Clean up, move unused to the bottom, add headings
This commit is contained in:
Scott Lahteine
@ -73,79 +73,81 @@
|
||||
|
||||
// Serial Console Messages (do not translate those!)
|
||||
|
||||
#define MSG_Enqueing "enqueing \""
|
||||
#define MSG_POWERUP "PowerUp"
|
||||
#define MSG_EXTERNAL_RESET " External Reset"
|
||||
#define MSG_BROWNOUT_RESET " Brown out Reset"
|
||||
#define MSG_WATCHDOG_RESET " Watchdog Reset"
|
||||
#define MSG_SOFTWARE_RESET " Software Reset"
|
||||
#define MSG_AUTHOR " | Author: "
|
||||
#define MSG_CONFIGURATION_VER " Last Updated: "
|
||||
#define MSG_FREE_MEMORY " Free Memory: "
|
||||
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
||||
#define MSG_OK "ok"
|
||||
#define MSG_FILE_SAVED "Done saving file."
|
||||
#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: "
|
||||
#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
|
||||
#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
|
||||
#define MSG_Enqueing "enqueing \""
|
||||
#define MSG_POWERUP "PowerUp"
|
||||
#define MSG_EXTERNAL_RESET " External Reset"
|
||||
#define MSG_BROWNOUT_RESET " Brown out Reset"
|
||||
#define MSG_WATCHDOG_RESET " Watchdog Reset"
|
||||
#define MSG_SOFTWARE_RESET " Software Reset"
|
||||
#define MSG_AUTHOR " | Author: "
|
||||
#define MSG_CONFIGURATION_VER " Last Updated: "
|
||||
#define MSG_FREE_MEMORY " Free Memory: "
|
||||
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
||||
#define MSG_OK "ok"
|
||||
#define MSG_FILE_SAVED "Done saving file."
|
||||
#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: "
|
||||
#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
|
||||
#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
|
||||
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line: "
|
||||
#define MSG_FILE_PRINTED "Done printing file"
|
||||
#define MSG_BEGIN_FILE_LIST "Begin file list"
|
||||
#define MSG_END_FILE_LIST "End file list"
|
||||
#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
|
||||
#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
|
||||
#define MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder "
|
||||
#define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
|
||||
#define MSG_M221_INVALID_EXTRUDER "M221 Invalid extruder "
|
||||
#define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
|
||||
#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
|
||||
#define MSG_HEATING "Heating..."
|
||||
#define MSG_HEATING_COMPLETE "Heating done."
|
||||
#define MSG_BED_HEATING "Bed Heating."
|
||||
#define MSG_BED_DONE "Bed done."
|
||||
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
|
||||
#define MSG_COUNT_X " Count X: "
|
||||
#define MSG_ERR_KILLED "Printer halted. kill() called!"
|
||||
#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
|
||||
#define MSG_RESEND "Resend: "
|
||||
#define MSG_UNKNOWN_COMMAND "Unknown command: \""
|
||||
#define MSG_ACTIVE_EXTRUDER "Active Extruder: "
|
||||
#define MSG_INVALID_EXTRUDER "Invalid extruder"
|
||||
#define MSG_X_MIN "x_min: "
|
||||
#define MSG_X_MAX "x_max: "
|
||||
#define MSG_Y_MIN "y_min: "
|
||||
#define MSG_Y_MAX "y_max: "
|
||||
#define MSG_Z_MIN "z_min: "
|
||||
#define MSG_Z_MAX "z_max: "
|
||||
#define MSG_M119_REPORT "Reporting endstop status"
|
||||
#define MSG_ENDSTOP_HIT "TRIGGERED"
|
||||
#define MSG_ENDSTOP_OPEN "open"
|
||||
#define MSG_HOTEND_OFFSET "Hotend offsets:"
|
||||
#define MSG_FILE_PRINTED "Done printing file"
|
||||
#define MSG_BEGIN_FILE_LIST "Begin file list"
|
||||
#define MSG_END_FILE_LIST "End file list"
|
||||
#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
|
||||
#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
|
||||
#define MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder "
|
||||
#define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
|
||||
#define MSG_M221_INVALID_EXTRUDER "M221 Invalid extruder "
|
||||
#define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
|
||||
#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
|
||||
#define MSG_HEATING "Heating..."
|
||||
#define MSG_HEATING_COMPLETE "Heating done."
|
||||
#define MSG_BED_HEATING "Bed Heating."
|
||||
#define MSG_BED_DONE "Bed done."
|
||||
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
|
||||
#define MSG_COUNT_X " Count X: "
|
||||
#define MSG_ERR_KILLED "Printer halted. kill() called!"
|
||||
#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
|
||||
#define MSG_RESEND "Resend: "
|
||||
#define MSG_UNKNOWN_COMMAND "Unknown command: \""
|
||||
#define MSG_ACTIVE_EXTRUDER "Active Extruder: "
|
||||
#define MSG_INVALID_EXTRUDER "Invalid extruder"
|
||||
#define MSG_X_MIN "x_min: "
|
||||
#define MSG_X_MAX "x_max: "
|
||||
#define MSG_Y_MIN "y_min: "
|
||||
#define MSG_Y_MAX "y_max: "
|
||||
#define MSG_Z_MIN "z_min: "
|
||||
#define MSG_Z_MAX "z_max: "
|
||||
#define MSG_M119_REPORT "Reporting endstop status"
|
||||
#define MSG_ENDSTOP_HIT "TRIGGERED"
|
||||
#define MSG_ENDSTOP_OPEN "open"
|
||||
#define MSG_HOTEND_OFFSET "Hotend offsets:"
|
||||
|
||||
#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
|
||||
#define MSG_SD_INIT_FAIL "SD init fail"
|
||||
#define MSG_SD_VOL_INIT_FAIL "volume.init failed"
|
||||
#define MSG_SD_OPENROOT_FAIL "openRoot failed"
|
||||
#define MSG_SD_CARD_OK "SD card ok"
|
||||
#define MSG_SD_WORKDIR_FAIL "workDir open failed"
|
||||
#define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
|
||||
#define MSG_SD_FILE_OPENED "File opened: "
|
||||
#define MSG_SD_SIZE " Size: "
|
||||
#define MSG_SD_FILE_SELECTED "File selected"
|
||||
#define MSG_SD_WRITE_TO_FILE "Writing to file: "
|
||||
#define MSG_SD_PRINTING_BYTE "SD printing byte "
|
||||
#define MSG_SD_NOT_PRINTING "Not SD printing"
|
||||
#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
|
||||
#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
|
||||
#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
|
||||
#define MSG_SD_INIT_FAIL "SD init fail"
|
||||
#define MSG_SD_VOL_INIT_FAIL "volume.init failed"
|
||||
#define MSG_SD_OPENROOT_FAIL "openRoot failed"
|
||||
#define MSG_SD_CARD_OK "SD card ok"
|
||||
#define MSG_SD_WORKDIR_FAIL "workDir open failed"
|
||||
#define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
|
||||
#define MSG_SD_FILE_OPENED "File opened: "
|
||||
#define MSG_SD_SIZE " Size: "
|
||||
#define MSG_SD_FILE_SELECTED "File selected"
|
||||
#define MSG_SD_WRITE_TO_FILE "Writing to file: "
|
||||
#define MSG_SD_PRINTING_BYTE "SD printing byte "
|
||||
#define MSG_SD_NOT_PRINTING "Not SD printing"
|
||||
#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
|
||||
#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
|
||||
|
||||
#define MSG_STEPPER_TOO_HIGH "Steprate too high: "
|
||||
#define MSG_ENDSTOPS_HIT "endstops hit: "
|
||||
#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
|
||||
#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
|
||||
#define MSG_BABYSTEPPING_X "Babystepping X"
|
||||
#define MSG_BABYSTEPPING_Y "Babystepping Y"
|
||||
#define MSG_BABYSTEPPING_Z "Babystepping Z"
|
||||
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
|
||||
#define MSG_STEPPER_TOO_HIGH "Steprate too high: "
|
||||
#define MSG_ENDSTOPS_HIT "endstops hit: "
|
||||
#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
|
||||
#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
|
||||
#define MSG_BABYSTEPPING_X "Babystepping X"
|
||||
#define MSG_BABYSTEPPING_Y "Babystepping Y"
|
||||
#define MSG_BABYSTEPPING_Z "Babystepping Z"
|
||||
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
|
||||
|
||||
// LCD Menu Messages
|
||||
|
||||
#if LANGUAGE_CHOICE == en // English
|
||||
#include "language_en.h"
|
||||
@ -175,4 +177,4 @@
|
||||
#include "language_eu.h"
|
||||
#endif
|
||||
|
||||
#endif // ifndef LANGUAGE_H
|
||||
#endif //__LANGUAGE_H
|
||||
|
||||
Reference in New Issue
Block a user