Add 4 new LCD displays

Marlin/src/inc/Conditionals_LCD.h

@@ -40,17 +40,8 @@
 
   #elif ENABLED(MAKRPANEL)
 
-    #define DOGLCD
-    #define ULTIPANEL
-    #define DEFAULT_LCD_CONTRAST 17
     #define U8GLIB_ST7565_64128N
 
-  #elif ENABLED(MINIPANEL)
-
-    #define DOGLCD
-    #define ULTIPANEL
-    #define DEFAULT_LCD_CONTRAST 17
-
   #elif ENABLED(ANET_KEYPAD_LCD)
 
     #define REPRAPWORLD_KEYPAD
@@ -116,6 +107,34 @@
     #define U8GLIB_ST7920
     #define ULTIPANEL
 
+  #elif ENABLED(CR10_STOCKDISPLAY)
+
+    #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+    #ifndef ST7920_DELAY_1
+      #define ST7920_DELAY_1 DELAY_2_NOP
+    #endif
+    #ifndef ST7920_DELAY_2
+      #define ST7920_DELAY_2 DELAY_2_NOP
+    #endif
+    #ifndef ST7920_DELAY_3
+      #define ST7920_DELAY_3 DELAY_2_NOP
+    #endif
+
+  #elif ENABLED(MKS_12864OLED)
+
+    #define REPRAP_DISCOUNT_SMART_CONTROLLER
+    #define U8GLIB_SH1106
+
+  #elif ENABLED(MKS_MINI_12864)
+
+    #define MINIPANEL
+
+  #endif
+
+  #if ENABLED(MAKRPANEL) || ENABLED(MINIPANEL)
+    #define DOGLCD
+    #define ULTIPANEL
+    #define DEFAULT_LCD_CONTRAST 17
   #endif
 
   // Generic support for SSD1306 / SH1106 OLED based LCDs.
@@ -125,7 +144,15 @@
   #endif
 
   #if ENABLED(PANEL_ONE) || ENABLED(U8GLIB_SH1106)
+
     #define ULTIMAKERCONTROLLER
+
+  #elif ENABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602)
+
+    #define REPRAP_DISCOUNT_SMART_CONTROLLER
+    #define LCD_WIDTH 16
+    #define LCD_HEIGHT 2
+
   #endif
 
   #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) || ENABLED(LCD_FOR_MELZI)
@@ -249,14 +276,12 @@
     #ifndef LCD_HEIGHT
       #define LCD_HEIGHT 4
     #endif
-  #else // no panel but just LCD
-    #if ENABLED(ULTRA_LCD)
-      #ifndef LCD_WIDTH
-        #define LCD_WIDTH 16
-      #endif
-      #ifndef LCD_HEIGHT
-        #define LCD_HEIGHT 2
-      #endif
+  #elif ENABLED(ULTRA_LCD)  // no panel but just LCD
+    #ifndef LCD_WIDTH
+      #define LCD_WIDTH 16
+    #endif
+    #ifndef LCD_HEIGHT
+      #define LCD_HEIGHT 2
     #endif
   #endif
 

Marlin/src/inc/SanityCheck.h

@@ -1137,6 +1137,7 @@ static_assert(1 >= 0
  * Note: BQ_LCD_SMART_CONTROLLER => REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
  *       REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER => REPRAP_DISCOUNT_SMART_CONTROLLER
  *       SAV_3DGLCD => U8GLIB_SH1106 => ULTIMAKERCONTROLLER
+ *       MKS_12864OLED => U8GLIB_SH1106 => ULTIMAKERCONTROLLER
  *       miniVIKI => ULTIMAKERCONTROLLER
  *       VIKI2 => ULTIMAKERCONTROLLER
  *       ELB_FULL_GRAPHIC_CONTROLLER => ULTIMAKERCONTROLLER
@@ -1144,19 +1145,34 @@ static_assert(1 >= 0
  */
 static_assert(1 >= 0
   #if ENABLED(ULTIMAKERCONTROLLER) \
-      && DISABLED(SAV_3DGLCD) && DISABLED(miniVIKI) && DISABLED(VIKI2) \
-      && DISABLED(ELB_FULL_GRAPHIC_CONTROLLER) && DISABLED(PANEL_ONE)
+      && DISABLED(SAV_3DGLCD) \
+      && DISABLED(miniVIKI) \
+      && DISABLED(VIKI2) \
+      && DISABLED(ELB_FULL_GRAPHIC_CONTROLLER) \
+      && DISABLED(PANEL_ONE) \
+      && DISABLED(MKS_12864OLED)
     + 1
   #endif
-  #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) && DISABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && DISABLED(LCD_FOR_MELZI)
+  #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) \
+      && DISABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) \
+      && DISABLED(LCD_FOR_MELZI) \
+      && DISABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602) \
+      && DISABLED(MKS_12864OLED)
     + 1
   #endif
-  #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && DISABLED(BQ_LCD_SMART_CONTROLLER)
+  #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) \
+      && DISABLED(BQ_LCD_SMART_CONTROLLER)
     + 1
   #endif
   #if ENABLED(LCD_FOR_MELZI)
     + 1
   #endif
+  #if ENABLED(MKS_12864OLED)
+    + 1
+  #endif
+  #if ENABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602)
+    + 1
+  #endif
   #if ENABLED(CARTESIO_UI)
     + 1
   #endif
@@ -1181,10 +1197,15 @@ static_assert(1 >= 0
   #if ENABLED(G3D_PANEL)
     + 1
   #endif
-  #if ENABLED(MINIPANEL)
+  #if ENABLED(MINIPANEL) && DISABLED(MKS_MINI_12864)
     + 1
   #endif
-  #if ENABLED(REPRAPWORLD_KEYPAD) && DISABLED(CARTESIO_UI) && DISABLED(ANET_KEYPAD_LCD)
+  #if ENABLED(MKS_MINI_12864)
+    + 1
+  #endif
+  #if ENABLED(REPRAPWORLD_KEYPAD) \
+      && DISABLED(CARTESIO_UI) \
+      && DISABLED(ANET_KEYPAD_LCD)
     + 1
   #endif
   #if ENABLED(RIGIDBOT_PANEL)
@@ -1286,6 +1307,16 @@ static_assert(1 >= 0
   #error "HAVE_L6470DRIVER requires at least one L6470 stepper to be set."
 #endif
 
+/**
+ * Digipot requirement
+ */
+#if ENABLED(DIGIPOT_MCP4018)
+  #if !defined(DIGIPOTS_I2C_SDA_X) || !defined(DIGIPOTS_I2C_SDA_Y) || !defined(DIGIPOTS_I2C_SDA_Z) \
+    || !defined(DIGIPOTS_I2C_SDA_E0) || !defined(DIGIPOTS_I2C_SDA_E1)
+      #error "DIGIPOT_MCP4018 requires DIGIPOTS_I2C_SDA_* pins to be defined."
+  #endif
+#endif
+
 /**
  * Require 4 or more elements in per-axis initializers
  */