HAL folder organization (#14763)

Marlin/src/HAL/HAL_STM32F1/HAL_sdio_STM32F1.h

@@ -23,8 +23,8 @@
 
 #include "../shared/Marduino.h"
 
-#include "libmaple/sdio.h"
-#include "libmaple/dma.h"
+#include <libmaple/sdio.h>
+#include <libmaple/dma.h>
 
 // ------------------------
 // Defines

Marlin/src/HAL/HAL_STM32F1/dogm/u8g_com_stm32duino_fsmc.cpp

@@ -26,17 +26,17 @@
  * Communication interface for FSMC
  */
 
-#include "../../inc/MarlinConfig.h"
+#include "../../../inc/MarlinConfig.h"
 
 #if defined(ARDUINO_ARCH_STM32F1) && PIN_EXISTS(FSMC_CS) // FSMC on 100/144 pins SoCs
 
 #if HAS_GRAPHICAL_LCD
 
-#include "U8glib.h"
-#include "libmaple/fsmc.h"
-#include "libmaple/gpio.h"
-#include "libmaple/dma.h"
-#include "boards.h"
+#include <U8glib.h>
+#include <libmaple/fsmc.h>
+#include <libmaple/gpio.h>
+#include <libmaple/dma.h>
+#include <boards.h>
 
 #ifndef LCD_READ_ID
   #define LCD_READ_ID 0x04   // Read display identification information (0xD3 on ILI9341)

Marlin/src/HAL/HAL_STM32F1/dogm/u8g_com_stm32duino_swspi.cpp

@@ -18,11 +18,11 @@
  */
 #ifdef __STM32F1__
 
-#include "../../inc/MarlinConfig.h"
+#include "../../../inc/MarlinConfig.h"
 
 #if HAS_GRAPHICAL_LCD && ENABLED(FORCE_SOFT_SPI)
 
-#include "HAL.h"
+#include "../HAL.h"
 #include <U8glib.h>
 
 #undef SPI_SPEED

Marlin/src/HAL/HAL_STM32F1/inc/Conditionals_LCD.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_STM32F1/inc/Conditionals_adv.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HAL_STM32F1/inc/Conditionals_post.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once