Add support for M575 (#14757)

2019-07-30 08:30:00 +01:00
parent f8aa52346f
commit e44fccf3d2
113 changed files with 395 additions and 13 deletions
--- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Alfawise/U20/Configuration_adv.h
+++ b/config/examples/Alfawise/U20/Configuration_adv.h
@ -1371,6 +1371,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Anet/A2/Configuration_adv.h
+++ b/config/examples/Anet/A2/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Anet/A2plus/Configuration_adv.h
+++ b/config/examples/Anet/A2plus/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Anet/A6/Configuration_adv.h
+++ b/config/examples/Anet/A6/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Anet/A8/Configuration_adv.h
+++ b/config/examples/Anet/A8/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Anet/A8plus/Configuration_adv.h
+++ b/config/examples/Anet/A8plus/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Anet/E16/Configuration_adv.h
+++ b/config/examples/Anet/E16/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/AnyCubic/i3/Configuration_adv.h
+++ b/config/examples/AnyCubic/i3/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/ArmEd/Configuration_adv.h
+++ b/config/examples/ArmEd/Configuration_adv.h
@ -1373,6 +1373,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/BIBO/TouchX/default/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h
@ -1377,6 +1377,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/config/examples/BQ/WITBOX/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Cartesio/Configuration_adv.h
+++ b/config/examples/Cartesio/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/config/examples/Creality/CR-10/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Creality/CR-10S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10S/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Creality/CR-10_5S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10_5S/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Creality/CR-10mini/Configuration_adv.h
+++ b/config/examples/Creality/CR-10mini/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Creality/CR-20
+++ b/config/examples/Creality/CR-20
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Creality/CR-20/Configuration_adv.h
+++ b/config/examples/Creality/CR-20/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Creality/CR-8/Configuration_adv.h
+++ b/config/examples/Creality/CR-8/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Creality/Ender-2/Configuration_adv.h
+++ b/config/examples/Creality/Ender-2/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Creality/Ender-3/Configuration_adv.h
+++ b/config/examples/Creality/Ender-3/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Creality/Ender-4/Configuration_adv.h
+++ b/config/examples/Creality/Ender-4/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Creality/Ender-5/Configuration_adv.h
+++ b/config/examples/Creality/Ender-5/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/Ultimate/Configuration_adv.h
+++ b/Ultimate/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/X1/Configuration_adv.h
+++ b/X1/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Einstart-S/Configuration_adv.h
+++ b/config/examples/Einstart-S/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/FYSETC/AIO_II/Configuration_adv.h
+++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/1.2/BLTouch/Configuration_adv.h
+++ b/1.2/BLTouch/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/FYSETC/Cheetah
+++ b/config/examples/FYSETC/Cheetah
@ -1368,6 +1368,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h
+++ b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h
@ -1368,6 +1368,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h
+++ b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h
@ -1368,6 +1368,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/FYSETC/F6_13/Configuration_adv.h
+++ b/config/examples/FYSETC/F6_13/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Felix/Configuration_adv.h
+++ b/config/examples/Felix/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
@ -1368,6 +1368,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Formbot/Raptor/Configuration_adv.h
+++ b/config/examples/Formbot/Raptor/Configuration_adv.h
@ -1371,6 +1371,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
@ -1373,6 +1373,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
@ -1373,6 +1373,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Geeetech/A10/Configuration_adv.h
+++ b/config/examples/Geeetech/A10/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Geeetech/A10M/Configuration_adv.h
+++ b/config/examples/Geeetech/A10M/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Geeetech/A20M/Configuration_adv.h
+++ b/config/examples/Geeetech/A20M/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
@ -1368,6 +1368,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Geeetech/Prusa
+++ b/config/examples/Geeetech/Prusa
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Geeetech/Prusa
+++ b/config/examples/Geeetech/Prusa
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/config/examples/Infitary/i3-M508/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/JGAurora/A1/Configuration_adv.h
+++ b/config/examples/JGAurora/A1/Configuration_adv.h
@ -1374,6 +1374,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/config/examples/JGAurora/A5/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/JGAurora/A5S/Configuration_adv.h
+++ b/config/examples/JGAurora/A5S/Configuration_adv.h
@ -1374,6 +1374,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/MakerParts/Configuration_adv.h
+++ b/config/examples/MakerParts/Configuration_adv.h
@ -1369,6 +1369,9 @@
  #define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Malyan/M150/Configuration_adv.h
+++ b/config/examples/Malyan/M150/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Malyan/M200/Configuration_adv.h
+++ b/config/examples/Malyan/M200/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Mks/Robin/Configuration_adv.h
+++ b/config/examples/Mks/Robin/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/config/examples/Mks/Sbase/Configuration_adv.h
@ -1370,6 +1370,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/RapideLite/RL200/Configuration_adv.h
+++ b/config/examples/RapideLite/RL200/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/RigidBot/Configuration_adv.h
+++ b/config/examples/RigidBot/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/SCARA/Configuration_adv.h
+++ b/config/examples/SCARA/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Sanguinololu/Configuration_adv.h
+++ b/config/examples/Sanguinololu/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Tevo/Michelangelo/Configuration_adv.h
+++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h
@ -1368,6 +1368,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Tevo/Tarantula
+++ b/config/examples/Tevo/Tarantula
@ -1365,6 +1365,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Tevo/Tornado/V1
+++ b/config/examples/Tevo/Tornado/V1
@ -1368,6 +1368,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Tevo/Tornado/V2
+++ b/config/examples/Tevo/Tornado/V2
@ -1368,6 +1368,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/TheBorg/Configuration_adv.h
+++ b/config/examples/TheBorg/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/TinyBoy2/Configuration_adv.h
+++ b/config/examples/TinyBoy2/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Tronxy/X3A/Configuration_adv.h
+++ b/config/examples/Tronxy/X3A/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/UltiMachine/Archim1/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/VORONDesign/Configuration_adv.h
+++ b/config/examples/VORONDesign/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/config/examples/Velleman/K8200/Configuration_adv.h
@ -1382,6 +1382,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/config/examples/Velleman/K8400/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/WASP/PowerWASP/Configuration_adv.h
+++ b/config/examples/WASP/PowerWASP/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Wanhao/Duplicator
+++ b/config/examples/Wanhao/Duplicator
@ -1371,6 +1371,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/Wanhao/Duplicator
+++ b/config/examples/Wanhao/Duplicator
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
@ -1371,6 +1371,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@ -1371,6 +1371,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
@ -1371,6 +1371,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@ -1371,6 +1371,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/delta/Geeetech/Rostock
+++ b/config/examples/delta/Geeetech/Rostock
@ -1371,6 +1371,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/delta/MKS/SBASE/Configuration_adv.h
+++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h
@ -1371,6 +1371,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/Monster/Configuration_adv.h
+++ b/Monster/Configuration_adv.h
@ -1371,6 +1371,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/delta/generic/Configuration_adv.h
+++ b/config/examples/delta/generic/Configuration_adv.h
@ -1371,6 +1371,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/kossel_mini/Configuration_adv.h
@ -1371,6 +1371,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/config/examples/delta/kossel_xl/Configuration_adv.h
@ -1371,6 +1371,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/makibox/Configuration_adv.h
+++ b/config/examples/makibox/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/config/examples/tvrrug/Round2/Configuration_adv.h
@ -1369,6 +1369,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.
--- a/config/examples/wt150/Configuration_adv.h
+++ b/config/examples/wt150/Configuration_adv.h
@ -1370,6 +1370,9 @@
  //#define SERIAL_XON_XOFF
 #endif

+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
 #if ENABLED(SDSUPPORT)
  // Enable this option to collect and display the maximum
  // RX queue usage after transferring a file to SD.