diff --git a/Marlin/src/HAL/HAL.h b/Marlin/src/HAL/HAL.h
index 37d5590a11..ab4f2d2dfc 100644
--- a/Marlin/src/HAL/HAL.h
+++ b/Marlin/src/HAL/HAL.h
@@ -91,6 +91,10 @@ void spiSendBlock(uint8_t token, const uint8_t* buf);
#define CPU_32_BIT
#include "math_32bit.h"
#include "HAL_LPC1768/HAL.h"
+#elif defined(__STM32F1__)
+ #define CPU_32_BIT
+ #include "math_32bit.h"
+ #include "HAL_STM32F1/HAL_Stm32f1.h"
#else
#error "Unsupported Platform!"
#endif
diff --git a/Marlin/src/HAL/HAL_STM32F1/HAL_Servo_Stm32f1.cpp b/Marlin/src/HAL/HAL_STM32F1/HAL_Servo_Stm32f1.cpp
new file mode 100644
index 0000000000..cd9b3a330b
--- /dev/null
+++ b/Marlin/src/HAL/HAL_STM32F1/HAL_Servo_Stm32f1.cpp
@@ -0,0 +1,52 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ * Copyright (C) 2017 Victor Perez
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+#ifdef __STM32F1__
+
+#include "../../../src/inc/MarlinConfig.h"
+
+#if HAS_SERVOS
+
+#include "HAL_Servo_Stm32f1.h"
+
+int8_t libServo::attach(const int pin) {
+ if (this->servoIndex >= MAX_SERVOS) return -1;
+ return Servo::attach(pin);
+}
+
+int8_t libServo::attach(const int pin, const int min, const int max) {
+ return Servo::attach(pin, min, max);
+}
+
+void libServo::move(const int value) {
+ if (this->attach(0) >= 0) {
+ this->write(value);
+ delay(SERVO_DELAY);
+ #if ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE)
+ this->detach();
+ #endif
+ }
+}
+#endif // HAS_SERVOS
+
+#endif // __STM32F1__
diff --git a/Marlin/src/HAL/HAL_STM32F1/HAL_Servo_Stm32f1.h b/Marlin/src/HAL/HAL_STM32F1/HAL_Servo_Stm32f1.h
new file mode 100644
index 0000000000..c035ba755e
--- /dev/null
+++ b/Marlin/src/HAL/HAL_STM32F1/HAL_Servo_Stm32f1.h
@@ -0,0 +1,41 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ * Copyright (C) 2017 Victor Perez
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+#ifndef HAL_SERVO_STM32F1_H
+#define HAL_SERVO_STM32F1_H
+
+#include <../../libraries/Servo/src/Servo.h>
+
+// Inherit and expand on the official library
+class libServo : public Servo {
+public:
+ int8_t attach(const int pin);
+ int8_t attach(const int pin, const int min, const int max);
+ void move(const int value);
+private:
+ uint16_t min_ticks;
+ uint16_t max_ticks;
+ uint8_t servoIndex; // index into the channel data for this servo
+};
+
+#endif // HAL_SERVO_STM32F1_H
diff --git a/Marlin/src/HAL/HAL_STM32F1/HAL_Stm32f1.cpp b/Marlin/src/HAL/HAL_STM32F1/HAL_Stm32f1.cpp
new file mode 100644
index 0000000000..2dafdce714
--- /dev/null
+++ b/Marlin/src/HAL/HAL_STM32F1/HAL_Stm32f1.cpp
@@ -0,0 +1,138 @@
+/**
+ * Marlin 3D Printer Firmware
+ *
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
+ * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
+ * Copyright (c) 2017 Victor Perez
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/**
+ * HAL for stm32duino.com based on Libmaple and compatible (STM32F1)
+ */
+
+#ifdef __STM32F1__
+
+// --------------------------------------------------------------------------
+// Includes
+// --------------------------------------------------------------------------
+
+#include "../HAL.h"
+
+//#include
+
+// --------------------------------------------------------------------------
+// Externals
+// --------------------------------------------------------------------------
+
+// --------------------------------------------------------------------------
+// Local defines
+// --------------------------------------------------------------------------
+
+// --------------------------------------------------------------------------
+// Types
+// --------------------------------------------------------------------------
+
+// --------------------------------------------------------------------------
+// Variables
+// --------------------------------------------------------------------------
+
+// --------------------------------------------------------------------------
+// Public Variables
+// --------------------------------------------------------------------------
+
+uint16_t HAL_adc_result;
+
+// --------------------------------------------------------------------------
+// Private Variables
+// --------------------------------------------------------------------------
+
+// --------------------------------------------------------------------------
+// Function prototypes
+// --------------------------------------------------------------------------
+
+// --------------------------------------------------------------------------
+// Private functions
+// --------------------------------------------------------------------------
+
+// --------------------------------------------------------------------------
+// Public functions
+// --------------------------------------------------------------------------
+
+/* VGPV Done with defines
+// disable interrupts
+void cli(void) { noInterrupts(); }
+
+// enable interrupts
+void sei(void) { interrupts(); }
+*/
+
+void HAL_clear_reset_source(void) { }
+
+/**
+ * TODO: Check this and change or remove.
+ * currently returns 1 that's equal to poweron reset.
+ */
+uint8_t HAL_get_reset_source(void) { return 1; }
+
+void _delay_ms(const int delay_ms) { delay(delay_ms); }
+
+extern "C" {
+ extern unsigned int _ebss; // end of bss section
+}
+
+/**
+ * TODO: Change this to correct it for libmaple
+ */
+
+// return free memory between end of heap (or end bss) and whatever is current
+
+/*
+#include "wirish/syscalls.c"
+//extern caddr_t _sbrk(int incr);
+#ifndef CONFIG_HEAP_END
+extern char _lm_heap_end;
+#define CONFIG_HEAP_END ((caddr_t)&_lm_heap_end)
+#endif
+
+extern "C" {
+ static int freeMemory() {
+ char top = 't';
+ return &top - reinterpret_cast(sbrk(0));
+ }
+ int freeMemory() {
+ int free_memory;
+ int heap_end = (int)_sbrk(0);
+ free_memory = ((int)&free_memory) - ((int)heap_end);
+ return free_memory;
+ }
+}
+*/
+
+// --------------------------------------------------------------------------
+// ADC
+// --------------------------------------------------------------------------
+
+void HAL_adc_start_conversion(const uint8_t adc_pin) {
+ HAL_adc_result = (analogRead(adc_pin) >> 2) & 0x3ff; // shift to get 10 bits only.
+}
+
+uint16_t HAL_adc_get_result(void) {
+ return HAL_adc_result;
+}
+
+#endif // __STM32F1__
diff --git a/Marlin/src/HAL/HAL_STM32F1/HAL_Stm32f1.h b/Marlin/src/HAL/HAL_STM32F1/HAL_Stm32f1.h
new file mode 100644
index 0000000000..590b32856f
--- /dev/null
+++ b/Marlin/src/HAL/HAL_STM32F1/HAL_Stm32f1.h
@@ -0,0 +1,195 @@
+/**
+ * Marlin 3D Printer Firmware
+ *
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
+ * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
+ * Copyright (c) 2017 Victor Perez
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/**
+ * HAL for stm32duino.com based on Libmaple and compatible (STM32F1)
+ */
+
+#ifndef _HAL_STM32F1_H
+#define _HAL_STM32F1_H
+
+#undef DEBUG_NONE
+
+#ifndef vsnprintf_P
+ #define vsnprintf_P vsnprintf
+#endif
+
+// --------------------------------------------------------------------------
+// Includes
+// --------------------------------------------------------------------------
+
+#include
+
+#include "Arduino.h"
+
+#include "fastio_Stm32f1.h"
+#include "watchdog_Stm32f1.h"
+
+#include "HAL_timers_Stm32f1.h"
+
+// --------------------------------------------------------------------------
+// Defines
+// --------------------------------------------------------------------------
+
+#if SERIAL_PORT == -1
+ #define MYSERIAL SerialUSB
+#elif SERIAL_PORT == 0
+ #define MYSERIAL Serial
+#elif SERIAL_PORT == 1
+ #define MYSERIAL Serial1
+#elif SERIAL_PORT == 2
+ #define MYSERIAL Serial2
+#elif SERIAL_PORT == 3
+ #define MYSERIAL Serial3
+#endif
+
+#define _BV(bit) (1 << (bit))
+
+/**
+ * TODO: review this to return 1 for pins that are not analog input
+ */
+#ifndef analogInputToDigitalPin
+ #define analogInputToDigitalPin(p) (p)
+#endif
+
+#define CRITICAL_SECTION_START noInterrupts();
+#define CRITICAL_SECTION_END interrupts();
+
+// On AVR this is in math.h?
+#define square(x) ((x)*(x))
+
+#ifndef strncpy_P
+ #define strncpy_P(dest, src, num) strncpy((dest), (src), (num))
+#endif
+
+// Fix bug in pgm_read_ptr
+#undef pgm_read_ptr
+#define pgm_read_ptr(addr) (*(addr))
+
+#define RST_POWER_ON 1
+#define RST_EXTERNAL 2
+#define RST_BROWN_OUT 4
+#define RST_WATCHDOG 8
+#define RST_JTAG 16
+#define RST_SOFTWARE 32
+#define RST_BACKUP 64
+
+// --------------------------------------------------------------------------
+// Types
+// --------------------------------------------------------------------------
+
+// --------------------------------------------------------------------------
+// Public Variables
+// --------------------------------------------------------------------------
+
+/** result of last ADC conversion */
+extern uint16_t HAL_adc_result;
+
+// --------------------------------------------------------------------------
+// Public functions
+// --------------------------------------------------------------------------
+
+// Disable interrupts
+#define cli() noInterrupts()
+
+// Enable interrupts
+#define sei() interrupts()
+
+// Memory related
+#define __bss_end __bss_end__
+
+/** clear reset reason */
+void HAL_clear_reset_source (void);
+
+/** reset reason */
+uint8_t HAL_get_reset_source (void);
+
+void _delay_ms(const int delay);
+
+/*
+extern "C" {
+ int freeMemory(void);
+}
+*/
+
+extern "C" char* _sbrk(int incr);
+/*
+static int freeMemory() {
+ volatile int top;
+ top = (int)((char*)&top - reinterpret_cast(_sbrk(0)));
+ return top;
+}
+*/
+static int freeMemory() {
+ volatile char top;
+ return &top - reinterpret_cast(_sbrk(0));
+}
+
+// SPI: Extended functions which take a channel number (hardware SPI only)
+/** Write single byte to specified SPI channel */
+void spiSend(uint32_t chan, byte b);
+/** Write buffer to specified SPI channel */
+void spiSend(uint32_t chan, const uint8_t* buf, size_t n);
+/** Read single byte from specified SPI channel */
+uint8_t spiRec(uint32_t chan);
+
+
+// EEPROM
+
+/**
+ * TODO: Write all this eeprom stuff. Can emulate eeprom in flash as last resort.
+ * Wire library should work for i2c eeproms.
+ */
+void eeprom_write_byte(unsigned char *pos, unsigned char value);
+unsigned char eeprom_read_byte(unsigned char *pos);
+void eeprom_read_block (void *__dst, const void *__src, size_t __n);
+void eeprom_update_block (const void *__src, void *__dst, size_t __n);
+
+// ADC
+
+#define HAL_ANALOG_SELECT(pin) pinMode(pin, INPUT_ANALOG);
+
+inline void HAL_adc_init(void) {}
+
+#define HAL_START_ADC(pin) HAL_adc_start_conversion(pin)
+#define HAL_READ_ADC HAL_adc_result
+
+void HAL_adc_start_conversion(const uint8_t adc_pin);
+
+uint16_t HAL_adc_get_result(void);
+
+/* Todo: Confirm none of this is needed.
+uint16_t HAL_getAdcReading(uint8_t chan);
+
+void HAL_startAdcConversion(uint8_t chan);
+uint8_t HAL_pinToAdcChannel(int pin);
+
+uint16_t HAL_getAdcFreerun(uint8_t chan, bool wait_for_conversion = false);
+//uint16_t HAL_getAdcSuperSample(uint8_t chan);
+
+void HAL_enable_AdcFreerun(void);
+//void HAL_disable_AdcFreerun(uint8_t chan);
+
+*/
+
+#endif // _HAL_STM32F1_H
diff --git a/Marlin/src/HAL/HAL_STM32F1/HAL_spi_Stm32f1.cpp b/Marlin/src/HAL/HAL_STM32F1/HAL_spi_Stm32f1.cpp
new file mode 100644
index 0000000000..3b4109f0c3
--- /dev/null
+++ b/Marlin/src/HAL/HAL_STM32F1/HAL_spi_Stm32f1.cpp
@@ -0,0 +1,169 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ * Copyright (C) 2017 Victor Perez
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/**
+ * Software SPI functions originally from Arduino Sd2Card Library
+ * Copyright (C) 2009 by William Greiman
+ */
+
+/**
+ * Adapted to the STM32F1 HAL
+ */
+
+#ifdef __STM32F1__
+
+// --------------------------------------------------------------------------
+// Includes
+// --------------------------------------------------------------------------
+
+#include "../HAL.h"
+#include "SPI.h"
+#include "pins_arduino.h"
+#include "spi_pins.h"
+#include "../../core/macros.h"
+
+// --------------------------------------------------------------------------
+// Public Variables
+// --------------------------------------------------------------------------
+
+static SPISettings spiConfig;
+
+// --------------------------------------------------------------------------
+// Public functions
+// --------------------------------------------------------------------------
+
+#if ENABLED(SOFTWARE_SPI)
+ // --------------------------------------------------------------------------
+ // Software SPI
+ // --------------------------------------------------------------------------
+ #error "Software SPI not supported for STM32F1. Use hardware SPI."
+
+#else
+
+// --------------------------------------------------------------------------
+// Hardware SPI
+// --------------------------------------------------------------------------
+
+/**
+ * VGPV SPI speed start and F_CPU/2, by default 72/2 = 36Mhz
+ */
+
+/**
+ * @brief Begin SPI port setup
+ *
+ * @return Nothing
+ *
+ * @details Only configures SS pin since libmaple creates and initialize the SPI object
+ */
+void spiBegin() {
+ #ifndef SS_PIN
+ #error "SS_PIN not defined!"
+ #endif
+ SET_OUTPUT(SS_PIN);
+ WRITE(SS_PIN, HIGH);
+}
+
+/**
+ * @brief Initializes SPI port to required speed rate and transfer mode (MSB, SPI MODE 0)
+ *
+ * @param spiRate Rate as declared in HAL.h (speed do not match AVR)
+ * @return Nothing
+ *
+ * @details
+ */
+void spiInit(uint8_t spiRate) {
+ uint8_t clock;
+ switch (spiRate) {
+ case SPI_FULL_SPEED: clock = SPI_CLOCK_DIV2 ; break;
+ case SPI_HALF_SPEED: clock = SPI_CLOCK_DIV4 ; break;
+ case SPI_QUARTER_SPEED: clock = SPI_CLOCK_DIV8 ; break;
+ case SPI_EIGHTH_SPEED: clock = SPI_CLOCK_DIV16; break;
+ case SPI_SPEED_5: clock = SPI_CLOCK_DIV32; break;
+ case SPI_SPEED_6: clock = SPI_CLOCK_DIV64; break;
+ default:
+ clock = SPI_CLOCK_DIV2; // Default from the SPI library
+ }
+ spiConfig = SPISettings(clock, MSBFIRST, SPI_MODE0);
+ SPI.begin();
+}
+
+/**
+ * @brief Receives a single byte from the SPI port.
+ *
+ * @return Byte received
+ *
+ * @details
+ */
+uint8_t spiRec(void) {
+ SPI.beginTransaction(spiConfig);
+ uint8_t returnByte = SPI.transfer(0xFF);
+ SPI.endTransaction();
+ return returnByte;
+}
+
+/**
+ * @brief Receives a number of bytes from the SPI port to a buffer
+ *
+ * @param buf Pointer to starting address of buffer to write to.
+ * @param nbyte Number of bytes to receive.
+ * @return Nothing
+ *
+ * @details Uses DMA
+ */
+void spiRead(uint8_t* buf, uint16_t nbyte) {
+ SPI.beginTransaction(spiConfig);
+ SPI.dmaTransfer(0, const_cast(buf), nbyte);
+ SPI.endTransaction();
+}
+
+/**
+ * @brief Sends a single byte on SPI port
+ *
+ * @param b Byte to send
+ *
+ * @details
+ */
+void spiSend(uint8_t b) {
+ SPI.beginTransaction(spiConfig);
+ SPI.send(b);
+ SPI.endTransaction();
+}
+
+/**
+ * @brief Write token and then write from 512 byte buffer to SPI (for SD card)
+ *
+ * @param buf Pointer with buffer start address
+ * @return Nothing
+ *
+ * @details Use DMA
+ */
+void spiSendBlock(uint8_t token, const uint8_t* buf) {
+ SPI.beginTransaction(spiConfig);
+ SPI.send(token);
+ SPI.dmaSend(const_cast(buf), 512);
+ SPI.endTransaction();
+}
+
+#endif // SOFTWARE_SPI
+
+#endif // __STM32F1__
diff --git a/Marlin/src/HAL/HAL_STM32F1/HAL_timers_Stm32f1.cpp b/Marlin/src/HAL/HAL_STM32F1/HAL_timers_Stm32f1.cpp
new file mode 100644
index 0000000000..bf1ae230b3
--- /dev/null
+++ b/Marlin/src/HAL/HAL_STM32F1/HAL_timers_Stm32f1.cpp
@@ -0,0 +1,145 @@
+/**
+ * Marlin 3D Printer Firmware
+ *
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
+ * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/**
+ * HAL for stm32duino.com based on Libmaple and compatible (STM32F1)
+ */
+
+#ifdef __STM32F1__
+
+// --------------------------------------------------------------------------
+// Includes
+// --------------------------------------------------------------------------
+
+#include "../HAL.h"
+
+#include "HAL_timers_Stm32f1.h"
+
+// --------------------------------------------------------------------------
+// Externals
+// --------------------------------------------------------------------------
+
+// --------------------------------------------------------------------------
+// Local defines
+// --------------------------------------------------------------------------
+
+#define NUM_HARDWARE_TIMERS 4
+
+//#define PRESCALER 1
+// --------------------------------------------------------------------------
+// Types
+// --------------------------------------------------------------------------
+
+
+// --------------------------------------------------------------------------
+// Public Variables
+// --------------------------------------------------------------------------
+
+// --------------------------------------------------------------------------
+// Private Variables
+// --------------------------------------------------------------------------
+/* VGPV
+const tTimerConfig TimerConfig [NUM_HARDWARE_TIMERS] = {
+{ TC0, 0, TC0_IRQn, 0}, // 0 - [servo timer5]
+{ TC0, 1, TC1_IRQn, 0}, // 1
+{ TC0, 2, TC2_IRQn, 0}, // 2
+{ TC1, 0, TC3_IRQn, 2}, // 3 - stepper
+{ TC1, 1, TC4_IRQn, 15}, // 4 - temperature
+{ TC1, 2, TC5_IRQn, 0}, // 5 - [servo timer3]
+{ TC2, 0, TC6_IRQn, 0}, // 6
+{ TC2, 1, TC7_IRQn, 0}, // 7
+{ TC2, 2, TC8_IRQn, 0}, // 8
+};
+*/
+// --------------------------------------------------------------------------
+// Function prototypes
+// --------------------------------------------------------------------------
+
+// --------------------------------------------------------------------------
+// Private functions
+// --------------------------------------------------------------------------
+
+// --------------------------------------------------------------------------
+// Public functions
+// --------------------------------------------------------------------------
+
+/*
+Timer_clock1: Prescaler 2 -> 42MHz
+Timer_clock2: Prescaler 8 -> 10.5MHz
+Timer_clock3: Prescaler 32 -> 2.625MHz
+Timer_clock4: Prescaler 128 -> 656.25kHz
+*/
+
+/**
+ * TODO: Calculate Timer prescale value, so we get the 32bit to adjust
+ */
+
+void HAL_timer_start (uint8_t timer_num, uint32_t frequency) {
+ switch (timer_num) {
+ case STEP_TIMER_NUM:
+ StepperTimer.pause();
+ StepperTimer.setCount(0);
+ StepperTimer.setPrescaleFactor(STEPPER_TIMER_PRESCALE);
+ StepperTimer.setOverflow(0xFFFF);
+ StepperTimer.setCompare (STEP_TIMER_CHAN, (HAL_STEPPER_TIMER_RATE / frequency));
+ StepperTimer.refresh();
+ StepperTimer.resume();
+ break;
+ case TEMP_TIMER_NUM:
+ TempTimer.pause();
+ TempTimer.setCount(0);
+ TempTimer.setPrescaleFactor(TEMP_TIMER_PRESCALE);
+ TempTimer.setOverflow(0xFFFF);
+ TempTimer.setCompare (TEMP_TIMER_CHAN, ((F_CPU / TEMP_TIMER_PRESCALE) / frequency));
+ TempTimer.refresh();
+ TempTimer.resume();
+ break;
+ }
+}
+
+void HAL_timer_enable_interrupt (uint8_t timer_num) {
+ switch (timer_num) {
+ case STEP_TIMER_NUM:
+ StepperTimer.attachInterrupt(STEP_TIMER_CHAN, stepTC_Handler);
+ break;
+ case TEMP_TIMER_NUM:
+ TempTimer.attachInterrupt(STEP_TIMER_CHAN, tempTC_Handler);
+ break;
+ default:
+ break;
+ }
+}
+
+void HAL_timer_disable_interrupt (uint8_t timer_num) {
+ switch (timer_num) {
+ case STEP_TIMER_NUM:
+ StepperTimer.detachInterrupt(STEP_TIMER_CHAN);
+ break;
+ case TEMP_TIMER_NUM:
+ TempTimer.detachInterrupt(STEP_TIMER_CHAN);
+ break;
+ default:
+ break;
+ }
+}
+
+#endif // __STM32F1__
diff --git a/Marlin/src/HAL/HAL_STM32F1/HAL_timers_Stm32f1.h b/Marlin/src/HAL/HAL_STM32F1/HAL_timers_Stm32f1.h
new file mode 100644
index 0000000000..7065ebdb23
--- /dev/null
+++ b/Marlin/src/HAL/HAL_STM32F1/HAL_timers_Stm32f1.h
@@ -0,0 +1,183 @@
+/**
+ * Marlin 3D Printer Firmware
+ *
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
+ * Copyright (c) 2017 Victor Perez
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/**
+ * HAL for stm32duino.com based on Libmaple and compatible (STM32F1)
+ */
+
+#ifndef _HAL_TIMERS_STM32F1_H
+#define _HAL_TIMERS_STM32F1_H
+
+// --------------------------------------------------------------------------
+// Includes
+// --------------------------------------------------------------------------
+
+#include
+
+// --------------------------------------------------------------------------
+// Defines
+// --------------------------------------------------------------------------
+
+/**
+ * TODO: Check and confirm what timer we will use for each Temps and stepper driving.
+ * We should probable drive temps with PWM.
+ */
+#define FORCE_INLINE __attribute__((always_inline)) inline
+
+#define HAL_TIMER_TYPE uint16_t
+#define HAL_TIMER_TYPE_MAX 0xFFFF
+
+#define STEP_TIMER_NUM 5 // index of timer to use for stepper
+#define STEP_TIMER_CHAN 1 // Channel of the timer to use for compare and interrupts
+#define TEMP_TIMER_NUM 2 // index of timer to use for temperature
+#define TEMP_TIMER_CHAN 1 // Channel of the timer to use for compare and interrupts
+
+
+#define HAL_TIMER_RATE (F_CPU) // frequency of timers peripherals
+#define STEPPER_TIMER_PRESCALE 36 // prescaler for setting stepper timer, 2Mhz
+#define HAL_STEPPER_TIMER_RATE (HAL_TIMER_RATE / STEPPER_TIMER_PRESCALE) // frequency of stepper timer (HAL_TIMER_RATE / STEPPER_TIMER_PRESCALE)
+#define HAL_TICKS_PER_US ((HAL_STEPPER_TIMER_RATE) / 1000000) // stepper timer ticks per us
+
+#define TEMP_TIMER_PRESCALE 1000 // prescaler for setting Temp timer, 72Khz
+#define TEMP_TIMER_FREQUENCY 1000 // temperature interrupt frequency
+
+#define ENABLE_STEPPER_DRIVER_INTERRUPT() HAL_timer_enable_interrupt (STEP_TIMER_NUM)
+#define DISABLE_STEPPER_DRIVER_INTERRUPT() HAL_timer_disable_interrupt (STEP_TIMER_NUM)
+
+#define ENABLE_TEMPERATURE_INTERRUPT() HAL_timer_enable_interrupt (TEMP_TIMER_NUM)
+#define DISABLE_TEMPERATURE_INTERRUPT() HAL_timer_disable_interrupt (TEMP_TIMER_NUM)
+
+#define HAL_ENABLE_ISRs() do { if (thermalManager.in_temp_isr)DISABLE_TEMPERATURE_INTERRUPT(); else ENABLE_TEMPERATURE_INTERRUPT(); ENABLE_STEPPER_DRIVER_INTERRUPT(); } while(0)
+// TODO change this
+
+
+#define HAL_TEMP_TIMER_ISR extern "C" void tempTC_Handler(void)
+#define HAL_STEP_TIMER_ISR extern "C" void stepTC_Handler(void)
+
+extern "C" void tempTC_Handler(void);
+extern "C" void stepTC_Handler(void);
+
+// --------------------------------------------------------------------------
+// Types
+// --------------------------------------------------------------------------
+
+
+// --------------------------------------------------------------------------
+// Public Variables
+// --------------------------------------------------------------------------
+
+static HardwareTimer StepperTimer(STEP_TIMER_NUM);
+static HardwareTimer TempTimer(TEMP_TIMER_NUM);
+
+// --------------------------------------------------------------------------
+// Public functions
+// --------------------------------------------------------------------------
+
+void HAL_timer_start (uint8_t timer_num, uint32_t frequency);
+void HAL_timer_enable_interrupt(uint8_t timer_num);
+void HAL_timer_disable_interrupt(uint8_t timer_num);
+
+/**
+ * NOTE: By default libmaple sets ARPE = 1, which means the Auto reload register is preloaded (will only update with an update event)
+ * Thus we have to pause the timer, update the value, refresh, resume the timer.
+ * That seems like a big waste of time and may be better to change the timer config to ARPE = 0, so ARR can be updated any time.
+ * We are using a Channel in each timer in Capture/Compare mode. We could also instead use the Time Update Event Interrupt, but need to disable ARPE
+ * so we can change the ARR value on the fly (without calling refresh), and not get an interrupt right there because we caused an UEV.
+ * This mode pretty much makes 2 timers unusable for PWM since they have their counts updated all the time on ISRs.
+ * The way Marlin manages timer interrupts doesn't make for an efficient usage in STM32F1
+ * Todo: Look at that possibility later.
+ */
+
+static FORCE_INLINE void HAL_timer_set_count (uint8_t timer_num, uint32_t count) {
+ switch (timer_num) {
+ case STEP_TIMER_NUM:
+ StepperTimer.pause();
+ StepperTimer.setCompare (STEP_TIMER_CHAN, count);
+ StepperTimer.refresh ();
+ StepperTimer.resume ();
+ break;
+ case TEMP_TIMER_NUM:
+ TempTimer.pause();
+ TempTimer.setCompare (TEMP_TIMER_CHAN, count);
+ TempTimer.refresh ();
+ TempTimer.resume ();
+ break;
+ default:
+ break;
+ }
+}
+
+static FORCE_INLINE HAL_TIMER_TYPE HAL_timer_get_count (uint8_t timer_num) {
+ HAL_TIMER_TYPE temp;
+ switch (timer_num) {
+ case STEP_TIMER_NUM:
+ temp = StepperTimer.getCompare(STEP_TIMER_CHAN);
+ break;
+ case TEMP_TIMER_NUM:
+ temp = TempTimer.getCompare(TEMP_TIMER_CHAN);
+ break;
+ default:
+ temp = 0;
+ break;
+ }
+ return temp;
+}
+
+static FORCE_INLINE HAL_TIMER_TYPE HAL_timer_get_current_count(uint8_t timer_num) {
+ HAL_TIMER_TYPE temp;
+ switch (timer_num) {
+ case STEP_TIMER_NUM:
+ temp = StepperTimer.getCount();
+ break;
+ case TEMP_TIMER_NUM:
+ temp = TempTimer.getCount();
+ break;
+ default:
+ temp = 0;
+ break;
+ }
+ return temp;
+}
+
+
+//void HAL_timer_isr_prologue (uint8_t timer_num);
+
+static FORCE_INLINE void HAL_timer_isr_prologue(uint8_t timer_num) {
+ switch (timer_num) {
+ case STEP_TIMER_NUM:
+ StepperTimer.pause();
+ StepperTimer.setCount(0);
+ StepperTimer.refresh();
+ StepperTimer.resume();
+ break;
+ case TEMP_TIMER_NUM:
+ TempTimer.pause();
+ TempTimer.setCount(0);
+ TempTimer.refresh();
+ TempTimer.resume();
+ break;
+ default:
+ break;
+ }
+}
+
+#endif // _HAL_TIMERS_STM32F1_H
diff --git a/Marlin/src/HAL/HAL_STM32F1/README.md b/Marlin/src/HAL/HAL_STM32F1/README.md
new file mode 100644
index 0000000000..1345d59b3c
--- /dev/null
+++ b/Marlin/src/HAL/HAL_STM32F1/README.md
@@ -0,0 +1,32 @@
+# This HAL is for STM32F103 boards used with libmaple/stm32duino Arduino core.
+
+# This HAL is in development and has not been tested with an actual printer.
+
+### The stm32 core needs a modification in the file util.h to avoid conflict with Marlin macros for Debug.
+Since only 1 file needs change in the stm32duino core, it's preferable over making changes to Marlin.
+
+
+After these lines:
+<>
+#else
+#define ASSERT_FAULT(exp) (void)((0))
+#endif
+<>
+
+Add the following 3 lines:
+<>
+#undef DEBUG_NONE
+#undef DEBUG_FAULT
+#undef DEBUG_ALL
+<>
+
+### Main developers:
+Victorpv
+
+
+### Most up to date repository for this HAL:
+https://github.com/victorpv/Marlin/tree/bugfix-2.0.x
+
+PRs should be first sent to that fork, and once tested merged to Marlin bugfix-2.0.x branch.
+
+
diff --git a/Marlin/src/HAL/HAL_STM32F1/SanityCheck_Stm32f1.h b/Marlin/src/HAL/HAL_STM32F1/SanityCheck_Stm32f1.h
new file mode 100644
index 0000000000..eec7e4d23c
--- /dev/null
+++ b/Marlin/src/HAL/HAL_STM32F1/SanityCheck_Stm32f1.h
@@ -0,0 +1,70 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/**
+ * HAL for stm32duino.com based on Libmaple and compatible (STM32F1)
+ */
+
+/**
+ * Test Re-ARM specific configuration values for errors at compile-time.
+ */
+#if ENABLED(SPINDLE_LASER_ENABLE)
+ #if !PIN_EXISTS(SPINDLE_LASER_ENABLE)
+ #error "SPINDLE_LASER_ENABLE requires SPINDLE_LASER_ENABLE_PIN."
+ #elif SPINDLE_DIR_CHANGE && !PIN_EXISTS(SPINDLE_DIR)
+ #error "SPINDLE_DIR_PIN not defined."
+ #elif ENABLED(SPINDLE_LASER_PWM) && PIN_EXISTS(SPINDLE_LASER_PWM)
+ #if !PWM_PIN(SPINDLE_LASER_PWM_PIN)
+ #error "SPINDLE_LASER_PWM_PIN not assigned to a PWM pin."
+ #elif !(SPINDLE_LASER_PWM_PIN == 4 || SPINDLE_LASER_PWM_PIN == 6 || SPINDLE_LASER_PWM_PIN == 11)
+ #error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector"
+ #elif SPINDLE_LASER_POWERUP_DELAY < 1
+ #error "SPINDLE_LASER_POWERUP_DELAY must be greater than 0."
+ #elif SPINDLE_LASER_POWERDOWN_DELAY < 1
+ #error "SPINDLE_LASER_POWERDOWN_DELAY must be greater than 0."
+ #elif !defined(SPINDLE_LASER_PWM_INVERT)
+ #error "SPINDLE_LASER_PWM_INVERT missing."
+ #elif !defined(SPEED_POWER_SLOPE) || !defined(SPEED_POWER_INTERCEPT) || !defined(SPEED_POWER_MIN) || !defined(SPEED_POWER_MAX)
+ #error "SPINDLE_LASER_PWM equation constant(s) missing."
+ #elif PIN_EXISTS(CASE_LIGHT) && SPINDLE_LASER_PWM_PIN == CASE_LIGHT_PIN
+ #error "SPINDLE_LASER_PWM_PIN is used by CASE_LIGHT_PIN."
+ #elif PIN_EXISTS(E0_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E0_AUTO_FAN_PIN
+ #error "SPINDLE_LASER_PWM_PIN is used by E0_AUTO_FAN_PIN."
+ #elif PIN_EXISTS(E1_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E1_AUTO_FAN_PIN
+ #error "SPINDLE_LASER_PWM_PIN is used by E1_AUTO_FAN_PIN."
+ #elif PIN_EXISTS(E2_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E2_AUTO_FAN_PIN
+ #error "SPINDLE_LASER_PWM_PIN is used by E2_AUTO_FAN_PIN."
+ #elif PIN_EXISTS(E3_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E3_AUTO_FAN_PIN
+ #error "SPINDLE_LASER_PWM_PIN is used by E3_AUTO_FAN_PIN."
+ #elif PIN_EXISTS(E4_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E4_AUTO_FAN_PIN
+ #error "SPINDLE_LASER_PWM_PIN is used by E4_AUTO_FAN_PIN."
+ #elif PIN_EXISTS(FAN) && SPINDLE_LASER_PWM_PIN == FAN_PIN
+ #error "SPINDLE_LASER_PWM_PIN is used FAN_PIN."
+ #elif PIN_EXISTS(FAN1) && SPINDLE_LASER_PWM_PIN == FAN1_PIN
+ #error "SPINDLE_LASER_PWM_PIN is used FAN1_PIN."
+ #elif PIN_EXISTS(FAN2) && SPINDLE_LASER_PWM_PIN == FAN2_PIN
+ #error "SPINDLE_LASER_PWM_PIN is used FAN2_PIN."
+ #elif PIN_EXISTS(CONTROLLERFAN) && SPINDLE_LASER_PWM_PIN == CONTROLLERFAN_PIN
+ #error "SPINDLE_LASER_PWM_PIN is used by CONTROLLERFAN_PIN."
+ #endif
+ #endif
+#endif // SPINDLE_LASER_ENABLE
diff --git a/Marlin/src/HAL/HAL_STM32F1/endstop_interrupts.h b/Marlin/src/HAL/HAL_STM32F1/endstop_interrupts.h
new file mode 100644
index 0000000000..023e5a9b65
--- /dev/null
+++ b/Marlin/src/HAL/HAL_STM32F1/endstop_interrupts.h
@@ -0,0 +1,91 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ * Copyright (C) 2017 Victor Perez
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/**
+ * Endstop interrupts for Libmaple STM32F1 based targets.
+ *
+ * On STM32F, all pins support external interrupt capability.
+ * Any pin can be used for external interrupts, but there are some restrictions.
+ * At most 16 different external interrupts can be used at one time.
+ * Further, you can’t just pick any 16 pins to use. This is because every pin on the STM32
+ * connects to what is called an EXTI line, and only one pin per EXTI line can be used for external interrupts at a time
+ * Check the Reference Manual of the MCU to confirm which line is used by each pin
+ */
+
+/**
+ * Endstop Interrupts
+ *
+ * Without endstop interrupts the endstop pins must be polled continually in
+ * the stepper-ISR via endstops.update(), most of the time finding no change.
+ * With this feature endstops.update() is called only when we know that at
+ * least one endstop has changed state, saving valuable CPU cycles.
+ *
+ * This feature only works when all used endstop pins can generate an 'external interrupt'.
+ *
+ * Test whether pins issue interrupts on your board by flashing 'pin_interrupt_test.ino'.
+ * (Located in Marlin/buildroot/share/pin_interrupt_test/pin_interrupt_test.ino)
+ */
+
+#ifndef _ENDSTOP_INTERRUPTS_H_
+#define _ENDSTOP_INTERRUPTS_H_
+
+void setup_endstop_interrupts(void) {
+ #if HAS_X_MAX
+ pinMode(X_MAX_PIN, INPUT);
+ attachInterrupt(X_MAX_PIN, endstop_ISR, CHANGE); // assign it
+ #endif
+ #if HAS_X_MIN
+ pinMode(X_MIN_PIN, INPUT);
+ attachInterrupt(X_MIN_PIN, endstop_ISR, CHANGE);
+ #endif
+ #if HAS_Y_MAX
+ pinMode(Y_MAX_PIN, INPUT);
+ attachInterrupt(Y_MAX_PIN, endstop_ISR, CHANGE);
+ #endif
+ #if HAS_Y_MIN
+ pinMode(Y_MIN_PIN, INPUT);
+ attachInterrupt(Y_MIN_PIN, endstop_ISR, CHANGE);
+ #endif
+ #if HAS_Z_MAX
+ pinMode(Z_MAX_PIN, INPUT);
+ attachInterrupt(Z_MAX_PIN, endstop_ISR, CHANGE);
+ #endif
+ #if HAS_Z_MIN
+ pinMode(Z_MIN_PIN, INPUT);
+ attachInterrupt(Z_MIN_PIN, endstop_ISR, CHANGE);
+ #endif
+ #if HAS_Z2_MAX
+ pinMode(Z2_MAX_PIN, INPUT);
+ attachInterrupt(Z2_MAX_PIN, endstop_ISR, CHANGE);
+ #endif
+ #if HAS_Z2_MIN
+ pinMode(Z2_MIN_PIN, INPUT);
+ attachInterrupt(Z2_MIN_PIN, endstop_ISR, CHANGE);
+ #endif
+ #if HAS_Z_MIN_PROBE_PIN
+ pinMode(Z_MIN_PROBE_PIN, INPUT);
+ attachInterrupt(Z_MIN_PROBE_PIN, endstop_ISR, CHANGE);
+ #endif
+}
+
+#endif //_ENDSTOP_INTERRUPTS_H_
diff --git a/Marlin/src/HAL/HAL_STM32F1/fastio_Stm32f1.h b/Marlin/src/HAL/HAL_STM32F1/fastio_Stm32f1.h
new file mode 100644
index 0000000000..0378ae7f6f
--- /dev/null
+++ b/Marlin/src/HAL/HAL_STM32F1/fastio_Stm32f1.h
@@ -0,0 +1,53 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ * Copyright (C) 2017 Victor Perez
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/**
+ * Fast I/O interfaces for STM32F1
+ * These use GPIO functions instead of Direct Port Manipulation, as on AVR.
+ */
+
+#ifndef _FASTIO_STM32F1_H
+#define _FASTIO_STM32F1_H
+
+#include
+
+#define READ(IO) (gpio_read_bit(PIN_MAP[IO].gpio_device, PIN_MAP[IO].gpio_bit) ? HIGH : LOW)
+#define WRITE(IO, v) do{ gpio_write_bit(PIN_MAP[IO].gpio_device, PIN_MAP[IO].gpio_bit, v); } while (0)
+#define TOGGLE(IO) do{ gpio_toggle_bit(PIN_MAP[IO].gpio_device, PIN_MAP[IO].gpio_bit); } while (0)
+#define WRITE_VAR(IO, v) WRITE(io, v)
+
+#define _GET_MODE(IO) (gpio_get_mode(PIN_MAP[IO].gpio_device, PIN_MAP[IO].gpio_bit))
+#define _SET_MODE(IO,M) do{ gpio_set_mode(PIN_MAP[IO].gpio_device, PIN_MAP[IO].gpio_bit, M); } while (0)
+#define _SET_OUTPUT(IO) _SET_MODE(IO, GPIO_OUTPUT_PP)
+
+#define SET_INPUT(IO) _SET_MODE(IO, GPIO_INPUT_FLOATING)
+#define SET_INPUT_PULLUP(IO) _SET_MODE(IO, GPIO_INPUT_PU)
+#define SET_OUTPUT(IO) do{ _SET_OUTPUT(IO); WRITE(IO, LOW); }while(0)
+
+#define GET_INPUT(IO) (_GET_MODE(IO) == GPIO_INPUT_FLOATING || _GET_MODE(IO) == GPIO_INPUT_ANALOG || _GET_MODE(IO) == GPIO_INPUT_PU || _GET_MODE(IO) == GPIO_INPUT_PD)
+#define GET_OUTPUT(IO) (_GET_MODE(IO) == GPIO_OUTPUT_PP)
+#define GET_TIMER(IO) (PIN_MAP[IO].timer_device != NULL)
+
+#define OUT_WRITE(IO, v) { _SET_OUTPUT(IO); WRITE(IO, v); }
+
+#endif /* _FASTIO_STM32F1_H */
diff --git a/Marlin/src/HAL/HAL_STM32F1/persistent_store_impl.cpp b/Marlin/src/HAL/HAL_STM32F1/persistent_store_impl.cpp
new file mode 100644
index 0000000000..af4f965d9a
--- /dev/null
+++ b/Marlin/src/HAL/HAL_STM32F1/persistent_store_impl.cpp
@@ -0,0 +1,98 @@
+/**
+ * Marlin 3D Printer Firmware
+ *
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
+ * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
+ * Copyright (c) 2016 Victor Perez victor_pv@hotmail.com
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/**
+ * HAL for stm32duino.com based on Libmaple and compatible (STM32F1)
+ */
+
+#ifdef __STM32F1__
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(EEPROM_SETTINGS)
+
+#include "../persistent_store_api.h"
+
+//#include "../../core/types.h"
+//#include "../../core/language.h"
+//#include "../../core/serial.h"
+//#include "../../core/utility.h"
+
+#include "../../sd/cardreader.h"
+
+
+namespace HAL {
+namespace PersistentStore {
+
+#define CONFIG_FILE_NAME "eeprom.dat"
+#define HAL_STM32F1_EEPROM_SIZE 4096
+char HAL_STM32F1_eeprom_content[HAL_STM32F1_EEPROM_SIZE];
+
+bool access_start() {
+ if (!card.cardOK) return false;
+ int16_t bytes_read = 0;
+ const char eeprom_zero = 0xFF;
+ card.openFile((char *)CONFIG_FILE_NAME,true);
+ bytes_read = card.read (HAL_STM32F1_eeprom_content, HAL_STM32F1_EEPROM_SIZE);
+ if (bytes_read == -1) return false;
+ for (; bytes_read < HAL_STM32F1_EEPROM_SIZE; bytes_read++) {
+ HAL_STM32F1_eeprom_content[bytes_read] = eeprom_zero;
+ }
+ card.closefile();
+ return true;
+}
+
+
+bool access_finish(){
+ if (!card.cardOK) return false;
+ int16_t bytes_written = 0;
+ card.openFile((char *)CONFIG_FILE_NAME,true);
+ bytes_written = card.write (HAL_STM32F1_eeprom_content, HAL_STM32F1_EEPROM_SIZE);
+ card.closefile();
+ return (bytes_written == HAL_STM32F1_EEPROM_SIZE);
+}
+
+bool write_data(int &pos, const uint8_t *value, uint16_t size, uint16_t *crc) {
+ for (int i = 0; i < size; i++) {
+ HAL_STM32F1_eeprom_content [pos + i] = value[i];
+ }
+ crc16(crc, value, size);
+ pos += size;
+ return true;
+}
+
+void read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc) {
+ for (int i = 0; i < size; i++) {
+ value[i] = HAL_STM32F1_eeprom_content [pos + i];
+ }
+ crc16(crc, value, size);
+ pos += size;
+}
+
+} // PersistentStore::
+} // HAL::
+
+#endif // EEPROM_SETTINGS
+
+#endif // __STM32F1__
+
diff --git a/Marlin/src/HAL/HAL_STM32F1/spi_pins.h b/Marlin/src/HAL/HAL_STM32F1/spi_pins.h
new file mode 100644
index 0000000000..255c33c106
--- /dev/null
+++ b/Marlin/src/HAL/HAL_STM32F1/spi_pins.h
@@ -0,0 +1,37 @@
+/**
+* Marlin 3D Printer Firmware
+* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+*
+* This program is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation, either version 3 of the License, or
+* (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program. If not, see .
+*
+*/
+
+/**
+ * HAL for stm32duino.com based on Libmaple and compatible (STM32F1)
+ */
+
+#ifndef SPI_PINS_H_
+#define SPI_PINS_H_
+
+/**
+ * Define SPI Pins: SCK, MISO, MOSI, SS
+ *
+ * Available chip select pins for HW SPI are 4 10 52 77
+ */
+#define SCK_PIN PA5
+#define MISO_PIN PA6
+#define MOSI_PIN PA7
+#define SS_PIN PA4
+
+#endif // SPI_PINS_H_
diff --git a/Marlin/src/HAL/HAL_STM32F1/watchdog_Stm32f1.cpp b/Marlin/src/HAL/HAL_STM32F1/watchdog_Stm32f1.cpp
new file mode 100644
index 0000000000..787f53f4a9
--- /dev/null
+++ b/Marlin/src/HAL/HAL_STM32F1/watchdog_Stm32f1.cpp
@@ -0,0 +1,53 @@
+/**
+* Marlin 3D Printer Firmware
+* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+*
+* Based on Sprinter and grbl.
+* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+*
+* This program is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation, either version 3 of the License, or
+* (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program. If not, see .
+*
+*/
+
+/**
+ * HAL for stm32duino.com based on Libmaple and compatible (STM32F1)
+ */
+
+#ifdef __STM32F1__
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(USE_WATCHDOG)
+
+#include
+#include "watchdog_Stm32f1.h"
+
+void watchdogSetup(void) {
+ // do whatever. don't remove this function.
+}
+
+/**
+ * @brief Initialized the independent hardware watchdog.
+ *
+ * @return No return
+ *
+ * @details The watchdog clock is 40Khz. We need a 4 seconds interval, so use a /256 preescaler and 625 reload value (counts down to 0)
+ */
+void watchdog_init(void) {
+ //iwdg_init(IWDG_PRE_256, STM32F1_WD_RELOAD);
+}
+
+#endif // USE_WATCHDOG
+
+#endif // __STM32F1__
diff --git a/Marlin/src/HAL/HAL_STM32F1/watchdog_Stm32f1.h b/Marlin/src/HAL/HAL_STM32F1/watchdog_Stm32f1.h
new file mode 100644
index 0000000000..6b71530acb
--- /dev/null
+++ b/Marlin/src/HAL/HAL_STM32F1/watchdog_Stm32f1.h
@@ -0,0 +1,44 @@
+/**
+* Marlin 3D Printer Firmware
+* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+*
+* Based on Sprinter and grbl.
+* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+*
+* This program is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation, either version 3 of the License, or
+* (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program. If not, see .
+*
+*/
+
+/**
+ * HAL for stm32duino.com based on Libmaple and compatible (STM32F1)
+ */
+
+#ifndef WATCHDOG_STM32F1_H
+#define WATCHDOG_STM32F1_H
+#include
+
+#include "../../../src/inc/MarlinConfig.h"
+#define STM32F1_WD_RELOAD 625
+
+
+// Arduino STM32F1 core now has watchdog support
+
+// Initialize watchdog with a 4 second countdown time
+void watchdog_init();
+
+// Reset watchdog. MUST be called at least every 4 seconds after the
+// first watchdog_init or STM32F1 will reset.
+inline void watchdog_reset() { iwdg_feed(); }
+
+#endif // WATCHDOG_STM32F1_H
diff --git a/Marlin/src/HAL/HAL_SanityCheck.h b/Marlin/src/HAL/HAL_SanityCheck.h
index 04b341ae2b..33f200de7c 100644
--- a/Marlin/src/HAL/HAL_SanityCheck.h
+++ b/Marlin/src/HAL/HAL_SanityCheck.h
@@ -30,6 +30,8 @@
#include "HAL_TEENSY35_36/SanityCheck_Teensy_35_36.h"
#elif defined(TARGET_LPC1768)
#include "HAL_LPC1768/SanityCheck_Re_ARM.h"
+#elif defined(__STM32F1__)
+ #include "HAL_STM32F1/SanityCheck_Stm32f1.h"
#else
#error Unsupported Platform!
#endif
diff --git a/Marlin/src/HAL/HAL_spi_pins.h b/Marlin/src/HAL/HAL_spi_pins.h
index fe220a1669..9b5886cfef 100644
--- a/Marlin/src/HAL/HAL_spi_pins.h
+++ b/Marlin/src/HAL/HAL_spi_pins.h
@@ -34,7 +34,8 @@
#elif defined(TARGET_LPC1768)
#include "HAL_LPC1768/spi_pins.h"
-
+#elif defined(__STM32F1__)
+ #include "HAL_STM32F1/spi_pins.h"
#else
#error "Unsupported Platform!"
#endif
diff --git a/Marlin/src/config/examples/stm32f103ret6/Configuration.h b/Marlin/src/config/examples/stm32f103ret6/Configuration.h
new file mode 100644
index 0000000000..a4b395403c
--- /dev/null
+++ b/Marlin/src/config/examples/stm32f103ret6/Configuration.h
@@ -0,0 +1,1643 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/**
+ * Configuration.h
+ *
+ * Basic settings such as:
+ *
+ * - Type of electronics
+ * - Type of temperature sensor
+ * - Printer geometry
+ * - Endstop configuration
+ * - LCD controller
+ * - Extra features
+ *
+ * Advanced settings can be found in Configuration_adv.h
+ *
+ */
+#ifndef CONFIGURATION_H
+#define CONFIGURATION_H
+#define CONFIGURATION_H_VERSION 020000
+
+//===========================================================================
+//============================= Getting Started =============================
+//===========================================================================
+
+/**
+ * Here are some standard links for getting your machine calibrated:
+ *
+ * http://reprap.org/wiki/Calibration
+ * http://youtu.be/wAL9d7FgInk
+ * http://calculator.josefprusa.cz
+ * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide
+ * http://www.thingiverse.com/thing:5573
+ * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
+ * http://www.thingiverse.com/thing:298812
+ */
+
+//===========================================================================
+//============================= DELTA Printer ===============================
+//===========================================================================
+// For a Delta printer start with one of the configuration files in the
+// example_configurations/delta directory and customize for your machine.
+//
+
+//===========================================================================
+//============================= SCARA Printer ===============================
+//===========================================================================
+// For a SCARA printer start with the configuration files in
+// example_configurations/SCARA and customize for your machine.
+//
+
+// @section info
+
+// User-specified version info of this build to display in [Pronterface, etc] terminal window during
+// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
+// build by the user have been successfully uploaded into firmware.
+#define STRING_CONFIG_H_AUTHOR "Victor Perez" // Who made the changes.
+#define SHOW_BOOTSCREEN
+#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION "STM32F103RET6 board" // will be shown during bootup in line 1
+#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2
+
+//
+// *** VENDORS PLEASE READ *****************************************************
+//
+// Marlin now allow you to have a vendor boot image to be displayed on machine
+// start. When SHOW_CUSTOM_BOOTSCREEN is defined Marlin will first show your
+// custom boot image and then the default Marlin boot image is shown.
+//
+// We suggest for you to take advantage of this new feature and keep the Marlin
+// boot image unmodified. For an example have a look at the bq Hephestos 2
+// example configuration folder.
+//
+//#define SHOW_CUSTOM_BOOTSCREEN
+// @section machine
+
+/**
+ * Select which serial port on the board will be used for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port 0 is always used by the Arduino bootloader regardless of this setting.
+ *
+ * :[0, 1, 2, 3, 4, 5, 6, 7]
+ */
+#define SERIAL_PORT 0
+
+/**
+ * This setting determines the communication speed of the printer.
+ *
+ * 250000 works in most cases, but you might try a lower speed if
+ * you commonly experience drop-outs during host printing.
+ *
+ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000]
+ */
+#define BAUDRATE 250000
+
+// Enable the Bluetooth serial interface on AT90USB devices
+//#define BLUETOOTH
+
+// The following define selects which electronics board you have.
+// Please choose the name from boards.h that matches your setup
+#ifndef MOTHERBOARD
+ #define MOTHERBOARD BOARD_STM32F1R
+#endif
+
+// Optional custom name for your RepStrap or other custom machine
+// Displayed in the LCD "Ready" message
+#define CUSTOM_MACHINE_NAME "CTC i3 Pro B"
+
+// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
+// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
+
+// @section extruder
+
+// This defines the number of extruders
+// :[1, 2, 3, 4, 5]
+#define EXTRUDERS 1
+
+// For Cyclops or any "multi-extruder" that shares a single nozzle.
+//#define SINGLENOZZLE
+
+/**
+ * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
+ *
+ * This device allows one stepper driver on a control board to drive
+ * two to eight stepper motors, one at a time, in a manner suitable
+ * for extruders.
+ *
+ * This option only allows the multiplexer to switch on tool-change.
+ * Additional options to configure custom E moves are pending.
+ */
+//#define MK2_MULTIPLEXER
+#if ENABLED(MK2_MULTIPLEXER)
+ // Override the default DIO selector pins here, if needed.
+ // Some pins files may provide defaults for these pins.
+ //#define E_MUX0_PIN 40 // Always Required
+ //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers
+ //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers
+#endif
+
+// A dual extruder that uses a single stepper motor
+//#define SWITCHING_EXTRUDER
+#if ENABLED(SWITCHING_EXTRUDER)
+ #define SWITCHING_EXTRUDER_SERVO_NR 0
+ #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
+ #if EXTRUDERS > 3
+ #define SWITCHING_EXTRUDER_E23_SERVO_NR 1
+ #endif
+#endif
+
+// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
+//#define SWITCHING_NOZZLE
+#if ENABLED(SWITCHING_NOZZLE)
+ #define SWITCHING_NOZZLE_SERVO_NR 0
+ #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1
+ //#define HOTEND_OFFSET_Z { 0.0, 0.0 }
+#endif
+
+/**
+ * "Mixing Extruder"
+ * - Adds a new code, M165, to set the current mix factors.
+ * - Extends the stepping routines to move multiple steppers in proportion to the mix.
+ * - Optional support for Repetier Firmware M163, M164, and virtual extruder.
+ * - This implementation supports only a single extruder.
+ * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation
+ */
+//#define MIXING_EXTRUDER
+#if ENABLED(MIXING_EXTRUDER)
+ #define MIXING_STEPPERS 3 // Number of steppers in your mixing extruder
+ #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164
+ //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands
+#endif
+
+// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
+// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
+// For the other hotends it is their distance from the extruder 0 hotend.
+//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis
+//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis
+
+// @section machine
+
+/**
+ * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ *
+ * 0 = No Power Switch
+ * 1 = ATX
+ * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
+ *
+ * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ */
+#define POWER_SUPPLY 0
+
+#if POWER_SUPPLY > 0
+ // Enable this option to leave the PSU off at startup.
+ // Power to steppers and heaters will need to be turned on with M80.
+ //#define PS_DEFAULT_OFF
+#endif
+
+// @section temperature
+
+//===========================================================================
+//============================= Thermal Settings ============================
+//===========================================================================
+
+/**
+ * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
+ *
+ * Temperature sensors available:
+ *
+ * -3 : thermocouple with MAX31855 (only for sensor 0)
+ * -2 : thermocouple with MAX6675 (only for sensor 0)
+ * -1 : thermocouple with AD595
+ * 0 : not used
+ * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
+ * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
+ * 3 : Mendel-parts thermistor (4.7k pullup)
+ * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
+ * 5 : 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
+ * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
+ * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
+ * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
+ * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
+ * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
+ * 10 : 100k RS thermistor 198-961 (4.7k pullup)
+ * 11 : 100k beta 3950 1% thermistor (4.7k pullup)
+ * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
+ * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ * 20 : the PT100 circuit found in the Ultimainboard V2.x
+ * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 66 : 4.7M High Temperature thermistor from Dyze Design
+ * 70 : the 100K thermistor found in the bq Hephestos 2
+ * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
+ *
+ * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
+ * (but gives greater accuracy and more stable PID)
+ * 51 : 100k thermistor - EPCOS (1k pullup)
+ * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
+ * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
+ *
+ * 1047 : Pt1000 with 4k7 pullup
+ * 1010 : Pt1000 with 1k pullup (non standard)
+ * 147 : Pt100 with 4k7 pullup
+ * 110 : Pt100 with 1k pullup (non standard)
+ *
+ * Use these for Testing or Development purposes. NEVER for production machine.
+ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
+ * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
+ *
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ */
+#warning temp_sensor set to 998/999 (fake)
+#define TEMP_SENSOR_0 999
+#define TEMP_SENSOR_1 0
+#define TEMP_SENSOR_2 0
+#define TEMP_SENSOR_3 0
+#define TEMP_SENSOR_4 0
+#define TEMP_SENSOR_BED 998
+
+// Dummy thermistor constant temperature readings, for use with 998 and 999
+#define DUMMY_THERMISTOR_998_VALUE 60
+#define DUMMY_THERMISTOR_999_VALUE 205
+
+// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
+// from the two sensors differ too much the print will be aborted.
+//#define TEMP_SENSOR_1_AS_REDUNDANT
+#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
+
+// Extruder temperature must be close to target for this long before M109 returns success
+#define TEMP_RESIDENCY_TIME 10 // (seconds)
+#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one
+#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early.
+
+// Bed temperature must be close to target for this long before M190 returns success
+#define TEMP_BED_RESIDENCY_TIME 10 // (seconds)
+#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one
+#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early.
+
+// The minimal temperature defines the temperature below which the heater will not be enabled It is used
+// to check that the wiring to the thermistor is not broken.
+// Otherwise this would lead to the heater being powered on all the time.
+#define HEATER_0_MINTEMP 5
+#define HEATER_1_MINTEMP 5
+#define HEATER_2_MINTEMP 5
+#define HEATER_3_MINTEMP 5
+#define HEATER_4_MINTEMP 5
+#define BED_MINTEMP 5
+
+// When temperature exceeds max temp, your heater will be switched off.
+// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure!
+// You should use MINTEMP for thermistor short/failure protection.
+#define HEATER_0_MAXTEMP 275
+#define HEATER_1_MAXTEMP 275
+#define HEATER_2_MAXTEMP 275
+#define HEATER_3_MAXTEMP 275
+#define HEATER_4_MAXTEMP 275
+#define BED_MAXTEMP 150
+
+//===========================================================================
+//============================= PID Settings ================================
+//===========================================================================
+// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning
+
+// Comment the following line to disable PID and enable bang-bang.
+#define PIDTEMP
+#define BANG_MAX 180 // limits current to nozzle while in bang-bang mode; 255=full current
+#define PID_MAX BANG_MAX // limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
+#if ENABLED(PIDTEMP)
+ #define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result.
+ //#define PID_DEBUG // Sends debug data to the serial port.
+ //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
+ //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
+ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
+ // Set/get with gcode: M301 E[extruder number, 0-2]
+ #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
+ // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
+ #define K1 0.95 //smoothing factor within the PID
+
+ // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
+
+ // Ultimaker
+ #define DEFAULT_Kp 22.2
+ #define DEFAULT_Ki 1.08
+ #define DEFAULT_Kd 114
+
+ // MakerGear
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
+
+ // Mendel Parts V9 on 12V
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
+
+#endif // PIDTEMP
+
+//===========================================================================
+//============================= PID > Bed Temperature Control ===============
+//===========================================================================
+// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
+//
+// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder.
+// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz,
+// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating.
+// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater.
+// If your configuration is significantly different than this and you don't understand the issues involved, you probably
+// shouldn't use bed PID until someone else verifies your hardware works.
+// If this is enabled, find your own PID constants below.
+//#define PIDTEMPBED
+
+//#define BED_LIMIT_SWITCHING
+
+// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option.
+// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis)
+// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did,
+// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED)
+#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
+
+#if ENABLED(PIDTEMPBED)
+
+ //#define PID_BED_DEBUG // Sends debug data to the serial port.
+
+ //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
+ //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
+
+ //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
+ //from pidautotune
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
+
+ // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
+#endif // PIDTEMPBED
+
+// @section extruder
+
+// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP.
+// It also enables the M302 command to set the minimum extrusion temperature
+// or to allow moving the extruder regardless of the hotend temperature.
+// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! ***
+#define PREVENT_COLD_EXTRUSION
+#define EXTRUDE_MINTEMP 170
+
+// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH.
+// Note that for Bowden Extruders a too-small value here may prevent loading.
+#define PREVENT_LENGTHY_EXTRUDE
+#define EXTRUDE_MAXLENGTH 200
+
+//===========================================================================
+//======================== Thermal Runaway Protection =======================
+//===========================================================================
+
+/**
+ * Thermal Protection protects your printer from damage and fire if a
+ * thermistor falls out or temperature sensors fail in any way.
+ *
+ * The issue: If a thermistor falls out or a temperature sensor fails,
+ * Marlin can no longer sense the actual temperature. Since a disconnected
+ * thermistor reads as a low temperature, the firmware will keep the heater on.
+ *
+ * If you get "Thermal Runaway" or "Heating failed" errors the
+ * details can be tuned in Configuration_adv.h
+ */
+
+#warning "disabled temperature protection"
+//#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
+//#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
+
+//===========================================================================
+//============================= Mechanical Settings =========================
+//===========================================================================
+
+// @section machine
+
+// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics
+// either in the usual order or reversed
+//#define COREXY
+//#define COREXZ
+//#define COREYZ
+//#define COREYX
+//#define COREZX
+//#define COREZY
+
+//===========================================================================
+//============================== Endstop Settings ===========================
+//===========================================================================
+
+// @section homing
+
+// Specify here all the endstop connectors that are connected to any endstop or probe.
+// Almost all printers will be using one per axis. Probes will use one or more of the
+// extra connectors. Leave undefined any used for non-endstop and non-probe purposes.
+#define USE_XMIN_PLUG
+#define USE_YMIN_PLUG
+#define USE_ZMIN_PLUG
+//#define USE_XMAX_PLUG
+//#define USE_YMAX_PLUG
+//#define USE_ZMAX_PLUG
+
+// coarse Endstop Settings
+#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
+
+#if DISABLED(ENDSTOPPULLUPS)
+ // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
+ //#define ENDSTOPPULLUP_XMAX
+ //#define ENDSTOPPULLUP_YMAX
+ //#define ENDSTOPPULLUP_ZMAX
+ //#define ENDSTOPPULLUP_XMIN
+ //#define ENDSTOPPULLUP_YMIN
+ //#define ENDSTOPPULLUP_ZMIN
+ //#define ENDSTOPPULLUP_ZMIN_PROBE
+#endif
+
+// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
+#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
+#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
+#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
+
+// Enable this feature if all enabled endstop pins are interrupt-capable.
+// This will remove the need to poll the interrupt pins, saving many CPU cycles.
+//#define ENDSTOP_INTERRUPTS_FEATURE
+
+//=============================================================================
+//============================== Movement Settings ============================
+//=============================================================================
+// @section motion
+
+/**
+ * Default Settings
+ *
+ * These settings can be reset by M502
+ *
+ * Note that if EEPROM is enabled, saved values will override these.
+ */
+
+/**
+ * With this option each E stepper can have its own factors for the
+ * following movement settings. If fewer factors are given than the
+ * total number of extruders, the last value applies to the rest.
+ */
+//#define DISTINCT_E_FACTORS
+
+/**
+ * Default Axis Steps Per Unit (steps/mm)
+ * Override with M92
+ * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
+ */
+#define DEFAULT_AXIS_STEPS_PER_UNIT { 78.74, 78.74, 2560, 105.0 }
+
+/**
+ * Default Max Feed Rate (mm/s)
+ * Override with M203
+ * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
+ */
+#define DEFAULT_MAX_FEEDRATE { 400, 400, 2, 45 }
+
+/**
+ * Default Max Acceleration (change/s) change = mm/s
+ * (Maximum start speed for accelerated moves)
+ * Override with M201
+ * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
+ */
+#define DEFAULT_MAX_ACCELERATION { 1400, 1400, 100, 80000 }
+
+/**
+ * Default Acceleration (change/s) change = mm/s
+ * Override with M204
+ *
+ * M204 P Acceleration
+ * M204 R Retract Acceleration
+ * M204 T Travel Acceleration
+ */
+#define DEFAULT_ACCELERATION 1400 // X, Y, Z and E acceleration for printing moves
+#define DEFAULT_RETRACT_ACCELERATION 5000 // E acceleration for retracts
+#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+
+/**
+ * Default Jerk (mm/s)
+ * Override with M205 X Y Z EM
+ *
+ * "Jerk" specifies the minimum speed change that requires acceleration.
+ * When changing speed and direction, if the difference is less than the
+ * value set here, it may happen instantaneously.
+ */
+#define DEFAULT_XJERK 13.0
+#define DEFAULT_YJERK 13.0
+#define DEFAULT_ZJERK 0.3
+#define DEFAULT_EJERK 5.0
+
+
+//===========================================================================
+//============================= Z Probe Options =============================
+//===========================================================================
+// @section probes
+
+//
+// See http://marlinfw.org/configuration/probes.html
+//
+
+/**
+ * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
+ *
+ * Enable this option for a probe connected to the Z Min endstop pin.
+ */
+#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
+
+/**
+ * Z_MIN_PROBE_ENDSTOP
+ *
+ * Enable this option for a probe connected to any pin except Z-Min.
+ * (By default Marlin assumes the Z-Max endstop pin.)
+ * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below.
+ *
+ * - The simplest option is to use a free endstop connector.
+ * - Use 5V for powered (usually inductive) sensors.
+ *
+ * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin:
+ * - For simple switches connect...
+ * - normally-closed switches to GND and D32.
+ * - normally-open switches to 5V and D32.
+ *
+ * WARNING: Setting the wrong pin may have unexpected and potentially
+ * disastrous consequences. Use with caution and do your homework.
+ *
+ */
+//#define Z_MIN_PROBE_ENDSTOP
+
+/**
+ * Probe Type
+ *
+ * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc.
+ * You must activate one of these to use Auto Bed Leveling below.
+ */
+
+/**
+ * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe.
+ * Use G29 repeatedly, adjusting the Z height at each point with movement commands
+ * or (with LCD_BED_LEVELING) the LCD controller.
+ */
+//#define PROBE_MANUALLY
+
+/**
+ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment.
+ * (e.g., an inductive probe or a nozzle-based probe-switch.)
+ */
+//#define FIX_MOUNTED_PROBE
+
+/**
+ * Z Servo Probe, such as an endstop switch on a rotating arm.
+ */
+//#define Z_ENDSTOP_SERVO_NR 0 // Defaults to SERVO 0 connector.
+//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
+
+/**
+ * The BLTouch probe uses a Hall effect sensor and emulates a servo.
+ */
+//#define BLTOUCH
+#if ENABLED(BLTOUCH)
+ //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+#endif
+
+/**
+ * Enable if probing seems unreliable. Heaters and/or fans - consistent with the
+ * options selected below - will be disabled during probing so as to minimize
+ * potential EM interference by quieting/silencing the source of the 'noise' (the change
+ * in current flowing through the wires). This is likely most useful to users of the
+ * BLTouch probe, but may also help those with inductive or other probe types.
+ */
+//#define PROBING_HEATERS_OFF // Turn heaters off when probing
+//#define PROBING_FANS_OFF // Turn fans off when probing
+
+// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
+//#define SOLENOID_PROBE
+
+// A sled-mounted probe like those designed by Charles Bell.
+//#define Z_PROBE_SLED
+//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
+
+//
+// For Z_PROBE_ALLEN_KEY see the Delta example configurations.
+//
+
+/**
+ * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
+ * X and Y offsets must be integers.
+ *
+ * In the following example the X and Y offsets are both positive:
+ * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ *
+ * +-- BACK ---+
+ * | |
+ * L | (+) P | R <-- probe (20,20)
+ * E | | I
+ * F | (-) N (+) | G <-- nozzle (10,10)
+ * T | | H
+ * | (-) | T
+ * | |
+ * O-- FRONT --+
+ * (0,0)
+ */
+#define X_PROBE_OFFSET_FROM_EXTRUDER -25 // X offset: -left +right [of the nozzle]
+#define Y_PROBE_OFFSET_FROM_EXTRUDER -29 // Y offset: -front +behind [the nozzle]
+#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35 // Z offset: -below +above [the nozzle]
+
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
+// Speed for the first approach when double-probing (with PROBE_DOUBLE_TOUCH)
+#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
+
+// Speed for the "accurate" probe of each point
+#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
+
+// Use double touch for probing
+//#define PROBE_DOUBLE_TOUCH
+
+/**
+ * Z probes require clearance when deploying, stowing, and moving between
+ * probe points to avoid hitting the bed and other hardware.
+ * Servo-mounted probes require extra space for the arm to rotate.
+ * Inductive probes need space to keep from triggering early.
+ *
+ * Use these settings to specify the distance (mm) to raise the probe (or
+ * lower the bed). The values set here apply over and above any (negative)
+ * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD.
+ * Only integer values >= 1 are valid here.
+ *
+ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle.
+ * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle.
+ */
+#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
+#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
+
+// For M851 give a range for adjusting the Z probe offset
+#define Z_PROBE_OFFSET_RANGE_MIN -20
+#define Z_PROBE_OFFSET_RANGE_MAX 20
+
+// Enable the M48 repeatability test to test probe accuracy
+//#define Z_MIN_PROBE_REPEATABILITY_TEST
+
+// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
+// :{ 0:'Low', 1:'High' }
+#define X_ENABLE_ON 0
+#define Y_ENABLE_ON 0
+#define Z_ENABLE_ON 0
+#define E_ENABLE_ON 0 // For all extruders
+
+// Disables axis stepper immediately when it's not being used.
+// WARNING: When motors turn off there is a chance of losing position accuracy!
+#define DISABLE_X false
+#define DISABLE_Y false
+#define DISABLE_Z false
+// Warn on display about possibly reduced accuracy
+//#define DISABLE_REDUCED_ACCURACY_WARNING
+
+// @section extruder
+
+#define DISABLE_E false // For all extruders
+#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled.
+
+// @section machine
+
+// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
+#define INVERT_X_DIR false
+#define INVERT_Y_DIR true
+#define INVERT_Z_DIR false
+
+// Enable this option for Toshiba stepper drivers
+//#define CONFIG_STEPPERS_TOSHIBA
+
+// @section extruder
+
+// For direct drive extruder v9 set to true, for geared extruder set to false.
+#define INVERT_E0_DIR true
+#define INVERT_E1_DIR false
+#define INVERT_E2_DIR false
+#define INVERT_E3_DIR false
+#define INVERT_E4_DIR false
+
+// @section homing
+
+//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
+ // Be sure you have this distance over your Z_MAX_POS in case.
+
+// Direction of endstops when homing; 1=MAX, -1=MIN
+// :[-1,1]
+#define X_HOME_DIR -1
+#define Y_HOME_DIR -1
+#define Z_HOME_DIR -1
+
+// @section machine
+
+// The size of the print bed
+#define X_BED_SIZE 200
+#define Y_BED_SIZE 200
+
+// Travel limits (mm) after homing, corresponding to endstop positions.
+#define X_MIN_POS 0
+#define Y_MIN_POS 0
+#define Z_MIN_POS 0
+#define X_MAX_POS X_BED_SIZE
+#define Y_MAX_POS Y_BED_SIZE
+#define Z_MAX_POS 180
+
+// If enabled, axes won't move below MIN_POS in response to movement commands.
+#define MIN_SOFTWARE_ENDSTOPS
+// If enabled, axes won't move above MAX_POS in response to movement commands.
+#define MAX_SOFTWARE_ENDSTOPS
+
+/**
+ * Filament Runout Sensor
+ * A mechanical or opto endstop is used to check for the presence of filament.
+ *
+ * RAMPS-based boards use SERVO3_PIN.
+ * For other boards you may need to define FIL_RUNOUT_PIN.
+ * By default the firmware assumes HIGH = has filament, LOW = ran out
+ */
+//#define FILAMENT_RUNOUT_SENSOR
+#if ENABLED(FILAMENT_RUNOUT_SENSOR)
+ #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
+ #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
+ #define FILAMENT_RUNOUT_SCRIPT "M600"
+#endif
+
+//===========================================================================
+//=============================== Bed Leveling ==============================
+//===========================================================================
+// @section bedlevel
+
+/**
+ * Choose one of the options below to enable G29 Bed Leveling. The parameters
+ * and behavior of G29 will change depending on your selection.
+ *
+ * If using a Probe for Z Homing, enable Z_SAFE_HOMING also!
+ *
+ * - AUTO_BED_LEVELING_3POINT
+ * Probe 3 arbitrary points on the bed (that aren't collinear)
+ * You specify the XY coordinates of all 3 points.
+ * The result is a single tilted plane. Best for a flat bed.
+ *
+ * - AUTO_BED_LEVELING_LINEAR
+ * Probe several points in a grid.
+ * You specify the rectangle and the density of sample points.
+ * The result is a single tilted plane. Best for a flat bed.
+ *
+ * - AUTO_BED_LEVELING_BILINEAR
+ * Probe several points in a grid.
+ * You specify the rectangle and the density of sample points.
+ * The result is a mesh, best for large or uneven beds.
+ *
+ * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
+ * A comprehensive bed leveling system combining the features and benefits
+ * of other systems. UBL also includes integrated Mesh Generation, Mesh
+ * Validation and Mesh Editing systems. Currently, UBL is only checked out
+ * for Cartesian Printers. That said, it was primarily designed to correct
+ * poor quality Delta Printers. If you feel adventurous and have a Delta,
+ * please post an issue if something doesn't work correctly. Initially,
+ * you will need to set a reduced bed size so you have a rectangular area
+ * to test on.
+ *
+ * - MESH_BED_LEVELING
+ * Probe a grid manually
+ * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.)
+ * For machines without a probe, Mesh Bed Leveling provides a method to perform
+ * leveling in steps so you can manually adjust the Z height at each grid-point.
+ * With an LCD controller the process is guided step-by-step.
+ */
+//#define AUTO_BED_LEVELING_3POINT
+//#define AUTO_BED_LEVELING_LINEAR
+//#define AUTO_BED_LEVELING_BILINEAR
+//#define AUTO_BED_LEVELING_UBL
+//#define MESH_BED_LEVELING
+
+/**
+ * Enable detailed logging of G28, G29, M48, etc.
+ * Turn on with the command 'M111 S32'.
+ * NOTE: Requires a lot of PROGMEM!
+ */
+//#define DEBUG_LEVELING_FEATURE
+
+#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+ // Gradually reduce leveling correction until a set height is reached,
+ // at which point movement will be level to the machine's XY plane.
+ // The height can be set with M420 Z
+ #define ENABLE_LEVELING_FADE_HEIGHT
+#endif
+
+#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+
+ // Set the number of grid points per dimension.
+ #define GRID_MAX_POINTS_X 3
+ #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
+
+ // Set the boundaries for probing (where the probe can reach).
+ #define LEFT_PROBE_BED_POSITION 15
+ #define RIGHT_PROBE_BED_POSITION 170
+ #define FRONT_PROBE_BED_POSITION 20
+ #define BACK_PROBE_BED_POSITION 170
+
+ // The Z probe minimum outer margin (to validate G29 parameters).
+ #define MIN_PROBE_EDGE 10
+
+ // Probe along the Y axis, advancing X after each column
+ //#define PROBE_Y_FIRST
+
+ #if ENABLED(AUTO_BED_LEVELING_BILINEAR)
+
+ // Beyond the probed grid, continue the implied tilt?
+ // Default is to maintain the height of the nearest edge.
+ //#define EXTRAPOLATE_BEYOND_GRID
+
+ //
+ // Experimental Subdivision of the grid by Catmull-Rom method.
+ // Synthesizes intermediate points to produce a more detailed mesh.
+ //
+ //#define ABL_BILINEAR_SUBDIVISION
+ #if ENABLED(ABL_BILINEAR_SUBDIVISION)
+ // Number of subdivisions between probe points
+ #define BILINEAR_SUBDIVISIONS 3
+ #endif
+
+ #endif
+
+#elif ENABLED(AUTO_BED_LEVELING_3POINT)
+
+ // 3 arbitrary points to probe.
+ // A simple cross-product is used to estimate the plane of the bed.
+ #define ABL_PROBE_PT_1_X 15
+ #define ABL_PROBE_PT_1_Y 180
+ #define ABL_PROBE_PT_2_X 15
+ #define ABL_PROBE_PT_2_Y 20
+ #define ABL_PROBE_PT_3_X 170
+ #define ABL_PROBE_PT_3_Y 20
+
+#elif ENABLED(AUTO_BED_LEVELING_UBL)
+
+ //===========================================================================
+ //========================= Unified Bed Leveling ============================
+ //===========================================================================
+
+ #define UBL_MESH_INSET 1 // Mesh inset margin on print area
+ #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
+ #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
+
+ #define UBL_PROBE_PT_1_X 39 // Probing points for 3-Point leveling of the mesh
+ #define UBL_PROBE_PT_1_Y 180
+ #define UBL_PROBE_PT_2_X 39
+ #define UBL_PROBE_PT_2_Y 20
+ #define UBL_PROBE_PT_3_X 180
+ #define UBL_PROBE_PT_3_Y 20
+
+ #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation
+ #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
+
+#elif ENABLED(MESH_BED_LEVELING)
+
+ //===========================================================================
+ //=================================== Mesh ==================================
+ //===========================================================================
+
+ #define MESH_INSET 10 // Mesh inset margin on print area
+ #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited.
+ #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
+
+ //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
+
+#endif // BED_LEVELING
+
+/**
+ * Use the LCD controller for bed leveling
+ * Requires MESH_BED_LEVELING or PROBE_MANUALLY
+ */
+//#define LCD_BED_LEVELING
+
+#if ENABLED(LCD_BED_LEVELING)
+ #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis.
+ #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
+#endif
+
+/**
+ * Commands to execute at the end of G29 probing.
+ * Useful to retract or move the Z probe out of the way.
+ */
+//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10"
+
+
+// @section homing
+
+// The center of the bed is at (X=0, Y=0)
+//#define BED_CENTER_AT_0_0
+
+// Manually set the home position. Leave these undefined for automatic settings.
+// For DELTA this is the top-center of the Cartesian print volume.
+//#define MANUAL_X_HOME_POS 0
+//#define MANUAL_Y_HOME_POS 0
+//#define MANUAL_Z_HOME_POS 0
+
+// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
+//
+// With this feature enabled:
+//
+// - Allow Z homing only after X and Y homing AND stepper drivers still enabled.
+// - If stepper drivers time out, it will need X and Y homing again before Z homing.
+// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
+// - Prevent Z homing when the Z probe is outside bed area.
+//
+//#define Z_SAFE_HOMING
+
+#if ENABLED(Z_SAFE_HOMING)
+ #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axis (G28).
+ #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axis (G28).
+#endif
+
+// Homing speeds (mm/m)
+#define HOMING_FEEDRATE_XY (50*60)
+#define HOMING_FEEDRATE_Z (4*60)
+
+//=============================================================================
+//============================= Additional Features ===========================
+//=============================================================================
+
+// @section extras
+
+//
+// EEPROM
+//
+// The microcontroller can store settings in the EEPROM, e.g. max velocity...
+// M500 - stores parameters in EEPROM
+// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
+// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
+//
+#define EEPROM_SETTINGS // Enable for M500 and M501 commands
+//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
+//#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
+
+//
+// Host Keepalive
+//
+// When enabled Marlin will send a busy status message to the host
+// every couple of seconds when it can't accept commands.
+//
+#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages
+#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
+#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
+
+//
+// M100 Free Memory Watcher
+//
+#define M100_FREE_MEMORY_WATCHER // uncomment to add the M100 Free Memory Watcher for debug purpose
+
+//
+// G20/G21 Inch mode support
+//
+//#define INCH_MODE_SUPPORT
+
+//
+// M149 Set temperature units support
+//
+#define TEMPERATURE_UNITS_SUPPORT
+
+// @section temperature
+
+// Preheat Constants
+#define PREHEAT_1_TEMP_HOTEND 200
+#define PREHEAT_1_TEMP_BED 60
+#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
+
+#define PREHEAT_2_TEMP_HOTEND 220
+#define PREHEAT_2_TEMP_BED 100
+#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
+
+/**
+ * Nozzle Park -- EXPERIMENTAL
+ *
+ * Park the nozzle at the given XYZ position on idle or G27.
+ *
+ * The "P" parameter controls the action applied to the Z axis:
+ *
+ * P0 (Default) If Z is below park Z raise the nozzle.
+ * P1 Raise the nozzle always to Z-park height.
+ * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
+ */
+//#define NOZZLE_PARK_FEATURE
+
+#if ENABLED(NOZZLE_PARK_FEATURE)
+ // Specify a park position as { X, Y, Z }
+ #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+#endif
+
+/**
+ * Clean Nozzle Feature -- EXPERIMENTAL
+ *
+ * Adds the G12 command to perform a nozzle cleaning process.
+ *
+ * Parameters:
+ * P Pattern
+ * S Strokes / Repetitions
+ * T Triangles (P1 only)
+ *
+ * Patterns:
+ * P0 Straight line (default). This process requires a sponge type material
+ * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
+ * between the start / end points.
+ *
+ * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
+ * number of zig-zag triangles to do. "S" defines the number of strokes.
+ * Zig-zags are done in whichever is the narrower dimension.
+ * For example, "G12 P1 S1 T3" will execute:
+ *
+ * --
+ * | (X0, Y1) | /\ /\ /\ | (X1, Y1)
+ * | | / \ / \ / \ |
+ * A | | / \ / \ / \ |
+ * | | / \ / \ / \ |
+ * | (X0, Y0) | / \/ \/ \ | (X1, Y0)
+ * -- +--------------------------------+
+ * |________|_________|_________|
+ * T1 T2 T3
+ *
+ * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
+ * "R" specifies the radius. "S" specifies the stroke count.
+ * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
+ *
+ * Caveats: The ending Z should be the same as starting Z.
+ * Attention: EXPERIMENTAL. G-code arguments may change.
+ *
+ */
+//#define NOZZLE_CLEAN_FEATURE
+
+#if ENABLED(NOZZLE_CLEAN_FEATURE)
+ // Default number of pattern repetitions
+ #define NOZZLE_CLEAN_STROKES 12
+
+ // Default number of triangles
+ #define NOZZLE_CLEAN_TRIANGLES 3
+
+ // Specify positions as { X, Y, Z }
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
+
+ // Circular pattern radius
+ #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
+ // Circular pattern circle fragments number
+ #define NOZZLE_CLEAN_CIRCLE_FN 10
+ // Middle point of circle
+ #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT
+
+ // Moves the nozzle to the initial position
+ #define NOZZLE_CLEAN_GOBACK
+#endif
+
+/**
+ * Print Job Timer
+ *
+ * Automatically start and stop the print job timer on M104/M109/M190.
+ *
+ * M104 (hotend, no wait) - high temp = none, low temp = stop timer
+ * M109 (hotend, wait) - high temp = start timer, low temp = stop timer
+ * M190 (bed, wait) - high temp = start timer, low temp = none
+ *
+ * The timer can also be controlled with the following commands:
+ *
+ * M75 - Start the print job timer
+ * M76 - Pause the print job timer
+ * M77 - Stop the print job timer
+ */
+#define PRINTJOB_TIMER_AUTOSTART
+
+/**
+ * Print Counter
+ *
+ * Track statistical data such as:
+ *
+ * - Total print jobs
+ * - Total successful print jobs
+ * - Total failed print jobs
+ * - Total time printing
+ *
+ * View the current statistics with M78.
+ */
+//#define PRINTCOUNTER
+
+//=============================================================================
+//============================= LCD and SD support ============================
+//=============================================================================
+
+// @section lcd
+
+/**
+ * LCD LANGUAGE
+ *
+ * Select the language to display on the LCD. These languages are available:
+ *
+ * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, eu, fi, fr, gl, hr,
+ * it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk,
+ * zh_CN, zh_TW, test
+ *
+ * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' }
+ */
+#define LCD_LANGUAGE en
+
+/**
+ * LCD Character Set
+ *
+ * Note: This option is NOT applicable to Graphical Displays.
+ *
+ * All character-based LCDs provide ASCII plus one of these
+ * language extensions:
+ *
+ * - JAPANESE ... the most common
+ * - WESTERN ... with more accented characters
+ * - CYRILLIC ... for the Russian language
+ *
+ * To determine the language extension installed on your controller:
+ *
+ * - Compile and upload with LCD_LANGUAGE set to 'test'
+ * - Click the controller to view the LCD menu
+ * - The LCD will display Japanese, Western, or Cyrillic text
+ *
+ * See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
+ *
+ * :['JAPANESE', 'WESTERN', 'CYRILLIC']
+ */
+#define DISPLAY_CHARSET_HD44780 JAPANESE
+
+/**
+ * LCD TYPE
+ *
+ * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
+ * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
+ * (These options will be enabled automatically for most displays.)
+ *
+ * IMPORTANT: The U8glib library is required for Full Graphic Display!
+ * https://github.com/olikraus/U8glib_Arduino
+ */
+//#define ULTRA_LCD // Character based
+//#define DOGLCD // Full graphics display
+
+/**
+ * SD CARD
+ *
+ * SD Card support is disabled by default. If your controller has an SD slot,
+ * you must uncomment the following option or it won't work.
+ *
+ */
+#define SDSUPPORT
+
+/**
+ * SD CARD: SPI SPEED
+ *
+ * Enable one of the following items for a slower SPI transfer speed.
+ * This may be required to resolve "volume init" errors.
+ */
+//#define SPI_SPEED SPI_HALF_SPEED
+//#define SPI_SPEED SPI_QUARTER_SPEED
+//#define SPI_SPEED SPI_EIGHTH_SPEED
+
+/**
+ * SD CARD: ENABLE CRC
+ *
+ * Use CRC checks and retries on the SD communication.
+ */
+//#define SD_CHECK_AND_RETRY
+
+//
+// ENCODER SETTINGS
+//
+// This option overrides the default number of encoder pulses needed to
+// produce one step. Should be increased for high-resolution encoders.
+//
+//#define ENCODER_PULSES_PER_STEP 1
+
+//
+// Use this option to override the number of step signals required to
+// move between next/prev menu items.
+//
+//#define ENCODER_STEPS_PER_MENU_ITEM 5
+
+/**
+ * Encoder Direction Options
+ *
+ * Test your encoder's behavior first with both options disabled.
+ *
+ * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION.
+ * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION.
+ * Reversed Value Editing only? Enable BOTH options.
+ */
+
+//
+// This option reverses the encoder direction everywhere.
+//
+// Set this option if CLOCKWISE causes values to DECREASE
+//
+//#define REVERSE_ENCODER_DIRECTION
+
+//
+// This option reverses the encoder direction for navigating LCD menus.
+//
+// If CLOCKWISE normally moves DOWN this makes it go UP.
+// If CLOCKWISE normally moves UP this makes it go DOWN.
+//
+//#define REVERSE_MENU_DIRECTION
+
+//
+// Individual Axis Homing
+//
+// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu.
+//
+//#define INDIVIDUAL_AXIS_HOMING_MENU
+
+//
+// SPEAKER/BUZZER
+//
+// If you have a speaker that can produce tones, enable it here.
+// By default Marlin assumes you have a buzzer with a fixed frequency.
+//
+//#define SPEAKER
+
+//
+// The duration and frequency for the UI feedback sound.
+// Set these to 0 to disable audio feedback in the LCD menus.
+//
+// Note: Test audio output with the G-Code:
+// M300 S P
+//
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
+//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+
+//
+// CONTROLLER TYPE: Standard
+//
+// Marlin supports a wide variety of controllers.
+// Enable one of the following options to specify your controller.
+//
+
+//
+// ULTIMAKER Controller.
+//
+//#define ULTIMAKERCONTROLLER
+
+//
+// ULTIPANEL as seen on Thingiverse.
+//
+//#define ULTIPANEL
+
+//
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
+// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
+// http://reprap.org/wiki/PanelOne
+//
+//#define PANEL_ONE
+
+//
+// MaKr3d Makr-Panel with graphic controller and SD support.
+// http://reprap.org/wiki/MaKr3d_MaKrPanel
+//
+//#define MAKRPANEL
+
+//
+// ReprapWorld Graphical LCD
+// https://reprapworld.com/?products_details&products_id/1218
+//
+//#define REPRAPWORLD_GRAPHICAL_LCD
+
+//
+// Activate one of these if you have a Panucatt Devices
+// Viki 2.0 or mini Viki with Graphic LCD
+// http://panucatt.com
+//
+//#define VIKI2
+//#define miniVIKI
+
+//
+// Adafruit ST7565 Full Graphic Controller.
+// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
+//
+//#define ELB_FULL_GRAPHIC_CONTROLLER
+
+//
+// RepRapDiscount Smart Controller.
+// http://reprap.org/wiki/RepRapDiscount_Smart_Controller
+//
+// Note: Usually sold with a white PCB.
+//
+//#define REPRAP_DISCOUNT_SMART_CONTROLLER
+
+//
+// GADGETS3D G3D LCD/SD Controller
+// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel
+//
+// Note: Usually sold with a blue PCB.
+//
+//#define G3D_PANEL
+
+//
+// RepRapDiscount FULL GRAPHIC Smart Controller
+// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
+//
+//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+
+//
+// MakerLab Mini Panel with graphic
+// controller and SD support - http://reprap.org/wiki/Mini_panel
+//
+//#define MINIPANEL
+
+//
+// RepRapWorld REPRAPWORLD_KEYPAD v1.1
+// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
+//
+// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key
+// is pressed, a value of 10.0 means 10mm per click.
+//
+//#define REPRAPWORLD_KEYPAD
+//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0
+
+//
+// RigidBot Panel V1.0
+// http://www.inventapart.com/
+//
+//#define RIGIDBOT_PANEL
+
+//
+// BQ LCD Smart Controller shipped by
+// default with the BQ Hephestos 2 and Witbox 2.
+//
+//#define BQ_LCD_SMART_CONTROLLER
+
+//
+// ANET_10 Controller supported displays.
+//
+//#define ANET_KEYPAD_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin.
+ // This LCD is known to be susceptible to electrical interference
+ // which scrambles the display. Pressing any button clears it up.
+//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6
+ // A clone of the RepRapDiscount full graphics display but with
+ // different pins/wiring (see pins_ANET_10.h).
+
+//
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
+// CONTROLLER TYPE: I2C
+//
+// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
+// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C
+//
+
+//
+// Elefu RA Board Control Panel
+// http://www.elefu.com/index.php?route=product/product&product_id=53
+//
+//#define RA_CONTROL_PANEL
+
+//
+// Sainsmart YW Robot (LCM1602) LCD Display
+//
+// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library
+// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home
+//
+//#define LCD_I2C_SAINSMART_YWROBOT
+
+//
+// Generic LCM1602 LCD adapter
+//
+//#define LCM1602
+
+//
+// PANELOLU2 LCD with status LEDs,
+// separate encoder and click inputs.
+//
+// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later.
+// For more info: https://github.com/lincomatic/LiquidTWI2
+//
+// Note: The PANELOLU2 encoder click input can either be directly connected to
+// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1).
+//
+//#define LCD_I2C_PANELOLU2
+
+//
+// Panucatt VIKI LCD with status LEDs,
+// integrated click & L/R/U/D buttons, separate encoder inputs.
+//
+//#define LCD_I2C_VIKI
+
+//
+// SSD1306 OLED full graphics generic display
+//
+//#define U8GLIB_SSD1306
+
+//
+// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
+//
+//#define SAV_3DGLCD
+#if ENABLED(SAV_3DGLCD)
+ //#define U8GLIB_SSD1306
+ #define U8GLIB_SH1106
+#endif
+
+//
+// CONTROLLER TYPE: Shift register panels
+//
+// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
+// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
+//
+//#define SAV_3DLCD
+
+//
+// TinyBoy2 128x64 OLED / Encoder Panel
+//
+//#define OLED_PANEL_TINYBOY2
+
+//=============================================================================
+//=============================== Extra Features ==============================
+//=============================================================================
+
+// @section extras
+
+// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino
+//#define FAST_PWM_FAN
+
+// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
+// which is not as annoying as with the hardware PWM. On the other hand, if this frequency
+// is too low, you should also increment SOFT_PWM_SCALE.
+//#define FAN_SOFT_PWM
+
+// Incrementing this by 1 will double the software PWM frequency,
+// affecting heaters, and the fan if FAN_SOFT_PWM is enabled.
+// However, control resolution will be halved for each increment;
+// at zero value, there are 128 effective control positions.
+#define SOFT_PWM_SCALE 0
+
+// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can
+// be used to mitigate the associated resolution loss. If enabled,
+// some of the PWM cycles are stretched so on average the desired
+// duty cycle is attained.
+//#define SOFT_PWM_DITHER
+
+// Temperature status LEDs that display the hotend and bed temperature.
+// If all hotends, bed temperature, and target temperature are under 54C
+// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
+//#define TEMP_STAT_LEDS
+
+// M240 Triggers a camera by emulating a Canon RC-1 Remote
+// Data from: http://www.doc-diy.net/photo/rc-1_hacked/
+//#define PHOTOGRAPH_PIN 23
+
+// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
+//#define SF_ARC_FIX
+
+// Support for the BariCUDA Paste Extruder
+//#define BARICUDA
+
+// Support for BlinkM/CyzRgb
+//#define BLINKM
+
+// Support for PCA9632 PWM LED driver
+//#define PCA9632
+
+/**
+ * RGB LED / LED Strip Control
+ *
+ * Enable support for an RGB LED connected to 5V digital pins, or
+ * an RGB Strip connected to MOSFETs controlled by digital pins.
+ *
+ * Adds the M150 command to set the LED (or LED strip) color.
+ * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
+ * luminance values can be set from 0 to 255.
+ *
+ * *** CAUTION ***
+ * LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ * as the Arduino cannot handle the current the LEDs will require.
+ * Failure to follow this precaution can destroy your Arduino!
+ * *** CAUTION ***
+ *
+ */
+//#define RGB_LED
+//#define RGBW_LED
+#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+ #define RGB_LED_R_PIN 34
+ #define RGB_LED_G_PIN 43
+ #define RGB_LED_B_PIN 35
+ #define RGB_LED_W_PIN -1
+#endif
+
+// Support for Adafruit Neopixel LED driver
+//#define NEOPIXEL_RGBW_LED
+#if ENABLED(NEOPIXEL_RGBW_LED)
+ #define NEOPIXEL_PIN 4 // D4 (EXP2-5 on Printrboard)
+ #define NEOPIXEL_PIXELS 3
+ //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
+#endif
+
+/**
+ * Printer Event LEDs
+ *
+ * During printing, the LEDs will reflect the printer status:
+ *
+ * - Gradually change from blue to violet as the heated bed gets to target temp
+ * - Gradually change from violet to red as the hotend gets to temperature
+ * - Change to white to illuminate work surface
+ * - Change to green once print has finished
+ * - Turn off after the print has finished and the user has pushed a button
+ */
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED)
+ #define PRINTER_EVENT_LEDS
+#endif
+
+/*********************************************************************\
+* R/C SERVO support
+* Sponsored by TrinityLabs, Reworked by codexmas
+**********************************************************************/
+
+// Number of servos
+//
+// If you select a configuration below, this will receive a default value and does not need to be set manually
+// set it manually if you have more servos than extruders and wish to manually control some
+// leaving it undefined or defining as 0 will disable the servo subsystem
+// If unsure, leave commented / disabled
+//
+//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command
+
+// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle.
+// 300ms is a good value but you can try less delay.
+// If the servo can't reach the requested position, increase it.
+#define SERVO_DELAY 300
+
+// Servo deactivation
+//
+// With this option servos are powered only during movement, then turned off to prevent jitter.
+//#define DEACTIVATE_SERVOS_AFTER_MOVE
+
+/**
+ * Filament Width Sensor
+ *
+ * Measures the filament width in real-time and adjusts
+ * flow rate to compensate for any irregularities.
+ *
+ * Also allows the measured filament diameter to set the
+ * extrusion rate, so the slicer only has to specify the
+ * volume.
+ *
+ * Only a single extruder is supported at this time.
+ *
+ * 34 RAMPS_14 : Analog input 5 on the AUX2 connector
+ * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E)
+ * 301 RAMBO : Analog input 3
+ *
+ * Note: May require analog pins to be defined for other boards.
+ */
+//#define FILAMENT_WIDTH_SENSOR
+
+#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
+
+#if ENABLED(FILAMENT_WIDTH_SENSOR)
+ #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
+ #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
+
+ #define MEASURED_UPPER_LIMIT 3.30 // (mm) Upper limit used to validate sensor reading
+ #define MEASURED_LOWER_LIMIT 1.90 // (mm) Lower limit used to validate sensor reading
+ #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM.
+
+ #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially
+
+ // Display filament width on the LCD status line. Status messages will expire after 5 seconds.
+ //#define FILAMENT_LCD_DISPLAY
+#endif
+
+#endif // CONFIGURATION_H
diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h
index f92d64eca3..693767db6d 100644
--- a/Marlin/src/core/boards.h
+++ b/Marlin/src/core/boards.h
@@ -128,6 +128,7 @@
#define BOARD_RAMPS_14_RE_ARM_EFF 1745 // Re-ARM with RAMPS 1.4 (Power outputs: Hotend, Fan0, Fan1)
#define BOARD_RAMPS_14_RE_ARM_EEF 1746 // Re-ARM with RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Fan)
#define BOARD_RAMPS_14_RE_ARM_SF 1748 // Re-ARM with RAMPS 1.4 (Power outputs: Spindle, Controller Fan)
+#define BOARD_STM32F1R 1800 // STM3R Libmaple based stm32f1 controller
#define MB(board) (MOTHERBOARD==BOARD_##board)
diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h
index 2ed0a5c81b..d53825152e 100644
--- a/Marlin/src/pins/pins.h
+++ b/Marlin/src/pins/pins.h
@@ -298,6 +298,8 @@
#include "pins_RAMPS4DUE.h"
#elif MB(ALLIGATOR)
#include "pins_ALLIGATOR_R2.h"
+#elif MB(STM32F1R)
+ #include "pins_STM32F1R.h"
#else
#error "Unknown MOTHERBOARD value set in Configuration.h"
#endif
diff --git a/Marlin/src/pins/pins_5DPRINT.h b/Marlin/src/pins/pins_5DPRINT.h
index e99047f66f..cb0dbb23fa 100755
--- a/Marlin/src/pins/pins_5DPRINT.h
+++ b/Marlin/src/pins/pins_5DPRINT.h
@@ -76,6 +76,14 @@
#define LARGE_FLASH true
+//
+// Servos
+//
+#define SERVO0_PIN 41
+#define SERVO1_PIN 42
+#define SERVO2_PIN 43
+#define SERVO3_PIN 44
+
//
// Limit Switches
//
@@ -102,7 +110,9 @@
#define E0_DIR_PIN 35 // A7
#define E0_ENABLE_PIN 11 // C1
-
+//
+// Digital Microstepping
+//
#define X_MS1_PIN 25 // B5
#define X_MS2_PIN 26 // B6
#define Y_MS1_PIN 9 // E1
diff --git a/Marlin/src/pins/pins_STM32F1R.h b/Marlin/src/pins/pins_STM32F1R.h
new file mode 100644
index 0000000000..dc9ae47e2b
--- /dev/null
+++ b/Marlin/src/pins/pins_STM32F1R.h
@@ -0,0 +1,283 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+#if !defined(__STM32F1__)
+ #error "Oops! Make sure you have an STM32F1 board selected from the 'Tools -> Boards' menu."
+#endif
+
+/**
+ * 21017 Victor Perez Marlin for stm32f1 test
+ */
+
+#define DEFAULT_MACHINE_NAME "STM32F103RET6"
+#define BOARD_NAME "Marlin for STM32"
+
+#define LARGE_FLASH true
+
+// Ignore temp readings during develpment.
+#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
+
+//
+// Steppers
+//
+#define X_STEP_PIN PC0
+#define X_DIR_PIN PC1
+#define X_ENABLE_PIN PA8
+#define X_MIN_PIN PB3
+#define X_MAX_PIN -1
+
+#define Y_STEP_PIN PC2
+#define Y_DIR_PIN PC3
+#define Y_ENABLE_PIN PA8
+#define Y_MIN_PIN -1
+#define Y_MAX_PIN PB4
+
+#define Z_STEP_PIN PC4
+#define Z_DIR_PIN PC5
+#define Z_ENABLE_PIN PA8
+#define Z_MIN_PIN -1
+#define Z_MAX_PIN PB5
+
+#define Y2_STEP_PIN -1
+#define Y2_DIR_PIN -1
+#define Y2_ENABLE_PIN -1
+
+#define Z2_STEP_PIN -1
+#define Z2_DIR_PIN -1
+#define Z2_ENABLE_PIN -1
+
+#define E0_STEP_PIN PC6
+#define E0_DIR_PIN PC7
+#define E0_ENABLE_PIN PA8
+
+/**
+ * TODO: Currently using same Enable pin to all steppers.
+ */
+
+#define E1_STEP_PIN PC8
+#define E1_DIR_PIN PC9
+#define E1_ENABLE_PIN PA8
+
+#define E2_STEP_PIN PC10
+#define E2_DIR_PIN PC11
+#define E2_ENABLE_PIN PA8
+
+//
+// Misc. Functions
+//
+#define SDPOWER -1
+#define SDSS PA4
+#define LED_PIN PD2
+
+#define PS_ON_PIN -1
+#define KILL_PIN -1
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN PB0 // EXTRUDER 1
+#define HEATER_1_PIN PB1
+#define HEATER_2_PIN -1
+
+#define HEATER_BED_PIN PA3 // BED
+#define HEATER_BED2_PIN -1 // BED2
+#define HEATER_BED3_PIN -1 // BED3
+
+#define FAN_PIN -1 // (Sprinter config)
+
+//
+// Temperature Sensors
+//
+#define TEMP_BED_PIN PA0 // ANALOG NUMBERING
+#define TEMP_0_PIN PA1 // ANALOG NUMBERING
+#define TEMP_1_PIN PA2 // ANALOG NUMBERING
+#define TEMP_2_PIN -1 // ANALOG NUMBERING
+
+//
+// LCD Pins
+//
+#if ENABLED(ULTRA_LCD)
+
+ #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
+ #define LCD_PINS_RS 49 // CS chip select /SS chip slave select
+ #define LCD_PINS_ENABLE 51 // SID (MOSI)
+ #define LCD_PINS_D4 52 // SCK (CLK) clock
+ #elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE)
+ #define LCD_PINS_RS PB8
+ #define LCD_PINS_ENABLE PD2
+ #define LCD_PINS_D4 PB12
+ #define LCD_PINS_D5 PB13
+ #define LCD_PINS_D6 PB14
+ #define LCD_PINS_D7 PB15
+ #else
+ #define LCD_PINS_RS PB8
+ #define LCD_PINS_ENABLE PD2
+ #define LCD_PINS_D4 PB12
+ #define LCD_PINS_D5 PB13
+ #define LCD_PINS_D6 PB14
+ #define LCD_PINS_D7 PB15
+ #if DISABLED(NEWPANEL)
+ #define BEEPER_PIN 33
+ // Buttons are attached to a shift register
+ // Not wired yet
+ //#define SHIFT_CLK 38
+ //#define SHIFT_LD 42
+ //#define SHIFT_OUT 40
+ //#define SHIFT_EN 17
+ #endif
+ #endif
+
+ #if ENABLED(NEWPANEL)
+
+ #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
+
+ #define BEEPER_PIN 37
+
+ #define BTN_EN1 31
+ #define BTN_EN2 33
+ #define BTN_ENC 35
+
+ #define SD_DETECT_PIN 49
+ #define KILL_PIN 41
+
+ #if ENABLED(BQ_LCD_SMART_CONTROLLER)
+ #define LCD_BACKLIGHT_PIN 39
+ #endif
+
+ #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
+
+ #define BTN_EN1 64
+ #define BTN_EN2 59
+ #define BTN_ENC 63
+ #define SD_DETECT_PIN 42
+
+ #elif ENABLED(LCD_I2C_PANELOLU2)
+
+ #define BTN_EN1 47
+ #define BTN_EN2 43
+ #define BTN_ENC 32
+ #define LCD_SDSS 53
+ #define SD_DETECT_PIN -1
+ #define KILL_PIN 41
+
+ #elif ENABLED(LCD_I2C_VIKI)
+
+ #define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42.
+ #define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13.
+
+ #define BTN_ENC -1
+ #define LCD_SDSS 53
+ #define SD_DETECT_PIN 49
+
+ #elif ENABLED(VIKI2) || ENABLED(miniVIKI)
+
+ #define BEEPER_PIN 33
+
+ // Pins for DOGM SPI LCD Support
+ #define DOGLCD_A0 44
+ #define DOGLCD_CS 45
+ #define LCD_SCREEN_ROT_180
+
+ #define BTN_EN1 22
+ #define BTN_EN2 7
+ #define BTN_ENC 39
+
+ #define SDSS 53
+ #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board
+
+ #define KILL_PIN 31
+
+ #define STAT_LED_RED_PIN 32
+ #define STAT_LED_BLUE_PIN 35
+
+ #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
+ #define BTN_EN1 35
+ #define BTN_EN2 37
+ #define BTN_ENC 31
+ #define SD_DETECT_PIN 49
+ #define LCD_SDSS 53
+ #define KILL_PIN 41
+ #define BEEPER_PIN 23
+ #define DOGLCD_CS 29
+ #define DOGLCD_A0 27
+ #define LCD_BACKLIGHT_PIN 33
+ #elif ENABLED(MINIPANEL)
+ #define BEEPER_PIN 42
+ // Pins for DOGM SPI LCD Support
+ #define DOGLCD_A0 44
+ #define DOGLCD_CS 66
+ #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65
+ #define SDSS 53
+
+ #define KILL_PIN 64
+ // GLCD features
+ //#define LCD_CONTRAST 190
+ // Uncomment screen orientation
+ //#define LCD_SCREEN_ROT_90
+ //#define LCD_SCREEN_ROT_180
+ //#define LCD_SCREEN_ROT_270
+ // The encoder and click button
+ #define BTN_EN1 40
+ #define BTN_EN2 63
+ #define BTN_ENC 59
+ // not connected to a pin
+ #define SD_DETECT_PIN 49
+
+ #else
+
+ // Beeper on AUX-4
+ #define BEEPER_PIN 33
+
+ // buttons are directly attached using AUX-2
+ #if ENABLED(REPRAPWORLD_KEYPAD)
+ #define BTN_EN1 64
+ #define BTN_EN2 59
+ #define BTN_ENC 63
+ #define SHIFT_OUT 40
+ #define SHIFT_CLK 44
+ #define SHIFT_LD 42
+ #elif ENABLED(PANEL_ONE)
+ #define BTN_EN1 59 // AUX2 PIN 3
+ #define BTN_EN2 63 // AUX2 PIN 4
+ #define BTN_ENC 49 // AUX3 PIN 7
+ #else
+ #define BTN_EN1 37
+ #define BTN_EN2 35
+ #define BTN_ENC 31
+ #endif
+
+ #if ENABLED(G3D_PANEL)
+ #define SD_DETECT_PIN 49
+ #define KILL_PIN 41
+ #else
+ //#define SD_DETECT_PIN -1 // Ramps doesn't use this
+ #endif
+
+ #endif
+ #endif // NEWPANEL
+
+#endif // ULTRA_LCD
+
+#define U_MIN_PIN -1
+#define V_MIN_PIN -1
+#define W_MIN_PIN -1
+