HAL folder organization (#14763)

This commit is contained in:
Scott Lahteine 2019-07-28 23:55:24 -05:00 committed by GitHub
parent eefe3f595a
commit e5d73f68c8
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
66 changed files with 865 additions and 107 deletions

View File

@ -21,34 +21,6 @@
*/ */
#pragma once #pragma once
#ifdef __AVR__ #include "platforms.h"
#define HAL_PLATFORM HAL_AVR
#elif defined(ARDUINO_ARCH_SAM)
#define HAL_PLATFORM HAL_DUE
#elif defined(__MK20DX256__)
#define HAL_PLATFORM HAL_TEENSY31_32
#elif defined(__MK64FX512__) || defined(__MK66FX1M0__)
#define HAL_PLATFORM HAL_TEENSY35_36
#elif defined(TARGET_LPC1768)
#define HAL_PLATFORM HAL_LPC1768
#elif defined(__STM32F1__) || defined(TARGET_STM32F1)
#define HAL_PLATFORM HAL_STM32F1
#elif defined(STM32GENERIC) && (defined(STM32F4) || defined(STM32F7))
#define HAL_PLATFORM HAL_STM32_F4_F7
#elif defined(ARDUINO_ARCH_STM32)
#define HAL_PLATFORM HAL_STM32
#elif defined(ARDUINO_ARCH_ESP32)
#define HAL_PLATFORM HAL_ESP32
#elif defined(__PLAT_LINUX__)
#define HAL_PLATFORM HAL_LINUX
#elif defined(__SAMD51__)
#define HAL_PLATFORM HAL_SAMD51
#else
#error "Unsupported Platform!"
#endif
#define XSTR_(M) #M
#define XSTR(M) XSTR_(M)
#define HAL_PATH(PATH, NAME) XSTR(PATH/HAL_PLATFORM/NAME)
#include HAL_PATH(.,HAL.h) #include HAL_PATH(.,HAL.h)

View File

@ -29,7 +29,7 @@
* Logical Pin : 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 | 78 79 80 xx xx 84 85 71 70 xx xx xx xx xx 81 82 83 xx xx 72 72 75 76 77 74 xx xx xx xx xx * Logical Pin : 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 | 78 79 80 xx xx 84 85 71 70 xx xx xx xx xx 81 82 83 xx xx 72 72 75 76 77 74 xx xx xx xx xx
*/ */
#include "fastio_AVR.h" #include "../fastio_AVR.h"
// change for your board // change for your board
#define DEBUG_LED DIO21 #define DEBUG_LED DIO21

View File

@ -28,7 +28,7 @@
* Port: A0 A1 A2 A3 A4 A5 A6 A7 B0 B1 B2 B3 B4 B5 B6 B7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 E0 E1 E2 E3 E4 E5 E6 E7 F0 F1 F2 F3 F4 F5 F6 F7 G0 G1 G2 G3 G4 G5 * Port: A0 A1 A2 A3 A4 A5 A6 A7 B0 B1 B2 B3 B4 B5 B6 B7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 E0 E1 E2 E3 E4 E5 E6 E7 F0 F1 F2 F3 F4 F5 F6 F7 G0 G1 G2 G3 G4 G5
*/ */
#include "fastio_AVR.h" #include "../fastio_AVR.h"
// change for your board // change for your board
#define DEBUG_LED DIO46 #define DEBUG_LED DIO46

View File

@ -28,7 +28,7 @@
* Port: B0 B1 B2 B3 B4 B5 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 * Port: B0 B1 B2 B3 B4 B5 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7
*/ */
#include "fastio_AVR.h" #include "../fastio_AVR.h"
#define DEBUG_LED AIO5 #define DEBUG_LED AIO5

View File

@ -54,7 +54,7 @@
* +--------+ * +--------+
*/ */
#include "fastio_AVR.h" #include "../fastio_AVR.h"
#define DEBUG_LED DIO0 #define DEBUG_LED DIO0

View File

@ -29,7 +29,7 @@
* The logical pins 46 and 47 are not supported by Teensyduino, but are supported below as E2 and E3 * The logical pins 46 and 47 are not supported by Teensyduino, but are supported below as E2 and E3
*/ */
#include "fastio_AVR.h" #include "../fastio_AVR.h"
// change for your board // change for your board
#define DEBUG_LED DIO31 /* led D5 red */ #define DEBUG_LED DIO31 /* led D5 red */

View File

@ -27,8 +27,6 @@
* Contributed by Triffid_Hunter and modified by Kliment, thinkyhead, Bob-the-Kuhn, et.al. * Contributed by Triffid_Hunter and modified by Kliment, thinkyhead, Bob-the-Kuhn, et.al.
*/ */
#include "../../core/macros.h"
#include <avr/io.h> #include <avr/io.h>
#define AVR_AT90USB1286_FAMILY (defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1286P__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB646P__) || defined(__AVR_AT90USB647__)) #define AVR_AT90USB1286_FAMILY (defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1286P__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB646P__) || defined(__AVR_AT90USB647__))
@ -41,15 +39,15 @@
* Include Ports and Functions * Include Ports and Functions
*/ */
#if AVR_ATmega328_FAMILY #if AVR_ATmega328_FAMILY
#include "fastio_168.h" #include "fastio/fastio_168.h"
#elif AVR_ATmega1284_FAMILY #elif AVR_ATmega1284_FAMILY
#include "fastio_644.h" #include "fastio/fastio_644.h"
#elif AVR_ATmega2560_FAMILY #elif AVR_ATmega2560_FAMILY
#include "fastio_1280.h" #include "fastio/fastio_1280.h"
#elif AVR_AT90USB1286_FAMILY #elif AVR_AT90USB1286_FAMILY
#include "fastio_AT90USB.h" #include "fastio/fastio_AT90USB.h"
#elif AVR_ATmega2561_FAMILY #elif AVR_ATmega2561_FAMILY
#include "fastio_1281.h" #include "fastio/fastio_1281.h"
#else #else
#error "No FastIO definition for the selected AVR Board." #error "No FastIO definition for the selected AVR Board."
#endif #endif
@ -274,6 +272,8 @@ enum ClockSource2 : char {
#define SET_FOCB(T,V) SET_FOC(T,B,V) #define SET_FOCB(T,V) SET_FOC(T,B,V)
#define SET_FOCC(T,V) SET_FOC(T,C,V) #define SET_FOCC(T,V) SET_FOC(T,C,V)
#if 0
/** /**
* PWM availability macros * PWM availability macros
*/ */
@ -337,6 +337,8 @@ enum ClockSource2 : char {
#define PWM_CHK(P) (PWM_CHK_HEATER(P) || PWM_CHK_SERVO(P) || PWM_CHK_MOTOR_CURRENT(P) || PWM_CHK_FAN_A(P) || PWM_CHK_FAN_B(P)) #define PWM_CHK(P) (PWM_CHK_HEATER(P) || PWM_CHK_SERVO(P) || PWM_CHK_MOTOR_CURRENT(P) || PWM_CHK_FAN_A(P) || PWM_CHK_FAN_B(P))
#endif // PWM_CHK is not used in Marlin
// define which hardware PWMs are available for the current CPU // define which hardware PWMs are available for the current CPU
// all timer 1 PWMS deleted from this list because they are never available // all timer 1 PWMS deleted from this list because they are never available
#if AVR_ATmega2560_FAMILY #if AVR_ATmega2560_FAMILY

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -21,58 +21,57 @@
*/ */
/* /**
* Based on u8g_com_msp430_hw_spi.c
based on u8g_com_msp430_hw_spi.c *
* Universal 8bit Graphics Library
Universal 8bit Graphics Library *
* Copyright (c) 2012, olikraus@gmail.com
Copyright (c) 2012, olikraus@gmail.com * All rights reserved.
All rights reserved. *
* Redistribution and use in source and binary forms, with or without modification,
Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met:
are permitted provided that the following conditions are met: *
* * Redistributions of source code must retain the above copyright notice, this list
* Redistributions of source code must retain the above copyright notice, this list * of conditions and the following disclaimer.
of conditions and the following disclaimer. *
* * Redistributions in binary form must reproduce the above copyright notice, this
* Redistributions in binary form must reproduce the above copyright notice, this * list of conditions and the following disclaimer in the documentation and/or other
list of conditions and the following disclaimer in the documentation and/or other * materials provided with the distribution.
materials provided with the distribution. *
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. *
*/
*/
#ifdef __SAM3X8E__ #ifdef __SAM3X8E__
#include "../../inc/MarlinConfigPre.h" #include "../../../inc/MarlinConfigPre.h"
#if HAS_GRAPHICAL_LCD #if HAS_GRAPHICAL_LCD
#include <U8glib.h> #include <U8glib.h>
#include "../../Marlin.h" #include "../../../Marlin.h"
void spiBegin(); void spiBegin();
void spiInit(uint8_t spiRate); void spiInit(uint8_t spiRate);
void spiSend(uint8_t b); void spiSend(uint8_t b);
void spiSend(const uint8_t* buf, size_t n); void spiSend(const uint8_t* buf, size_t n);
#include "../shared/Marduino.h" #include "../../shared/Marduino.h"
#include "fastio_Due.h" #include "../fastio_Due.h"
void u8g_SetPIOutput_DUE_hw_spi(u8g_t *u8g, uint8_t pin_index) { void u8g_SetPIOutput_DUE_hw_spi(u8g_t *u8g, uint8_t pin_index) {
PIO_Configure(g_APinDescription[u8g->pin_list[pin_index]].pPort, PIO_OUTPUT_1, PIO_Configure(g_APinDescription[u8g->pin_list[pin_index]].pPort, PIO_OUTPUT_1,

View File

@ -55,11 +55,11 @@
#ifdef ARDUINO_ARCH_SAM #ifdef ARDUINO_ARCH_SAM
#include "../../inc/MarlinConfigPre.h" #include "../../../inc/MarlinConfigPre.h"
#if ENABLED(U8GLIB_ST7920) #if ENABLED(U8GLIB_ST7920)
#include "../shared/Delay.h" #include "../../shared/Delay.h"
#include <U8glib.h> #include <U8glib.h>
@ -145,8 +145,8 @@ uint8_t u8g_com_HAL_DUE_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_va
} }
#if ENABLED(LIGHTWEIGHT_UI) #if ENABLED(LIGHTWEIGHT_UI)
#include "../../lcd/ultralcd.h" #include "../../../lcd/ultralcd.h"
#include "../shared/HAL_ST7920.h" #include "../../shared/HAL_ST7920.h"
#define ST7920_CS_PIN LCD_PINS_RS #define ST7920_CS_PIN LCD_PINS_RS

View File

@ -55,7 +55,7 @@
#ifdef ARDUINO_ARCH_SAM #ifdef ARDUINO_ARCH_SAM
#include "../../inc/MarlinConfigPre.h" #include "../../../inc/MarlinConfigPre.h"
#if HAS_GRAPHICAL_LCD && DISABLED(U8GLIB_ST7920) #if HAS_GRAPHICAL_LCD && DISABLED(U8GLIB_ST7920)
@ -64,8 +64,8 @@
#include "u8g_com_HAL_DUE_sw_spi_shared.h" #include "u8g_com_HAL_DUE_sw_spi_shared.h"
#include "../shared/Marduino.h" #include "../../shared/Marduino.h"
#include "../shared/Delay.h" #include "../../shared/Delay.h"
#include <U8glib.h> #include <U8glib.h>

View File

@ -55,11 +55,11 @@
#ifdef ARDUINO_ARCH_SAM #ifdef ARDUINO_ARCH_SAM
#include "../../inc/MarlinConfigPre.h" #include "../../../inc/MarlinConfigPre.h"
#if HAS_GRAPHICAL_LCD #if HAS_GRAPHICAL_LCD
#include "../shared/Delay.h" #include "../../shared/Delay.h"
#include <U8glib.h> #include <U8glib.h>

View File

@ -21,8 +21,8 @@
*/ */
#pragma once #pragma once
#include "../../inc/MarlinConfigPre.h" #include "../../../inc/MarlinConfigPre.h"
#include "../shared/Marduino.h" #include "../../shared/Marduino.h"
void u8g_SetPIOutput_DUE(u8g_t *u8g, uint8_t pin_index); void u8g_SetPIOutput_DUE(u8g_t *u8g, uint8_t pin_index);
void u8g_SetPILevel_DUE(u8g_t *u8g, uint8_t pin_index, uint8_t level); void u8g_SetPILevel_DUE(u8g_t *u8g, uint8_t pin_index, uint8_t level);

View File

@ -40,7 +40,7 @@
* Some jitter in the Vref signal is OK so the interrupt priority is left at its default value. * Some jitter in the Vref signal is OK so the interrupt priority is left at its default value.
*/ */
#include "../../inc/MarlinConfig.h" #include "../../../inc/MarlinConfig.h"
#if MB(PRINTRBOARD_G2) #if MB(PRINTRBOARD_G2)

View File

@ -26,8 +26,8 @@
* PR #7500. It is hardwired for the PRINTRBOARD_G2 Motor Current needs. * PR #7500. It is hardwired for the PRINTRBOARD_G2 Motor Current needs.
*/ */
#include "../../inc/MarlinConfigPre.h" #include "../../../inc/MarlinConfigPre.h"
#include "../../module/stepper.h" #include "../../../module/stepper.h"
//C:\Users\bobku\Documents\GitHub\Marlin-Bob-2\Marlin\src\module\stepper.h //C:\Users\bobku\Documents\GitHub\Marlin-Bob-2\Marlin\src\module\stepper.h
//C:\Users\bobku\Documents\GitHub\Marlin-Bob-2\Marlin\src\HAL\HAL_DUE\G2_PWM.h //C:\Users\bobku\Documents\GitHub\Marlin-Bob-2\Marlin\src\HAL\HAL_DUE\G2_PWM.h

View File

@ -77,7 +77,7 @@
#if MB(PRINTRBOARD_G2) #if MB(PRINTRBOARD_G2)
#include "G2_pins.h" #include "fastio/G2_pins.h"
// Set pin as input // Set pin as input
#define _SET_INPUT(IO) do{ \ #define _SET_INPUT(IO) do{ \

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -23,8 +23,8 @@
#include "../shared/Marduino.h" #include "../shared/Marduino.h"
#include "libmaple/sdio.h" #include <libmaple/sdio.h>
#include "libmaple/dma.h" #include <libmaple/dma.h>
// ------------------------ // ------------------------
// Defines // Defines

View File

@ -26,17 +26,17 @@
* Communication interface for FSMC * Communication interface for FSMC
*/ */
#include "../../inc/MarlinConfig.h" #include "../../../inc/MarlinConfig.h"
#if defined(ARDUINO_ARCH_STM32F1) && PIN_EXISTS(FSMC_CS) // FSMC on 100/144 pins SoCs #if defined(ARDUINO_ARCH_STM32F1) && PIN_EXISTS(FSMC_CS) // FSMC on 100/144 pins SoCs
#if HAS_GRAPHICAL_LCD #if HAS_GRAPHICAL_LCD
#include "U8glib.h" #include <U8glib.h>
#include "libmaple/fsmc.h" #include <libmaple/fsmc.h>
#include "libmaple/gpio.h" #include <libmaple/gpio.h>
#include "libmaple/dma.h" #include <libmaple/dma.h>
#include "boards.h" #include <boards.h>
#ifndef LCD_READ_ID #ifndef LCD_READ_ID
#define LCD_READ_ID 0x04 // Read display identification information (0xD3 on ILI9341) #define LCD_READ_ID 0x04 // Read display identification information (0xD3 on ILI9341)

View File

@ -18,11 +18,11 @@
*/ */
#ifdef __STM32F1__ #ifdef __STM32F1__
#include "../../inc/MarlinConfig.h" #include "../../../inc/MarlinConfig.h"
#if HAS_GRAPHICAL_LCD && ENABLED(FORCE_SOFT_SPI) #if HAS_GRAPHICAL_LCD && ENABLED(FORCE_SOFT_SPI)
#include "HAL.h" #include "../HAL.h"
#include <U8glib.h> #include <U8glib.h>
#undef SPI_SPEED #undef SPI_SPEED

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -0,0 +1,22 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once

View File

@ -0,0 +1,52 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#ifdef __AVR__
#define HAL_PLATFORM HAL_AVR
#elif defined(ARDUINO_ARCH_SAM)
#define HAL_PLATFORM HAL_DUE
#elif defined(__MK20DX256__)
#define HAL_PLATFORM HAL_TEENSY31_32
#elif defined(__MK64FX512__) || defined(__MK66FX1M0__)
#define HAL_PLATFORM HAL_TEENSY35_36
#elif defined(TARGET_LPC1768)
#define HAL_PLATFORM HAL_LPC1768
#elif defined(__STM32F1__) || defined(TARGET_STM32F1)
#define HAL_PLATFORM HAL_STM32F1
#elif defined(STM32GENERIC) && (defined(STM32F4) || defined(STM32F7))
#define HAL_PLATFORM HAL_STM32_F4_F7
#elif defined(ARDUINO_ARCH_STM32)
#define HAL_PLATFORM HAL_STM32
#elif defined(ARDUINO_ARCH_ESP32)
#define HAL_PLATFORM HAL_ESP32
#elif defined(__PLAT_LINUX__)
#define HAL_PLATFORM HAL_LINUX
#elif defined(__SAMD51__)
#define HAL_PLATFORM HAL_SAMD51
#else
#error "Unsupported Platform!"
#endif
#define XSTR_(M) #M
#define XSTR(M) XSTR_(M)
#define HAL_PATH(PATH, NAME) XSTR(PATH/HAL_PLATFORM/NAME)

View File

@ -30,13 +30,13 @@
#include "../HAL/HAL.h" #include "../HAL/HAL.h"
#include "../pins/pins.h" #include "../pins/pins.h"
#include HAL_PATH(../HAL, spi_pins.h) #include HAL_PATH(../HAL, spi_pins.h)
#include "Conditionals_post.h" #include "Conditionals_post.h"
#include "SanityCheck.h" #include HAL_PATH(../HAL, inc/Conditionals_post.h)
#include HAL_PATH(../HAL, SanityCheck.h) #include "SanityCheck.h"
#include HAL_PATH(../HAL, inc/SanityCheck.h)
// Include all core headers // Include all core headers
#include "../core/enum.h" #include "../core/enum.h"

View File

@ -27,12 +27,19 @@
// Prefix header to acquire configurations // Prefix header to acquire configurations
// //
#include "../HAL/platforms.h"
#include "../core/boards.h" #include "../core/boards.h"
#include "../core/macros.h" #include "../core/macros.h"
#include "../core/millis_t.h" #include "../core/millis_t.h"
#include "Version.h" #include "Version.h"
#include "../../Configuration.h" #include "../../Configuration.h"
#include "Conditionals_LCD.h" #include "Conditionals_LCD.h"
#include HAL_PATH(../HAL, inc/Conditionals_LCD.h)
#include "../core/drivers.h" #include "../core/drivers.h"
#include "../../Configuration_adv.h" #include "../../Configuration_adv.h"
#include "Conditionals_adv.h" #include "Conditionals_adv.h"
#include HAL_PATH(../HAL, inc/Conditionals_adv.h)