bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Cleanup of spacing and formatting

Browse Source
This commit is contained in:
Scott Lahteine
2017-06-04 11:30:03 -05:00
parent 9f295581f0
commit e4937b0285
8 changed files with 23 additions and 18 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
Marlin/example_configurations/FolgerTech-i3-2020/Configuration_adv.h
View File

@ -788,7 +788,7 @@
#define PAUSE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers)
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
// It is a short retract used immediately after print interrupt before move to filament exchange position
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm

2
Marlin/example_configurations/M150/Configuration.h
View File

@ -318,7 +318,7 @@
#define K1 0.95 //smoothing factor within the PID
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Malyan M150 example
#define DEFAULT_Kp 29
#define DEFAULT_Ki 2

4
Marlin/example_configurations/M150/README.md
View File

@ -1,3 +1,3 @@
# Configuration for Malyan M150 hobbyking printer
# config without automatic bed level sensor
# or in other words, "as stock"
# config without automatic bed level sensor
# or in other words, "as stock"

2
Marlin/example_configurations/gCreate_gMax1.5+/Configuration_adv.h
View File

@ -788,7 +788,7 @@
#define PAUSE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers)
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // Initial retract feedrate in mm/s
#define PAUSE_PARK_RETRACT_LENGTH 2 // Initial retract in mm
// It is a short retract used immediately after print interrupt before move to filament exchange position
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // Unload filament feedrate in mm/s - filament unloading can be fast
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm