_t); void setNozzleOffset_mm(const float&, const axis_t, const extruder_t);
void normalizeNozzleOffset(const axis_t axis); void normalizeNozzleOffset(const axis_t axis);
#endif #endif
float getZOffset_mm(); float getZOffset_mm();
void setZOffset_mm(const float); void setZOffset_mm(const float&);
#if HAS_BED_PROBE #if HAS_BED_PROBE
float getProbeOffset_mm(const axis_t); float getProbeOffset_mm(const axis_t);
void setProbeOffset_mm(const float, const axis_t); void setProbeOffset_mm(const float&, const axis_t);
#endif #endif
#if ENABLED(BACKLASH_GCODE) #if ENABLED(BACKLASH_GCODE)
float getAxisBacklash_mm(const axis_t); float getAxisBacklash_mm(const axis_t);
void setAxisBacklash_mm(const float, const axis_t); void setAxisBacklash_mm(const float&, const axis_t);
float getBacklashCorrection_percent(); float getBacklashCorrection_percent();
void setBacklashCorrection_percent(const float); void setBacklashCorrection_percent(const float&);
#ifdef BACKLASH_SMOOTHING_MM #ifdef BACKLASH_SMOOTHING_MM
float getBacklashSmoothing_mm(); float getBacklashSmoothing_mm();
void setBacklashSmoothing_mm(const float); void setBacklashSmoothing_mm(const float&);
#endif #endif
#endif #endif
@ -261,7 +262,7 @@ namespace ExtUI {
#if HAS_FILAMENT_RUNOUT_DISTANCE #if HAS_FILAMENT_RUNOUT_DISTANCE
float getFilamentRunoutDistance_mm(); float getFilamentRunoutDistance_mm();
void setFilamentRunoutDistance_mm(const float); void setFilamentRunoutDistance_mm(const float&);
#endif #endif
#endif #endif
@ -271,7 +272,7 @@ namespace ExtUI {
#if DISABLED(CASE_LIGHT_NO_BRIGHTNESS) #if DISABLED(CASE_LIGHT_NO_BRIGHTNESS)
float getCaseLightBrightness_percent(); float getCaseLightBrightness_percent();
void setCaseLightBrightness_percent(const float); void setCaseLightBrightness_percent(const float&);
#endif #endif
#endif #endif
@ -279,16 +280,16 @@ namespace ExtUI {
float getPIDValues_Kp(const extruder_t); float getPIDValues_Kp(const extruder_t);
float getPIDValues_Ki(const extruder_t); float getPIDValues_Ki(const extruder_t);
float getPIDValues_Kd(const extruder_t); float getPIDValues_Kd(const extruder_t);
void setPIDValues(const float, const float, const float, extruder_t); void setPIDValues(const float&, const float&, const float&, extruder_t);
void startPIDTune(const float, extruder_t); void startPIDTune(const float&, extruder_t);
#endif #endif
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)
float getBedPIDValues_Kp(); float getBedPIDValues_Kp();
float getBedPIDValues_Ki(); float getBedPIDValues_Ki();
float getBedPIDValues_Kd(); float getBedPIDValues_Kd();
void setBedPIDValues(const float, const float, const float); void setBedPIDValues(const float&, const float&, const float&);
void startBedPIDTune(const float); void startBedPIDTune(const float&);
#endif #endif
/** /**

2
Marlin/src/sd/cardreader.h
View File

@ -23,8 +23,6 @@
#include "../inc/MarlinConfig.h" #include "../inc/MarlinConfig.h"
#define IFSD(A,B) TERN(SDSUPPORT,A,B)
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
extern const char M23_STR[], M24_STR[]; extern const char M23_STR[], M24_STR[];