bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Replace digitalPinHasPWM with HAS_TIMER (#13520)

Browse Source
This commit is contained in:
Alexander Amelkin
2019-03-29 20:21:14 +03:00
committed by Scott Lahteine
parent 5a2c68e995
commit e40636a7c1
11 changed files with 49 additions and 49 deletions
Download Patch File Download Diff File Expand all files Collapse all files

12
Marlin/src/HAL/HAL_AVR/fastio_AVR.h
View File

@@ -81,9 +81,9 @@
#define _SET_INPUT(IO) CBI(DIO ## IO ## _DDR, DIO ## IO ## _PIN) #define _SET_INPUT(IO) CBI(DIO ## IO ## _DDR, DIO ## IO ## _PIN)
#define _SET_OUTPUT(IO) SBI(DIO ## IO ## _DDR, DIO ## IO ## _PIN) #define _SET_OUTPUT(IO) SBI(DIO ## IO ## _DDR, DIO ## IO ## _PIN)
#define _GET_INPUT(IO) !TEST(DIO ## IO ## _DDR, DIO ## IO ## _PIN) #define _IS_INPUT(IO) !TEST(DIO ## IO ## _DDR, DIO ## IO ## _PIN)
#define _GET_OUTPUT(IO) TEST(DIO ## IO ## _DDR, DIO ## IO ## _PIN) #define _IS_OUTPUT(IO) TEST(DIO ## IO ## _DDR, DIO ## IO ## _PIN)
#define _GET_TIMER(IO) DIO ## IO ## _PWM #define _HAS_TIMER(IO) DIO ## IO ## _PWM
// digitalRead/Write wrappers // digitalRead/Write wrappers
#ifdef FASTIO_EXT_START #ifdef FASTIO_EXT_START
@@ -104,9 +104,9 @@
#define SET_PWM(IO) SET_OUTPUT(IO) #define SET_PWM(IO) SET_OUTPUT(IO)
#define GET_INPUT(IO) _GET_INPUT(IO) #define IS_INPUT(IO) _IS_INPUT(IO)
#define GET_OUTPUT(IO) _GET_OUTPUT(IO) #define IS_OUTPUT(IO) _IS_OUTPUT(IO)
#define GET_TIMER(IO) _GET_TIMER(IO) #define HAS_TIMER(IO) _HAS_TIMER(IO)
#define OUT_WRITE(IO,V) do{ SET_OUTPUT(IO); WRITE(IO,V); }while(0) #define OUT_WRITE(IO,V) do{ SET_OUTPUT(IO); WRITE(IO,V); }while(0)

6
Marlin/src/HAL/HAL_DUE/fastio_Due.h
View File

@@ -177,11 +177,11 @@
#define SET_PWM(IO) SET_OUTPUT(IO) #define SET_PWM(IO) SET_OUTPUT(IO)
// Check if pin is an input // Check if pin is an input
#define GET_INPUT(IO) ((digitalPinToPort(IO)->PIO_OSR & digitalPinToBitMask(IO)) == 0) #define IS_INPUT(IO) ((digitalPinToPort(IO)->PIO_OSR & digitalPinToBitMask(IO)) == 0)
// Check if pin is an output // Check if pin is an output
#define GET_OUTPUT(IO) ((digitalPinToPort(IO)->PIO_OSR & digitalPinToBitMask(IO)) != 0) #define IS_OUTPUT(IO) ((digitalPinToPort(IO)->PIO_OSR & digitalPinToBitMask(IO)) != 0)
// Check if pin is a timer - Must be a constexpr // Check if pin is a timer - Must be a constexpr
#define GET_TIMER(IO) ((IO) >= 2 && (IO) <= 13) #define HAS_TIMER(IO) ((IO) >= 2 && (IO) <= 13)
// Shorthand // Shorthand
#define OUT_WRITE(IO,V) { SET_OUTPUT(IO); WRITE(IO,V); } #define OUT_WRITE(IO,V) { SET_OUTPUT(IO); WRITE(IO,V); }

16
Marlin/src/HAL/HAL_LINUX/fastio.h
View File

@@ -75,19 +75,19 @@
// hg42: currently not used, but was used by pinsDebug // hg42: currently not used, but was used by pinsDebug
/// check if pin is an input /// check if pin is an input
#define _GET_INPUT(IO) (LPC1768_PIN_PIN(IO) >= 0) #define _IS_INPUT(IO) (LPC1768_PIN_PIN(IO) >= 0)
/// check if pin is an output /// check if pin is an output
#define _GET_OUTPUT(IO) (LPC1768_PIN_PIN(IO) >= 0) #define _IS_OUTPUT(IO) (LPC1768_PIN_PIN(IO) >= 0)
// hg42: GET_TIMER is used only to check if it's a PWM pin // hg42: HAS_TIMER is used only to check if it's a PWM pin
// hg42: we cannot use USEABLE_HARDWARE_PWM because it uses a function that cannot be used statically // hg42: we cannot use USEABLE_HARDWARE_PWM because it uses a function that cannot be used statically
// hg42: instead use PWM bit from the #define // hg42: instead use PWM bit from the #define
/// check if pin is a timer /// check if pin is a timer
#define _GET_TIMER(IO) true // could be LPC1768_PIN_PWM(IO), but there #define _HAS_TIMER(IO) true // could be LPC1768_PIN_PWM(IO), but there
// hg42: could be this: // hg42: could be this:
// #define _GET_TIMER(IO) LPC1768_PIN_PWM(IO) // #define _HAS_TIMER(IO) LPC1768_PIN_PWM(IO)
// but this is an incomplete check (12 pins are PWMable, but only 6 can be used at the same time) // but this is an incomplete check (12 pins are PWMable, but only 6 can be used at the same time)
/// Read a pin wrapper /// Read a pin wrapper
@@ -112,12 +112,12 @@
#define SET_PWM(IO) SET_OUTPUT(IO) #define SET_PWM(IO) SET_OUTPUT(IO)
/// check if pin is an input wrapper /// check if pin is an input wrapper
#define GET_INPUT(IO) _GET_INPUT(IO) #define IS_INPUT(IO) _IS_INPUT(IO)
/// check if pin is an output wrapper /// check if pin is an output wrapper
#define GET_OUTPUT(IO) _GET_OUTPUT(IO) #define IS_OUTPUT(IO) _IS_OUTPUT(IO)
/// check if pin is a timer (wrapper) /// check if pin is a timer (wrapper)
#define GET_TIMER(IO) _GET_TIMER(IO) #define HAS_TIMER(IO) _HAS_TIMER(IO)
// Shorthand // Shorthand
#define OUT_WRITE(IO,V) do{ SET_OUTPUT(IO); WRITE(IO,V); }while(0) #define OUT_WRITE(IO,V) do{ SET_OUTPUT(IO); WRITE(IO,V); }while(0)

12
Marlin/src/HAL/HAL_LPC1768/fastio.h
View File

@@ -84,14 +84,14 @@
#define _PULLDOWN(IO,V) pinMode(IO, (V) ? INPUT_PULLDOWN : INPUT) #define _PULLDOWN(IO,V) pinMode(IO, (V) ? INPUT_PULLDOWN : INPUT)
/// check if pin is an input /// check if pin is an input
#define _GET_INPUT(IO) (!gpio_get_dir(IO)) #define _IS_INPUT(IO) (!gpio_get_dir(IO))
/// check if pin is an output /// check if pin is an output
#define _GET_OUTPUT(IO) (gpio_get_dir(IO)) #define _IS_OUTPUT(IO) (gpio_get_dir(IO))
/// check if pin is a timer /// check if pin is a timer
/// all gpio pins are pwm capable, either interrupt or hardware pwm controlled /// all gpio pins are pwm capable, either interrupt or hardware pwm controlled
#define _GET_TIMER(IO) true #define _HAS_TIMER(IO) true
/// Read a pin wrapper /// Read a pin wrapper
#define READ(IO) _READ(IO) #define READ(IO) _READ(IO)
@@ -115,12 +115,12 @@
#define SET_PWM(IO) SET_OUTPUT(IO) #define SET_PWM(IO) SET_OUTPUT(IO)
/// check if pin is an input wrapper /// check if pin is an input wrapper
#define GET_INPUT(IO) _GET_INPUT(IO) #define IS_INPUT(IO) _IS_INPUT(IO)
/// check if pin is an output wrapper /// check if pin is an output wrapper
#define GET_OUTPUT(IO) _GET_OUTPUT(IO) #define IS_OUTPUT(IO) _IS_OUTPUT(IO)
/// check if pin is a timer (wrapper) /// check if pin is a timer (wrapper)
#define GET_TIMER(IO) _GET_TIMER(IO) #define HAS_TIMER(IO) _HAS_TIMER(IO)
// Shorthand // Shorthand
#define OUT_WRITE(IO,V) do{ SET_OUTPUT(IO); WRITE(IO,V); }while(0) #define OUT_WRITE(IO,V) do{ SET_OUTPUT(IO); WRITE(IO,V); }while(0)

8
Marlin/src/HAL/HAL_STM32/fastio_STM32.h
View File

@@ -78,11 +78,11 @@ void FastIO_init(); // Must be called before using fast io macros
#define SET_OUTPUT(IO) OUT_WRITE(IO, LOW) #define SET_OUTPUT(IO) OUT_WRITE(IO, LOW)
#define SET_PWM(IO) _SET_MODE(IO, PWM) #define SET_PWM(IO) _SET_MODE(IO, PWM)
#define GET_INPUT(IO) #define IS_INPUT(IO)
#define GET_OUTPUT(IO) #define IS_OUTPUT(IO)
#define GET_TIMER(IO) #define HAS_TIMER(IO)
#define PWM_PIN(P) digitalPinHasPWM(P) #define PWM_PIN(P) HAS_TIMER(P)
#define USEABLE_HARDWARE_PWM(P) PWM_PIN(P) #define USEABLE_HARDWARE_PWM(P) PWM_PIN(P)
// digitalRead/Write wrappers // digitalRead/Write wrappers

8
Marlin/src/HAL/HAL_STM32F1/fastio_STM32F1.h
View File

@@ -45,11 +45,11 @@
#define SET_OUTPUT(IO) OUT_WRITE(IO, LOW) #define SET_OUTPUT(IO) OUT_WRITE(IO, LOW)
#define SET_PWM(IO) pinMode(IO, PWM) // do{ gpio_set_mode(PIN_MAP[pin].gpio_device, PIN_MAP[pin].gpio_bit, GPIO_AF_OUTPUT_PP); timer_set_mode(PIN_MAP[pin].timer_device, PIN_MAP[pin].timer_channel, TIMER_PWM); }while(0) #define SET_PWM(IO) pinMode(IO, PWM) // do{ gpio_set_mode(PIN_MAP[pin].gpio_device, PIN_MAP[pin].gpio_bit, GPIO_AF_OUTPUT_PP); timer_set_mode(PIN_MAP[pin].timer_device, PIN_MAP[pin].timer_channel, TIMER_PWM); }while(0)
#define GET_INPUT(IO) (_GET_MODE(IO) == GPIO_INPUT_FLOATING || _GET_MODE(IO) == GPIO_INPUT_ANALOG || _GET_MODE(IO) == GPIO_INPUT_PU || _GET_MODE(IO) == GPIO_INPUT_PD) #define IS_INPUT(IO) (_GET_MODE(IO) == GPIO_INPUT_FLOATING || _GET_MODE(IO) == GPIO_INPUT_ANALOG || _GET_MODE(IO) == GPIO_INPUT_PU || _GET_MODE(IO) == GPIO_INPUT_PD)
#define GET_OUTPUT(IO) (_GET_MODE(IO) == GPIO_OUTPUT_PP) #define IS_OUTPUT(IO) (_GET_MODE(IO) == GPIO_OUTPUT_PP)
#define GET_TIMER(IO) (PIN_MAP[IO].timer_device != NULL) #define HAS_TIMER(IO) (PIN_MAP[IO].timer_device != NULL)
#define PWM_PIN(P) digitalPinHasPWM(P) #define PWM_PIN(P) HAS_TIMER(P)
#define USEABLE_HARDWARE_PWM(P) PWM_PIN(P) #define USEABLE_HARDWARE_PWM(P) PWM_PIN(P)
// digitalRead/Write wrappers // digitalRead/Write wrappers

6
Marlin/src/HAL/HAL_STM32F4/fastio_STM32F4.h
View File

@@ -48,9 +48,9 @@
#define TOGGLE(IO) OUT_WRITE(IO, !READ(IO)) #define TOGGLE(IO) OUT_WRITE(IO, !READ(IO))
#define GET_INPUT(IO) #define IS_INPUT(IO)
#define GET_OUTPUT(IO) #define IS_OUTPUT(IO)
#define GET_TIMER(IO) #define HAS_TIMER(IO)
#define PWM_PIN(P) true #define PWM_PIN(P) true
#define USEABLE_HARDWARE_PWM(P) PWM_PIN(P) #define USEABLE_HARDWARE_PWM(P) PWM_PIN(P)

6
Marlin/src/HAL/HAL_STM32F7/fastio_STM32F7.h
View File

@@ -47,9 +47,9 @@
#define TOGGLE(IO) OUT_WRITE(IO, !READ(IO)) #define TOGGLE(IO) OUT_WRITE(IO, !READ(IO))
#define GET_INPUT(IO) #define IS_INPUT(IO)
#define GET_OUTPUT(IO) #define IS_OUTPUT(IO)
#define GET_TIMER(IO) #define HAS_TIMER(IO)
#define PWM_PIN(P) true #define PWM_PIN(P) true
#define USEABLE_HARDWARE_PWM(P) PWM_PIN(P) #define USEABLE_HARDWARE_PWM(P) PWM_PIN(P)

8
Marlin/src/HAL/HAL_TEENSY31_32/fastio_Teensy.h
View File

@@ -67,8 +67,8 @@
GPIO_BITBAND(CORE_PIN ## P ## _DDRREG , CORE_PIN ## P ## _BIT) = 0; \ GPIO_BITBAND(CORE_PIN ## P ## _DDRREG , CORE_PIN ## P ## _BIT) = 0; \
}while(0) }while(0)
#define _GET_INPUT(P) ((CORE_PIN ## P ## _DDRREG & CORE_PIN ## P ## _BITMASK) == 0) #define _IS_INPUT(P) ((CORE_PIN ## P ## _DDRREG & CORE_PIN ## P ## _BITMASK) == 0)
#define _GET_OUTPUT(P) ((CORE_PIN ## P ## _DDRREG & CORE_PIN ## P ## _BITMASK) == 0) #define _IS_OUTPUT(P) ((CORE_PIN ## P ## _DDRREG & CORE_PIN ## P ## _BITMASK) == 0)
#define READ(IO) _READ(IO) #define READ(IO) _READ(IO)
@@ -81,8 +81,8 @@
#define SET_OUTPUT(IO) _SET_OUTPUT(IO) #define SET_OUTPUT(IO) _SET_OUTPUT(IO)
#define SET_PWM(IO) SET_OUTPUT(IO) #define SET_PWM(IO) SET_OUTPUT(IO)
#define GET_INPUT(IO) _GET_INPUT(IO) #define IS_INPUT(IO) _IS_INPUT(IO)
#define GET_OUTPUT(IO) _GET_OUTPUT(IO) #define IS_OUTPUT(IO) _IS_OUTPUT(IO)
#define OUT_WRITE(IO,V) do{ SET_OUTPUT(IO); WRITE(IO,V); }while(0) #define OUT_WRITE(IO,V) do{ SET_OUTPUT(IO); WRITE(IO,V); }while(0)

8
Marlin/src/HAL/HAL_TEENSY35_36/fastio_Teensy.h
View File

@@ -66,8 +66,8 @@
GPIO_BITBAND(CORE_PIN ## P ## _DDRREG , CORE_PIN ## P ## _BIT) = 0; \ GPIO_BITBAND(CORE_PIN ## P ## _DDRREG , CORE_PIN ## P ## _BIT) = 0; \
}while(0) }while(0)
#define _GET_INPUT(P) ((CORE_PIN ## P ## _DDRREG & CORE_PIN ## P ## _BITMASK) == 0) #define _IS_INPUT(P) ((CORE_PIN ## P ## _DDRREG & CORE_PIN ## P ## _BITMASK) == 0)
#define _GET_OUTPUT(P) ((CORE_PIN ## P ## _DDRREG & CORE_PIN ## P ## _BITMASK) == 0) #define _IS_OUTPUT(P) ((CORE_PIN ## P ## _DDRREG & CORE_PIN ## P ## _BITMASK) == 0)
#define READ(IO) _READ(IO) #define READ(IO) _READ(IO)
@@ -80,8 +80,8 @@
#define SET_OUTPUT(IO) _SET_OUTPUT(IO) #define SET_OUTPUT(IO) _SET_OUTPUT(IO)
#define SET_PWM(IO) SET_OUTPUT(IO) #define SET_PWM(IO) SET_OUTPUT(IO)
#define GET_INPUT(IO) _GET_INPUT(IO) #define IS_INPUT(IO) _IS_INPUT(IO)
#define GET_OUTPUT(IO) _GET_OUTPUT(IO) #define IS_OUTPUT(IO) _IS_OUTPUT(IO)
#define OUT_WRITE(IO,V) do{ SET_OUTPUT(IO); WRITE(IO,V); }while(0) #define OUT_WRITE(IO,V) do{ SET_OUTPUT(IO); WRITE(IO,V); }while(0)

8
Marlin/src/pins/pinsDebug.h
View File

@@ -139,11 +139,11 @@ inline void report_pin_state_extended(pin_t pin, bool ignore, bool extended = fa
#if AVR_AT90USB1286_FAMILY //Teensy IDEs don't know about these pins so must use FASTIO #if AVR_AT90USB1286_FAMILY //Teensy IDEs don't know about these pins so must use FASTIO
if (pin == 46 || pin == 47) { if (pin == 46 || pin == 47) {
if (pin == 46) { if (pin == 46) {
print_input_or_output(GET_OUTPUT(46)); print_input_or_output(IS_OUTPUT(46));
SERIAL_CHAR('0' + READ(46)); SERIAL_CHAR('0' + READ(46));
} }
else if (pin == 47) { else if (pin == 47) {
print_input_or_output(GET_OUTPUT(47)); print_input_or_output(IS_OUTPUT(47));
SERIAL_CHAR('0' + READ(47)); SERIAL_CHAR('0' + READ(47));
} }
} }
@@ -195,11 +195,11 @@ inline void report_pin_state_extended(pin_t pin, bool ignore, bool extended = fa
if (pin == 46 || pin == 47) { if (pin == 46 || pin == 47) {
SERIAL_ECHO_SP(12); SERIAL_ECHO_SP(12);
if (pin == 46) { if (pin == 46) {
print_input_or_output(GET_OUTPUT(46)); print_input_or_output(IS_OUTPUT(46));
SERIAL_CHAR('0' + READ(46)); SERIAL_CHAR('0' + READ(46));
} }
else { else {
print_input_or_output(GET_OUTPUT(47)); print_input_or_output(IS_OUTPUT(47));
SERIAL_CHAR('0' + READ(47)); SERIAL_CHAR('0' + READ(47));
} }
} }