Clean up, move unused to the bottom, add headings
This commit is contained in:
Scott Lahteine
parent
0c06e97e98
commit
e970461adb
@ -73,79 +73,81 @@
|
|||||||
|
|
||||||
// Serial Console Messages (do not translate those!)
|
// Serial Console Messages (do not translate those!)
|
||||||
|
|
||||||
#define MSG_Enqueing "enqueing \""
|
#define MSG_Enqueing "enqueing \""
|
||||||
#define MSG_POWERUP "PowerUp"
|
#define MSG_POWERUP "PowerUp"
|
||||||
#define MSG_EXTERNAL_RESET " External Reset"
|
#define MSG_EXTERNAL_RESET " External Reset"
|
||||||
#define MSG_BROWNOUT_RESET " Brown out Reset"
|
#define MSG_BROWNOUT_RESET " Brown out Reset"
|
||||||
#define MSG_WATCHDOG_RESET " Watchdog Reset"
|
#define MSG_WATCHDOG_RESET " Watchdog Reset"
|
||||||
#define MSG_SOFTWARE_RESET " Software Reset"
|
#define MSG_SOFTWARE_RESET " Software Reset"
|
||||||
#define MSG_AUTHOR " | Author: "
|
#define MSG_AUTHOR " | Author: "
|
||||||
#define MSG_CONFIGURATION_VER " Last Updated: "
|
#define MSG_CONFIGURATION_VER " Last Updated: "
|
||||||
#define MSG_FREE_MEMORY " Free Memory: "
|
#define MSG_FREE_MEMORY " Free Memory: "
|
||||||
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
||||||
#define MSG_OK "ok"
|
#define MSG_OK "ok"
|
||||||
#define MSG_FILE_SAVED "Done saving file."
|
#define MSG_FILE_SAVED "Done saving file."
|
||||||
#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: "
|
#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: "
|
||||||
#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
|
#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
|
||||||
#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
|
#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
|
||||||
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line: "
|
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line: "
|
||||||
#define MSG_FILE_PRINTED "Done printing file"
|
#define MSG_FILE_PRINTED "Done printing file"
|
||||||
#define MSG_BEGIN_FILE_LIST "Begin file list"
|
#define MSG_BEGIN_FILE_LIST "Begin file list"
|
||||||
#define MSG_END_FILE_LIST "End file list"
|
#define MSG_END_FILE_LIST "End file list"
|
||||||
#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
|
#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
|
||||||
#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
|
#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
|
||||||
#define MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder "
|
#define MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder "
|
||||||
#define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
|
#define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
|
||||||
#define MSG_M221_INVALID_EXTRUDER "M221 Invalid extruder "
|
#define MSG_M221_INVALID_EXTRUDER "M221 Invalid extruder "
|
||||||
#define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
|
#define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
|
||||||
#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
|
#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
|
||||||
#define MSG_HEATING "Heating..."
|
#define MSG_HEATING "Heating..."
|
||||||
#define MSG_HEATING_COMPLETE "Heating done."
|
#define MSG_HEATING_COMPLETE "Heating done."
|
||||||
#define MSG_BED_HEATING "Bed Heating."
|
#define MSG_BED_HEATING "Bed Heating."
|
||||||
#define MSG_BED_DONE "Bed done."
|
#define MSG_BED_DONE "Bed done."
|
||||||
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
|
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
|
||||||
#define MSG_COUNT_X " Count X: "
|
#define MSG_COUNT_X " Count X: "
|
||||||
#define MSG_ERR_KILLED "Printer halted. kill() called!"
|
#define MSG_ERR_KILLED "Printer halted. kill() called!"
|
||||||
#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
|
#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
|
||||||
#define MSG_RESEND "Resend: "
|
#define MSG_RESEND "Resend: "
|
||||||
#define MSG_UNKNOWN_COMMAND "Unknown command: \""
|
#define MSG_UNKNOWN_COMMAND "Unknown command: \""
|
||||||
#define MSG_ACTIVE_EXTRUDER "Active Extruder: "
|
#define MSG_ACTIVE_EXTRUDER "Active Extruder: "
|
||||||
#define MSG_INVALID_EXTRUDER "Invalid extruder"
|
#define MSG_INVALID_EXTRUDER "Invalid extruder"
|
||||||
#define MSG_X_MIN "x_min: "
|
#define MSG_X_MIN "x_min: "
|
||||||
#define MSG_X_MAX "x_max: "
|
#define MSG_X_MAX "x_max: "
|
||||||
#define MSG_Y_MIN "y_min: "
|
#define MSG_Y_MIN "y_min: "
|
||||||
#define MSG_Y_MAX "y_max: "
|
#define MSG_Y_MAX "y_max: "
|
||||||
#define MSG_Z_MIN "z_min: "
|
#define MSG_Z_MIN "z_min: "
|
||||||
#define MSG_Z_MAX "z_max: "
|
#define MSG_Z_MAX "z_max: "
|
||||||
#define MSG_M119_REPORT "Reporting endstop status"
|
#define MSG_M119_REPORT "Reporting endstop status"
|
||||||
#define MSG_ENDSTOP_HIT "TRIGGERED"
|
#define MSG_ENDSTOP_HIT "TRIGGERED"
|
||||||
#define MSG_ENDSTOP_OPEN "open"
|
#define MSG_ENDSTOP_OPEN "open"
|
||||||
#define MSG_HOTEND_OFFSET "Hotend offsets:"
|
#define MSG_HOTEND_OFFSET "Hotend offsets:"
|
||||||
|
|
||||||
#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
|
#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
|
||||||
#define MSG_SD_INIT_FAIL "SD init fail"
|
#define MSG_SD_INIT_FAIL "SD init fail"
|
||||||
#define MSG_SD_VOL_INIT_FAIL "volume.init failed"
|
#define MSG_SD_VOL_INIT_FAIL "volume.init failed"
|
||||||
#define MSG_SD_OPENROOT_FAIL "openRoot failed"
|
#define MSG_SD_OPENROOT_FAIL "openRoot failed"
|
||||||
#define MSG_SD_CARD_OK "SD card ok"
|
#define MSG_SD_CARD_OK "SD card ok"
|
||||||
#define MSG_SD_WORKDIR_FAIL "workDir open failed"
|
#define MSG_SD_WORKDIR_FAIL "workDir open failed"
|
||||||
#define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
|
#define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
|
||||||
#define MSG_SD_FILE_OPENED "File opened: "
|
#define MSG_SD_FILE_OPENED "File opened: "
|
||||||
#define MSG_SD_SIZE " Size: "
|
#define MSG_SD_SIZE " Size: "
|
||||||
#define MSG_SD_FILE_SELECTED "File selected"
|
#define MSG_SD_FILE_SELECTED "File selected"
|
||||||
#define MSG_SD_WRITE_TO_FILE "Writing to file: "
|
#define MSG_SD_WRITE_TO_FILE "Writing to file: "
|
||||||
#define MSG_SD_PRINTING_BYTE "SD printing byte "
|
#define MSG_SD_PRINTING_BYTE "SD printing byte "
|
||||||
#define MSG_SD_NOT_PRINTING "Not SD printing"
|
#define MSG_SD_NOT_PRINTING "Not SD printing"
|
||||||
#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
|
#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
|
||||||
#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
|
#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
|
||||||
|
|
||||||
#define MSG_STEPPER_TOO_HIGH "Steprate too high: "
|
#define MSG_STEPPER_TOO_HIGH "Steprate too high: "
|
||||||
#define MSG_ENDSTOPS_HIT "endstops hit: "
|
#define MSG_ENDSTOPS_HIT "endstops hit: "
|
||||||
#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
|
#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
|
||||||
#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
|
#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
|
||||||
#define MSG_BABYSTEPPING_X "Babystepping X"
|
#define MSG_BABYSTEPPING_X "Babystepping X"
|
||||||
#define MSG_BABYSTEPPING_Y "Babystepping Y"
|
#define MSG_BABYSTEPPING_Y "Babystepping Y"
|
||||||
#define MSG_BABYSTEPPING_Z "Babystepping Z"
|
#define MSG_BABYSTEPPING_Z "Babystepping Z"
|
||||||
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
|
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
|
||||||
|
|
||||||
|
// LCD Menu Messages
|
||||||
|
|
||||||
#if LANGUAGE_CHOICE == en // English
|
#if LANGUAGE_CHOICE == en // English
|
||||||
#include "language_en.h"
|
#include "language_en.h"
|
||||||
@ -175,4 +177,4 @@
|
|||||||
#include "language_eu.h"
|
#include "language_eu.h"
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#endif // ifndef LANGUAGE_H
|
#endif //__LANGUAGE_H
|
||||||
|
|||||||
@ -1,9 +1,13 @@
|
|||||||
|
/**
|
||||||
|
* Aragonese
|
||||||
|
*
|
||||||
|
* LCD Menu Messages
|
||||||
|
* Please note these are limited to 17 characters!
|
||||||
|
*
|
||||||
|
*/
|
||||||
#ifndef LANGUAGE_AN_H
|
#ifndef LANGUAGE_AN_H
|
||||||
#define LANGUAGE_AN_H
|
#define LANGUAGE_AN_H
|
||||||
|
|
||||||
// LCD Menu Messages
|
|
||||||
// Please note these are limited to 17 characters!
|
|
||||||
|
|
||||||
#define WELCOME_MSG MACHINE_NAME " parada."
|
#define WELCOME_MSG MACHINE_NAME " parada."
|
||||||
#define MSG_SD_INSERTED "Tarcheta colocada"
|
#define MSG_SD_INSERTED "Tarcheta colocada"
|
||||||
#define MSG_SD_REMOVED "Tarcheta retirada"
|
#define MSG_SD_REMOVED "Tarcheta retirada"
|
||||||
@ -80,7 +84,6 @@
|
|||||||
#define MSG_YSTEPS "Y trangos/mm"
|
#define MSG_YSTEPS "Y trangos/mm"
|
||||||
#define MSG_ZSTEPS "Z trangos/mm"
|
#define MSG_ZSTEPS "Z trangos/mm"
|
||||||
#define MSG_ESTEPS "E trangos/mm"
|
#define MSG_ESTEPS "E trangos/mm"
|
||||||
#define MSG_RECTRACT "Retraer"
|
|
||||||
#define MSG_TEMPERATURE "Temperatura"
|
#define MSG_TEMPERATURE "Temperatura"
|
||||||
#define MSG_MOTION "Movimiento"
|
#define MSG_MOTION "Movimiento"
|
||||||
#define MSG_CONTRAST "Contrast"
|
#define MSG_CONTRAST "Contrast"
|
||||||
@ -122,14 +125,15 @@
|
|||||||
#define MSG_BABYSTEP_Z "Babystep Z"
|
#define MSG_BABYSTEP_Z "Babystep Z"
|
||||||
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
||||||
|
|
||||||
|
#define MSG_RECTRACT "Retraer"
|
||||||
#define MSG_RECTRACT_WIDE "Retraer"
|
#define MSG_RECTRACT_WIDE "Retraer"
|
||||||
#define MSG_TEMPERATURE_WIDE "Temperatura"
|
#define MSG_TEMPERATURE_WIDE "Temperatura"
|
||||||
#define MSG_TEMPERATURE_RTN "Temperatura"
|
#define MSG_TEMPERATURE_RTN "Temperatura"
|
||||||
#define MSG_MAIN_WIDE "Menu Prencipal"
|
#define MSG_MAIN_WIDE "Menu Prencipal"
|
||||||
#define MSG_MOTION_WIDE "Movimiento"
|
#define MSG_MOTION_WIDE "Movimiento"
|
||||||
#define MSG_PREPARE_ALT "Preparar"
|
#define MSG_PREPARE_ALT "Preparar"
|
||||||
#define MSG_CONTROL_ARROW "Control"
|
#define MSG_CONTROL_ARROW "Control \x7E"
|
||||||
#define MSG_RETRACT_ARROW "Retraer"
|
#define MSG_RETRACT_ARROW "Retraer \x7E"
|
||||||
#define MSG_STEPPER_RELEASED "Desacoplada."
|
#define MSG_STEPPER_RELEASED "Desacoplada."
|
||||||
|
|
||||||
#endif // LANGUAGE_AN_H
|
#endif // LANGUAGE_AN_H
|
||||||
|
|||||||
@ -1,9 +1,13 @@
|
|||||||
|
/**
|
||||||
|
* Catalan
|
||||||
|
*
|
||||||
|
* LCD Menu Messages
|
||||||
|
* Please note these are limited to 17 characters!
|
||||||
|
*
|
||||||
|
*/
|
||||||
#ifndef LANGUAGE_CA_H
|
#ifndef LANGUAGE_CA_H
|
||||||
#define LANGUAGE_CA_H
|
#define LANGUAGE_CA_H
|
||||||
|
|
||||||
// LCD Menu Messages
|
|
||||||
// Please note these are limited to 17 characters!
|
|
||||||
|
|
||||||
#define WELCOME_MSG MACHINE_NAME " preparada."
|
#define WELCOME_MSG MACHINE_NAME " preparada."
|
||||||
#define MSG_SD_INSERTED "SD detectada."
|
#define MSG_SD_INSERTED "SD detectada."
|
||||||
#define MSG_SD_REMOVED "SD expulsada."
|
#define MSG_SD_REMOVED "SD expulsada."
|
||||||
@ -80,7 +84,6 @@
|
|||||||
#define MSG_YSTEPS "Ypassos/mm"
|
#define MSG_YSTEPS "Ypassos/mm"
|
||||||
#define MSG_ZSTEPS "Zpassos/mm"
|
#define MSG_ZSTEPS "Zpassos/mm"
|
||||||
#define MSG_ESTEPS "Epassos/mm"
|
#define MSG_ESTEPS "Epassos/mm"
|
||||||
#define MSG_RECTRACT "Retreure"
|
|
||||||
#define MSG_TEMPERATURE "Temperatura"
|
#define MSG_TEMPERATURE "Temperatura"
|
||||||
#define MSG_MOTION "Moviment"
|
#define MSG_MOTION "Moviment"
|
||||||
#define MSG_CONTRAST "Contrast de LCD"
|
#define MSG_CONTRAST "Contrast de LCD"
|
||||||
@ -122,4 +125,6 @@
|
|||||||
#define MSG_BABYSTEP_Z "Babystep Z"
|
#define MSG_BABYSTEP_Z "Babystep Z"
|
||||||
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
||||||
|
|
||||||
|
#define MSG_RECTRACT "Retreure"
|
||||||
|
|
||||||
#endif // LANGUAGE_CA_H
|
#endif // LANGUAGE_CA_H
|
||||||
|
|||||||
@ -1,9 +1,13 @@
|
|||||||
|
/**
|
||||||
|
* German
|
||||||
|
*
|
||||||
|
* LCD Menu Messages
|
||||||
|
* Please note these are limited to 17 characters!
|
||||||
|
*
|
||||||
|
*/
|
||||||
#ifndef LANGUAGE_DE_H
|
#ifndef LANGUAGE_DE_H
|
||||||
#define LANGUAGE_DE_H
|
#define LANGUAGE_DE_H
|
||||||
|
|
||||||
// LCD Menu Messages
|
|
||||||
// Please note these are limited to 17 characters!
|
|
||||||
|
|
||||||
#define WELCOME_MSG MACHINE_NAME " Bereit."
|
#define WELCOME_MSG MACHINE_NAME " Bereit."
|
||||||
#define MSG_SD_INSERTED "SDKarte erkannt"
|
#define MSG_SD_INSERTED "SDKarte erkannt"
|
||||||
#define MSG_SD_REMOVED "SDKarte entfernt"
|
#define MSG_SD_REMOVED "SDKarte entfernt"
|
||||||
@ -80,8 +84,6 @@
|
|||||||
#define MSG_YSTEPS "Ysteps/mm"
|
#define MSG_YSTEPS "Ysteps/mm"
|
||||||
#define MSG_ZSTEPS "Zsteps/mm"
|
#define MSG_ZSTEPS "Zsteps/mm"
|
||||||
#define MSG_ESTEPS "Esteps/mm"
|
#define MSG_ESTEPS "Esteps/mm"
|
||||||
#define MSG_RECTRACT_WIDE "Rectract"
|
|
||||||
#define MSG_WATCH "Beobachten"
|
|
||||||
#define MSG_TEMPERATURE "Temperatur"
|
#define MSG_TEMPERATURE "Temperatur"
|
||||||
#define MSG_MOTION "Bewegung"
|
#define MSG_MOTION "Bewegung"
|
||||||
#define MSG_CONTRAST "LCD contrast"
|
#define MSG_CONTRAST "LCD contrast"
|
||||||
@ -89,8 +91,8 @@
|
|||||||
#define MSG_LOAD_EPROM "EPROM laden"
|
#define MSG_LOAD_EPROM "EPROM laden"
|
||||||
#define MSG_RESTORE_FAILSAFE "Standardkonfig."
|
#define MSG_RESTORE_FAILSAFE "Standardkonfig."
|
||||||
#define MSG_REFRESH "Aktualisieren"
|
#define MSG_REFRESH "Aktualisieren"
|
||||||
|
#define MSG_WATCH "Beobachten"
|
||||||
#define MSG_PREPARE "Vorbereitung"
|
#define MSG_PREPARE "Vorbereitung"
|
||||||
#define MSG_CONTROL "Einstellungen"
|
|
||||||
#define MSG_TUNE "Justierung"
|
#define MSG_TUNE "Justierung"
|
||||||
#define MSG_PAUSE_PRINT "Druck anhalten"
|
#define MSG_PAUSE_PRINT "Druck anhalten"
|
||||||
#define MSG_RESUME_PRINT "Druck fortsetz"
|
#define MSG_RESUME_PRINT "Druck fortsetz"
|
||||||
@ -104,7 +106,6 @@
|
|||||||
#define MSG_NO_MOVE "Kein Zug."
|
#define MSG_NO_MOVE "Kein Zug."
|
||||||
#define MSG_KILLED "KILLED"
|
#define MSG_KILLED "KILLED"
|
||||||
#define MSG_STOPPED "GESTOPPT"
|
#define MSG_STOPPED "GESTOPPT"
|
||||||
#define MSG_STEPPER_RELEASED "Stepper frei"
|
|
||||||
#define MSG_CONTROL_RETRACT "Retract mm"
|
#define MSG_CONTROL_RETRACT "Retract mm"
|
||||||
#define MSG_CONTROL_RETRACT_SWAP "Wechs. Retract mm"
|
#define MSG_CONTROL_RETRACT_SWAP "Wechs. Retract mm"
|
||||||
#define MSG_CONTROL_RETRACTF "Retract V"
|
#define MSG_CONTROL_RETRACTF "Retract V"
|
||||||
@ -123,6 +124,8 @@
|
|||||||
#define MSG_BABYSTEP_Y "Babystep Y"
|
#define MSG_BABYSTEP_Y "Babystep Y"
|
||||||
#define MSG_BABYSTEP_Z "Babystep Z"
|
#define MSG_BABYSTEP_Z "Babystep Z"
|
||||||
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
||||||
#define MSG_CONTRAST "Contrast"
|
|
||||||
|
#define MSG_STEPPER_RELEASED "Stepper frei"
|
||||||
|
#define MSG_RECTRACT_WIDE "Rectract"
|
||||||
|
|
||||||
#endif // LANGUAGE_DE_H
|
#endif // LANGUAGE_DE_H
|
||||||
|
|||||||
@ -1,8 +1,12 @@
|
|||||||
#ifndef LANGUAGE_CA_H
|
/**
|
||||||
#define LANGUAGE_CA_H
|
* English
|
||||||
|
*
|
||||||
// LCD Menu Messages
|
* LCD Menu Messages
|
||||||
// Please note these are limited to 17 characters!
|
* Please note these are limited to 17 characters!
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
#ifndef LANGUAGE_EN_H
|
||||||
|
#define LANGUAGE_EN_H
|
||||||
|
|
||||||
#define WELCOME_MSG MACHINE_NAME " ready."
|
#define WELCOME_MSG MACHINE_NAME " ready."
|
||||||
#define MSG_SD_INSERTED "Card inserted"
|
#define MSG_SD_INSERTED "Card inserted"
|
||||||
@ -80,7 +84,6 @@
|
|||||||
#define MSG_YSTEPS "Ysteps/mm"
|
#define MSG_YSTEPS "Ysteps/mm"
|
||||||
#define MSG_ZSTEPS "Zsteps/mm"
|
#define MSG_ZSTEPS "Zsteps/mm"
|
||||||
#define MSG_ESTEPS "Esteps/mm"
|
#define MSG_ESTEPS "Esteps/mm"
|
||||||
#define MSG_RECTRACT "Rectract"
|
|
||||||
#define MSG_TEMPERATURE "Temperature"
|
#define MSG_TEMPERATURE "Temperature"
|
||||||
#define MSG_MOTION "Motion"
|
#define MSG_MOTION "Motion"
|
||||||
#define MSG_CONTRAST "LCD contrast"
|
#define MSG_CONTRAST "LCD contrast"
|
||||||
@ -122,4 +125,6 @@
|
|||||||
#define MSG_BABYSTEP_Z "Babystep Z"
|
#define MSG_BABYSTEP_Z "Babystep Z"
|
||||||
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
||||||
|
|
||||||
#endif // LANGUAGE_CA_H
|
#define MSG_RECTRACT "Rectract"
|
||||||
|
|
||||||
|
#endif // LANGUAGE_EN_H
|
||||||
|
|||||||
@ -1,9 +1,13 @@
|
|||||||
|
/**
|
||||||
|
* Spanish
|
||||||
|
*
|
||||||
|
* LCD Menu Messages
|
||||||
|
* Please note these are limited to 17 characters!
|
||||||
|
*
|
||||||
|
*/
|
||||||
#ifndef LANGUAGE_ES_H
|
#ifndef LANGUAGE_ES_H
|
||||||
#define LANGUAGE_ES_H
|
#define LANGUAGE_ES_H
|
||||||
|
|
||||||
// LCD Menu Messages
|
|
||||||
// Please note these are limited to 17 characters!
|
|
||||||
|
|
||||||
#define WELCOME_MSG MACHINE_NAME " lista."
|
#define WELCOME_MSG MACHINE_NAME " lista."
|
||||||
#define MSG_SD_INSERTED "Tarjeta colocada"
|
#define MSG_SD_INSERTED "Tarjeta colocada"
|
||||||
#define MSG_SD_REMOVED "Tarjeta retirada"
|
#define MSG_SD_REMOVED "Tarjeta retirada"
|
||||||
@ -80,9 +84,9 @@
|
|||||||
#define MSG_YSTEPS "Y pasos/mm"
|
#define MSG_YSTEPS "Y pasos/mm"
|
||||||
#define MSG_ZSTEPS "Z pasos/mm"
|
#define MSG_ZSTEPS "Z pasos/mm"
|
||||||
#define MSG_ESTEPS "E pasos/mm"
|
#define MSG_ESTEPS "E pasos/mm"
|
||||||
#define MSG_RECTRACT "Retraer"
|
|
||||||
#define MSG_TEMPERATURE "Temperatura"
|
#define MSG_TEMPERATURE "Temperatura"
|
||||||
#define MSG_MOTION "Movimiento"
|
#define MSG_MOTION "Movimiento"
|
||||||
|
#define MSG_CONTRAST "Contraste"
|
||||||
#define MSG_STORE_EPROM "Guardar memoria"
|
#define MSG_STORE_EPROM "Guardar memoria"
|
||||||
#define MSG_LOAD_EPROM "Cargar memoria"
|
#define MSG_LOAD_EPROM "Cargar memoria"
|
||||||
#define MSG_RESTORE_FAILSAFE "Rest. de emergen."
|
#define MSG_RESTORE_FAILSAFE "Rest. de emergen."
|
||||||
@ -113,15 +117,6 @@
|
|||||||
#define MSG_FILAMENTCHANGE "Cambiar filamento"
|
#define MSG_FILAMENTCHANGE "Cambiar filamento"
|
||||||
#define MSG_INIT_SDCARD "Iniciando tarjeta"
|
#define MSG_INIT_SDCARD "Iniciando tarjeta"
|
||||||
#define MSG_CNG_SDCARD "Cambiar tarjeta"
|
#define MSG_CNG_SDCARD "Cambiar tarjeta"
|
||||||
#define MSG_RECTRACT_WIDE "Retraer"
|
|
||||||
#define MSG_TEMPERATURE_WIDE "Temperatura"
|
|
||||||
#define MSG_TEMPERATURE_RTN "Temperatura"
|
|
||||||
#define MSG_MAIN_WIDE "Menu principal"
|
|
||||||
#define MSG_MOTION_WIDE "Movimiento"
|
|
||||||
#define MSG_PREPARE_ALT "Preparar"
|
|
||||||
#define MSG_CONTROL_ARROW "Control"
|
|
||||||
#define MSG_RETRACT_ARROW "Retraer"
|
|
||||||
#define MSG_STEPPER_RELEASED "Desacoplada."
|
|
||||||
#define MSG_ZPROBE_OUT "sonda Z fuera"
|
#define MSG_ZPROBE_OUT "sonda Z fuera"
|
||||||
#define MSG_POSITION_UNKNOWN "Reiniciar X/Y y Z"
|
#define MSG_POSITION_UNKNOWN "Reiniciar X/Y y Z"
|
||||||
#define MSG_ZPROBE_ZOFFSET "Offset Z"
|
#define MSG_ZPROBE_ZOFFSET "Offset Z"
|
||||||
@ -129,6 +124,16 @@
|
|||||||
#define MSG_BABYSTEP_Y "Babystep Y"
|
#define MSG_BABYSTEP_Y "Babystep Y"
|
||||||
#define MSG_BABYSTEP_Z "Babystep Z"
|
#define MSG_BABYSTEP_Z "Babystep Z"
|
||||||
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
||||||
#define MSG_CONTRAST "Contraste"
|
|
||||||
|
#define MSG_RECTRACT "Retraer"
|
||||||
|
#define MSG_RECTRACT_WIDE "Retraer"
|
||||||
|
#define MSG_TEMPERATURE_WIDE "Temperatura"
|
||||||
|
#define MSG_TEMPERATURE_RTN "Temperatura"
|
||||||
|
#define MSG_MAIN_WIDE "Menu principal"
|
||||||
|
#define MSG_MOTION_WIDE "Movimiento"
|
||||||
|
#define MSG_PREPARE_ALT "Preparar"
|
||||||
|
#define MSG_CONTROL_ARROW "Control \x7E"
|
||||||
|
#define MSG_RETRACT_ARROW "Retraer \x7E"
|
||||||
|
#define MSG_STEPPER_RELEASED "Desacoplada."
|
||||||
|
|
||||||
#endif // LANGUAGE_ES_H
|
#endif // LANGUAGE_ES_H
|
||||||
|
|||||||
@ -1,9 +1,13 @@
|
|||||||
|
/**
|
||||||
|
* Basque-Euskera
|
||||||
|
*
|
||||||
|
* LCD Menu Messages
|
||||||
|
* Please note these are limited to 17 characters!
|
||||||
|
*
|
||||||
|
*/
|
||||||
#ifndef LANGUAGE_EU_H
|
#ifndef LANGUAGE_EU_H
|
||||||
#define LANGUAGE_EU_H
|
#define LANGUAGE_EU_H
|
||||||
|
|
||||||
// LCD Menu Messages
|
|
||||||
// Please note these are limited to 17 characters!
|
|
||||||
|
|
||||||
#define WELCOME_MSG MACHINE_NAME " prest."
|
#define WELCOME_MSG MACHINE_NAME " prest."
|
||||||
#define MSG_SD_INSERTED "Txartela sartuta"
|
#define MSG_SD_INSERTED "Txartela sartuta"
|
||||||
#define MSG_SD_REMOVED "Txartela kenduta"
|
#define MSG_SD_REMOVED "Txartela kenduta"
|
||||||
@ -80,7 +84,6 @@
|
|||||||
#define MSG_YSTEPS "Y pausoak/mm"
|
#define MSG_YSTEPS "Y pausoak/mm"
|
||||||
#define MSG_ZSTEPS "Z pausoak/mm"
|
#define MSG_ZSTEPS "Z pausoak/mm"
|
||||||
#define MSG_ESTEPS "E pausoak/mm"
|
#define MSG_ESTEPS "E pausoak/mm"
|
||||||
#define MSG_RECTRACT "Atzera eragin"
|
|
||||||
#define MSG_TEMPERATURE "Tenperatura"
|
#define MSG_TEMPERATURE "Tenperatura"
|
||||||
#define MSG_MOTION "Mugimendua"
|
#define MSG_MOTION "Mugimendua"
|
||||||
#define MSG_CONTRAST "LCD kontrastea"
|
#define MSG_CONTRAST "LCD kontrastea"
|
||||||
@ -122,4 +125,6 @@
|
|||||||
#define MSG_BABYSTEP_Z "Babystep Z"
|
#define MSG_BABYSTEP_Z "Babystep Z"
|
||||||
#define MSG_ENDSTOP_ABORT "Endstop deuseztat"
|
#define MSG_ENDSTOP_ABORT "Endstop deuseztat"
|
||||||
|
|
||||||
|
#define MSG_RECTRACT "Atzera eragin"
|
||||||
|
|
||||||
#endif // LANGUAGE_EU_H
|
#endif // LANGUAGE_EU_H
|
||||||
|
|||||||
@ -1,9 +1,13 @@
|
|||||||
|
/**
|
||||||
|
* Finnish
|
||||||
|
*
|
||||||
|
* LCD Menu Messages
|
||||||
|
* Please note these are limited to 17 characters!
|
||||||
|
*
|
||||||
|
*/
|
||||||
#ifndef LANGUAGE_FI_H
|
#ifndef LANGUAGE_FI_H
|
||||||
#define LANGUAGE_FI_H
|
#define LANGUAGE_FI_H
|
||||||
|
|
||||||
// LCD Menu Messages
|
|
||||||
// Please note these are limited to 17 characters!
|
|
||||||
|
|
||||||
#define WELCOME_MSG MACHINE_NAME " valmis."
|
#define WELCOME_MSG MACHINE_NAME " valmis."
|
||||||
#define MSG_SD_INSERTED "Kortti asetettu"
|
#define MSG_SD_INSERTED "Kortti asetettu"
|
||||||
#define MSG_SD_REMOVED "Kortti poistettu"
|
#define MSG_SD_REMOVED "Kortti poistettu"
|
||||||
@ -80,7 +84,6 @@
|
|||||||
#define MSG_YSTEPS "Ysteps/mm"
|
#define MSG_YSTEPS "Ysteps/mm"
|
||||||
#define MSG_ZSTEPS "Zsteps/mm"
|
#define MSG_ZSTEPS "Zsteps/mm"
|
||||||
#define MSG_ESTEPS "Esteps/mm"
|
#define MSG_ESTEPS "Esteps/mm"
|
||||||
#define MSG_RECTRACT "Veda takaisin"
|
|
||||||
#define MSG_TEMPERATURE "Lampotila"
|
#define MSG_TEMPERATURE "Lampotila"
|
||||||
#define MSG_MOTION "Liike"
|
#define MSG_MOTION "Liike"
|
||||||
#define MSG_CONTRAST "LCD contrast"
|
#define MSG_CONTRAST "LCD contrast"
|
||||||
@ -122,4 +125,6 @@
|
|||||||
#define MSG_BABYSTEP_Z "Babystep Z"
|
#define MSG_BABYSTEP_Z "Babystep Z"
|
||||||
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
||||||
|
|
||||||
|
#define MSG_RECTRACT "Veda takaisin"
|
||||||
|
|
||||||
#endif // LANGUAGE_FI_H
|
#endif // LANGUAGE_FI_H
|
||||||
|
|||||||
@ -1,128 +1,131 @@
|
|||||||
|
/**
|
||||||
|
* French
|
||||||
|
*
|
||||||
|
* LCD Menu Messages
|
||||||
|
* Please note these are limited to 17 characters!
|
||||||
|
*
|
||||||
|
*/
|
||||||
#ifndef LANGUAGE_FR_H
|
#ifndef LANGUAGE_FR_H
|
||||||
#define LANGUAGE_FR_H
|
#define LANGUAGE_FR_H
|
||||||
|
|
||||||
// LCD Menu Messages
|
#define WELCOME_MSG MACHINE_NAME " prete."
|
||||||
// Please note these are limited to 17 characters!
|
#define MSG_SD_INSERTED "Carte inseree"
|
||||||
|
#define MSG_SD_REMOVED "Carte retiree"
|
||||||
|
#define MSG_MAIN "Menu principal"
|
||||||
|
#define MSG_AUTOSTART "Demarrage auto"
|
||||||
|
#define MSG_DISABLE_STEPPERS "Arreter moteurs"
|
||||||
|
#define MSG_AUTO_HOME "Home auto."
|
||||||
|
#define MSG_SET_HOME_OFFSETS "Set home offsets"
|
||||||
|
#define MSG_SET_ORIGIN "Regler origine"
|
||||||
|
#define MSG_PREHEAT_PLA "Prechauffage PLA"
|
||||||
|
#define MSG_PREHEAT_PLA0 "Prechauff. PLA 1"
|
||||||
|
#define MSG_PREHEAT_PLA1 "Prechauff. PLA 2"
|
||||||
|
#define MSG_PREHEAT_PLA2 "Prechauff. PLA 3"
|
||||||
|
#define MSG_PREHEAT_PLA012 "Prech. PLA Tout"
|
||||||
|
#define MSG_PREHEAT_PLA_BEDONLY "Prech. PLA Plateau"
|
||||||
|
#define MSG_PREHEAT_PLA_SETTINGS "Regl. prech. PLA"
|
||||||
|
#define MSG_PREHEAT_ABS "Prechauffage ABS"
|
||||||
|
#define MSG_PREHEAT_ABS0 "Prechauff. ABS 1"
|
||||||
|
#define MSG_PREHEAT_ABS1 "Prechauff. ABS 2"
|
||||||
|
#define MSG_PREHEAT_ABS2 "Prechauff. ABS 3"
|
||||||
|
#define MSG_PREHEAT_ABS012 "Prech. ABS Tout"
|
||||||
|
#define MSG_PREHEAT_ABS_BEDONLY "Prech. ABS Plateau"
|
||||||
|
#define MSG_PREHEAT_ABS_SETTINGS "Regl. prech. ABS"
|
||||||
|
#define MSG_COOLDOWN "Refroidir"
|
||||||
|
#define MSG_SWITCH_PS_ON "Allumer alim."
|
||||||
|
#define MSG_SWITCH_PS_OFF "Eteindre alim."
|
||||||
|
#define MSG_EXTRUDE "Extrusion"
|
||||||
|
#define MSG_RETRACT "Retraction"
|
||||||
|
#define MSG_MOVE_AXIS "Deplacer un axe"
|
||||||
|
#define MSG_MOVE_X "Move X"
|
||||||
|
#define MSG_MOVE_Y "Move Y"
|
||||||
|
#define MSG_MOVE_Z "Move Z"
|
||||||
|
#define MSG_MOVE_E "Extruder"
|
||||||
|
#define MSG_MOVE_E1 "Extruder2"
|
||||||
|
#define MSG_MOVE_E2 "Extruder3"
|
||||||
|
#define MSG_MOVE_01MM "Move 0.1mm"
|
||||||
|
#define MSG_MOVE_1MM "Move 1mm"
|
||||||
|
#define MSG_MOVE_10MM "Move 10mm"
|
||||||
|
#define MSG_SPEED " Vitesse"
|
||||||
|
#define MSG_NOZZLE "Buse"
|
||||||
|
#define MSG_NOZZLE1 "Buse2"
|
||||||
|
#define MSG_NOZZLE2 "Buse3"
|
||||||
|
#define MSG_BED "Plateau"
|
||||||
|
#define MSG_FAN_SPEED "Vite. ventilateur"
|
||||||
|
#define MSG_FLOW "Flux"
|
||||||
|
#define MSG_FLOW0 "Flux 0"
|
||||||
|
#define MSG_FLOW1 "Flux 1"
|
||||||
|
#define MSG_FLOW2 "Flux 2"
|
||||||
|
#define MSG_CONTROL "Controler"
|
||||||
|
#define MSG_MIN " \002 Min"
|
||||||
|
#define MSG_MAX " \002 Max"
|
||||||
|
#define MSG_FACTOR " \002 Facteur"
|
||||||
|
#define MSG_AUTOTEMP "Temp. Auto."
|
||||||
|
#define MSG_ON "Marche "
|
||||||
|
#define MSG_OFF "Arret"
|
||||||
|
#define MSG_PID_P "PID-P"
|
||||||
|
#define MSG_PID_I "PID-I"
|
||||||
|
#define MSG_PID_D "PID-D"
|
||||||
|
#define MSG_PID_C "PID-C"
|
||||||
|
#define MSG_ACC "Accel"
|
||||||
|
#define MSG_VXY_JERK "Vxy-jerk"
|
||||||
|
#define MSG_VZ_JERK "Vz-jerk"
|
||||||
|
#define MSG_VE_JERK "Ve-jerk"
|
||||||
|
#define MSG_VMAX "Vmax"
|
||||||
|
#define MSG_X "x"
|
||||||
|
#define MSG_Y "y"
|
||||||
|
#define MSG_Z "z"
|
||||||
|
#define MSG_E "e"
|
||||||
|
#define MSG_VMIN "Vmin"
|
||||||
|
#define MSG_VTRAV_MIN "Vdepl min"
|
||||||
|
#define MSG_AMAX "Amax "
|
||||||
|
#define MSG_A_RETRACT "A-retract"
|
||||||
|
#define MSG_XSTEPS "Xpas/mm"
|
||||||
|
#define MSG_YSTEPS "Ypas/mm"
|
||||||
|
#define MSG_ZSTEPS "Zpas/mm"
|
||||||
|
#define MSG_ESTEPS "Epas/mm"
|
||||||
|
#define MSG_TEMPERATURE "Temperature"
|
||||||
|
#define MSG_MOTION "Mouvement"
|
||||||
|
#define MSG_CONTRAST "Contraste LCD"
|
||||||
|
#define MSG_STORE_EPROM "Sauver config"
|
||||||
|
#define MSG_LOAD_EPROM "Lire config"
|
||||||
|
#define MSG_RESTORE_FAILSAFE "Restaurer defauts"
|
||||||
|
#define MSG_REFRESH "Actualiser"
|
||||||
|
#define MSG_WATCH "Surveiller"
|
||||||
|
#define MSG_PREPARE "Preparer"
|
||||||
|
#define MSG_TUNE "Regler"
|
||||||
|
#define MSG_PAUSE_PRINT "Interrompre impr."
|
||||||
|
#define MSG_RESUME_PRINT "Reprendre impr."
|
||||||
|
#define MSG_STOP_PRINT "Arreter impr."
|
||||||
|
#define MSG_CARD_MENU "Impr. depuis SD"
|
||||||
|
#define MSG_NO_CARD "Pas de carte"
|
||||||
|
#define MSG_DWELL "Repos..."
|
||||||
|
#define MSG_USERWAIT "Atten. de l'util."
|
||||||
|
#define MSG_RESUMING "Repri. de l'impr."
|
||||||
|
#define MSG_PRINT_ABORTED "Print aborted"
|
||||||
|
#define MSG_NO_MOVE "Aucun mouvement."
|
||||||
|
#define MSG_KILLED "MORT."
|
||||||
|
#define MSG_STOPPED "STOPPE."
|
||||||
|
#define MSG_CONTROL_RETRACT "Retraction mm"
|
||||||
|
#define MSG_CONTROL_RETRACT_SWAP "Ech. Retr. mm"
|
||||||
|
#define MSG_CONTROL_RETRACTF "Retraction V"
|
||||||
|
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
|
||||||
|
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
|
||||||
|
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Ech. UnRet +mm"
|
||||||
|
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
|
||||||
|
#define MSG_AUTORETRACT "Retract. Auto."
|
||||||
|
#define MSG_FILAMENTCHANGE "Changer filament"
|
||||||
|
#define MSG_INIT_SDCARD "Init. la carte SD"
|
||||||
|
#define MSG_CNG_SDCARD "Changer de carte"
|
||||||
|
#define MSG_ZPROBE_OUT "Z sonde exte. lit"
|
||||||
|
#define MSG_POSITION_UNKNOWN "Rev. dans XY av.Z"
|
||||||
|
#define MSG_ZPROBE_ZOFFSET "Offset Z"
|
||||||
|
#define MSG_BABYSTEP_X "Babystep X"
|
||||||
|
#define MSG_BABYSTEP_Y "Babystep Y"
|
||||||
|
#define MSG_BABYSTEP_Z "Babystep Z"
|
||||||
|
#define MSG_ENDSTOP_ABORT "Butee abandon"
|
||||||
|
|
||||||
#define WELCOME_MSG MACHINE_NAME " prete."
|
#define MSG_RECTRACT "Rectract"
|
||||||
#define MSG_SD_INSERTED "Carte inseree"
|
#define MSG_STEPPER_RELEASED "RELACHE."
|
||||||
#define MSG_SD_REMOVED "Carte retiree"
|
|
||||||
#define MSG_MAIN "Menu principal"
|
|
||||||
#define MSG_AUTOSTART "Demarrage auto"
|
|
||||||
#define MSG_DISABLE_STEPPERS "Arreter moteurs"
|
|
||||||
#define MSG_AUTO_HOME "Home auto."
|
|
||||||
#define MSG_SET_HOME_OFFSETS "Set home offsets"
|
|
||||||
#define MSG_SET_ORIGIN "Regler origine"
|
|
||||||
#define MSG_PREHEAT_PLA " Prechauffage PLA"
|
|
||||||
#define MSG_PREHEAT_PLA0 "Prechauff. PLA 1"
|
|
||||||
#define MSG_PREHEAT_PLA1 "Prechauff. PLA 2"
|
|
||||||
#define MSG_PREHEAT_PLA2 "Prechauff. PLA 3"
|
|
||||||
#define MSG_PREHEAT_PLA012 "Prech. PLA Tout"
|
|
||||||
#define MSG_PREHEAT_PLA_BEDONLY "Prech. PLA Plateau"
|
|
||||||
#define MSG_PREHEAT_PLA_SETTINGS "Regl. prech. PLA"
|
|
||||||
#define MSG_PREHEAT_ABS "Prechauffage ABS"
|
|
||||||
#define MSG_PREHEAT_ABS0 "Prechauff. ABS 1"
|
|
||||||
#define MSG_PREHEAT_ABS1 "Prechauff. ABS 2"
|
|
||||||
#define MSG_PREHEAT_ABS2 "Prechauff. ABS 3"
|
|
||||||
#define MSG_PREHEAT_ABS012 "Prech. ABS Tout"
|
|
||||||
#define MSG_PREHEAT_ABS_BEDONLY "Prech. ABS Plateau"
|
|
||||||
#define MSG_PREHEAT_ABS_SETTINGS "Regl. prech. ABS"
|
|
||||||
#define MSG_COOLDOWN "Refroidir"
|
|
||||||
#define MSG_SWITCH_PS_ON "Allumer alim."
|
|
||||||
#define MSG_SWITCH_PS_OFF "Eteindre alim."
|
|
||||||
#define MSG_EXTRUDE "Extrusion"
|
|
||||||
#define MSG_RETRACT "Retraction"
|
|
||||||
#define MSG_PREHEAT_PLA "Prechauffage PLA"
|
|
||||||
#define MSG_PREHEAT_ABS "Prechauffage ABS"
|
|
||||||
#define MSG_MOVE_AXIS "Deplacer un axe"
|
|
||||||
#define MSG_MOVE_X "Move X"
|
|
||||||
#define MSG_MOVE_Y "Move Y"
|
|
||||||
#define MSG_MOVE_Z "Move Z"
|
|
||||||
#define MSG_MOVE_E "Extruder"
|
|
||||||
#define MSG_MOVE_E1 "Extruder2"
|
|
||||||
#define MSG_MOVE_E2 "Extruder3"
|
|
||||||
#define MSG_MOVE_01MM "Move 0.1mm"
|
|
||||||
#define MSG_MOVE_1MM "Move 1mm"
|
|
||||||
#define MSG_MOVE_10MM "Move 10mm"
|
|
||||||
#define MSG_SPEED " Vitesse"
|
|
||||||
#define MSG_NOZZLE "Buse"
|
|
||||||
#define MSG_NOZZLE1 "Buse2"
|
|
||||||
#define MSG_NOZZLE2 "Buse3"
|
|
||||||
#define MSG_BED "Plateau"
|
|
||||||
#define MSG_FAN_SPEED "Vite. ventilateur"
|
|
||||||
#define MSG_FLOW "Flux"
|
|
||||||
#define MSG_FLOW0 "Flux 0"
|
|
||||||
#define MSG_FLOW1 "Flux 1"
|
|
||||||
#define MSG_FLOW2 "Flux 2"
|
|
||||||
#define MSG_CONTROL "Controler"
|
|
||||||
#define MSG_MIN " \002 Min"
|
|
||||||
#define MSG_MAX " \002 Max"
|
|
||||||
#define MSG_FACTOR " \002 Facteur"
|
|
||||||
#define MSG_AUTOTEMP "Temp. Auto."
|
|
||||||
#define MSG_ON "Marche "
|
|
||||||
#define MSG_OFF "Arret"
|
|
||||||
#define MSG_PID_P "PID-P"
|
|
||||||
#define MSG_PID_I "PID-I"
|
|
||||||
#define MSG_PID_D "PID-D"
|
|
||||||
#define MSG_PID_C "PID-C"
|
|
||||||
#define MSG_ACC "Accel"
|
|
||||||
#define MSG_VXY_JERK "Vxy-jerk"
|
|
||||||
#define MSG_VZ_JERK "Vz-jerk"
|
|
||||||
#define MSG_VE_JERK "Ve-jerk"
|
|
||||||
#define MSG_VMAX "Vmax"
|
|
||||||
#define MSG_X "x"
|
|
||||||
#define MSG_Y "y"
|
|
||||||
#define MSG_Z "z"
|
|
||||||
#define MSG_E "e"
|
|
||||||
#define MSG_VMIN "Vmin"
|
|
||||||
#define MSG_VTRAV_MIN "Vdepl min"
|
|
||||||
#define MSG_AMAX "Amax "
|
|
||||||
#define MSG_A_RETRACT "A-retract"
|
|
||||||
#define MSG_XSTEPS "Xpas/mm"
|
|
||||||
#define MSG_YSTEPS "Ypas/mm"
|
|
||||||
#define MSG_ZSTEPS "Zpas/mm"
|
|
||||||
#define MSG_ESTEPS "Epas/mm"
|
|
||||||
#define MSG_TEMPERATURE "Temperature"
|
|
||||||
#define MSG_MOTION "Mouvement"
|
|
||||||
#define MSG_CONTRAST "Contraste LCD"
|
|
||||||
#define MSG_STORE_EPROM "Sauver config"
|
|
||||||
#define MSG_LOAD_EPROM "Lire config"
|
|
||||||
#define MSG_RESTORE_FAILSAFE "Restaurer defauts"
|
|
||||||
#define MSG_REFRESH "Actualiser"
|
|
||||||
#define MSG_WATCH "Surveiller"
|
|
||||||
#define MSG_PREPARE "Preparer"
|
|
||||||
#define MSG_TUNE "Regler"
|
|
||||||
#define MSG_PAUSE_PRINT "Interrompre impr."
|
|
||||||
#define MSG_RESUME_PRINT "Reprendre impr."
|
|
||||||
#define MSG_STOP_PRINT "Arreter impr."
|
|
||||||
#define MSG_CARD_MENU "Impr. depuis SD"
|
|
||||||
#define MSG_NO_CARD "Pas de carte"
|
|
||||||
#define MSG_DWELL "Repos..."
|
|
||||||
#define MSG_USERWAIT "Atten. de l'util."
|
|
||||||
#define MSG_RESUMING "Repri. de l'impr."
|
|
||||||
#define MSG_PRINT_ABORTED "Print aborted"
|
|
||||||
#define MSG_NO_MOVE "Aucun mouvement."
|
|
||||||
#define MSG_KILLED "MORT."
|
|
||||||
#define MSG_STOPPED "STOPPE."
|
|
||||||
#define MSG_STEPPER_RELEASED "RELACHE."
|
|
||||||
#define MSG_CONTROL_RETRACT "Retraction mm"
|
|
||||||
#define MSG_CONTROL_RETRACT_SWAP "Ech. Retr. mm"
|
|
||||||
#define MSG_CONTROL_RETRACTF "Retraction V"
|
|
||||||
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
|
|
||||||
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
|
|
||||||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Ech. UnRet +mm"
|
|
||||||
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
|
|
||||||
#define MSG_AUTORETRACT "Retract. Auto."
|
|
||||||
#define MSG_FILAMENTCHANGE "Changer filament"
|
|
||||||
#define MSG_INIT_SDCARD "Init. la carte SD"
|
|
||||||
#define MSG_CNG_SDCARD "Changer de carte"
|
|
||||||
#define MSG_ZPROBE_OUT "Z sonde exte. lit"
|
|
||||||
#define MSG_POSITION_UNKNOWN "Rev. dans XY av.Z"
|
|
||||||
#define MSG_ZPROBE_ZOFFSET "Offset Z"
|
|
||||||
#define MSG_BABYSTEP_X "Babystep X"
|
|
||||||
#define MSG_BABYSTEP_Y "Babystep Y"
|
|
||||||
#define MSG_BABYSTEP_Z "Babystep Z"
|
|
||||||
#define MSG_ENDSTOP_ABORT "Butee abandon"
|
|
||||||
#define MSG_CONTRAST "Contrast"
|
|
||||||
|
|
||||||
#endif // LANGUAGE_FR_H
|
#endif // LANGUAGE_FR_H
|
||||||
|
|||||||
@ -1,9 +1,13 @@
|
|||||||
|
/**
|
||||||
|
* Italian
|
||||||
|
*
|
||||||
|
* LCD Menu Messages
|
||||||
|
* Please note these are limited to 17 characters!
|
||||||
|
*
|
||||||
|
*/
|
||||||
#ifndef LANGUAGE_IT_H
|
#ifndef LANGUAGE_IT_H
|
||||||
#define LANGUAGE_IT_H
|
#define LANGUAGE_IT_H
|
||||||
|
|
||||||
// LCD Menu Messages
|
|
||||||
// Please note these are limited to 17 characters!
|
|
||||||
|
|
||||||
#define WELCOME_MSG MACHINE_NAME " pronto."
|
#define WELCOME_MSG MACHINE_NAME " pronto."
|
||||||
#define MSG_SD_INSERTED "SD Card inserita"
|
#define MSG_SD_INSERTED "SD Card inserita"
|
||||||
#define MSG_SD_REMOVED "SD Card rimossa"
|
#define MSG_SD_REMOVED "SD Card rimossa"
|
||||||
@ -80,7 +84,6 @@
|
|||||||
#define MSG_YSTEPS "Ypassi/mm"
|
#define MSG_YSTEPS "Ypassi/mm"
|
||||||
#define MSG_ZSTEPS "Zpassi/mm"
|
#define MSG_ZSTEPS "Zpassi/mm"
|
||||||
#define MSG_ESTEPS "Epassi/mm"
|
#define MSG_ESTEPS "Epassi/mm"
|
||||||
#define MSG_RECTRACT "Ritrai"
|
|
||||||
#define MSG_TEMPERATURE "Temperatura"
|
#define MSG_TEMPERATURE "Temperatura"
|
||||||
#define MSG_MOTION "Movimento"
|
#define MSG_MOTION "Movimento"
|
||||||
#define MSG_CONTRAST "LCD contrast"
|
#define MSG_CONTRAST "LCD contrast"
|
||||||
@ -121,6 +124,7 @@
|
|||||||
#define MSG_BABYSTEP_Y "Babystep Y"
|
#define MSG_BABYSTEP_Y "Babystep Y"
|
||||||
#define MSG_BABYSTEP_Z "Babystep Z"
|
#define MSG_BABYSTEP_Z "Babystep Z"
|
||||||
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
||||||
#define MSG_CONTRAST "Contrast"
|
|
||||||
|
#define MSG_RECTRACT "Ritrai"
|
||||||
|
|
||||||
#endif // LANGUAGE_IT_H
|
#endif // LANGUAGE_IT_H
|
||||||
|
|||||||
@ -1,9 +1,13 @@
|
|||||||
|
/**
|
||||||
|
* Dutch
|
||||||
|
*
|
||||||
|
* LCD Menu Messages
|
||||||
|
* Please note these are limited to 17 characters!
|
||||||
|
*
|
||||||
|
*/
|
||||||
#ifndef LANGUAGE_NL_H
|
#ifndef LANGUAGE_NL_H
|
||||||
#define LANGUAGE_NL_H
|
#define LANGUAGE_NL_H
|
||||||
|
|
||||||
// LCD Menu Messages
|
|
||||||
// Please note these are limited to 17 characters!
|
|
||||||
|
|
||||||
#define WELCOME_MSG MACHINE_NAME " gereed."
|
#define WELCOME_MSG MACHINE_NAME " gereed."
|
||||||
#define MSG_SD_INSERTED "Kaart ingestoken"
|
#define MSG_SD_INSERTED "Kaart ingestoken"
|
||||||
#define MSG_SD_REMOVED "Kaart verwijderd"
|
#define MSG_SD_REMOVED "Kaart verwijderd"
|
||||||
@ -80,7 +84,6 @@
|
|||||||
#define MSG_YSTEPS "Ysteps/mm"
|
#define MSG_YSTEPS "Ysteps/mm"
|
||||||
#define MSG_ZSTEPS "Zsteps/mm"
|
#define MSG_ZSTEPS "Zsteps/mm"
|
||||||
#define MSG_ESTEPS "Esteps/mm"
|
#define MSG_ESTEPS "Esteps/mm"
|
||||||
#define MSG_RECTRACT "Terugtrekken"
|
|
||||||
#define MSG_TEMPERATURE "Temperatuur"
|
#define MSG_TEMPERATURE "Temperatuur"
|
||||||
#define MSG_MOTION "Beweging"
|
#define MSG_MOTION "Beweging"
|
||||||
#define MSG_CONTRAST "LCD contrast"
|
#define MSG_CONTRAST "LCD contrast"
|
||||||
@ -122,4 +125,6 @@
|
|||||||
#define MSG_BABYSTEP_Z "Babystap Z"
|
#define MSG_BABYSTEP_Z "Babystap Z"
|
||||||
#define MSG_ENDSTOP_ABORT "Endstop afbr."
|
#define MSG_ENDSTOP_ABORT "Endstop afbr."
|
||||||
|
|
||||||
|
#define MSG_RECTRACT "Terugtrekken"
|
||||||
|
|
||||||
#endif // LANGUAGE_NL_H
|
#endif // LANGUAGE_NL_H
|
||||||
|
|||||||
@ -1,128 +1,131 @@
|
|||||||
|
/**
|
||||||
|
* Polish
|
||||||
|
*
|
||||||
|
* LCD Menu Messages
|
||||||
|
* Please note these are limited to 17 characters!
|
||||||
|
*
|
||||||
|
*/
|
||||||
#ifndef LANGUAGE_PL_H
|
#ifndef LANGUAGE_PL_H
|
||||||
#define LANGUAGE_PL_H
|
#define LANGUAGE_PL_H
|
||||||
|
|
||||||
// LCD Menu Messages
|
#define WELCOME_MSG MACHINE_NAME " gotowy."
|
||||||
// Please note these are limited to 17 characters!
|
#define MSG_SD_INSERTED "Karta wlozona"
|
||||||
|
#define MSG_SD_REMOVED "Karta usunieta"
|
||||||
|
#define MSG_MAIN "Menu glowne"
|
||||||
|
#define MSG_AUTOSTART "Autostart"
|
||||||
|
#define MSG_DISABLE_STEPPERS "Wylacz silniki"
|
||||||
|
#define MSG_AUTO_HOME "Auto. poz. zerowa"
|
||||||
|
#define MSG_SET_HOME_OFFSETS "Set home offsets"
|
||||||
|
#define MSG_SET_ORIGIN "Ustaw punkt zero"
|
||||||
|
#define MSG_PREHEAT_PLA "Rozgrzej PLA"
|
||||||
|
#define MSG_PREHEAT_PLA0 "Rozgrzej PLA 1"
|
||||||
|
#define MSG_PREHEAT_PLA1 "Rozgrzej PLA 2"
|
||||||
|
#define MSG_PREHEAT_PLA2 "Rozgrzej PLA 3"
|
||||||
|
#define MSG_PREHEAT_PLA012 "Roz. PLA Wszystko"
|
||||||
|
#define MSG_PREHEAT_PLA_BEDONLY "Rozgrzej PLA Loze"
|
||||||
|
#define MSG_PREHEAT_PLA_SETTINGS "Ustaw. rozg. PLA"
|
||||||
|
#define MSG_PREHEAT_ABS "Rozgrzej ABS"
|
||||||
|
#define MSG_PREHEAT_ABS0 "Rozgrzej ABS 1"
|
||||||
|
#define MSG_PREHEAT_ABS1 "Rozgrzej ABS 2"
|
||||||
|
#define MSG_PREHEAT_ABS2 "Rozgrzej ABS 3"
|
||||||
|
#define MSG_PREHEAT_ABS012 "Roz. ABS Wszystko"
|
||||||
|
#define MSG_PREHEAT_ABS_BEDONLY "Rozgrzej ABS Loze"
|
||||||
|
#define MSG_PREHEAT_ABS_SETTINGS "Ustaw. rozg. ABS"
|
||||||
|
#define MSG_COOLDOWN "Chlodzenie"
|
||||||
|
#define MSG_SWITCH_PS_ON "Wlacz zasilacz"
|
||||||
|
#define MSG_SWITCH_PS_OFF "Wylacz zasilacz"
|
||||||
|
#define MSG_EXTRUDE "Ekstruzja"
|
||||||
|
#define MSG_RETRACT "Cofanie"
|
||||||
|
#define MSG_MOVE_AXIS "Ruch osi"
|
||||||
|
#define MSG_MOVE_X "Przesun w X"
|
||||||
|
#define MSG_MOVE_Y "Przesun w Y"
|
||||||
|
#define MSG_MOVE_Z "Przesun w Z"
|
||||||
|
#define MSG_MOVE_E "Ekstruzja (os E)"
|
||||||
|
#define MSG_MOVE_E1 "Extruder2"
|
||||||
|
#define MSG_MOVE_E2 "Extruder3"
|
||||||
|
#define MSG_MOVE_01MM "Przesuwaj co .1mm"
|
||||||
|
#define MSG_MOVE_1MM "Przesuwaj co 1mm"
|
||||||
|
#define MSG_MOVE_10MM "Przesuwaj co 10mm"
|
||||||
|
#define MSG_SPEED "Predkosc"
|
||||||
|
#define MSG_NOZZLE "Dysza"
|
||||||
|
#define MSG_NOZZLE1 "Dysza 2"
|
||||||
|
#define MSG_NOZZLE2 "Dysza 3"
|
||||||
|
#define MSG_BED "Loze"
|
||||||
|
#define MSG_FAN_SPEED "Obroty wiatraka"
|
||||||
|
#define MSG_FLOW "Przeplyw"
|
||||||
|
#define MSG_FLOW0 "Przeplyw 0"
|
||||||
|
#define MSG_FLOW1 "Przeplyw 1"
|
||||||
|
#define MSG_FLOW2 "Przeplyw 2"
|
||||||
|
#define MSG_CONTROL "Ustawienia"
|
||||||
|
#define MSG_MIN " \002 Min"
|
||||||
|
#define MSG_MAX " \002 Max"
|
||||||
|
#define MSG_FACTOR " \002 Mnoznik"
|
||||||
|
#define MSG_AUTOTEMP "Auto. temperatura"
|
||||||
|
#define MSG_ON "Wl. "
|
||||||
|
#define MSG_OFF "Wyl."
|
||||||
|
#define MSG_PID_P "PID-P"
|
||||||
|
#define MSG_PID_I "PID-I"
|
||||||
|
#define MSG_PID_D "PID-D"
|
||||||
|
#define MSG_PID_C "PID-C"
|
||||||
|
#define MSG_ACC "Przyspieszenie"
|
||||||
|
#define MSG_VXY_JERK "Zryw Vxy"
|
||||||
|
#define MSG_VZ_JERK "Zryw Vz"
|
||||||
|
#define MSG_VE_JERK "Zryw Ve"
|
||||||
|
#define MSG_VMAX "Vmax"
|
||||||
|
#define MSG_X "x"
|
||||||
|
#define MSG_Y "y"
|
||||||
|
#define MSG_Z "z"
|
||||||
|
#define MSG_E "e"
|
||||||
|
#define MSG_VMIN "Vmin"
|
||||||
|
#define MSG_VTRAV_MIN "Vskok min"
|
||||||
|
#define MSG_AMAX "Amax"
|
||||||
|
#define MSG_A_RETRACT "A-wycofanie"
|
||||||
|
#define MSG_XSTEPS "krokiX/mm"
|
||||||
|
#define MSG_YSTEPS "krokiY/mm"
|
||||||
|
#define MSG_ZSTEPS "krokiZ/mm"
|
||||||
|
#define MSG_ESTEPS "krokiE/mm"
|
||||||
|
#define MSG_TEMPERATURE "Temperatura"
|
||||||
|
#define MSG_MOTION "Ruch"
|
||||||
|
#define MSG_CONTRAST "Kontrast LCD"
|
||||||
|
#define MSG_STORE_EPROM "Zapisz w pamieci"
|
||||||
|
#define MSG_LOAD_EPROM "Wczytaj z pamieci"
|
||||||
|
#define MSG_RESTORE_FAILSAFE "Ustaw. fabryczne"
|
||||||
|
#define MSG_REFRESH "\004Odswiez"
|
||||||
|
#define MSG_WATCH "Ekran glowny"
|
||||||
|
#define MSG_PREPARE "Przygotuj"
|
||||||
|
#define MSG_TUNE "Strojenie"
|
||||||
|
#define MSG_PAUSE_PRINT "Pauza"
|
||||||
|
#define MSG_RESUME_PRINT "Wznowienie"
|
||||||
|
#define MSG_STOP_PRINT "Stop"
|
||||||
|
#define MSG_CARD_MENU "Menu karty SD"
|
||||||
|
#define MSG_NO_CARD "Brak karty"
|
||||||
|
#define MSG_DWELL "Uspij..."
|
||||||
|
#define MSG_USERWAIT "Oczekiwanie..."
|
||||||
|
#define MSG_RESUMING "Wznawianie druku"
|
||||||
|
#define MSG_PRINT_ABORTED "Print aborted"
|
||||||
|
#define MSG_NO_MOVE "Brak ruchu"
|
||||||
|
#define MSG_KILLED "Ubity. "
|
||||||
|
#define MSG_STOPPED "Zatrzymany. "
|
||||||
|
#define MSG_CONTROL_RETRACT "Wycofaj mm"
|
||||||
|
#define MSG_CONTROL_RETRACT_SWAP "Z Wycof. mm"
|
||||||
|
#define MSG_CONTROL_RETRACTF "Wycofaj V"
|
||||||
|
#define MSG_CONTROL_RETRACT_ZLIFT "Skok Z mm:"
|
||||||
|
#define MSG_CONTROL_RETRACT_RECOVER "Cof. wycof. +mm"
|
||||||
|
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Z Cof. wyc. +mm"
|
||||||
|
#define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof. V"
|
||||||
|
#define MSG_AUTORETRACT "Auto. wycofanie"
|
||||||
|
#define MSG_FILAMENTCHANGE "Zmien filament"
|
||||||
|
#define MSG_INIT_SDCARD "Inicjal. karty SD"
|
||||||
|
#define MSG_CNG_SDCARD "Zmiana karty SD"
|
||||||
|
#define MSG_ZPROBE_OUT "Sonda Z za lozem"
|
||||||
|
#define MSG_POSITION_UNKNOWN "Wroc w XY przed Z"
|
||||||
|
#define MSG_ZPROBE_ZOFFSET "Offset Z"
|
||||||
|
#define MSG_BABYSTEP_X "Babystep X"
|
||||||
|
#define MSG_BABYSTEP_Y "Babystep Y"
|
||||||
|
#define MSG_BABYSTEP_Z "Babystep Z"
|
||||||
|
#define MSG_ENDSTOP_ABORT "Blad wyl. kranc."
|
||||||
|
|
||||||
#define WELCOME_MSG MACHINE_NAME " gotowy."
|
#define MSG_RECTRACT "Wycofanie"
|
||||||
#define MSG_SD_INSERTED "Karta wlozona"
|
#define MSG_STEPPER_RELEASED "Zwolniony."
|
||||||
#define MSG_SD_REMOVED "Karta usunieta"
|
|
||||||
#define MSG_MAIN "Menu glowne"
|
|
||||||
#define MSG_AUTOSTART "Autostart"
|
|
||||||
#define MSG_DISABLE_STEPPERS "Wylacz silniki"
|
|
||||||
#define MSG_AUTO_HOME "Auto. poz. zerowa"
|
|
||||||
#define MSG_SET_HOME_OFFSETS "Set home offsets"
|
|
||||||
#define MSG_SET_ORIGIN "Ustaw punkt zero"
|
|
||||||
#define MSG_PREHEAT_PLA "Rozgrzej PLA"
|
|
||||||
#define MSG_PREHEAT_PLA0 "Rozgrzej PLA 1"
|
|
||||||
#define MSG_PREHEAT_PLA1 "Rozgrzej PLA 2"
|
|
||||||
#define MSG_PREHEAT_PLA2 "Rozgrzej PLA 3"
|
|
||||||
#define MSG_PREHEAT_PLA012 "Roz. PLA Wszystko"
|
|
||||||
#define MSG_PREHEAT_PLA_BEDONLY "Rozgrzej PLA Loze"
|
|
||||||
#define MSG_PREHEAT_PLA_SETTINGS "Ustaw. rozg. PLA"
|
|
||||||
#define MSG_PREHEAT_ABS "Rozgrzej ABS"
|
|
||||||
#define MSG_PREHEAT_ABS0 "Rozgrzej ABS 1"
|
|
||||||
#define MSG_PREHEAT_ABS1 "Rozgrzej ABS 2"
|
|
||||||
#define MSG_PREHEAT_ABS2 "Rozgrzej ABS 3"
|
|
||||||
#define MSG_PREHEAT_ABS012 "Roz. ABS Wszystko"
|
|
||||||
#define MSG_PREHEAT_ABS_BEDONLY "Rozgrzej ABS Loze"
|
|
||||||
#define MSG_PREHEAT_ABS_SETTINGS "Ustaw. rozg. ABS"
|
|
||||||
#define MSG_COOLDOWN "Chlodzenie"
|
|
||||||
#define MSG_SWITCH_PS_ON "Wlacz zasilacz"
|
|
||||||
#define MSG_SWITCH_PS_OFF "Wylacz zasilacz"
|
|
||||||
#define MSG_EXTRUDE "Ekstruzja"
|
|
||||||
#define MSG_RETRACT "Cofanie"
|
|
||||||
#define MSG_MOVE_AXIS "Ruch osi"
|
|
||||||
#define MSG_MOVE_X "Przesun w X"
|
|
||||||
#define MSG_MOVE_Y "Przesun w Y"
|
|
||||||
#define MSG_MOVE_Z "Przesun w Z"
|
|
||||||
#define MSG_MOVE_E "Ekstruzja (os E)"
|
|
||||||
#define MSG_MOVE_E1 "Extruder2"
|
|
||||||
#define MSG_MOVE_E2 "Extruder3"
|
|
||||||
#define MSG_MOVE_01MM "Przesuwaj co .1mm"
|
|
||||||
#define MSG_MOVE_1MM "Przesuwaj co 1mm"
|
|
||||||
#define MSG_MOVE_10MM "Przesuwaj co 10mm"
|
|
||||||
#define MSG_SPEED "Predkosc"
|
|
||||||
#define MSG_NOZZLE "Dysza"
|
|
||||||
#define MSG_NOZZLE1 "Dysza 2"
|
|
||||||
#define MSG_NOZZLE2 "Dysza 3"
|
|
||||||
#define MSG_BED "Loze"
|
|
||||||
#define MSG_FAN_SPEED "Obroty wiatraka"
|
|
||||||
#define MSG_FLOW "Przeplyw"
|
|
||||||
#define MSG_FLOW0 "Przeplyw 0"
|
|
||||||
#define MSG_FLOW1 "Przeplyw 1"
|
|
||||||
#define MSG_FLOW2 "Przeplyw 2"
|
|
||||||
#define MSG_CONTROL "Kontrola"
|
|
||||||
#define MSG_MIN " \002 Min"
|
|
||||||
#define MSG_MAX " \002 Max"
|
|
||||||
#define MSG_FACTOR " \002 Mnoznik"
|
|
||||||
#define MSG_AUTOTEMP "Auto. temperatura"
|
|
||||||
#define MSG_ON "Wl. "
|
|
||||||
#define MSG_OFF "Wyl."
|
|
||||||
#define MSG_PID_P "PID-P"
|
|
||||||
#define MSG_PID_I "PID-I"
|
|
||||||
#define MSG_PID_D "PID-D"
|
|
||||||
#define MSG_PID_C "PID-C"
|
|
||||||
#define MSG_ACC "Przyspieszenie"
|
|
||||||
#define MSG_VXY_JERK "Zryw Vxy"
|
|
||||||
#define MSG_VZ_JERK "Zryw Vz"
|
|
||||||
#define MSG_VE_JERK "Zryw Ve"
|
|
||||||
#define MSG_VMAX "Vmax"
|
|
||||||
#define MSG_X "x"
|
|
||||||
#define MSG_Y "y"
|
|
||||||
#define MSG_Z "z"
|
|
||||||
#define MSG_E "e"
|
|
||||||
#define MSG_VMIN "Vmin"
|
|
||||||
#define MSG_VTRAV_MIN "Vskok min"
|
|
||||||
#define MSG_AMAX "Amax"
|
|
||||||
#define MSG_A_RETRACT "A-wycofanie"
|
|
||||||
#define MSG_XSTEPS "krokiX/mm"
|
|
||||||
#define MSG_YSTEPS "krokiY/mm"
|
|
||||||
#define MSG_ZSTEPS "krokiZ/mm"
|
|
||||||
#define MSG_ESTEPS "krokiE/mm"
|
|
||||||
#define MSG_RECTRACT "Wycofanie"
|
|
||||||
#define MSG_TEMPERATURE "Temperatura"
|
|
||||||
#define MSG_MOTION "Ruch"
|
|
||||||
#define MSG_CONTRAST "Kontrast LCD"
|
|
||||||
#define MSG_STORE_EPROM "Zapisz w pamieci"
|
|
||||||
#define MSG_LOAD_EPROM "Wczytaj z pamieci"
|
|
||||||
#define MSG_RESTORE_FAILSAFE "Ustaw. fabryczne"
|
|
||||||
#define MSG_REFRESH "\004Odswiez"
|
|
||||||
#define MSG_WATCH "Ekran glowny"
|
|
||||||
#define MSG_PREPARE "Przygotuj"
|
|
||||||
#define MSG_CONTROL "Ustawienia"
|
|
||||||
#define MSG_TUNE "Strojenie"
|
|
||||||
#define MSG_PAUSE_PRINT "Pauza"
|
|
||||||
#define MSG_RESUME_PRINT "Wznowienie"
|
|
||||||
#define MSG_STOP_PRINT "Stop"
|
|
||||||
#define MSG_CARD_MENU "Menu karty SD"
|
|
||||||
#define MSG_NO_CARD "Brak karty"
|
|
||||||
#define MSG_DWELL "Uspij..."
|
|
||||||
#define MSG_USERWAIT "Oczekiwanie..."
|
|
||||||
#define MSG_RESUMING "Wznawianie druku"
|
|
||||||
#define MSG_PRINT_ABORTED "Print aborted"
|
|
||||||
#define MSG_NO_MOVE "Brak ruchu"
|
|
||||||
#define MSG_KILLED "Ubity. "
|
|
||||||
#define MSG_STOPPED "Zatrzymany. "
|
|
||||||
#define MSG_STEPPER_RELEASED "Zwolniony."
|
|
||||||
#define MSG_CONTROL_RETRACT "Wycofaj mm"
|
|
||||||
#define MSG_CONTROL_RETRACT_SWAP "Z Wycof. mm"
|
|
||||||
#define MSG_CONTROL_RETRACTF "Wycofaj V"
|
|
||||||
#define MSG_CONTROL_RETRACT_ZLIFT "Skok Z mm:"
|
|
||||||
#define MSG_CONTROL_RETRACT_RECOVER "Cof. wycof. +mm"
|
|
||||||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Z Cof. wyc. +mm"
|
|
||||||
#define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof. V"
|
|
||||||
#define MSG_AUTORETRACT "Auto. wycofanie"
|
|
||||||
#define MSG_FILAMENTCHANGE "Zmien filament"
|
|
||||||
#define MSG_INIT_SDCARD "Inicjal. karty SD"
|
|
||||||
#define MSG_CNG_SDCARD "Zmiana karty SD"
|
|
||||||
#define MSG_ZPROBE_OUT "Sonda Z za lozem"
|
|
||||||
#define MSG_POSITION_UNKNOWN "Wroc w XY przed Z"
|
|
||||||
#define MSG_ZPROBE_ZOFFSET "Offset Z"
|
|
||||||
#define MSG_BABYSTEP_X "Babystep X"
|
|
||||||
#define MSG_BABYSTEP_Y "Babystep Y"
|
|
||||||
#define MSG_BABYSTEP_Z "Babystep Z"
|
|
||||||
#define MSG_ENDSTOP_ABORT "Blad wyl. kranc."
|
|
||||||
#define MSG_CONTRAST "Kontrast"
|
|
||||||
|
|
||||||
#endif // LANGUAGE_PL_H
|
#endif // LANGUAGE_PL_H
|
||||||
|
|||||||
@ -1,9 +1,13 @@
|
|||||||
|
/**
|
||||||
|
* Portuguese
|
||||||
|
*
|
||||||
|
* LCD Menu Messages
|
||||||
|
* Please note these are limited to 17 characters!
|
||||||
|
*
|
||||||
|
*/
|
||||||
#ifndef LANGUAGE_PT_H
|
#ifndef LANGUAGE_PT_H
|
||||||
#define LANGUAGE_PT_H
|
#define LANGUAGE_PT_H
|
||||||
|
|
||||||
// LCD Menu Messages
|
|
||||||
// Please note these are limited to 17 characters!
|
|
||||||
|
|
||||||
#define WELCOME_MSG MACHINE_NAME " pronto."
|
#define WELCOME_MSG MACHINE_NAME " pronto."
|
||||||
#define MSG_SD_INSERTED "Cartao inserido"
|
#define MSG_SD_INSERTED "Cartao inserido"
|
||||||
#define MSG_SD_REMOVED "Cartao removido"
|
#define MSG_SD_REMOVED "Cartao removido"
|
||||||
@ -80,7 +84,6 @@
|
|||||||
#define MSG_YSTEPS "Ypasso/mm:"
|
#define MSG_YSTEPS "Ypasso/mm:"
|
||||||
#define MSG_ZSTEPS "Zpasso/mm:"
|
#define MSG_ZSTEPS "Zpasso/mm:"
|
||||||
#define MSG_ESTEPS "Epasso/mm:"
|
#define MSG_ESTEPS "Epasso/mm:"
|
||||||
#define MSG_RECTRACT "Retrair"
|
|
||||||
#define MSG_TEMPERATURE "Temperatura"
|
#define MSG_TEMPERATURE "Temperatura"
|
||||||
#define MSG_MOTION "Movimento"
|
#define MSG_MOTION "Movimento"
|
||||||
#define MSG_CONTRAST "Contrast"
|
#define MSG_CONTRAST "Contrast"
|
||||||
@ -122,10 +125,11 @@
|
|||||||
#define MSG_BABYSTEP_Z "Babystep Z"
|
#define MSG_BABYSTEP_Z "Babystep Z"
|
||||||
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
||||||
|
|
||||||
|
#define MSG_RECTRACT "Retrair"
|
||||||
|
#define MSG_MAIN_WIDE "Menu Principal \003"
|
||||||
#define MSG_PREPARE_ALT "Preparar \003"
|
#define MSG_PREPARE_ALT "Preparar \003"
|
||||||
#define MSG_CONTROL_ARROW "Controle \x7E"
|
#define MSG_CONTROL_ARROW "Controle \x7E"
|
||||||
#define MSG_RETRACT_ARROW "Retrair \x7E"
|
#define MSG_RETRACT_ARROW "Retrair \x7E"
|
||||||
#define MSG_MAIN_WIDE "Menu Principal \003"
|
|
||||||
#define MSG_STEPPER_RELEASED "Lancado."
|
#define MSG_STEPPER_RELEASED "Lancado."
|
||||||
|
|
||||||
#endif // LANGUAGE_PT_H
|
#endif // LANGUAGE_PT_H
|
||||||
|
|||||||
@ -1,9 +1,13 @@
|
|||||||
|
/**
|
||||||
|
* Russian
|
||||||
|
*
|
||||||
|
* LCD Menu Messages
|
||||||
|
* Please note these are limited to 17 characters!
|
||||||
|
*
|
||||||
|
*/
|
||||||
#ifndef LANGUAGE_RU_H
|
#ifndef LANGUAGE_RU_H
|
||||||
#define LANGUAGE_RU_H
|
#define LANGUAGE_RU_H
|
||||||
|
|
||||||
// LCD Menu Messages
|
|
||||||
// Please note these are limited to 17 characters!
|
|
||||||
|
|
||||||
#define WELCOME_MSG MACHINE_NAME "Готов."
|
#define WELCOME_MSG MACHINE_NAME "Готов."
|
||||||
#define MSG_SD_INSERTED "Карта вставлена"
|
#define MSG_SD_INSERTED "Карта вставлена"
|
||||||
#define MSG_SD_REMOVED "Карта извлечена"
|
#define MSG_SD_REMOVED "Карта извлечена"
|
||||||
@ -80,7 +84,6 @@
|
|||||||
#define MSG_YSTEPS "Y шаг/mm:"
|
#define MSG_YSTEPS "Y шаг/mm:"
|
||||||
#define MSG_ZSTEPS "Z шаг/mm:"
|
#define MSG_ZSTEPS "Z шаг/mm:"
|
||||||
#define MSG_ESTEPS "E шаг/mm:"
|
#define MSG_ESTEPS "E шаг/mm:"
|
||||||
#define MSG_RECTRACT "Откат подачи \x7E"
|
|
||||||
#define MSG_TEMPERATURE "Температура \x7E"
|
#define MSG_TEMPERATURE "Температура \x7E"
|
||||||
#define MSG_MOTION "Скорости \x7E"
|
#define MSG_MOTION "Скорости \x7E"
|
||||||
#define MSG_CONTRAST "LCD contrast"
|
#define MSG_CONTRAST "LCD contrast"
|
||||||
@ -121,6 +124,7 @@
|
|||||||
#define MSG_BABYSTEP_Y "Babystep Y"
|
#define MSG_BABYSTEP_Y "Babystep Y"
|
||||||
#define MSG_BABYSTEP_Z "Babystep Z"
|
#define MSG_BABYSTEP_Z "Babystep Z"
|
||||||
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
||||||
#define MSG_CONTRAST "Contrast"
|
|
||||||
|
#define MSG_RECTRACT "Откат подачи \x7E"
|
||||||
|
|
||||||
#endif // LANGUAGE_RU_H
|
#endif // LANGUAGE_RU_H
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user