Bring chamber temp to completion (#13837)

Marlin/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

Marlin/src/feature/power.cpp

@@ -50,6 +50,10 @@ bool Power::is_power_needed() {
     if (controllerfan_speed) return true;
   #endif
 
+  #if ENABLED(AUTO_POWER_CHAMBER_FAN)
+    if (thermalManager.chamberfan_speed) return true;
+  #endif
+
   // If any of the drivers or the bed are enabled...
   if (X_ENABLE_READ == X_ENABLE_ON || Y_ENABLE_READ == Y_ENABLE_ON || Z_ENABLE_READ == Z_ENABLE_ON
     #if HAS_HEATED_BED

Marlin/src/gcode/temperature/M141_M191.cpp

@@ -60,7 +60,7 @@ void GcodeSuite::M191() {
 
   const bool no_wait_for_cooling = parser.seenval('S');
   if (no_wait_for_cooling || parser.seenval('R')) {
-    thermalManager.setTargetBed(parser.value_celsius());
+    thermalManager.setTargetChamber(parser.value_celsius());
     #if ENABLED(PRINTJOB_TIMER_AUTOSTART)
       if (parser.value_celsius() > BED_MINTEMP)
         print_job_timer.start();
@@ -68,9 +68,9 @@ void GcodeSuite::M191() {
   }
   else return;
 
-  lcd_setstatusPGM(thermalManager.isHeatingBed() ? PSTR(MSG_BED_HEATING) : PSTR(MSG_BED_COOLING));
+  lcd_setstatusPGM(thermalManager.isHeatingChamber() ? PSTR(MSG_CHAMBER_HEATING) : PSTR(MSG_CHAMBER_COOLING));
 
-  thermalManager.wait_for_bed(no_wait_for_cooling);
+  thermalManager.wait_for_chamber(no_wait_for_cooling);
 }
 */
 

Marlin/src/inc/Conditionals_post.h

@@ -953,7 +953,7 @@
 #define HAS_AUTO_FAN_3 (HOTENDS > 3 && PIN_EXISTS(E3_AUTO_FAN))
 #define HAS_AUTO_FAN_4 (HOTENDS > 4 && PIN_EXISTS(E4_AUTO_FAN))
 #define HAS_AUTO_FAN_5 (HOTENDS > 5 && PIN_EXISTS(E5_AUTO_FAN))
-#define HAS_AUTO_CHAMBER_FAN (PIN_EXISTS(CHAMBER_AUTO_FAN))
+#define HAS_AUTO_CHAMBER_FAN (HAS_TEMP_CHAMBER && PIN_EXISTS(CHAMBER_AUTO_FAN))
 #define HAS_AUTO_FAN (HAS_AUTO_FAN_0 || HAS_AUTO_FAN_1 || HAS_AUTO_FAN_2 || HAS_AUTO_FAN_3 || HAS_AUTO_FAN_4 || HAS_AUTO_FAN_5 || HAS_AUTO_CHAMBER_FAN)
 
 // Other fans

Marlin/src/lcd/language/language_en.h

@@ -1014,6 +1014,12 @@
 #ifndef MSG_BED_COOLING
   #define MSG_BED_COOLING                     _UxGT("Bed cooling...")
 #endif
+#ifndef MSG_CHAMBER_HEATING
+  #define MSG_CHAMBER_HEATING                 _UxGT("Chamber heating...")
+#endif
+#ifndef MSG_CHAMBER_COOLING
+  #define MSG_CHAMBER_COOLING                 _UxGT("Chamber cooling...")
+#endif
 #ifndef MSG_DELTA_CALIBRATE
   #define MSG_DELTA_CALIBRATE                 _UxGT("Delta Calibration")
 #endif

Marlin/src/lcd/language/language_it.h

@@ -356,6 +356,8 @@
 #define MSG_COOLING                         _UxGT("Raffreddamento..")
 #define MSG_BED_HEATING                     _UxGT("Risc. piatto...")
 #define MSG_BED_COOLING                     _UxGT("Raffr. piatto...")
+#define MSG_CHAMBER_HEATING                 _UxGT("Risc. camera...")
+#define MSG_CHAMBER_COOLING                 _UxGT("Raffr. camera...")
 #define MSG_DELTA_CALIBRATE                 _UxGT("Calibraz. Delta")
 #define MSG_DELTA_CALIBRATE_X               _UxGT("Calibra X")
 #define MSG_DELTA_CALIBRATE_Y               _UxGT("Calibra Y")

Marlin/src/module/temperature.cpp

@@ -110,6 +110,10 @@ hotend_info_t Temperature::temp_hotend[HOTENDS]; // = { 0 }
   uint8_t Temperature::autofan_speed[HOTENDS]; // = { 0 }
 #endif
 
+#if ENABLED(AUTO_POWER_CHAMBER_FAN)
+  uint8_t Temperature::chamberfan_speed; // = 0
+#endif
+
 #if FAN_COUNT > 0
 
   uint8_t Temperature::fan_speed[FAN_COUNT]; // = { 0 }
@@ -640,16 +644,28 @@ int16_t Temperature::getHeaterPower(const int8_t heater) {
   #define AUTO_CHAMBER_IS_3 (CHAMBER_AUTO_FAN_PIN == E3_AUTO_FAN_PIN)
   #define AUTO_CHAMBER_IS_4 (CHAMBER_AUTO_FAN_PIN == E4_AUTO_FAN_PIN)
   #define AUTO_CHAMBER_IS_5 (CHAMBER_AUTO_FAN_PIN == E5_AUTO_FAN_PIN)
+  #define AUTO_CHAMBER_IS_E (AUTO_CHAMBER_IS_0 || AUTO_CHAMBER_IS_1 || AUTO_CHAMBER_IS_2 || AUTO_CHAMBER_IS_3 || AUTO_CHAMBER_IS_4 || AUTO_CHAMBER_IS_5)
+  #define CHAMBER_FAN_INDEX HOTENDS
 
   void Temperature::checkExtruderAutoFans() {
     static const uint8_t fanBit[] PROGMEM = {
-                    0,
+      0
-      AUTO_1_IS_0 ? 0 :               1,
+      #if HOTENDS > 1
-      AUTO_2_IS_0 ? 0 : AUTO_2_IS_1 ? 1 :               2,
+        , AUTO_1_IS_0 ? 0 : 1
-      AUTO_3_IS_0 ? 0 : AUTO_3_IS_1 ? 1 : AUTO_3_IS_2 ? 2 :               3,
+      #endif
-      AUTO_4_IS_0 ? 0 : AUTO_4_IS_1 ? 1 : AUTO_4_IS_2 ? 2 : AUTO_4_IS_3 ? 3 :               4,
+      #if HOTENDS > 2
-      AUTO_5_IS_0 ? 0 : AUTO_5_IS_1 ? 1 : AUTO_5_IS_2 ? 2 : AUTO_5_IS_3 ? 3 : AUTO_5_IS_4 ? 4 : 5
+        , AUTO_2_IS_0 ? 0 : AUTO_2_IS_1 ? 1 : 2
-      #if HAS_TEMP_CHAMBER
+      #endif
+      #if HOTENDS > 3
+        , AUTO_3_IS_0 ? 0 : AUTO_3_IS_1 ? 1 : AUTO_3_IS_2 ? 2 : 3,
+      #endif
+      #if HOTENDS > 4
+        , AUTO_4_IS_0 ? 0 : AUTO_4_IS_1 ? 1 : AUTO_4_IS_2 ? 2 : AUTO_4_IS_3 ? 3 : 4,
+      #endif
+      #if HOTENDS > 5
+        , AUTO_5_IS_0 ? 0 : AUTO_5_IS_1 ? 1 : AUTO_5_IS_2 ? 2 : AUTO_5_IS_3 ? 3 : AUTO_5_IS_4 ? 4 : 5
+      #endif
+      #if HAS_AUTO_CHAMBER_FAN
         , AUTO_CHAMBER_IS_0 ? 0 : AUTO_CHAMBER_IS_1 ? 1 : AUTO_CHAMBER_IS_2 ? 2 : AUTO_CHAMBER_IS_3 ? 3 : AUTO_CHAMBER_IS_4 ? 4 : AUTO_CHAMBER_IS_5 ? 5 : 6
       #endif
     };
@@ -659,52 +675,60 @@ int16_t Temperature::getHeaterPower(const int8_t heater) {
       if (temp_hotend[e].current > EXTRUDER_AUTO_FAN_TEMPERATURE)
         SBI(fanState, pgm_read_byte(&fanBit[e]));
 
-    #if HAS_TEMP_CHAMBER
+    #if HAS_AUTO_CHAMBER_FAN
-      if (temp_chamber.current > EXTRUDER_AUTO_FAN_TEMPERATURE)
+      if (temp_chamber.current > CHAMBER_AUTO_FAN_TEMPERATURE)
-        SBI(fanState, pgm_read_byte(&fanBit[6]));
+        SBI(fanState, pgm_read_byte(&fanBit[CHAMBER_FAN_INDEX]));
     #endif
 
     #define _UPDATE_AUTO_FAN(P,D,A) do{             \
-      if (PWM_PIN(P##_AUTO_FAN_PIN) && EXTRUDER_AUTO_FAN_SPEED < 255) \
+      if (PWM_PIN(P##_AUTO_FAN_PIN) && A < 255)     \
-        analogWrite(P##_AUTO_FAN_PIN, A);                             \
+        analogWrite(P##_AUTO_FAN_PIN, D ? A : 0);   \
       else                                          \
         WRITE(P##_AUTO_FAN_PIN, D);                 \
     }while(0)
 
     uint8_t fanDone = 0;
     for (uint8_t f = 0; f < COUNT(fanBit); f++) {
-      const uint8_t bit = pgm_read_byte(&fanBit[f]);
+      const uint8_t realFan = pgm_read_byte(&fanBit[f]);
-      if (TEST(fanDone, bit)) continue;
+      if (TEST(fanDone, realFan)) continue;
-      const bool fan_on = TEST(fanState, bit);
+      const bool fan_on = TEST(fanState, realFan);
-      const uint8_t speed = fan_on ? EXTRUDER_AUTO_FAN_SPEED : 0;
+      switch (f) {
-      #if ENABLED(AUTO_POWER_E_FANS)
+        #if HAS_AUTO_CHAMBER_FAN && !AUTO_CHAMBER_IS_E
-        autofan_speed[f] = speed;
+          case CHAMBER_FAN_INDEX:
+            chamberfan_speed = fan_on ? CHAMBER_AUTO_FAN_SPEED : 0;
+            break;
         #endif
+        default:
+          #if ENABLED(AUTO_POWER_E_FANS)
+            autofan_speed[realFan] = fan_on ? EXTRUDER_AUTO_FAN_SPEED : 0;
+          #endif
+          break;
+      }
+
       switch (f) {
         #if HAS_AUTO_FAN_0
-          case 0: _UPDATE_AUTO_FAN(E0, fan_on, speed); break;
+          case 0: _UPDATE_AUTO_FAN(E0, fan_on, EXTRUDER_AUTO_FAN_SPEED); break;
         #endif
         #if HAS_AUTO_FAN_1
-          case 1: _UPDATE_AUTO_FAN(E1, fan_on, speed); break;
+          case 1: _UPDATE_AUTO_FAN(E1, fan_on, EXTRUDER_AUTO_FAN_SPEED); break;
         #endif
         #if HAS_AUTO_FAN_2
-          case 2: _UPDATE_AUTO_FAN(E2, fan_on, speed); break;
+          case 2: _UPDATE_AUTO_FAN(E2, fan_on, EXTRUDER_AUTO_FAN_SPEED); break;
         #endif
         #if HAS_AUTO_FAN_3
-          case 3: _UPDATE_AUTO_FAN(E3, fan_on, speed); break;
+          case 3: _UPDATE_AUTO_FAN(E3, fan_on, EXTRUDER_AUTO_FAN_SPEED); break;
         #endif
         #if HAS_AUTO_FAN_4
-          case 4: _UPDATE_AUTO_FAN(E4, fan_on, speed); break;
+          case 4: _UPDATE_AUTO_FAN(E4, fan_on, EXTRUDER_AUTO_FAN_SPEED); break;
         #endif
         #if HAS_AUTO_FAN_5
-          case 5: _UPDATE_AUTO_FAN(E5, fan_on, speed); break;
+          case 5: _UPDATE_AUTO_FAN(E5, fan_on, EXTRUDER_AUTO_FAN_SPEED); break;
         #endif
-        #if HAS_AUTO_CHAMBER_FAN
+        #if HAS_AUTO_CHAMBER_FAN && !AUTO_CHAMBER_IS_E
-          case 6: _UPDATE_AUTO_FAN(CHAMBER, fan_on, speed); break;
+          case CHAMBER_FAN_INDEX: _UPDATE_AUTO_FAN(CHAMBER, fan_on, CHAMBER_AUTO_FAN_SPEED); break;
         #endif
       }
-      SBI(fanDone, bit);
+      SBI(fanDone, realFan);
-      UNUSED(fan_on); UNUSED(speed);
     }
   }
 
@@ -1086,14 +1110,12 @@ void Temperature::manage_heater() {
     }
   #endif // HAS_HEATED_BED
 
-  #if HAS_TEMP_CHAMBER
+  #if HAS_HEATED_CHAMBER
 
     #ifndef CHAMBER_CHECK_INTERVAL
       #define CHAMBER_CHECK_INTERVAL 1000UL
     #endif
 
-    #if HAS_HEATED_CHAMBER
-
     #if ENABLED(THERMAL_PROTECTION_CHAMBER)
       if (!grace_period && degChamber() > CHAMBER_MAXTEMP)
         _temp_error(-2, PSTR(MSG_T_THERMAL_RUNAWAY), TEMP_ERR_PSTR(MSG_THERMAL_RUNAWAY, -2));
@@ -1135,8 +1157,6 @@ void Temperature::manage_heater() {
     //temp_bed.soft_pwm_amount = WITHIN(temp_chamber.current, CHAMBER_MINTEMP, CHAMBER_MAXTEMP) ? (int)get_pid_output_chamber() >> 1 : 0;
 
   #endif // HAS_HEATED_CHAMBER
-
-  #endif // HAS_TEMP_CHAMBER
 }
 
 #define TEMP_AD595(RAW)  ((RAW) * 5.0 * 100.0 / 1024.0 / (OVERSAMPLENR) * (TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET)
@@ -1353,10 +1373,16 @@ void Temperature::updateTemperaturesFromRawValues() {
 #endif
 #define INIT_FAN_PIN(P) do{ _INIT_FAN_PIN(P); SET_FAST_PWM_FREQ(P); }while(0)
 #if EXTRUDER_AUTO_FAN_SPEED != 255
-  #define INIT_AUTO_FAN_PIN(P) do{ if (P == FAN1_PIN || P == FAN2_PIN) { SET_PWM(P); SET_FAST_PWM_FREQ(FAST_PWM_FAN_FREQUENCY); } else SET_OUTPUT(P); }while(0)
+  #define INIT_E_AUTO_FAN_PIN(P) do{ if (P == FAN1_PIN || P == FAN2_PIN) { SET_PWM(P); SET_FAST_PWM_FREQ(FAST_PWM_FAN_FREQUENCY); } else SET_OUTPUT(P); }while(0)
 #else
-  #define INIT_AUTO_FAN_PIN(P) SET_OUTPUT(P)
+  #define INIT_E_AUTO_FAN_PIN(P) SET_OUTPUT(P)
 #endif
+#if CHAMBER_AUTO_FAN_SPEED != 255
+  #define INIT_CHAMBER_AUTO_FAN_PIN(P) do{ if (P == FAN1_PIN || P == FAN2_PIN) { SET_PWM(P); SET_FAST_PWM_FREQ(FAST_PWM_FAN_FREQUENCY); } else SET_OUTPUT(P); }while(0)
+#else
+  #define INIT_CHAMBER_AUTO_FAN_PIN(P) SET_OUTPUT(P)
+#endif
+
 
 /**
  * Initialize the temperature manager
@@ -1472,25 +1498,25 @@ void Temperature::init() {
   ENABLE_TEMPERATURE_INTERRUPT();
 
   #if HAS_AUTO_FAN_0
-    INIT_AUTO_FAN_PIN(E0_AUTO_FAN_PIN);
+    INIT_E_AUTO_FAN_PIN(E0_AUTO_FAN_PIN);
   #endif
   #if HAS_AUTO_FAN_1 && !AUTO_1_IS_0
-    INIT_AUTO_FAN_PIN(E1_AUTO_FAN_PIN);
+    INIT_E_AUTO_FAN_PIN(E1_AUTO_FAN_PIN);
   #endif
   #if HAS_AUTO_FAN_2 && !(AUTO_2_IS_0 || AUTO_2_IS_1)
-    INIT_AUTO_FAN_PIN(E2_AUTO_FAN_PIN);
+    INIT_E_AUTO_FAN_PIN(E2_AUTO_FAN_PIN);
   #endif
   #if HAS_AUTO_FAN_3 && !(AUTO_3_IS_0 || AUTO_3_IS_1 || AUTO_3_IS_2)
-    INIT_AUTO_FAN_PIN(E3_AUTO_FAN_PIN);
+    INIT_E_AUTO_FAN_PIN(E3_AUTO_FAN_PIN);
   #endif
   #if HAS_AUTO_FAN_4 && !(AUTO_4_IS_0 || AUTO_4_IS_1 || AUTO_4_IS_2 || AUTO_4_IS_3)
-    INIT_AUTO_FAN_PIN(E4_AUTO_FAN_PIN);
+    INIT_E_AUTO_FAN_PIN(E4_AUTO_FAN_PIN);
   #endif
   #if HAS_AUTO_FAN_5 && !(AUTO_5_IS_0 || AUTO_5_IS_1 || AUTO_5_IS_2 || AUTO_5_IS_3 || AUTO_5_IS_4)
-    INIT_AUTO_FAN_PIN(E5_AUTO_FAN_PIN);
+    INIT_E_AUTO_FAN_PIN(E5_AUTO_FAN_PIN);
   #endif
-  #if HAS_AUTO_CHAMBER_FAN && !(AUTO_CHAMBER_IS_0 || AUTO_CHAMBER_IS_1 || AUTO_CHAMBER_IS_2 || AUTO_CHAMBER_IS_3 || AUTO_CHAMBER_IS_4 || AUTO_CHAMBER_IS_5)
+  #if HAS_AUTO_CHAMBER_FAN && !AUTO_CHAMBER_IS_E
-    INIT_AUTO_FAN_PIN(CHAMBER_AUTO_FAN_PIN);
+    INIT_CHAMBER_AUTO_FAN_PIN(CHAMBER_AUTO_FAN_PIN);
   #endif
 
   // Wait for temperature measurement to settle
@@ -2615,22 +2641,18 @@ void Temperature::isr() {
       );
     #endif
     #if HAS_TEMP_CHAMBER
+      print_heater_state(degChamber()
         #if HAS_HEATED_CHAMBER
-        print_heater_state(degChamber(), degTargetChamber()
+          , degTargetChamber()
-          #if ENABLED(SHOW_TEMP_ADC_VALUES)
-            , rawChamberTemp()
-          #endif
-        , -2 // CHAMBER
-      );
         #else
-        print_heater_state(degChamber(), 0
+          , 0
+        #endif
         #if ENABLED(SHOW_TEMP_ADC_VALUES)
           , rawChamberTemp()
         #endif
         , -2 // CHAMBER
       );
-      #endif // HAS_HEATED_CHAMBER
+    #endif // HAS_TEMP_CHAMBER
-    #endif
     #if HOTENDS > 1
       HOTEND_LOOP() print_heater_state(degHotend(e), degTargetHotend(e)
         #if ENABLED(SHOW_TEMP_ADC_VALUES)
@@ -2935,4 +2957,106 @@ void Temperature::isr() {
 
   #endif // HAS_HEATED_BED
 
+  #if 0 && HAS_HEATED_CHAMBER
+
+    #ifndef MIN_COOLING_SLOPE_DEG_CHAMBER
+      #define MIN_COOLING_SLOPE_DEG_CHAMBER 1.50
+    #endif
+    #ifndef MIN_COOLING_SLOPE_TIME_CHAMBER
+      #define MIN_COOLING_SLOPE_TIME_CHAMBER 60
+    #endif
+
+    bool Temperature::wait_for_chamber(const bool no_wait_for_cooling/*=true*/) {
+      #if TEMP_CHAMBER_RESIDENCY_TIME > 0
+        millis_t residency_start_ms = 0;
+        // Loop until the temperature has stabilized
+        #define TEMP_CHAMBER_CONDITIONS (!residency_start_ms || PENDING(now, residency_start_ms + (TEMP_CHAMBER_RESIDENCY_TIME) * 1000UL))
+      #else
+        // Loop until the temperature is very close target
+        #define TEMP_CHAMBER_CONDITIONS (wants_to_cool ? isCoolingChamber() : isHeatingChamber())
+      #endif
+
+      float target_temp = -1, old_temp = 9999;
+      bool wants_to_cool = false, first_loop = true;
+      wait_for_heatup = true;
+      millis_t now, next_temp_ms = 0, next_cool_check_ms = 0;
+
+      #if DISABLED(BUSY_WHILE_HEATING) && ENABLED(HOST_KEEPALIVE_FEATURE)
+        const GcodeSuite::MarlinBusyState old_busy_state = gcode.busy_state;
+        KEEPALIVE_STATE(NOT_BUSY);
+      #endif
+
+      do {
+        // Target temperature might be changed during the loop
+        if (target_temp != degTargetChamber()) {
+          wants_to_cool = isCoolingChamber();
+          target_temp = degTargetChamber();
+
+          // Exit if S<lower>, continue if S<higher>, R<lower>, or R<higher>
+          if (no_wait_for_cooling && wants_to_cool) break;
+        }
+
+        now = millis();
+        if (ELAPSED(now, next_temp_ms)) { //Print Temp Reading every 1 second while heating up.
+          next_temp_ms = now + 1000UL;
+          print_heater_states(active_extruder);
+          #if TEMP_CHAMBER_RESIDENCY_TIME > 0
+            SERIAL_ECHOPGM(" W:");
+            if (residency_start_ms)
+              SERIAL_ECHO(long((((TEMP_CHAMBER_RESIDENCY_TIME) * 1000UL) - (now - residency_start_ms)) / 1000UL));
+            else
+              SERIAL_CHAR('?');
+          #endif
+          SERIAL_EOL();
+        }
+
+        idle();
+        gcode.reset_stepper_timeout(); // Keep steppers powered
+
+        const float temp = degChamber();
+
+        #if TEMP_CHAMBER_RESIDENCY_TIME > 0
+
+          const float temp_diff = ABS(target_temp - temp);
+
+          if (!residency_start_ms) {
+            // Start the TEMP_CHAMBER_RESIDENCY_TIME timer when we reach target temp for the first time.
+            if (temp_diff < TEMP_CHAMBER_WINDOW) {
+              residency_start_ms = now;
+              if (first_loop) residency_start_ms += (TEMP_CHAMBER_RESIDENCY_TIME) * 1000UL;
+            }
+          }
+          else if (temp_diff > TEMP_CHAMBER_HYSTERESIS) {
+            // Restart the timer whenever the temperature falls outside the hysteresis.
+            residency_start_ms = now;
+          }
+
+        #endif // TEMP_CHAMBER_RESIDENCY_TIME > 0
+
+        // Prevent a wait-forever situation if R is misused i.e. M191 R0
+        if (wants_to_cool) {
+          // Break after MIN_COOLING_SLOPE_TIME_CHAMBER seconds
+          // if the temperature did not drop at least MIN_COOLING_SLOPE_DEG_CHAMBER
+          if (!next_cool_check_ms || ELAPSED(now, next_cool_check_ms)) {
+            if (old_temp - temp < float(MIN_COOLING_SLOPE_DEG_CHAMBER)) break;
+            next_cool_check_ms = now + 1000UL * MIN_COOLING_SLOPE_TIME_CHAMBER;
+            old_temp = temp;
+          }
+        }
+
+        first_loop = false;
+
+      } while (wait_for_heatup && TEMP_CHAMBER_CONDITIONS);
+
+      if (wait_for_heatup) ui.reset_status();
+
+      #if DISABLED(BUSY_WHILE_HEATING) && ENABLED(HOST_KEEPALIVE_FEATURE)
+        gcode.busy_state = old_busy_state;
+      #endif
+
+      return wait_for_heatup;
+    }
+
+  #endif // HAS_HEATED_CHAMBER
+
 #endif // HAS_TEMP_SENSOR

Marlin/src/module/temperature.h

@@ -147,34 +147,6 @@ enum ADCSensorState : char {
 
 #define G26_CLICK_CAN_CANCEL (HAS_LCD_MENU && ENABLED(G26_MESH_VALIDATION))
 
-enum TempIndex : uint8_t {
-  #if HOTENDS > 0
-    TEMP_E0,
-    #if HOTENDS > 1
-      TEMP_E1,
-      #if HOTENDS > 2
-        TEMP_E2,
-        #if HOTENDS > 3
-          TEMP_E3,
-          #if HOTENDS > 4
-            TEMP_E4,
-            #if HOTENDS > 5
-              TEMP_E5,
-            #endif
-          #endif
-        #endif
-      #endif
-    #endif
-  #endif
-  #if HAS_HEATED_BED
-    TEMP_BED,
-  #endif
-  #if HAS_HEATED_CHAMBER
-    TEMP_CHAMBER,
-  #endif
-  tempCOUNT
-};
-
 // A temperature sensor
 typedef struct TempInfo {
   uint16_t acc;
@@ -255,6 +227,10 @@ class Temperature {
       static uint8_t autofan_speed[HOTENDS];
     #endif
 
+    #if ENABLED(AUTO_POWER_CHAMBER_FAN)
+      static uint8_t chamberfan_speed;
+    #endif
+
     #if ENABLED(FAN_SOFT_PWM)
       static uint8_t soft_pwm_amount_fan[FAN_COUNT],
                      soft_pwm_count_fan[FAN_COUNT];
@@ -554,9 +530,8 @@ class Temperature {
       static inline void start_watching_chamber() {}
     #endif
 
-    #if HAS_TEMP_CHAMBER
-      static void setTargetChamber(const int16_t celsius) {
     #if HAS_HEATED_CHAMBER
+      static void setTargetChamber(const int16_t celsius) {
         temp_chamber.target =
           #ifdef CHAMBER_MAXTEMP
             MIN(celsius, CHAMBER_MAXTEMP)
@@ -565,9 +540,8 @@ class Temperature {
           #endif
         ;
         start_watching_chamber();
-        #endif // HAS_HEATED_CHAMBER
       }
-    #endif // HAS_TEMP_CHAMBER
+    #endif // HAS_HEATED_CHAMBER
 
     FORCE_INLINE static bool isHeatingHotend(const uint8_t e) {
       E_UNUSED();
@@ -631,9 +605,11 @@ class Temperature {
       #endif
       FORCE_INLINE static float degChamber()            { return temp_chamber.current; }
       #if HAS_HEATED_CHAMBER
+        FORCE_INLINE static int16_t degTargetChamber()  { return temp_chamber.target; }
         FORCE_INLINE static bool isHeatingChamber()     { return temp_chamber.target > temp_chamber.current; }
         FORCE_INLINE static bool isCoolingChamber()     { return temp_chamber.target < temp_chamber.current; }
-        FORCE_INLINE static int16_t degTargetChamber() {return temp_chamber.target; }
+
+        static bool wait_for_chamber(const bool no_wait_for_cooling=true);
       #endif
     #endif // HAS_TEMP_CHAMBER
 
@@ -754,9 +730,6 @@ class Temperature {
     static void _temp_error(const int8_t e, PGM_P const serial_msg, PGM_P const lcd_msg);
     static void min_temp_error(const int8_t e);
     static void max_temp_error(const int8_t e);
-    #if HAS_TEMP_CHAMBER
-      static void chamber_temp_error(const bool max);
-    #endif
 
     #if ENABLED(THERMAL_PROTECTION_HOTENDS) || HAS_THERMALLY_PROTECTED_BED || ENABLED(THERMAL_PROTECTION_CHAMBER)
 

config/default/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/3DFabXYZ/Migbot/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/AlephObjects/TAZ4/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/AliExpress/CL-260/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/AliExpress/UM2pExt/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Anet/A2/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Anet/A2plus/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Anet/A6/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Anet/A8/Configuration.h

@@ -322,6 +322,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/AnyCubic/i3/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/ArmEd/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Azteeg/X5GT/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/BIBO/TouchX/cyclops/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/BIBO/TouchX/default/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/BQ/Hephestos/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/BQ/Hephestos_2/Configuration.h

@@ -329,6 +329,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/BQ/WITBOX/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Cartesio/Configuration.h

@@ -322,6 +322,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Creality/CR-10/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Creality/CR-10S/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Creality/CR-10_5S/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Creality/CR-10mini/Configuration.h

@@ -330,6 +330,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Creality/CR-8/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Creality/Ender-2/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Creality/Ender-3/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Creality/Ender-4/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Einstart-S/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Felix/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Felix/DUAL/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/FlashForge/CreatorPro/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/FolgerTech/i3-2020/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Formbot/Raptor/Configuration.h

@@ -362,6 +362,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Formbot/T_Rex_2+/Configuration.h

@@ -330,6 +330,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Formbot/T_Rex_3/Configuration.h

@@ -325,6 +325,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Geeetech/A10M/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Geeetech/A20M/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Geeetech/GT2560/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Geeetech/MeCreator2/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Geeetech/Prusa i3 Pro C/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Geeetech/Prusa i3 Pro W/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Infitary/i3-M508/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/JGAurora/A5/Configuration.h

@@ -326,6 +326,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/MakerParts/Configuration.h

@@ -341,6 +341,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Malyan/M150/Configuration.h

@@ -326,6 +326,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Malyan/M200/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Micromake/C1/basic/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Micromake/C1/enhanced/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Mks/Robin/Configuration.h

@@ -322,6 +322,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Mks/Sbase/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Printrbot/PrintrboardG2/Configuration.h

@@ -322,6 +322,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/RapideLite/RL200/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/RepRapPro/Huxley/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/RepRapWorld/Megatronics/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/RigidBot/Configuration.h

@@ -324,6 +324,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/SCARA/Configuration.h

@@ -352,6 +352,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/STM32/Black_STM32F407VET6/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/STM32/STM32F10/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/STM32/STM32F4/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/STM32/stm32f103ret6/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Sanguinololu/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/TheBorg/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/TinyBoy2/Configuration.h

@@ -343,6 +343,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Tronxy/X1/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Tronxy/X3A/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Tronxy/X5S-2E/Configuration.h

@@ -323,6 +323,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Tronxy/X5S/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Tronxy/XY100/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/UltiMachine/Archim1/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/UltiMachine/Archim2/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/VORONDesign/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Velleman/K8200/Configuration.h

@@ -341,6 +341,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Velleman/K8400/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Velleman/K8400/Dual-head/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/WASP/PowerWASP/Configuration.h

@@ -340,6 +340,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/Wanhao/Duplicator 6/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/adafruit/ST7565/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/delta/Anycubic/Kossel/Configuration.h

@@ -336,6 +336,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/delta/FLSUN/auto_calibrate/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/delta/FLSUN/kossel/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/delta/FLSUN/kossel_mini/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/delta/Geeetech/Rostock 301/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/delta/Hatchbox_Alpha/Configuration.h

@@ -326,6 +326,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/delta/MKS/SBASE/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/delta/Tevo Little Monster/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/delta/generic/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/delta/kossel_mini/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/delta/kossel_pro/Configuration.h

@@ -325,6 +325,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/delta/kossel_xl/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/gCreate/gMax1.5+/Configuration.h

@@ -326,6 +326,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif
 

config/examples/makibox/Configuration.h

@@ -321,6 +321,7 @@
     #define AUTO_POWER_FANS           // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
+    #define AUTO_POWER_CHAMBER_FAN
     #define POWER_TIMEOUT 30
   #endif