From e12c8e5cac9a5e7aaa42aa9069023d4b9bc4f32d Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 19 Dec 2016 14:27:39 -0800 Subject: [PATCH] Split up thermistor tables --- Marlin/thermistortable_1.h | 89 +++ Marlin/thermistortable_10.h | 56 ++ Marlin/thermistortable_1010.h | 38 + Marlin/thermistortable_1047.h | 33 + Marlin/thermistortable_11.h | 75 ++ Marlin/thermistortable_110.h | 33 + Marlin/thermistortable_12.h | 55 ++ Marlin/thermistortable_13.h | 48 ++ Marlin/thermistortable_147.h | 33 + Marlin/thermistortable_2.h | 61 ++ Marlin/thermistortable_20.h | 96 +++ Marlin/thermistortable_3.h | 53 ++ Marlin/thermistortable_4.h | 45 ++ Marlin/thermistortable_5.h | 60 ++ Marlin/thermistortable_51.h | 81 ++ Marlin/thermistortable_52.h | 60 ++ Marlin/thermistortable_55.h | 60 ++ Marlin/thermistortable_6.h | 63 ++ Marlin/thermistortable_60.h | 105 +++ Marlin/thermistortable_66.h | 52 ++ Marlin/thermistortable_7.h | 83 ++ Marlin/thermistortable_70.h | 86 +++ Marlin/thermistortable_71.h | 171 +++++ Marlin/thermistortable_8.h | 45 ++ Marlin/thermistortable_9.h | 56 ++ Marlin/thermistortable_998.h | 32 + Marlin/thermistortable_999.h | 32 + Marlin/thermistortables.h | 1358 ++++----------------------------- 28 files changed, 1830 insertions(+), 1229 deletions(-) create mode 100644 Marlin/thermistortable_1.h create mode 100644 Marlin/thermistortable_10.h create mode 100644 Marlin/thermistortable_1010.h create mode 100644 Marlin/thermistortable_1047.h create mode 100644 Marlin/thermistortable_11.h create mode 100644 Marlin/thermistortable_110.h create mode 100644 Marlin/thermistortable_12.h create mode 100644 Marlin/thermistortable_13.h create mode 100644 Marlin/thermistortable_147.h create mode 100644 Marlin/thermistortable_2.h create mode 100644 Marlin/thermistortable_20.h create mode 100644 Marlin/thermistortable_3.h create mode 100644 Marlin/thermistortable_4.h create mode 100644 Marlin/thermistortable_5.h create mode 100644 Marlin/thermistortable_51.h create mode 100644 Marlin/thermistortable_52.h create mode 100644 Marlin/thermistortable_55.h create mode 100644 Marlin/thermistortable_6.h create mode 100644 Marlin/thermistortable_60.h create mode 100644 Marlin/thermistortable_66.h create mode 100644 Marlin/thermistortable_7.h create mode 100644 Marlin/thermistortable_70.h create mode 100644 Marlin/thermistortable_71.h create mode 100644 Marlin/thermistortable_8.h create mode 100644 Marlin/thermistortable_9.h create mode 100644 Marlin/thermistortable_998.h create mode 100644 Marlin/thermistortable_999.h diff --git a/Marlin/thermistortable_1.h b/Marlin/thermistortable_1.h new file mode 100644 index 0000000000..b1a91b5e5d --- /dev/null +++ b/Marlin/thermistortable_1.h @@ -0,0 +1,89 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// 100k bed thermistor +const short temptable_1[][2] PROGMEM = { + { 23 * OVERSAMPLENR, 300 }, + { 25 * OVERSAMPLENR, 295 }, + { 27 * OVERSAMPLENR, 290 }, + { 28 * OVERSAMPLENR, 285 }, + { 31 * OVERSAMPLENR, 280 }, + { 33 * OVERSAMPLENR, 275 }, + { 35 * OVERSAMPLENR, 270 }, + { 38 * OVERSAMPLENR, 265 }, + { 41 * OVERSAMPLENR, 260 }, + { 44 * OVERSAMPLENR, 255 }, + { 48 * OVERSAMPLENR, 250 }, + { 52 * OVERSAMPLENR, 245 }, + { 56 * OVERSAMPLENR, 240 }, + { 61 * OVERSAMPLENR, 235 }, + { 66 * OVERSAMPLENR, 230 }, + { 71 * OVERSAMPLENR, 225 }, + { 78 * OVERSAMPLENR, 220 }, + { 84 * OVERSAMPLENR, 215 }, + { 92 * OVERSAMPLENR, 210 }, + { 100 * OVERSAMPLENR, 205 }, + { 109 * OVERSAMPLENR, 200 }, + { 120 * OVERSAMPLENR, 195 }, + { 131 * OVERSAMPLENR, 190 }, + { 143 * OVERSAMPLENR, 185 }, + { 156 * OVERSAMPLENR, 180 }, + { 171 * OVERSAMPLENR, 175 }, + { 187 * OVERSAMPLENR, 170 }, + { 205 * OVERSAMPLENR, 165 }, + { 224 * OVERSAMPLENR, 160 }, + { 245 * OVERSAMPLENR, 155 }, + { 268 * OVERSAMPLENR, 150 }, + { 293 * OVERSAMPLENR, 145 }, + { 320 * OVERSAMPLENR, 140 }, + { 348 * OVERSAMPLENR, 135 }, + { 379 * OVERSAMPLENR, 130 }, + { 411 * OVERSAMPLENR, 125 }, + { 445 * OVERSAMPLENR, 120 }, + { 480 * OVERSAMPLENR, 115 }, + { 516 * OVERSAMPLENR, 110 }, + { 553 * OVERSAMPLENR, 105 }, + { 591 * OVERSAMPLENR, 100 }, + { 628 * OVERSAMPLENR, 95 }, + { 665 * OVERSAMPLENR, 90 }, + { 702 * OVERSAMPLENR, 85 }, + { 737 * OVERSAMPLENR, 80 }, + { 770 * OVERSAMPLENR, 75 }, + { 801 * OVERSAMPLENR, 70 }, + { 830 * OVERSAMPLENR, 65 }, + { 857 * OVERSAMPLENR, 60 }, + { 881 * OVERSAMPLENR, 55 }, + { 903 * OVERSAMPLENR, 50 }, + { 922 * OVERSAMPLENR, 45 }, + { 939 * OVERSAMPLENR, 40 }, + { 954 * OVERSAMPLENR, 35 }, + { 966 * OVERSAMPLENR, 30 }, + { 977 * OVERSAMPLENR, 25 }, + { 985 * OVERSAMPLENR, 20 }, + { 993 * OVERSAMPLENR, 15 }, + { 999 * OVERSAMPLENR, 10 }, + { 1004 * OVERSAMPLENR, 5 }, + { 1008 * OVERSAMPLENR, 0 }, + { 1012 * OVERSAMPLENR, -5 }, + { 1016 * OVERSAMPLENR, -10 }, + { 1020 * OVERSAMPLENR, -15 } +}; diff --git a/Marlin/thermistortable_10.h b/Marlin/thermistortable_10.h new file mode 100644 index 0000000000..a031648a9d --- /dev/null +++ b/Marlin/thermistortable_10.h @@ -0,0 +1,56 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// 100k RS thermistor 198-961 (4.7k pullup) +const short temptable_10[][2] PROGMEM = { + { 1 * OVERSAMPLENR, 929 }, + { 36 * OVERSAMPLENR, 299 }, + { 71 * OVERSAMPLENR, 246 }, + { 106 * OVERSAMPLENR, 217 }, + { 141 * OVERSAMPLENR, 198 }, + { 176 * OVERSAMPLENR, 184 }, + { 211 * OVERSAMPLENR, 173 }, + { 246 * OVERSAMPLENR, 163 }, + { 281 * OVERSAMPLENR, 154 }, + { 316 * OVERSAMPLENR, 147 }, + { 351 * OVERSAMPLENR, 140 }, + { 386 * OVERSAMPLENR, 134 }, + { 421 * OVERSAMPLENR, 128 }, + { 456 * OVERSAMPLENR, 122 }, + { 491 * OVERSAMPLENR, 117 }, + { 526 * OVERSAMPLENR, 112 }, + { 561 * OVERSAMPLENR, 107 }, + { 596 * OVERSAMPLENR, 102 }, + { 631 * OVERSAMPLENR, 97 }, + { 666 * OVERSAMPLENR, 91 }, + { 701 * OVERSAMPLENR, 86 }, + { 736 * OVERSAMPLENR, 81 }, + { 771 * OVERSAMPLENR, 76 }, + { 806 * OVERSAMPLENR, 70 }, + { 841 * OVERSAMPLENR, 63 }, + { 876 * OVERSAMPLENR, 56 }, + { 911 * OVERSAMPLENR, 48 }, + { 946 * OVERSAMPLENR, 38 }, + { 981 * OVERSAMPLENR, 23 }, + { 1005 * OVERSAMPLENR, 5 }, + { 1016 * OVERSAMPLENR, 0 } +}; diff --git a/Marlin/thermistortable_1010.h b/Marlin/thermistortable_1010.h new file mode 100644 index 0000000000..79a557954e --- /dev/null +++ b/Marlin/thermistortable_1010.h @@ -0,0 +1,38 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// Pt1000 with 1k0 pullup +const short temptable_1010[][2] PROGMEM = { + PtLine( 0, 1000, 1000) + PtLine( 25, 1000, 1000) + PtLine( 50, 1000, 1000) + PtLine( 75, 1000, 1000) + PtLine(100, 1000, 1000) + PtLine(125, 1000, 1000) + PtLine(150, 1000, 1000) + PtLine(175, 1000, 1000) + PtLine(200, 1000, 1000) + PtLine(225, 1000, 1000) + PtLine(250, 1000, 1000) + PtLine(275, 1000, 1000) + PtLine(300, 1000, 1000) +}; diff --git a/Marlin/thermistortable_1047.h b/Marlin/thermistortable_1047.h new file mode 100644 index 0000000000..01997abc3a --- /dev/null +++ b/Marlin/thermistortable_1047.h @@ -0,0 +1,33 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// Pt1000 with 4k7 pullup +const short temptable_1047[][2] PROGMEM = { + // only a few values are needed as the curve is very flat + PtLine( 0, 1000, 4700) + PtLine( 50, 1000, 4700) + PtLine(100, 1000, 4700) + PtLine(150, 1000, 4700) + PtLine(200, 1000, 4700) + PtLine(250, 1000, 4700) + PtLine(300, 1000, 4700) +}; diff --git a/Marlin/thermistortable_11.h b/Marlin/thermistortable_11.h new file mode 100644 index 0000000000..f0f2697359 --- /dev/null +++ b/Marlin/thermistortable_11.h @@ -0,0 +1,75 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// QU-BD silicone bed QWG-104F-3950 thermistor +const short temptable_11[][2] PROGMEM = { + { 1 * OVERSAMPLENR, 938 }, + { 31 * OVERSAMPLENR, 314 }, + { 41 * OVERSAMPLENR, 290 }, + { 51 * OVERSAMPLENR, 272 }, + { 61 * OVERSAMPLENR, 258 }, + { 71 * OVERSAMPLENR, 247 }, + { 81 * OVERSAMPLENR, 237 }, + { 91 * OVERSAMPLENR, 229 }, + { 101 * OVERSAMPLENR, 221 }, + { 111 * OVERSAMPLENR, 215 }, + { 121 * OVERSAMPLENR, 209 }, + { 131 * OVERSAMPLENR, 204 }, + { 141 * OVERSAMPLENR, 199 }, + { 151 * OVERSAMPLENR, 195 }, + { 161 * OVERSAMPLENR, 190 }, + { 171 * OVERSAMPLENR, 187 }, + { 181 * OVERSAMPLENR, 183 }, + { 191 * OVERSAMPLENR, 179 }, + { 201 * OVERSAMPLENR, 176 }, + { 221 * OVERSAMPLENR, 170 }, + { 241 * OVERSAMPLENR, 165 }, + { 261 * OVERSAMPLENR, 160 }, + { 281 * OVERSAMPLENR, 155 }, + { 301 * OVERSAMPLENR, 150 }, + { 331 * OVERSAMPLENR, 144 }, + { 361 * OVERSAMPLENR, 139 }, + { 391 * OVERSAMPLENR, 133 }, + { 421 * OVERSAMPLENR, 128 }, + { 451 * OVERSAMPLENR, 123 }, + { 491 * OVERSAMPLENR, 117 }, + { 531 * OVERSAMPLENR, 111 }, + { 571 * OVERSAMPLENR, 105 }, + { 611 * OVERSAMPLENR, 100 }, + { 641 * OVERSAMPLENR, 95 }, + { 681 * OVERSAMPLENR, 90 }, + { 711 * OVERSAMPLENR, 85 }, + { 751 * OVERSAMPLENR, 79 }, + { 791 * OVERSAMPLENR, 72 }, + { 811 * OVERSAMPLENR, 69 }, + { 831 * OVERSAMPLENR, 65 }, + { 871 * OVERSAMPLENR, 57 }, + { 881 * OVERSAMPLENR, 55 }, + { 901 * OVERSAMPLENR, 51 }, + { 921 * OVERSAMPLENR, 45 }, + { 941 * OVERSAMPLENR, 39 }, + { 971 * OVERSAMPLENR, 28 }, + { 981 * OVERSAMPLENR, 23 }, + { 991 * OVERSAMPLENR, 17 }, + { 1001 * OVERSAMPLENR, 9 }, + { 1021 * OVERSAMPLENR, -27 } +}; diff --git a/Marlin/thermistortable_110.h b/Marlin/thermistortable_110.h new file mode 100644 index 0000000000..7a4c80df71 --- /dev/null +++ b/Marlin/thermistortable_110.h @@ -0,0 +1,33 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// Pt100 with 1k0 pullup +const short temptable_110[][2] PROGMEM = { + // only a few values are needed as the curve is very flat + PtLine( 0, 100, 1000) + PtLine( 50, 100, 1000) + PtLine(100, 100, 1000) + PtLine(150, 100, 1000) + PtLine(200, 100, 1000) + PtLine(250, 100, 1000) + PtLine(300, 100, 1000) +}; diff --git a/Marlin/thermistortable_12.h b/Marlin/thermistortable_12.h new file mode 100644 index 0000000000..802c1d37d3 --- /dev/null +++ b/Marlin/thermistortable_12.h @@ -0,0 +1,55 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) +const short temptable_12[][2] PROGMEM = { + { 35 * OVERSAMPLENR, 180 }, // top rating 180C + { 211 * OVERSAMPLENR, 140 }, + { 233 * OVERSAMPLENR, 135 }, + { 261 * OVERSAMPLENR, 130 }, + { 290 * OVERSAMPLENR, 125 }, + { 328 * OVERSAMPLENR, 120 }, + { 362 * OVERSAMPLENR, 115 }, + { 406 * OVERSAMPLENR, 110 }, + { 446 * OVERSAMPLENR, 105 }, + { 496 * OVERSAMPLENR, 100 }, + { 539 * OVERSAMPLENR, 95 }, + { 585 * OVERSAMPLENR, 90 }, + { 629 * OVERSAMPLENR, 85 }, + { 675 * OVERSAMPLENR, 80 }, + { 718 * OVERSAMPLENR, 75 }, + { 758 * OVERSAMPLENR, 70 }, + { 793 * OVERSAMPLENR, 65 }, + { 822 * OVERSAMPLENR, 60 }, + { 841 * OVERSAMPLENR, 55 }, + { 875 * OVERSAMPLENR, 50 }, + { 899 * OVERSAMPLENR, 45 }, + { 926 * OVERSAMPLENR, 40 }, + { 946 * OVERSAMPLENR, 35 }, + { 962 * OVERSAMPLENR, 30 }, + { 977 * OVERSAMPLENR, 25 }, + { 987 * OVERSAMPLENR, 20 }, + { 995 * OVERSAMPLENR, 15 }, + { 1001 * OVERSAMPLENR, 10 }, + { 1010 * OVERSAMPLENR, 0 }, + { 1023 * OVERSAMPLENR, -40 } +}; diff --git a/Marlin/thermistortable_13.h b/Marlin/thermistortable_13.h new file mode 100644 index 0000000000..1269c35665 --- /dev/null +++ b/Marlin/thermistortable_13.h @@ -0,0 +1,48 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// Hisens thermistor B25/50 =3950 +/-1% +const short temptable_13[][2] PROGMEM = { + { 20.04 * OVERSAMPLENR, 300 }, + { 23.19 * OVERSAMPLENR, 290 }, + { 26.71 * OVERSAMPLENR, 280 }, + { 31.23 * OVERSAMPLENR, 270 }, + { 36.52 * OVERSAMPLENR, 260 }, + { 42.75 * OVERSAMPLENR, 250 }, + { 50.68 * OVERSAMPLENR, 240 }, + { 60.22 * OVERSAMPLENR, 230 }, + { 72.03 * OVERSAMPLENR, 220 }, + { 86.84 * OVERSAMPLENR, 210 }, + { 102.79 * OVERSAMPLENR, 200 }, + { 124.46 * OVERSAMPLENR, 190 }, + { 151.02 * OVERSAMPLENR, 180 }, + { 182.86 * OVERSAMPLENR, 170 }, + { 220.72 * OVERSAMPLENR, 160 }, + { 316.96 * OVERSAMPLENR, 140 }, + { 447.17 * OVERSAMPLENR, 120 }, + { 590.61 * OVERSAMPLENR, 100 }, + { 737.31 * OVERSAMPLENR, 80 }, + { 857.77 * OVERSAMPLENR, 60 }, + { 939.52 * OVERSAMPLENR, 40 }, + { 986.03 * OVERSAMPLENR, 20 }, + { 1008.7 * OVERSAMPLENR, 0 } +}; diff --git a/Marlin/thermistortable_147.h b/Marlin/thermistortable_147.h new file mode 100644 index 0000000000..7e4a3b6fb6 --- /dev/null +++ b/Marlin/thermistortable_147.h @@ -0,0 +1,33 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// Pt100 with 4k7 pullup +const short temptable_147[][2] PROGMEM = { + // only a few values are needed as the curve is very flat + PtLine( 0, 100, 4700) + PtLine( 50, 100, 4700) + PtLine(100, 100, 4700) + PtLine(150, 100, 4700) + PtLine(200, 100, 4700) + PtLine(250, 100, 4700) + PtLine(300, 100, 4700) +}; diff --git a/Marlin/thermistortable_2.h b/Marlin/thermistortable_2.h new file mode 100644 index 0000000000..1b56faed9d --- /dev/null +++ b/Marlin/thermistortable_2.h @@ -0,0 +1,61 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// +// 200k ATC Semitec 204GT-2 +// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf +// Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance +// +const short temptable_2[][2] PROGMEM = { + { 1 * OVERSAMPLENR, 848 }, + { 30 * OVERSAMPLENR, 300 }, // top rating 300C + { 34 * OVERSAMPLENR, 290 }, + { 39 * OVERSAMPLENR, 280 }, + { 46 * OVERSAMPLENR, 270 }, + { 53 * OVERSAMPLENR, 260 }, + { 63 * OVERSAMPLENR, 250 }, + { 74 * OVERSAMPLENR, 240 }, + { 87 * OVERSAMPLENR, 230 }, + { 104 * OVERSAMPLENR, 220 }, + { 124 * OVERSAMPLENR, 210 }, + { 148 * OVERSAMPLENR, 200 }, + { 176 * OVERSAMPLENR, 190 }, + { 211 * OVERSAMPLENR, 180 }, + { 252 * OVERSAMPLENR, 170 }, + { 301 * OVERSAMPLENR, 160 }, + { 357 * OVERSAMPLENR, 150 }, + { 420 * OVERSAMPLENR, 140 }, + { 489 * OVERSAMPLENR, 130 }, + { 562 * OVERSAMPLENR, 120 }, + { 636 * OVERSAMPLENR, 110 }, + { 708 * OVERSAMPLENR, 100 }, + { 775 * OVERSAMPLENR, 90 }, + { 835 * OVERSAMPLENR, 80 }, + { 884 * OVERSAMPLENR, 70 }, + { 924 * OVERSAMPLENR, 60 }, + { 955 * OVERSAMPLENR, 50 }, + { 977 * OVERSAMPLENR, 40 }, + { 993 * OVERSAMPLENR, 30 }, + { 1004 * OVERSAMPLENR, 20 }, + { 1012 * OVERSAMPLENR, 10 }, + { 1016 * OVERSAMPLENR, 0 } +}; diff --git a/Marlin/thermistortable_20.h b/Marlin/thermistortable_20.h new file mode 100644 index 0000000000..65f77cebdb --- /dev/null +++ b/Marlin/thermistortable_20.h @@ -0,0 +1,96 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// PT100 with INA826 amp on Ultimaker v2.0 electronics +// The PT100 in the Ultimaker v2.0 electronics has a high sample value for a high temperature. +// This does not match the normal thermistor behaviour so we need to set the following defines +#if (THERMISTORHEATER_0 == 20) + #define HEATER_0_RAW_HI_TEMP 16383 + #define HEATER_0_RAW_LO_TEMP 0 +#endif +#if (THERMISTORHEATER_1 == 20) + #define HEATER_1_RAW_HI_TEMP 16383 + #define HEATER_1_RAW_LO_TEMP 0 +#endif +#if (THERMISTORHEATER_2 == 20) + #define HEATER_2_RAW_HI_TEMP 16383 + #define HEATER_2_RAW_LO_TEMP 0 +#endif +#if (THERMISTORHEATER_3 == 20) + #define HEATER_3_RAW_HI_TEMP 16383 + #define HEATER_3_RAW_LO_TEMP 0 +#endif +#if (THERMISTORBED == 20) + #define HEATER_BED_RAW_HI_TEMP 16383 + #define HEATER_BED_RAW_LO_TEMP 0 +#endif +const short temptable_20[][2] PROGMEM = { + { 0 * OVERSAMPLENR, 0 }, + { 227 * OVERSAMPLENR, 1 }, + { 236 * OVERSAMPLENR, 10 }, + { 245 * OVERSAMPLENR, 20 }, + { 253 * OVERSAMPLENR, 30 }, + { 262 * OVERSAMPLENR, 40 }, + { 270 * OVERSAMPLENR, 50 }, + { 279 * OVERSAMPLENR, 60 }, + { 287 * OVERSAMPLENR, 70 }, + { 295 * OVERSAMPLENR, 80 }, + { 304 * OVERSAMPLENR, 90 }, + { 312 * OVERSAMPLENR, 100 }, + { 320 * OVERSAMPLENR, 110 }, + { 329 * OVERSAMPLENR, 120 }, + { 337 * OVERSAMPLENR, 130 }, + { 345 * OVERSAMPLENR, 140 }, + { 353 * OVERSAMPLENR, 150 }, + { 361 * OVERSAMPLENR, 160 }, + { 369 * OVERSAMPLENR, 170 }, + { 377 * OVERSAMPLENR, 180 }, + { 385 * OVERSAMPLENR, 190 }, + { 393 * OVERSAMPLENR, 200 }, + { 401 * OVERSAMPLENR, 210 }, + { 409 * OVERSAMPLENR, 220 }, + { 417 * OVERSAMPLENR, 230 }, + { 424 * OVERSAMPLENR, 240 }, + { 432 * OVERSAMPLENR, 250 }, + { 440 * OVERSAMPLENR, 260 }, + { 447 * OVERSAMPLENR, 270 }, + { 455 * OVERSAMPLENR, 280 }, + { 463 * OVERSAMPLENR, 290 }, + { 470 * OVERSAMPLENR, 300 }, + { 478 * OVERSAMPLENR, 310 }, + { 485 * OVERSAMPLENR, 320 }, + { 493 * OVERSAMPLENR, 330 }, + { 500 * OVERSAMPLENR, 340 }, + { 507 * OVERSAMPLENR, 350 }, + { 515 * OVERSAMPLENR, 360 }, + { 522 * OVERSAMPLENR, 370 }, + { 529 * OVERSAMPLENR, 380 }, + { 537 * OVERSAMPLENR, 390 }, + { 544 * OVERSAMPLENR, 400 }, + { 614 * OVERSAMPLENR, 500 }, + { 681 * OVERSAMPLENR, 600 }, + { 744 * OVERSAMPLENR, 700 }, + { 805 * OVERSAMPLENR, 800 }, + { 862 * OVERSAMPLENR, 900 }, + { 917 * OVERSAMPLENR, 1000 }, + { 968 * OVERSAMPLENR, 1100 } +}; diff --git a/Marlin/thermistortable_3.h b/Marlin/thermistortable_3.h new file mode 100644 index 0000000000..0fc16d4bf7 --- /dev/null +++ b/Marlin/thermistortable_3.h @@ -0,0 +1,53 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// mendel-parts +const short temptable_3[][2] PROGMEM = { + { 1 * OVERSAMPLENR, 864 }, + { 21 * OVERSAMPLENR, 300 }, + { 25 * OVERSAMPLENR, 290 }, + { 29 * OVERSAMPLENR, 280 }, + { 33 * OVERSAMPLENR, 270 }, + { 39 * OVERSAMPLENR, 260 }, + { 46 * OVERSAMPLENR, 250 }, + { 54 * OVERSAMPLENR, 240 }, + { 64 * OVERSAMPLENR, 230 }, + { 75 * OVERSAMPLENR, 220 }, + { 90 * OVERSAMPLENR, 210 }, + { 107 * OVERSAMPLENR, 200 }, + { 128 * OVERSAMPLENR, 190 }, + { 154 * OVERSAMPLENR, 180 }, + { 184 * OVERSAMPLENR, 170 }, + { 221 * OVERSAMPLENR, 160 }, + { 265 * OVERSAMPLENR, 150 }, + { 316 * OVERSAMPLENR, 140 }, + { 375 * OVERSAMPLENR, 130 }, + { 441 * OVERSAMPLENR, 120 }, + { 513 * OVERSAMPLENR, 110 }, + { 588 * OVERSAMPLENR, 100 }, + { 734 * OVERSAMPLENR, 80 }, + { 856 * OVERSAMPLENR, 60 }, + { 938 * OVERSAMPLENR, 40 }, + { 986 * OVERSAMPLENR, 20 }, + { 1008 * OVERSAMPLENR, 0 }, + { 1018 * OVERSAMPLENR, -20 } +}; diff --git a/Marlin/thermistortable_4.h b/Marlin/thermistortable_4.h new file mode 100644 index 0000000000..83e60cd6ad --- /dev/null +++ b/Marlin/thermistortable_4.h @@ -0,0 +1,45 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// 10k thermistor +const short temptable_4[][2] PROGMEM = { + { 1 * OVERSAMPLENR, 430 }, + { 54 * OVERSAMPLENR, 137 }, + { 107 * OVERSAMPLENR, 107 }, + { 160 * OVERSAMPLENR, 91 }, + { 213 * OVERSAMPLENR, 80 }, + { 266 * OVERSAMPLENR, 71 }, + { 319 * OVERSAMPLENR, 64 }, + { 372 * OVERSAMPLENR, 57 }, + { 425 * OVERSAMPLENR, 51 }, + { 478 * OVERSAMPLENR, 46 }, + { 531 * OVERSAMPLENR, 41 }, + { 584 * OVERSAMPLENR, 35 }, + { 637 * OVERSAMPLENR, 30 }, + { 690 * OVERSAMPLENR, 25 }, + { 743 * OVERSAMPLENR, 20 }, + { 796 * OVERSAMPLENR, 14 }, + { 849 * OVERSAMPLENR, 7 }, + { 902 * OVERSAMPLENR, 0 }, + { 955 * OVERSAMPLENR, -11 }, + { 1008 * OVERSAMPLENR, -35 } +}; diff --git a/Marlin/thermistortable_5.h b/Marlin/thermistortable_5.h new file mode 100644 index 0000000000..8bad71308f --- /dev/null +++ b/Marlin/thermistortable_5.h @@ -0,0 +1,60 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// 100k ParCan thermistor (104GT-2) +// ATC Semitec 104GT-2 (Used in ParCan) +// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf +// Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance +const short temptable_5[][2] PROGMEM = { + { 1 * OVERSAMPLENR, 713 }, + { 17 * OVERSAMPLENR, 300 }, // top rating 300C + { 20 * OVERSAMPLENR, 290 }, + { 23 * OVERSAMPLENR, 280 }, + { 27 * OVERSAMPLENR, 270 }, + { 31 * OVERSAMPLENR, 260 }, + { 37 * OVERSAMPLENR, 250 }, + { 43 * OVERSAMPLENR, 240 }, + { 51 * OVERSAMPLENR, 230 }, + { 61 * OVERSAMPLENR, 220 }, + { 73 * OVERSAMPLENR, 210 }, + { 87 * OVERSAMPLENR, 200 }, + { 106 * OVERSAMPLENR, 190 }, + { 128 * OVERSAMPLENR, 180 }, + { 155 * OVERSAMPLENR, 170 }, + { 189 * OVERSAMPLENR, 160 }, + { 230 * OVERSAMPLENR, 150 }, + { 278 * OVERSAMPLENR, 140 }, + { 336 * OVERSAMPLENR, 130 }, + { 402 * OVERSAMPLENR, 120 }, + { 476 * OVERSAMPLENR, 110 }, + { 554 * OVERSAMPLENR, 100 }, + { 635 * OVERSAMPLENR, 90 }, + { 713 * OVERSAMPLENR, 80 }, + { 784 * OVERSAMPLENR, 70 }, + { 846 * OVERSAMPLENR, 60 }, + { 897 * OVERSAMPLENR, 50 }, + { 937 * OVERSAMPLENR, 40 }, + { 966 * OVERSAMPLENR, 30 }, + { 986 * OVERSAMPLENR, 20 }, + { 1000 * OVERSAMPLENR, 10 }, + { 1010 * OVERSAMPLENR, 0 } +}; diff --git a/Marlin/thermistortable_51.h b/Marlin/thermistortable_51.h new file mode 100644 index 0000000000..44f7142bbe --- /dev/null +++ b/Marlin/thermistortable_51.h @@ -0,0 +1,81 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// 100k EPCOS (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!) +// Verified by linagee. +// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance +// Advantage: Twice the resolution and better linearity from 150C to 200C +const short temptable_51[][2] PROGMEM = { + { 1 * OVERSAMPLENR, 350 }, + { 190 * OVERSAMPLENR, 250 }, // top rating 250C + { 203 * OVERSAMPLENR, 245 }, + { 217 * OVERSAMPLENR, 240 }, + { 232 * OVERSAMPLENR, 235 }, + { 248 * OVERSAMPLENR, 230 }, + { 265 * OVERSAMPLENR, 225 }, + { 283 * OVERSAMPLENR, 220 }, + { 302 * OVERSAMPLENR, 215 }, + { 322 * OVERSAMPLENR, 210 }, + { 344 * OVERSAMPLENR, 205 }, + { 366 * OVERSAMPLENR, 200 }, + { 390 * OVERSAMPLENR, 195 }, + { 415 * OVERSAMPLENR, 190 }, + { 440 * OVERSAMPLENR, 185 }, + { 467 * OVERSAMPLENR, 180 }, + { 494 * OVERSAMPLENR, 175 }, + { 522 * OVERSAMPLENR, 170 }, + { 551 * OVERSAMPLENR, 165 }, + { 580 * OVERSAMPLENR, 160 }, + { 609 * OVERSAMPLENR, 155 }, + { 638 * OVERSAMPLENR, 150 }, + { 666 * OVERSAMPLENR, 145 }, + { 695 * OVERSAMPLENR, 140 }, + { 722 * OVERSAMPLENR, 135 }, + { 749 * OVERSAMPLENR, 130 }, + { 775 * OVERSAMPLENR, 125 }, + { 800 * OVERSAMPLENR, 120 }, + { 823 * OVERSAMPLENR, 115 }, + { 845 * OVERSAMPLENR, 110 }, + { 865 * OVERSAMPLENR, 105 }, + { 884 * OVERSAMPLENR, 100 }, + { 901 * OVERSAMPLENR, 95 }, + { 917 * OVERSAMPLENR, 90 }, + { 932 * OVERSAMPLENR, 85 }, + { 944 * OVERSAMPLENR, 80 }, + { 956 * OVERSAMPLENR, 75 }, + { 966 * OVERSAMPLENR, 70 }, + { 975 * OVERSAMPLENR, 65 }, + { 982 * OVERSAMPLENR, 60 }, + { 989 * OVERSAMPLENR, 55 }, + { 995 * OVERSAMPLENR, 50 }, + { 1000 * OVERSAMPLENR, 45 }, + { 1004 * OVERSAMPLENR, 40 }, + { 1007 * OVERSAMPLENR, 35 }, + { 1010 * OVERSAMPLENR, 30 }, + { 1013 * OVERSAMPLENR, 25 }, + { 1015 * OVERSAMPLENR, 20 }, + { 1017 * OVERSAMPLENR, 15 }, + { 1018 * OVERSAMPLENR, 10 }, + { 1019 * OVERSAMPLENR, 5 }, + { 1020 * OVERSAMPLENR, 0 }, + { 1021 * OVERSAMPLENR, -5 } +}; diff --git a/Marlin/thermistortable_52.h b/Marlin/thermistortable_52.h new file mode 100644 index 0000000000..bf4e6a9e8b --- /dev/null +++ b/Marlin/thermistortable_52.h @@ -0,0 +1,60 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!) +// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf +// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance +// Advantage: More resolution and better linearity from 150C to 200C +const short temptable_52[][2] PROGMEM = { + { 1 * OVERSAMPLENR, 500 }, + { 125 * OVERSAMPLENR, 300 }, // top rating 300C + { 142 * OVERSAMPLENR, 290 }, + { 162 * OVERSAMPLENR, 280 }, + { 185 * OVERSAMPLENR, 270 }, + { 211 * OVERSAMPLENR, 260 }, + { 240 * OVERSAMPLENR, 250 }, + { 274 * OVERSAMPLENR, 240 }, + { 312 * OVERSAMPLENR, 230 }, + { 355 * OVERSAMPLENR, 220 }, + { 401 * OVERSAMPLENR, 210 }, + { 452 * OVERSAMPLENR, 200 }, + { 506 * OVERSAMPLENR, 190 }, + { 563 * OVERSAMPLENR, 180 }, + { 620 * OVERSAMPLENR, 170 }, + { 677 * OVERSAMPLENR, 160 }, + { 732 * OVERSAMPLENR, 150 }, + { 783 * OVERSAMPLENR, 140 }, + { 830 * OVERSAMPLENR, 130 }, + { 871 * OVERSAMPLENR, 120 }, + { 906 * OVERSAMPLENR, 110 }, + { 935 * OVERSAMPLENR, 100 }, + { 958 * OVERSAMPLENR, 90 }, + { 976 * OVERSAMPLENR, 80 }, + { 990 * OVERSAMPLENR, 70 }, + { 1000 * OVERSAMPLENR, 60 }, + { 1008 * OVERSAMPLENR, 50 }, + { 1013 * OVERSAMPLENR, 40 }, + { 1017 * OVERSAMPLENR, 30 }, + { 1019 * OVERSAMPLENR, 20 }, + { 1021 * OVERSAMPLENR, 10 }, + { 1022 * OVERSAMPLENR, 0 } +}; diff --git a/Marlin/thermistortable_55.h b/Marlin/thermistortable_55.h new file mode 100644 index 0000000000..76e43db6ee --- /dev/null +++ b/Marlin/thermistortable_55.h @@ -0,0 +1,60 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!) +// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf +// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance +// Advantage: More resolution and better linearity from 150C to 200C +const short temptable_55[][2] PROGMEM = { + { 1 * OVERSAMPLENR, 500 }, + { 76 * OVERSAMPLENR, 300 }, + { 87 * OVERSAMPLENR, 290 }, + { 100 * OVERSAMPLENR, 280 }, + { 114 * OVERSAMPLENR, 270 }, + { 131 * OVERSAMPLENR, 260 }, + { 152 * OVERSAMPLENR, 250 }, + { 175 * OVERSAMPLENR, 240 }, + { 202 * OVERSAMPLENR, 230 }, + { 234 * OVERSAMPLENR, 220 }, + { 271 * OVERSAMPLENR, 210 }, + { 312 * OVERSAMPLENR, 200 }, + { 359 * OVERSAMPLENR, 190 }, + { 411 * OVERSAMPLENR, 180 }, + { 467 * OVERSAMPLENR, 170 }, + { 527 * OVERSAMPLENR, 160 }, + { 590 * OVERSAMPLENR, 150 }, + { 652 * OVERSAMPLENR, 140 }, + { 713 * OVERSAMPLENR, 130 }, + { 770 * OVERSAMPLENR, 120 }, + { 822 * OVERSAMPLENR, 110 }, + { 867 * OVERSAMPLENR, 100 }, + { 905 * OVERSAMPLENR, 90 }, + { 936 * OVERSAMPLENR, 80 }, + { 961 * OVERSAMPLENR, 70 }, + { 979 * OVERSAMPLENR, 60 }, + { 993 * OVERSAMPLENR, 50 }, + { 1003 * OVERSAMPLENR, 40 }, + { 1010 * OVERSAMPLENR, 30 }, + { 1015 * OVERSAMPLENR, 20 }, + { 1018 * OVERSAMPLENR, 10 }, + { 1020 * OVERSAMPLENR, 0 } +}; diff --git a/Marlin/thermistortable_6.h b/Marlin/thermistortable_6.h new file mode 100644 index 0000000000..d270b60d37 --- /dev/null +++ b/Marlin/thermistortable_6.h @@ -0,0 +1,63 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// 100k Epcos thermistor +const short temptable_6[][2] PROGMEM = { + { 1 * OVERSAMPLENR, 350 }, + { 28 * OVERSAMPLENR, 250 }, // top rating 250C + { 31 * OVERSAMPLENR, 245 }, + { 35 * OVERSAMPLENR, 240 }, + { 39 * OVERSAMPLENR, 235 }, + { 42 * OVERSAMPLENR, 230 }, + { 44 * OVERSAMPLENR, 225 }, + { 49 * OVERSAMPLENR, 220 }, + { 53 * OVERSAMPLENR, 215 }, + { 62 * OVERSAMPLENR, 210 }, + { 71 * OVERSAMPLENR, 205 }, // fitted graphically + { 78 * OVERSAMPLENR, 200 }, // fitted graphically + { 94 * OVERSAMPLENR, 190 }, + { 102 * OVERSAMPLENR, 185 }, + { 116 * OVERSAMPLENR, 170 }, + { 143 * OVERSAMPLENR, 160 }, + { 183 * OVERSAMPLENR, 150 }, + { 223 * OVERSAMPLENR, 140 }, + { 270 * OVERSAMPLENR, 130 }, + { 318 * OVERSAMPLENR, 120 }, + { 383 * OVERSAMPLENR, 110 }, + { 413 * OVERSAMPLENR, 105 }, + { 439 * OVERSAMPLENR, 100 }, + { 484 * OVERSAMPLENR, 95 }, + { 513 * OVERSAMPLENR, 90 }, + { 607 * OVERSAMPLENR, 80 }, + { 664 * OVERSAMPLENR, 70 }, + { 781 * OVERSAMPLENR, 60 }, + { 810 * OVERSAMPLENR, 55 }, + { 849 * OVERSAMPLENR, 50 }, + { 914 * OVERSAMPLENR, 45 }, + { 914 * OVERSAMPLENR, 40 }, + { 935 * OVERSAMPLENR, 35 }, + { 954 * OVERSAMPLENR, 30 }, + { 970 * OVERSAMPLENR, 25 }, + { 978 * OVERSAMPLENR, 22 }, + { 1008 * OVERSAMPLENR, 3 }, + { 1023 * OVERSAMPLENR, 0 } // to allow internal 0 degrees C +}; diff --git a/Marlin/thermistortable_60.h b/Marlin/thermistortable_60.h new file mode 100644 index 0000000000..a1c2645b9e --- /dev/null +++ b/Marlin/thermistortable_60.h @@ -0,0 +1,105 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// Maker's Tool Works Kapton Bed Thermistor +// ./createTemperatureLookup.py --r0=100000 --t0=25 --r1=0 --r2=4700 --beta=3950 +// r0: 100000 +// t0: 25 +// r1: 0 (parallel with rTherm) +// r2: 4700 (series with rTherm) +// beta: 3950 +// min adc: 1 at 0.0048828125 V +// max adc: 1023 at 4.9951171875 V +const short temptable_60[][2] PROGMEM = { + { 51 * OVERSAMPLENR, 272 }, + { 61 * OVERSAMPLENR, 258 }, + { 71 * OVERSAMPLENR, 247 }, + { 81 * OVERSAMPLENR, 237 }, + { 91 * OVERSAMPLENR, 229 }, + { 101 * OVERSAMPLENR, 221 }, + { 131 * OVERSAMPLENR, 204 }, + { 161 * OVERSAMPLENR, 190 }, + { 191 * OVERSAMPLENR, 179 }, + { 231 * OVERSAMPLENR, 167 }, + { 271 * OVERSAMPLENR, 157 }, + { 311 * OVERSAMPLENR, 148 }, + { 351 * OVERSAMPLENR, 140 }, + { 381 * OVERSAMPLENR, 135 }, + { 411 * OVERSAMPLENR, 130 }, + { 441 * OVERSAMPLENR, 125 }, + { 451 * OVERSAMPLENR, 123 }, + { 461 * OVERSAMPLENR, 122 }, + { 471 * OVERSAMPLENR, 120 }, + { 481 * OVERSAMPLENR, 119 }, + { 491 * OVERSAMPLENR, 117 }, + { 501 * OVERSAMPLENR, 116 }, + { 511 * OVERSAMPLENR, 114 }, + { 521 * OVERSAMPLENR, 113 }, + { 531 * OVERSAMPLENR, 111 }, + { 541 * OVERSAMPLENR, 110 }, + { 551 * OVERSAMPLENR, 108 }, + { 561 * OVERSAMPLENR, 107 }, + { 571 * OVERSAMPLENR, 105 }, + { 581 * OVERSAMPLENR, 104 }, + { 591 * OVERSAMPLENR, 102 }, + { 601 * OVERSAMPLENR, 101 }, + { 611 * OVERSAMPLENR, 100 }, + { 621 * OVERSAMPLENR, 98 }, + { 631 * OVERSAMPLENR, 97 }, + { 641 * OVERSAMPLENR, 95 }, + { 651 * OVERSAMPLENR, 94 }, + { 661 * OVERSAMPLENR, 92 }, + { 671 * OVERSAMPLENR, 91 }, + { 681 * OVERSAMPLENR, 90 }, + { 691 * OVERSAMPLENR, 88 }, + { 701 * OVERSAMPLENR, 87 }, + { 711 * OVERSAMPLENR, 85 }, + { 721 * OVERSAMPLENR, 84 }, + { 731 * OVERSAMPLENR, 82 }, + { 741 * OVERSAMPLENR, 81 }, + { 751 * OVERSAMPLENR, 79 }, + { 761 * OVERSAMPLENR, 77 }, + { 771 * OVERSAMPLENR, 76 }, + { 781 * OVERSAMPLENR, 74 }, + { 791 * OVERSAMPLENR, 72 }, + { 801 * OVERSAMPLENR, 71 }, + { 811 * OVERSAMPLENR, 69 }, + { 821 * OVERSAMPLENR, 67 }, + { 831 * OVERSAMPLENR, 65 }, + { 841 * OVERSAMPLENR, 63 }, + { 851 * OVERSAMPLENR, 62 }, + { 861 * OVERSAMPLENR, 60 }, + { 871 * OVERSAMPLENR, 57 }, + { 881 * OVERSAMPLENR, 55 }, + { 891 * OVERSAMPLENR, 53 }, + { 901 * OVERSAMPLENR, 51 }, + { 911 * OVERSAMPLENR, 48 }, + { 921 * OVERSAMPLENR, 45 }, + { 931 * OVERSAMPLENR, 42 }, + { 941 * OVERSAMPLENR, 39 }, + { 951 * OVERSAMPLENR, 36 }, + { 961 * OVERSAMPLENR, 32 }, + { 981 * OVERSAMPLENR, 23 }, + { 991 * OVERSAMPLENR, 17 }, + { 1001 * OVERSAMPLENR, 9 }, + { 1008 * OVERSAMPLENR, 0 } +}; diff --git a/Marlin/thermistortable_66.h b/Marlin/thermistortable_66.h new file mode 100644 index 0000000000..b23961d10f --- /dev/null +++ b/Marlin/thermistortable_66.h @@ -0,0 +1,52 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// DyzeDesign 500°C Thermistor +const short temptable_66[][2] PROGMEM = { + { 17.5 * OVERSAMPLENR, 850 }, + { 17.9 * OVERSAMPLENR, 500 }, + { 21.7 * OVERSAMPLENR, 480 }, + { 26.6 * OVERSAMPLENR, 460 }, + { 33.1 * OVERSAMPLENR, 440 }, + { 41.0 * OVERSAMPLENR, 420 }, + { 52.3 * OVERSAMPLENR, 400 }, + { 67.7 * OVERSAMPLENR, 380 }, + { 86.5 * OVERSAMPLENR, 360 }, + { 112.0 * OVERSAMPLENR, 340 }, + { 147.2 * OVERSAMPLENR, 320 }, + { 194.0 * OVERSAMPLENR, 300 }, + { 254.3 * OVERSAMPLENR, 280 }, + { 330.2 * OVERSAMPLENR, 260 }, + { 427.9 * OVERSAMPLENR, 240 }, + { 533.4 * OVERSAMPLENR, 220 }, + { 646.5 * OVERSAMPLENR, 200 }, + { 754.4 * OVERSAMPLENR, 180 }, + { 844.3 * OVERSAMPLENR, 160 }, + { 911.7 * OVERSAMPLENR, 140 }, + { 958.6 * OVERSAMPLENR, 120 }, + { 988.8 * OVERSAMPLENR, 100 }, + { 1006.6 * OVERSAMPLENR, 80 }, + { 1015.8 * OVERSAMPLENR, 60 }, + { 1021.3 * OVERSAMPLENR, 30 }, + { 1023 * OVERSAMPLENR - 1, 25}, + { 1023 * OVERSAMPLENR, 20} +}; diff --git a/Marlin/thermistortable_7.h b/Marlin/thermistortable_7.h new file mode 100644 index 0000000000..3b4f63b7a6 --- /dev/null +++ b/Marlin/thermistortable_7.h @@ -0,0 +1,83 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// 100k Honeywell 135-104LAG-J01 +const short temptable_7[][2] PROGMEM = { + { 1 * OVERSAMPLENR, 941 }, + { 19 * OVERSAMPLENR, 362 }, + { 37 * OVERSAMPLENR, 299 }, // top rating 300C + { 55 * OVERSAMPLENR, 266 }, + { 73 * OVERSAMPLENR, 245 }, + { 91 * OVERSAMPLENR, 229 }, + { 109 * OVERSAMPLENR, 216 }, + { 127 * OVERSAMPLENR, 206 }, + { 145 * OVERSAMPLENR, 197 }, + { 163 * OVERSAMPLENR, 190 }, + { 181 * OVERSAMPLENR, 183 }, + { 199 * OVERSAMPLENR, 177 }, + { 217 * OVERSAMPLENR, 171 }, + { 235 * OVERSAMPLENR, 166 }, + { 253 * OVERSAMPLENR, 162 }, + { 271 * OVERSAMPLENR, 157 }, + { 289 * OVERSAMPLENR, 153 }, + { 307 * OVERSAMPLENR, 149 }, + { 325 * OVERSAMPLENR, 146 }, + { 343 * OVERSAMPLENR, 142 }, + { 361 * OVERSAMPLENR, 139 }, + { 379 * OVERSAMPLENR, 135 }, + { 397 * OVERSAMPLENR, 132 }, + { 415 * OVERSAMPLENR, 129 }, + { 433 * OVERSAMPLENR, 126 }, + { 451 * OVERSAMPLENR, 123 }, + { 469 * OVERSAMPLENR, 121 }, + { 487 * OVERSAMPLENR, 118 }, + { 505 * OVERSAMPLENR, 115 }, + { 523 * OVERSAMPLENR, 112 }, + { 541 * OVERSAMPLENR, 110 }, + { 559 * OVERSAMPLENR, 107 }, + { 577 * OVERSAMPLENR, 105 }, + { 595 * OVERSAMPLENR, 102 }, + { 613 * OVERSAMPLENR, 99 }, + { 631 * OVERSAMPLENR, 97 }, + { 649 * OVERSAMPLENR, 94 }, + { 667 * OVERSAMPLENR, 92 }, + { 685 * OVERSAMPLENR, 89 }, + { 703 * OVERSAMPLENR, 86 }, + { 721 * OVERSAMPLENR, 84 }, + { 739 * OVERSAMPLENR, 81 }, + { 757 * OVERSAMPLENR, 78 }, + { 775 * OVERSAMPLENR, 75 }, + { 793 * OVERSAMPLENR, 72 }, + { 811 * OVERSAMPLENR, 69 }, + { 829 * OVERSAMPLENR, 66 }, + { 847 * OVERSAMPLENR, 62 }, + { 865 * OVERSAMPLENR, 59 }, + { 883 * OVERSAMPLENR, 55 }, + { 901 * OVERSAMPLENR, 51 }, + { 919 * OVERSAMPLENR, 46 }, + { 937 * OVERSAMPLENR, 41 }, + { 955 * OVERSAMPLENR, 35 }, + { 973 * OVERSAMPLENR, 27 }, + { 991 * OVERSAMPLENR, 17 }, + { 1009 * OVERSAMPLENR, 1 }, + { 1023 * OVERSAMPLENR, 0 } // to allow internal 0 degrees C +}; diff --git a/Marlin/thermistortable_70.h b/Marlin/thermistortable_70.h new file mode 100644 index 0000000000..70440590da --- /dev/null +++ b/Marlin/thermistortable_70.h @@ -0,0 +1,86 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// bqh2 stock thermistor +const short temptable_70[][2] PROGMEM = { + { 22 * OVERSAMPLENR, 300 }, + { 24 * OVERSAMPLENR, 295 }, + { 25 * OVERSAMPLENR, 290 }, + { 27 * OVERSAMPLENR, 285 }, + { 29 * OVERSAMPLENR, 280 }, + { 32 * OVERSAMPLENR, 275 }, + { 34 * OVERSAMPLENR, 270 }, + { 37 * OVERSAMPLENR, 265 }, + { 40 * OVERSAMPLENR, 260 }, + { 43 * OVERSAMPLENR, 255 }, + { 46 * OVERSAMPLENR, 250 }, + { 50 * OVERSAMPLENR, 245 }, + { 54 * OVERSAMPLENR, 240 }, + { 59 * OVERSAMPLENR, 235 }, + { 64 * OVERSAMPLENR, 230 }, + { 70 * OVERSAMPLENR, 225 }, + { 76 * OVERSAMPLENR, 220 }, + { 83 * OVERSAMPLENR, 215 }, + { 90 * OVERSAMPLENR, 210 }, + { 99 * OVERSAMPLENR, 205 }, + { 108 * OVERSAMPLENR, 200 }, + { 118 * OVERSAMPLENR, 195 }, + { 129 * OVERSAMPLENR, 190 }, + { 141 * OVERSAMPLENR, 185 }, + { 154 * OVERSAMPLENR, 180 }, + { 169 * OVERSAMPLENR, 175 }, + { 185 * OVERSAMPLENR, 170 }, + { 203 * OVERSAMPLENR, 165 }, + { 222 * OVERSAMPLENR, 160 }, + { 243 * OVERSAMPLENR, 155 }, + { 266 * OVERSAMPLENR, 150 }, + { 290 * OVERSAMPLENR, 145 }, + { 317 * OVERSAMPLENR, 140 }, + { 346 * OVERSAMPLENR, 135 }, + { 376 * OVERSAMPLENR, 130 }, + { 408 * OVERSAMPLENR, 125 }, + { 442 * OVERSAMPLENR, 120 }, + { 477 * OVERSAMPLENR, 115 }, + { 513 * OVERSAMPLENR, 110 }, + { 551 * OVERSAMPLENR, 105 }, + { 588 * OVERSAMPLENR, 100 }, + { 626 * OVERSAMPLENR, 95 }, + { 663 * OVERSAMPLENR, 90 }, + { 699 * OVERSAMPLENR, 85 }, + { 735 * OVERSAMPLENR, 80 }, + { 768 * OVERSAMPLENR, 75 }, + { 800 * OVERSAMPLENR, 70 }, + { 829 * OVERSAMPLENR, 65 }, + { 856 * OVERSAMPLENR, 60 }, + { 881 * OVERSAMPLENR, 55 }, + { 903 * OVERSAMPLENR, 50 }, + { 922 * OVERSAMPLENR, 45 }, + { 939 * OVERSAMPLENR, 40 }, + { 954 * OVERSAMPLENR, 35 }, + { 966 * OVERSAMPLENR, 30 }, + { 977 * OVERSAMPLENR, 25 }, + { 986 * OVERSAMPLENR, 20 }, + { 994 * OVERSAMPLENR, 15 }, + { 1000 * OVERSAMPLENR, 10 }, + { 1005 * OVERSAMPLENR, 5 }, + { 1009 * OVERSAMPLENR, 0 } // safety +}; diff --git a/Marlin/thermistortable_71.h b/Marlin/thermistortable_71.h new file mode 100644 index 0000000000..9d90e87bb4 --- /dev/null +++ b/Marlin/thermistortable_71.h @@ -0,0 +1,171 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// 100k Honeywell 135-104LAF-J01 +// R0 = 100000 Ohm +// T0 = 25 °C +// Beta = 3974 +// R1 = 0 Ohm +// R2 = 4700 Ohm +const short temptable_71[][2] PROGMEM = { + { 35 * OVERSAMPLENR, 300 }, + { 51 * OVERSAMPLENR, 270 }, + { 54 * OVERSAMPLENR, 265 }, + { 58 * OVERSAMPLENR, 260 }, + { 59 * OVERSAMPLENR, 258 }, + { 61 * OVERSAMPLENR, 256 }, + { 63 * OVERSAMPLENR, 254 }, + { 64 * OVERSAMPLENR, 252 }, + { 66 * OVERSAMPLENR, 250 }, + { 67 * OVERSAMPLENR, 249 }, + { 68 * OVERSAMPLENR, 248 }, + { 69 * OVERSAMPLENR, 247 }, + { 70 * OVERSAMPLENR, 246 }, + { 71 * OVERSAMPLENR, 245 }, + { 72 * OVERSAMPLENR, 244 }, + { 73 * OVERSAMPLENR, 243 }, + { 74 * OVERSAMPLENR, 242 }, + { 75 * OVERSAMPLENR, 241 }, + { 76 * OVERSAMPLENR, 240 }, + { 77 * OVERSAMPLENR, 239 }, + { 78 * OVERSAMPLENR, 238 }, + { 79 * OVERSAMPLENR, 237 }, + { 80 * OVERSAMPLENR, 236 }, + { 81 * OVERSAMPLENR, 235 }, + { 82 * OVERSAMPLENR, 234 }, + { 84 * OVERSAMPLENR, 233 }, + { 85 * OVERSAMPLENR, 232 }, + { 86 * OVERSAMPLENR, 231 }, + { 87 * OVERSAMPLENR, 230 }, + { 89 * OVERSAMPLENR, 229 }, + { 90 * OVERSAMPLENR, 228 }, + { 91 * OVERSAMPLENR, 227 }, + { 92 * OVERSAMPLENR, 226 }, + { 94 * OVERSAMPLENR, 225 }, + { 95 * OVERSAMPLENR, 224 }, + { 97 * OVERSAMPLENR, 223 }, + { 98 * OVERSAMPLENR, 222 }, + { 99 * OVERSAMPLENR, 221 }, + { 101 * OVERSAMPLENR, 220 }, + { 102 * OVERSAMPLENR, 219 }, + { 104 * OVERSAMPLENR, 218 }, + { 106 * OVERSAMPLENR, 217 }, + { 107 * OVERSAMPLENR, 216 }, + { 109 * OVERSAMPLENR, 215 }, + { 110 * OVERSAMPLENR, 214 }, + { 112 * OVERSAMPLENR, 213 }, + { 114 * OVERSAMPLENR, 212 }, + { 115 * OVERSAMPLENR, 211 }, + { 117 * OVERSAMPLENR, 210 }, + { 119 * OVERSAMPLENR, 209 }, + { 121 * OVERSAMPLENR, 208 }, + { 123 * OVERSAMPLENR, 207 }, + { 125 * OVERSAMPLENR, 206 }, + { 126 * OVERSAMPLENR, 205 }, + { 128 * OVERSAMPLENR, 204 }, + { 130 * OVERSAMPLENR, 203 }, + { 132 * OVERSAMPLENR, 202 }, + { 134 * OVERSAMPLENR, 201 }, + { 136 * OVERSAMPLENR, 200 }, + { 139 * OVERSAMPLENR, 199 }, + { 141 * OVERSAMPLENR, 198 }, + { 143 * OVERSAMPLENR, 197 }, + { 145 * OVERSAMPLENR, 196 }, + { 147 * OVERSAMPLENR, 195 }, + { 150 * OVERSAMPLENR, 194 }, + { 152 * OVERSAMPLENR, 193 }, + { 154 * OVERSAMPLENR, 192 }, + { 157 * OVERSAMPLENR, 191 }, + { 159 * OVERSAMPLENR, 190 }, + { 162 * OVERSAMPLENR, 189 }, + { 164 * OVERSAMPLENR, 188 }, + { 167 * OVERSAMPLENR, 187 }, + { 170 * OVERSAMPLENR, 186 }, + { 172 * OVERSAMPLENR, 185 }, + { 175 * OVERSAMPLENR, 184 }, + { 178 * OVERSAMPLENR, 183 }, + { 181 * OVERSAMPLENR, 182 }, + { 184 * OVERSAMPLENR, 181 }, + { 187 * OVERSAMPLENR, 180 }, + { 190 * OVERSAMPLENR, 179 }, + { 193 * OVERSAMPLENR, 178 }, + { 196 * OVERSAMPLENR, 177 }, + { 199 * OVERSAMPLENR, 176 }, + { 202 * OVERSAMPLENR, 175 }, + { 205 * OVERSAMPLENR, 174 }, + { 208 * OVERSAMPLENR, 173 }, + { 212 * OVERSAMPLENR, 172 }, + { 215 * OVERSAMPLENR, 171 }, + { 219 * OVERSAMPLENR, 170 }, + { 237 * OVERSAMPLENR, 165 }, + { 256 * OVERSAMPLENR, 160 }, + { 300 * OVERSAMPLENR, 150 }, + { 351 * OVERSAMPLENR, 140 }, + { 470 * OVERSAMPLENR, 120 }, + { 504 * OVERSAMPLENR, 115 }, + { 538 * OVERSAMPLENR, 110 }, + { 552 * OVERSAMPLENR, 108 }, + { 566 * OVERSAMPLENR, 106 }, + { 580 * OVERSAMPLENR, 104 }, + { 594 * OVERSAMPLENR, 102 }, + { 608 * OVERSAMPLENR, 100 }, + { 622 * OVERSAMPLENR, 98 }, + { 636 * OVERSAMPLENR, 96 }, + { 650 * OVERSAMPLENR, 94 }, + { 664 * OVERSAMPLENR, 92 }, + { 678 * OVERSAMPLENR, 90 }, + { 712 * OVERSAMPLENR, 85 }, + { 745 * OVERSAMPLENR, 80 }, + { 758 * OVERSAMPLENR, 78 }, + { 770 * OVERSAMPLENR, 76 }, + { 783 * OVERSAMPLENR, 74 }, + { 795 * OVERSAMPLENR, 72 }, + { 806 * OVERSAMPLENR, 70 }, + { 818 * OVERSAMPLENR, 68 }, + { 829 * OVERSAMPLENR, 66 }, + { 840 * OVERSAMPLENR, 64 }, + { 850 * OVERSAMPLENR, 62 }, + { 860 * OVERSAMPLENR, 60 }, + { 870 * OVERSAMPLENR, 58 }, + { 879 * OVERSAMPLENR, 56 }, + { 888 * OVERSAMPLENR, 54 }, + { 897 * OVERSAMPLENR, 52 }, + { 905 * OVERSAMPLENR, 50 }, + { 924 * OVERSAMPLENR, 45 }, + { 940 * OVERSAMPLENR, 40 }, + { 955 * OVERSAMPLENR, 35 }, + { 967 * OVERSAMPLENR, 30 }, + { 970 * OVERSAMPLENR, 29 }, + { 972 * OVERSAMPLENR, 28 }, + { 974 * OVERSAMPLENR, 27 }, + { 976 * OVERSAMPLENR, 26 }, + { 978 * OVERSAMPLENR, 25 }, + { 980 * OVERSAMPLENR, 24 }, + { 982 * OVERSAMPLENR, 23 }, + { 984 * OVERSAMPLENR, 22 }, + { 985 * OVERSAMPLENR, 21 }, + { 987 * OVERSAMPLENR, 20 }, + { 995 * OVERSAMPLENR, 15 }, + { 1001 * OVERSAMPLENR, 10 }, + { 1006 * OVERSAMPLENR, 5 }, + { 1010 * OVERSAMPLENR, 0 } +}; diff --git a/Marlin/thermistortable_8.h b/Marlin/thermistortable_8.h new file mode 100644 index 0000000000..f1892bf8dd --- /dev/null +++ b/Marlin/thermistortable_8.h @@ -0,0 +1,45 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) +const short temptable_8[][2] PROGMEM = { + { 1 * OVERSAMPLENR, 704 }, + { 54 * OVERSAMPLENR, 216 }, + { 107 * OVERSAMPLENR, 175 }, + { 160 * OVERSAMPLENR, 152 }, + { 213 * OVERSAMPLENR, 137 }, + { 266 * OVERSAMPLENR, 125 }, + { 319 * OVERSAMPLENR, 115 }, + { 372 * OVERSAMPLENR, 106 }, + { 425 * OVERSAMPLENR, 99 }, + { 478 * OVERSAMPLENR, 91 }, + { 531 * OVERSAMPLENR, 85 }, + { 584 * OVERSAMPLENR, 78 }, + { 637 * OVERSAMPLENR, 71 }, + { 690 * OVERSAMPLENR, 65 }, + { 743 * OVERSAMPLENR, 58 }, + { 796 * OVERSAMPLENR, 50 }, + { 849 * OVERSAMPLENR, 42 }, + { 902 * OVERSAMPLENR, 31 }, + { 955 * OVERSAMPLENR, 17 }, + { 1008 * OVERSAMPLENR, 0 } +}; diff --git a/Marlin/thermistortable_9.h b/Marlin/thermistortable_9.h new file mode 100644 index 0000000000..e3b0e7b464 --- /dev/null +++ b/Marlin/thermistortable_9.h @@ -0,0 +1,56 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) +const short temptable_9[][2] PROGMEM = { + { 1 * OVERSAMPLENR, 936 }, + { 36 * OVERSAMPLENR, 300 }, + { 71 * OVERSAMPLENR, 246 }, + { 106 * OVERSAMPLENR, 218 }, + { 141 * OVERSAMPLENR, 199 }, + { 176 * OVERSAMPLENR, 185 }, + { 211 * OVERSAMPLENR, 173 }, + { 246 * OVERSAMPLENR, 163 }, + { 281 * OVERSAMPLENR, 155 }, + { 316 * OVERSAMPLENR, 147 }, + { 351 * OVERSAMPLENR, 140 }, + { 386 * OVERSAMPLENR, 134 }, + { 421 * OVERSAMPLENR, 128 }, + { 456 * OVERSAMPLENR, 122 }, + { 491 * OVERSAMPLENR, 117 }, + { 526 * OVERSAMPLENR, 112 }, + { 561 * OVERSAMPLENR, 107 }, + { 596 * OVERSAMPLENR, 102 }, + { 631 * OVERSAMPLENR, 97 }, + { 666 * OVERSAMPLENR, 92 }, + { 701 * OVERSAMPLENR, 87 }, + { 736 * OVERSAMPLENR, 81 }, + { 771 * OVERSAMPLENR, 76 }, + { 806 * OVERSAMPLENR, 70 }, + { 841 * OVERSAMPLENR, 63 }, + { 876 * OVERSAMPLENR, 56 }, + { 911 * OVERSAMPLENR, 48 }, + { 946 * OVERSAMPLENR, 38 }, + { 981 * OVERSAMPLENR, 23 }, + { 1005 * OVERSAMPLENR, 5 }, + { 1016 * OVERSAMPLENR, 0 } +}; diff --git a/Marlin/thermistortable_998.h b/Marlin/thermistortable_998.h new file mode 100644 index 0000000000..0e0be8c428 --- /dev/null +++ b/Marlin/thermistortable_998.h @@ -0,0 +1,32 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// User-defined table 1 +// Dummy Thermistor table.. It will ALWAYS read a fixed value. +#ifndef DUMMY_THERMISTOR_998_VALUE + #define DUMMY_THERMISTOR_998_VALUE 25 +#endif + +const short temptable_998[][2] PROGMEM = { + { 1 * OVERSAMPLENR, DUMMY_THERMISTOR_998_VALUE }, + { 1023 * OVERSAMPLENR, DUMMY_THERMISTOR_998_VALUE } +}; diff --git a/Marlin/thermistortable_999.h b/Marlin/thermistortable_999.h new file mode 100644 index 0000000000..d98018bc4b --- /dev/null +++ b/Marlin/thermistortable_999.h @@ -0,0 +1,32 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +// User-defined table 2 +// Dummy Thermistor table.. It will ALWAYS read a fixed value. +#ifndef DUMMY_THERMISTOR_999_VALUE + #define DUMMY_THERMISTOR_999_VALUE 25 +#endif + +const short temptable_999[][2] PROGMEM = { + { 1 * OVERSAMPLENR, DUMMY_THERMISTOR_999_VALUE }, + { 1023 * OVERSAMPLENR, DUMMY_THERMISTOR_999_VALUE } +}; diff --git a/Marlin/thermistortables.h b/Marlin/thermistortables.h index fee443a736..36e5fe93bd 100644 --- a/Marlin/thermistortables.h +++ b/Marlin/thermistortables.h @@ -30,1277 +30,139 @@ #define ANY_THERMISTOR_IS(n) (THERMISTORHEATER_0 == n || THERMISTORHEATER_1 == n || THERMISTORHEATER_2 == n || THERMISTORHEATER_3 == n || THERMISTORBED == n) -#if ANY_THERMISTOR_IS(1) // 100k bed thermistor -const short temptable_1[][2] PROGMEM = { - { 23 * OVERSAMPLENR, 300 }, - { 25 * OVERSAMPLENR, 295 }, - { 27 * OVERSAMPLENR, 290 }, - { 28 * OVERSAMPLENR, 285 }, - { 31 * OVERSAMPLENR, 280 }, - { 33 * OVERSAMPLENR, 275 }, - { 35 * OVERSAMPLENR, 270 }, - { 38 * OVERSAMPLENR, 265 }, - { 41 * OVERSAMPLENR, 260 }, - { 44 * OVERSAMPLENR, 255 }, - { 48 * OVERSAMPLENR, 250 }, - { 52 * OVERSAMPLENR, 245 }, - { 56 * OVERSAMPLENR, 240 }, - { 61 * OVERSAMPLENR, 235 }, - { 66 * OVERSAMPLENR, 230 }, - { 71 * OVERSAMPLENR, 225 }, - { 78 * OVERSAMPLENR, 220 }, - { 84 * OVERSAMPLENR, 215 }, - { 92 * OVERSAMPLENR, 210 }, - { 100 * OVERSAMPLENR, 205 }, - { 109 * OVERSAMPLENR, 200 }, - { 120 * OVERSAMPLENR, 195 }, - { 131 * OVERSAMPLENR, 190 }, - { 143 * OVERSAMPLENR, 185 }, - { 156 * OVERSAMPLENR, 180 }, - { 171 * OVERSAMPLENR, 175 }, - { 187 * OVERSAMPLENR, 170 }, - { 205 * OVERSAMPLENR, 165 }, - { 224 * OVERSAMPLENR, 160 }, - { 245 * OVERSAMPLENR, 155 }, - { 268 * OVERSAMPLENR, 150 }, - { 293 * OVERSAMPLENR, 145 }, - { 320 * OVERSAMPLENR, 140 }, - { 348 * OVERSAMPLENR, 135 }, - { 379 * OVERSAMPLENR, 130 }, - { 411 * OVERSAMPLENR, 125 }, - { 445 * OVERSAMPLENR, 120 }, - { 480 * OVERSAMPLENR, 115 }, - { 516 * OVERSAMPLENR, 110 }, - { 553 * OVERSAMPLENR, 105 }, - { 591 * OVERSAMPLENR, 100 }, - { 628 * OVERSAMPLENR, 95 }, - { 665 * OVERSAMPLENR, 90 }, - { 702 * OVERSAMPLENR, 85 }, - { 737 * OVERSAMPLENR, 80 }, - { 770 * OVERSAMPLENR, 75 }, - { 801 * OVERSAMPLENR, 70 }, - { 830 * OVERSAMPLENR, 65 }, - { 857 * OVERSAMPLENR, 60 }, - { 881 * OVERSAMPLENR, 55 }, - { 903 * OVERSAMPLENR, 50 }, - { 922 * OVERSAMPLENR, 45 }, - { 939 * OVERSAMPLENR, 40 }, - { 954 * OVERSAMPLENR, 35 }, - { 966 * OVERSAMPLENR, 30 }, - { 977 * OVERSAMPLENR, 25 }, - { 985 * OVERSAMPLENR, 20 }, - { 993 * OVERSAMPLENR, 15 }, - { 999 * OVERSAMPLENR, 10 }, - { 1004 * OVERSAMPLENR, 5 }, - { 1008 * OVERSAMPLENR, 0 }, - { 1012 * OVERSAMPLENR, -5 }, - { 1016 * OVERSAMPLENR, -10 }, - { 1020 * OVERSAMPLENR, -15 } -}; -#endif - -#if ANY_THERMISTOR_IS(2) // 200k bed thermistor -// 200k ATC Semitec 204GT-2 -// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf -// Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance -const short temptable_2[][2] PROGMEM = { - { 1 * OVERSAMPLENR, 848 }, - { 30 * OVERSAMPLENR, 300 }, // top rating 300C - { 34 * OVERSAMPLENR, 290 }, - { 39 * OVERSAMPLENR, 280 }, - { 46 * OVERSAMPLENR, 270 }, - { 53 * OVERSAMPLENR, 260 }, - { 63 * OVERSAMPLENR, 250 }, - { 74 * OVERSAMPLENR, 240 }, - { 87 * OVERSAMPLENR, 230 }, - { 104 * OVERSAMPLENR, 220 }, - { 124 * OVERSAMPLENR, 210 }, - { 148 * OVERSAMPLENR, 200 }, - { 176 * OVERSAMPLENR, 190 }, - { 211 * OVERSAMPLENR, 180 }, - { 252 * OVERSAMPLENR, 170 }, - { 301 * OVERSAMPLENR, 160 }, - { 357 * OVERSAMPLENR, 150 }, - { 420 * OVERSAMPLENR, 140 }, - { 489 * OVERSAMPLENR, 130 }, - { 562 * OVERSAMPLENR, 120 }, - { 636 * OVERSAMPLENR, 110 }, - { 708 * OVERSAMPLENR, 100 }, - { 775 * OVERSAMPLENR, 90 }, - { 835 * OVERSAMPLENR, 80 }, - { 884 * OVERSAMPLENR, 70 }, - { 924 * OVERSAMPLENR, 60 }, - { 955 * OVERSAMPLENR, 50 }, - { 977 * OVERSAMPLENR, 40 }, - { 993 * OVERSAMPLENR, 30 }, - { 1004 * OVERSAMPLENR, 20 }, - { 1012 * OVERSAMPLENR, 10 }, - { 1016 * OVERSAMPLENR, 0 } -}; -#endif - -#if ANY_THERMISTOR_IS(3) // mendel-parts -const short temptable_3[][2] PROGMEM = { - { 1 * OVERSAMPLENR, 864 }, - { 21 * OVERSAMPLENR, 300 }, - { 25 * OVERSAMPLENR, 290 }, - { 29 * OVERSAMPLENR, 280 }, - { 33 * OVERSAMPLENR, 270 }, - { 39 * OVERSAMPLENR, 260 }, - { 46 * OVERSAMPLENR, 250 }, - { 54 * OVERSAMPLENR, 240 }, - { 64 * OVERSAMPLENR, 230 }, - { 75 * OVERSAMPLENR, 220 }, - { 90 * OVERSAMPLENR, 210 }, - { 107 * OVERSAMPLENR, 200 }, - { 128 * OVERSAMPLENR, 190 }, - { 154 * OVERSAMPLENR, 180 }, - { 184 * OVERSAMPLENR, 170 }, - { 221 * OVERSAMPLENR, 160 }, - { 265 * OVERSAMPLENR, 150 }, - { 316 * OVERSAMPLENR, 140 }, - { 375 * OVERSAMPLENR, 130 }, - { 441 * OVERSAMPLENR, 120 }, - { 513 * OVERSAMPLENR, 110 }, - { 588 * OVERSAMPLENR, 100 }, - { 734 * OVERSAMPLENR, 80 }, - { 856 * OVERSAMPLENR, 60 }, - { 938 * OVERSAMPLENR, 40 }, - { 986 * OVERSAMPLENR, 20 }, - { 1008 * OVERSAMPLENR, 0 }, - { 1018 * OVERSAMPLENR, -20 } -}; -#endif - -#if ANY_THERMISTOR_IS(4) // 10k thermistor -const short temptable_4[][2] PROGMEM = { - { 1 * OVERSAMPLENR, 430 }, - { 54 * OVERSAMPLENR, 137 }, - { 107 * OVERSAMPLENR, 107 }, - { 160 * OVERSAMPLENR, 91 }, - { 213 * OVERSAMPLENR, 80 }, - { 266 * OVERSAMPLENR, 71 }, - { 319 * OVERSAMPLENR, 64 }, - { 372 * OVERSAMPLENR, 57 }, - { 425 * OVERSAMPLENR, 51 }, - { 478 * OVERSAMPLENR, 46 }, - { 531 * OVERSAMPLENR, 41 }, - { 584 * OVERSAMPLENR, 35 }, - { 637 * OVERSAMPLENR, 30 }, - { 690 * OVERSAMPLENR, 25 }, - { 743 * OVERSAMPLENR, 20 }, - { 796 * OVERSAMPLENR, 14 }, - { 849 * OVERSAMPLENR, 7 }, - { 902 * OVERSAMPLENR, 0 }, - { 955 * OVERSAMPLENR, -11 }, - { 1008 * OVERSAMPLENR, -35 } -}; -#endif - -#if ANY_THERMISTOR_IS(5) // 100k ParCan thermistor (104GT-2) -// ATC Semitec 104GT-2 (Used in ParCan) -// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf -// Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance -const short temptable_5[][2] PROGMEM = { - { 1 * OVERSAMPLENR, 713 }, - { 17 * OVERSAMPLENR, 300 }, // top rating 300C - { 20 * OVERSAMPLENR, 290 }, - { 23 * OVERSAMPLENR, 280 }, - { 27 * OVERSAMPLENR, 270 }, - { 31 * OVERSAMPLENR, 260 }, - { 37 * OVERSAMPLENR, 250 }, - { 43 * OVERSAMPLENR, 240 }, - { 51 * OVERSAMPLENR, 230 }, - { 61 * OVERSAMPLENR, 220 }, - { 73 * OVERSAMPLENR, 210 }, - { 87 * OVERSAMPLENR, 200 }, - { 106 * OVERSAMPLENR, 190 }, - { 128 * OVERSAMPLENR, 180 }, - { 155 * OVERSAMPLENR, 170 }, - { 189 * OVERSAMPLENR, 160 }, - { 230 * OVERSAMPLENR, 150 }, - { 278 * OVERSAMPLENR, 140 }, - { 336 * OVERSAMPLENR, 130 }, - { 402 * OVERSAMPLENR, 120 }, - { 476 * OVERSAMPLENR, 110 }, - { 554 * OVERSAMPLENR, 100 }, - { 635 * OVERSAMPLENR, 90 }, - { 713 * OVERSAMPLENR, 80 }, - { 784 * OVERSAMPLENR, 70 }, - { 846 * OVERSAMPLENR, 60 }, - { 897 * OVERSAMPLENR, 50 }, - { 937 * OVERSAMPLENR, 40 }, - { 966 * OVERSAMPLENR, 30 }, - { 986 * OVERSAMPLENR, 20 }, - { 1000 * OVERSAMPLENR, 10 }, - { 1010 * OVERSAMPLENR, 0 } -}; -#endif - -#if ANY_THERMISTOR_IS(6) // 100k Epcos thermistor -const short temptable_6[][2] PROGMEM = { - { 1 * OVERSAMPLENR, 350 }, - { 28 * OVERSAMPLENR, 250 }, // top rating 250C - { 31 * OVERSAMPLENR, 245 }, - { 35 * OVERSAMPLENR, 240 }, - { 39 * OVERSAMPLENR, 235 }, - { 42 * OVERSAMPLENR, 230 }, - { 44 * OVERSAMPLENR, 225 }, - { 49 * OVERSAMPLENR, 220 }, - { 53 * OVERSAMPLENR, 215 }, - { 62 * OVERSAMPLENR, 210 }, - { 71 * OVERSAMPLENR, 205 }, // fitted graphically - { 78 * OVERSAMPLENR, 200 }, // fitted graphically - { 94 * OVERSAMPLENR, 190 }, - { 102 * OVERSAMPLENR, 185 }, - { 116 * OVERSAMPLENR, 170 }, - { 143 * OVERSAMPLENR, 160 }, - { 183 * OVERSAMPLENR, 150 }, - { 223 * OVERSAMPLENR, 140 }, - { 270 * OVERSAMPLENR, 130 }, - { 318 * OVERSAMPLENR, 120 }, - { 383 * OVERSAMPLENR, 110 }, - { 413 * OVERSAMPLENR, 105 }, - { 439 * OVERSAMPLENR, 100 }, - { 484 * OVERSAMPLENR, 95 }, - { 513 * OVERSAMPLENR, 90 }, - { 607 * OVERSAMPLENR, 80 }, - { 664 * OVERSAMPLENR, 70 }, - { 781 * OVERSAMPLENR, 60 }, - { 810 * OVERSAMPLENR, 55 }, - { 849 * OVERSAMPLENR, 50 }, - { 914 * OVERSAMPLENR, 45 }, - { 914 * OVERSAMPLENR, 40 }, - { 935 * OVERSAMPLENR, 35 }, - { 954 * OVERSAMPLENR, 30 }, - { 970 * OVERSAMPLENR, 25 }, - { 978 * OVERSAMPLENR, 22 }, - { 1008 * OVERSAMPLENR, 3 }, - { 1023 * OVERSAMPLENR, 0 } // to allow internal 0 degrees C -}; -#endif - -#if ANY_THERMISTOR_IS(7) // 100k Honeywell 135-104LAG-J01 -const short temptable_7[][2] PROGMEM = { - { 1 * OVERSAMPLENR, 941 }, - { 19 * OVERSAMPLENR, 362 }, - { 37 * OVERSAMPLENR, 299 }, // top rating 300C - { 55 * OVERSAMPLENR, 266 }, - { 73 * OVERSAMPLENR, 245 }, - { 91 * OVERSAMPLENR, 229 }, - { 109 * OVERSAMPLENR, 216 }, - { 127 * OVERSAMPLENR, 206 }, - { 145 * OVERSAMPLENR, 197 }, - { 163 * OVERSAMPLENR, 190 }, - { 181 * OVERSAMPLENR, 183 }, - { 199 * OVERSAMPLENR, 177 }, - { 217 * OVERSAMPLENR, 171 }, - { 235 * OVERSAMPLENR, 166 }, - { 253 * OVERSAMPLENR, 162 }, - { 271 * OVERSAMPLENR, 157 }, - { 289 * OVERSAMPLENR, 153 }, - { 307 * OVERSAMPLENR, 149 }, - { 325 * OVERSAMPLENR, 146 }, - { 343 * OVERSAMPLENR, 142 }, - { 361 * OVERSAMPLENR, 139 }, - { 379 * OVERSAMPLENR, 135 }, - { 397 * OVERSAMPLENR, 132 }, - { 415 * OVERSAMPLENR, 129 }, - { 433 * OVERSAMPLENR, 126 }, - { 451 * OVERSAMPLENR, 123 }, - { 469 * OVERSAMPLENR, 121 }, - { 487 * OVERSAMPLENR, 118 }, - { 505 * OVERSAMPLENR, 115 }, - { 523 * OVERSAMPLENR, 112 }, - { 541 * OVERSAMPLENR, 110 }, - { 559 * OVERSAMPLENR, 107 }, - { 577 * OVERSAMPLENR, 105 }, - { 595 * OVERSAMPLENR, 102 }, - { 613 * OVERSAMPLENR, 99 }, - { 631 * OVERSAMPLENR, 97 }, - { 649 * OVERSAMPLENR, 94 }, - { 667 * OVERSAMPLENR, 92 }, - { 685 * OVERSAMPLENR, 89 }, - { 703 * OVERSAMPLENR, 86 }, - { 721 * OVERSAMPLENR, 84 }, - { 739 * OVERSAMPLENR, 81 }, - { 757 * OVERSAMPLENR, 78 }, - { 775 * OVERSAMPLENR, 75 }, - { 793 * OVERSAMPLENR, 72 }, - { 811 * OVERSAMPLENR, 69 }, - { 829 * OVERSAMPLENR, 66 }, - { 847 * OVERSAMPLENR, 62 }, - { 865 * OVERSAMPLENR, 59 }, - { 883 * OVERSAMPLENR, 55 }, - { 901 * OVERSAMPLENR, 51 }, - { 919 * OVERSAMPLENR, 46 }, - { 937 * OVERSAMPLENR, 41 }, - { 955 * OVERSAMPLENR, 35 }, - { 973 * OVERSAMPLENR, 27 }, - { 991 * OVERSAMPLENR, 17 }, - { 1009 * OVERSAMPLENR, 1 }, - { 1023 * OVERSAMPLENR, 0 } // to allow internal 0 degrees C -}; -#endif - -#if ANY_THERMISTOR_IS(71) // 100k Honeywell 135-104LAF-J01 -// R0 = 100000 Ohm -// T0 = 25 °C -// Beta = 3974 -// R1 = 0 Ohm -// R2 = 4700 Ohm -const short temptable_71[][2] PROGMEM = { - { 35 * OVERSAMPLENR, 300 }, - { 51 * OVERSAMPLENR, 270 }, - { 54 * OVERSAMPLENR, 265 }, - { 58 * OVERSAMPLENR, 260 }, - { 59 * OVERSAMPLENR, 258 }, - { 61 * OVERSAMPLENR, 256 }, - { 63 * OVERSAMPLENR, 254 }, - { 64 * OVERSAMPLENR, 252 }, - { 66 * OVERSAMPLENR, 250 }, - { 67 * OVERSAMPLENR, 249 }, - { 68 * OVERSAMPLENR, 248 }, - { 69 * OVERSAMPLENR, 247 }, - { 70 * OVERSAMPLENR, 246 }, - { 71 * OVERSAMPLENR, 245 }, - { 72 * OVERSAMPLENR, 244 }, - { 73 * OVERSAMPLENR, 243 }, - { 74 * OVERSAMPLENR, 242 }, - { 75 * OVERSAMPLENR, 241 }, - { 76 * OVERSAMPLENR, 240 }, - { 77 * OVERSAMPLENR, 239 }, - { 78 * OVERSAMPLENR, 238 }, - { 79 * OVERSAMPLENR, 237 }, - { 80 * OVERSAMPLENR, 236 }, - { 81 * OVERSAMPLENR, 235 }, - { 82 * OVERSAMPLENR, 234 }, - { 84 * OVERSAMPLENR, 233 }, - { 85 * OVERSAMPLENR, 232 }, - { 86 * OVERSAMPLENR, 231 }, - { 87 * OVERSAMPLENR, 230 }, - { 89 * OVERSAMPLENR, 229 }, - { 90 * OVERSAMPLENR, 228 }, - { 91 * OVERSAMPLENR, 227 }, - { 92 * OVERSAMPLENR, 226 }, - { 94 * OVERSAMPLENR, 225 }, - { 95 * OVERSAMPLENR, 224 }, - { 97 * OVERSAMPLENR, 223 }, - { 98 * OVERSAMPLENR, 222 }, - { 99 * OVERSAMPLENR, 221 }, - { 101 * OVERSAMPLENR, 220 }, - { 102 * OVERSAMPLENR, 219 }, - { 104 * OVERSAMPLENR, 218 }, - { 106 * OVERSAMPLENR, 217 }, - { 107 * OVERSAMPLENR, 216 }, - { 109 * OVERSAMPLENR, 215 }, - { 110 * OVERSAMPLENR, 214 }, - { 112 * OVERSAMPLENR, 213 }, - { 114 * OVERSAMPLENR, 212 }, - { 115 * OVERSAMPLENR, 211 }, - { 117 * OVERSAMPLENR, 210 }, - { 119 * OVERSAMPLENR, 209 }, - { 121 * OVERSAMPLENR, 208 }, - { 123 * OVERSAMPLENR, 207 }, - { 125 * OVERSAMPLENR, 206 }, - { 126 * OVERSAMPLENR, 205 }, - { 128 * OVERSAMPLENR, 204 }, - { 130 * OVERSAMPLENR, 203 }, - { 132 * OVERSAMPLENR, 202 }, - { 134 * OVERSAMPLENR, 201 }, - { 136 * OVERSAMPLENR, 200 }, - { 139 * OVERSAMPLENR, 199 }, - { 141 * OVERSAMPLENR, 198 }, - { 143 * OVERSAMPLENR, 197 }, - { 145 * OVERSAMPLENR, 196 }, - { 147 * OVERSAMPLENR, 195 }, - { 150 * OVERSAMPLENR, 194 }, - { 152 * OVERSAMPLENR, 193 }, - { 154 * OVERSAMPLENR, 192 }, - { 157 * OVERSAMPLENR, 191 }, - { 159 * OVERSAMPLENR, 190 }, - { 162 * OVERSAMPLENR, 189 }, - { 164 * OVERSAMPLENR, 188 }, - { 167 * OVERSAMPLENR, 187 }, - { 170 * OVERSAMPLENR, 186 }, - { 172 * OVERSAMPLENR, 185 }, - { 175 * OVERSAMPLENR, 184 }, - { 178 * OVERSAMPLENR, 183 }, - { 181 * OVERSAMPLENR, 182 }, - { 184 * OVERSAMPLENR, 181 }, - { 187 * OVERSAMPLENR, 180 }, - { 190 * OVERSAMPLENR, 179 }, - { 193 * OVERSAMPLENR, 178 }, - { 196 * OVERSAMPLENR, 177 }, - { 199 * OVERSAMPLENR, 176 }, - { 202 * OVERSAMPLENR, 175 }, - { 205 * OVERSAMPLENR, 174 }, - { 208 * OVERSAMPLENR, 173 }, - { 212 * OVERSAMPLENR, 172 }, - { 215 * OVERSAMPLENR, 171 }, - { 219 * OVERSAMPLENR, 170 }, - { 237 * OVERSAMPLENR, 165 }, - { 256 * OVERSAMPLENR, 160 }, - { 300 * OVERSAMPLENR, 150 }, - { 351 * OVERSAMPLENR, 140 }, - { 470 * OVERSAMPLENR, 120 }, - { 504 * OVERSAMPLENR, 115 }, - { 538 * OVERSAMPLENR, 110 }, - { 552 * OVERSAMPLENR, 108 }, - { 566 * OVERSAMPLENR, 106 }, - { 580 * OVERSAMPLENR, 104 }, - { 594 * OVERSAMPLENR, 102 }, - { 608 * OVERSAMPLENR, 100 }, - { 622 * OVERSAMPLENR, 98 }, - { 636 * OVERSAMPLENR, 96 }, - { 650 * OVERSAMPLENR, 94 }, - { 664 * OVERSAMPLENR, 92 }, - { 678 * OVERSAMPLENR, 90 }, - { 712 * OVERSAMPLENR, 85 }, - { 745 * OVERSAMPLENR, 80 }, - { 758 * OVERSAMPLENR, 78 }, - { 770 * OVERSAMPLENR, 76 }, - { 783 * OVERSAMPLENR, 74 }, - { 795 * OVERSAMPLENR, 72 }, - { 806 * OVERSAMPLENR, 70 }, - { 818 * OVERSAMPLENR, 68 }, - { 829 * OVERSAMPLENR, 66 }, - { 840 * OVERSAMPLENR, 64 }, - { 850 * OVERSAMPLENR, 62 }, - { 860 * OVERSAMPLENR, 60 }, - { 870 * OVERSAMPLENR, 58 }, - { 879 * OVERSAMPLENR, 56 }, - { 888 * OVERSAMPLENR, 54 }, - { 897 * OVERSAMPLENR, 52 }, - { 905 * OVERSAMPLENR, 50 }, - { 924 * OVERSAMPLENR, 45 }, - { 940 * OVERSAMPLENR, 40 }, - { 955 * OVERSAMPLENR, 35 }, - { 967 * OVERSAMPLENR, 30 }, - { 970 * OVERSAMPLENR, 29 }, - { 972 * OVERSAMPLENR, 28 }, - { 974 * OVERSAMPLENR, 27 }, - { 976 * OVERSAMPLENR, 26 }, - { 978 * OVERSAMPLENR, 25 }, - { 980 * OVERSAMPLENR, 24 }, - { 982 * OVERSAMPLENR, 23 }, - { 984 * OVERSAMPLENR, 22 }, - { 985 * OVERSAMPLENR, 21 }, - { 987 * OVERSAMPLENR, 20 }, - { 995 * OVERSAMPLENR, 15 }, - { 1001 * OVERSAMPLENR, 10 }, - { 1006 * OVERSAMPLENR, 5 }, - { 1010 * OVERSAMPLENR, 0 } -}; -#endif - -#if ANY_THERMISTOR_IS(8) -// 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) -const short temptable_8[][2] PROGMEM = { - { 1 * OVERSAMPLENR, 704 }, - { 54 * OVERSAMPLENR, 216 }, - { 107 * OVERSAMPLENR, 175 }, - { 160 * OVERSAMPLENR, 152 }, - { 213 * OVERSAMPLENR, 137 }, - { 266 * OVERSAMPLENR, 125 }, - { 319 * OVERSAMPLENR, 115 }, - { 372 * OVERSAMPLENR, 106 }, - { 425 * OVERSAMPLENR, 99 }, - { 478 * OVERSAMPLENR, 91 }, - { 531 * OVERSAMPLENR, 85 }, - { 584 * OVERSAMPLENR, 78 }, - { 637 * OVERSAMPLENR, 71 }, - { 690 * OVERSAMPLENR, 65 }, - { 743 * OVERSAMPLENR, 58 }, - { 796 * OVERSAMPLENR, 50 }, - { 849 * OVERSAMPLENR, 42 }, - { 902 * OVERSAMPLENR, 31 }, - { 955 * OVERSAMPLENR, 17 }, - { 1008 * OVERSAMPLENR, 0 } -}; -#endif - -#if ANY_THERMISTOR_IS(9) -// 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) -const short temptable_9[][2] PROGMEM = { - { 1 * OVERSAMPLENR, 936 }, - { 36 * OVERSAMPLENR, 300 }, - { 71 * OVERSAMPLENR, 246 }, - { 106 * OVERSAMPLENR, 218 }, - { 141 * OVERSAMPLENR, 199 }, - { 176 * OVERSAMPLENR, 185 }, - { 211 * OVERSAMPLENR, 173 }, - { 246 * OVERSAMPLENR, 163 }, - { 281 * OVERSAMPLENR, 155 }, - { 316 * OVERSAMPLENR, 147 }, - { 351 * OVERSAMPLENR, 140 }, - { 386 * OVERSAMPLENR, 134 }, - { 421 * OVERSAMPLENR, 128 }, - { 456 * OVERSAMPLENR, 122 }, - { 491 * OVERSAMPLENR, 117 }, - { 526 * OVERSAMPLENR, 112 }, - { 561 * OVERSAMPLENR, 107 }, - { 596 * OVERSAMPLENR, 102 }, - { 631 * OVERSAMPLENR, 97 }, - { 666 * OVERSAMPLENR, 92 }, - { 701 * OVERSAMPLENR, 87 }, - { 736 * OVERSAMPLENR, 81 }, - { 771 * OVERSAMPLENR, 76 }, - { 806 * OVERSAMPLENR, 70 }, - { 841 * OVERSAMPLENR, 63 }, - { 876 * OVERSAMPLENR, 56 }, - { 911 * OVERSAMPLENR, 48 }, - { 946 * OVERSAMPLENR, 38 }, - { 981 * OVERSAMPLENR, 23 }, - { 1005 * OVERSAMPLENR, 5 }, - { 1016 * OVERSAMPLENR, 0 } -}; -#endif - -#if ANY_THERMISTOR_IS(10) -// 100k RS thermistor 198-961 (4.7k pullup) -const short temptable_10[][2] PROGMEM = { - { 1 * OVERSAMPLENR, 929 }, - { 36 * OVERSAMPLENR, 299 }, - { 71 * OVERSAMPLENR, 246 }, - { 106 * OVERSAMPLENR, 217 }, - { 141 * OVERSAMPLENR, 198 }, - { 176 * OVERSAMPLENR, 184 }, - { 211 * OVERSAMPLENR, 173 }, - { 246 * OVERSAMPLENR, 163 }, - { 281 * OVERSAMPLENR, 154 }, - { 316 * OVERSAMPLENR, 147 }, - { 351 * OVERSAMPLENR, 140 }, - { 386 * OVERSAMPLENR, 134 }, - { 421 * OVERSAMPLENR, 128 }, - { 456 * OVERSAMPLENR, 122 }, - { 491 * OVERSAMPLENR, 117 }, - { 526 * OVERSAMPLENR, 112 }, - { 561 * OVERSAMPLENR, 107 }, - { 596 * OVERSAMPLENR, 102 }, - { 631 * OVERSAMPLENR, 97 }, - { 666 * OVERSAMPLENR, 91 }, - { 701 * OVERSAMPLENR, 86 }, - { 736 * OVERSAMPLENR, 81 }, - { 771 * OVERSAMPLENR, 76 }, - { 806 * OVERSAMPLENR, 70 }, - { 841 * OVERSAMPLENR, 63 }, - { 876 * OVERSAMPLENR, 56 }, - { 911 * OVERSAMPLENR, 48 }, - { 946 * OVERSAMPLENR, 38 }, - { 981 * OVERSAMPLENR, 23 }, - { 1005 * OVERSAMPLENR, 5 }, - { 1016 * OVERSAMPLENR, 0 } -}; -#endif - -#if ANY_THERMISTOR_IS(11) -// QU-BD silicone bed QWG-104F-3950 thermistor -const short temptable_11[][2] PROGMEM = { - { 1 * OVERSAMPLENR, 938 }, - { 31 * OVERSAMPLENR, 314 }, - { 41 * OVERSAMPLENR, 290 }, - { 51 * OVERSAMPLENR, 272 }, - { 61 * OVERSAMPLENR, 258 }, - { 71 * OVERSAMPLENR, 247 }, - { 81 * OVERSAMPLENR, 237 }, - { 91 * OVERSAMPLENR, 229 }, - { 101 * OVERSAMPLENR, 221 }, - { 111 * OVERSAMPLENR, 215 }, - { 121 * OVERSAMPLENR, 209 }, - { 131 * OVERSAMPLENR, 204 }, - { 141 * OVERSAMPLENR, 199 }, - { 151 * OVERSAMPLENR, 195 }, - { 161 * OVERSAMPLENR, 190 }, - { 171 * OVERSAMPLENR, 187 }, - { 181 * OVERSAMPLENR, 183 }, - { 191 * OVERSAMPLENR, 179 }, - { 201 * OVERSAMPLENR, 176 }, - { 221 * OVERSAMPLENR, 170 }, - { 241 * OVERSAMPLENR, 165 }, - { 261 * OVERSAMPLENR, 160 }, - { 281 * OVERSAMPLENR, 155 }, - { 301 * OVERSAMPLENR, 150 }, - { 331 * OVERSAMPLENR, 144 }, - { 361 * OVERSAMPLENR, 139 }, - { 391 * OVERSAMPLENR, 133 }, - { 421 * OVERSAMPLENR, 128 }, - { 451 * OVERSAMPLENR, 123 }, - { 491 * OVERSAMPLENR, 117 }, - { 531 * OVERSAMPLENR, 111 }, - { 571 * OVERSAMPLENR, 105 }, - { 611 * OVERSAMPLENR, 100 }, - { 641 * OVERSAMPLENR, 95 }, - { 681 * OVERSAMPLENR, 90 }, - { 711 * OVERSAMPLENR, 85 }, - { 751 * OVERSAMPLENR, 79 }, - { 791 * OVERSAMPLENR, 72 }, - { 811 * OVERSAMPLENR, 69 }, - { 831 * OVERSAMPLENR, 65 }, - { 871 * OVERSAMPLENR, 57 }, - { 881 * OVERSAMPLENR, 55 }, - { 901 * OVERSAMPLENR, 51 }, - { 921 * OVERSAMPLENR, 45 }, - { 941 * OVERSAMPLENR, 39 }, - { 971 * OVERSAMPLENR, 28 }, - { 981 * OVERSAMPLENR, 23 }, - { 991 * OVERSAMPLENR, 17 }, - { 1001 * OVERSAMPLENR, 9 }, - { 1021 * OVERSAMPLENR, -27 } -}; -#endif - -#if ANY_THERMISTOR_IS(13) -// Hisens thermistor B25/50 =3950 +/-1% -const short temptable_13[][2] PROGMEM = { - { 20.04 * OVERSAMPLENR, 300 }, - { 23.19 * OVERSAMPLENR, 290 }, - { 26.71 * OVERSAMPLENR, 280 }, - { 31.23 * OVERSAMPLENR, 270 }, - { 36.52 * OVERSAMPLENR, 260 }, - { 42.75 * OVERSAMPLENR, 250 }, - { 50.68 * OVERSAMPLENR, 240 }, - { 60.22 * OVERSAMPLENR, 230 }, - { 72.03 * OVERSAMPLENR, 220 }, - { 86.84 * OVERSAMPLENR, 210 }, - { 102.79 * OVERSAMPLENR, 200 }, - { 124.46 * OVERSAMPLENR, 190 }, - { 151.02 * OVERSAMPLENR, 180 }, - { 182.86 * OVERSAMPLENR, 170 }, - { 220.72 * OVERSAMPLENR, 160 }, - { 316.96 * OVERSAMPLENR, 140 }, - { 447.17 * OVERSAMPLENR, 120 }, - { 590.61 * OVERSAMPLENR, 100 }, - { 737.31 * OVERSAMPLENR, 80 }, - { 857.77 * OVERSAMPLENR, 60 }, - { 939.52 * OVERSAMPLENR, 40 }, - { 986.03 * OVERSAMPLENR, 20 }, - { 1008.7 * OVERSAMPLENR, 0 } - -}; -#endif - -#if ANY_THERMISTOR_IS(20) // PT100 with INA826 amp on Ultimaker v2.0 electronics -// The PT100 in the Ultimaker v2.0 electronics has a high sample value for a high temperature. -// This does not match the normal thermistor behaviour so we need to set the following defines -#if (THERMISTORHEATER_0 == 20) - #define HEATER_0_RAW_HI_TEMP 16383 - #define HEATER_0_RAW_LO_TEMP 0 -#endif -#if (THERMISTORHEATER_1 == 20) - #define HEATER_1_RAW_HI_TEMP 16383 - #define HEATER_1_RAW_LO_TEMP 0 -#endif -#if (THERMISTORHEATER_2 == 20) - #define HEATER_2_RAW_HI_TEMP 16383 - #define HEATER_2_RAW_LO_TEMP 0 -#endif -#if (THERMISTORHEATER_3 == 20) - #define HEATER_3_RAW_HI_TEMP 16383 - #define HEATER_3_RAW_LO_TEMP 0 -#endif -#if (THERMISTORBED == 20) - #define HEATER_BED_RAW_HI_TEMP 16383 - #define HEATER_BED_RAW_LO_TEMP 0 -#endif -const short temptable_20[][2] PROGMEM = { - { 0 * OVERSAMPLENR, 0 }, - { 227 * OVERSAMPLENR, 1 }, - { 236 * OVERSAMPLENR, 10 }, - { 245 * OVERSAMPLENR, 20 }, - { 253 * OVERSAMPLENR, 30 }, - { 262 * OVERSAMPLENR, 40 }, - { 270 * OVERSAMPLENR, 50 }, - { 279 * OVERSAMPLENR, 60 }, - { 287 * OVERSAMPLENR, 70 }, - { 295 * OVERSAMPLENR, 80 }, - { 304 * OVERSAMPLENR, 90 }, - { 312 * OVERSAMPLENR, 100 }, - { 320 * OVERSAMPLENR, 110 }, - { 329 * OVERSAMPLENR, 120 }, - { 337 * OVERSAMPLENR, 130 }, - { 345 * OVERSAMPLENR, 140 }, - { 353 * OVERSAMPLENR, 150 }, - { 361 * OVERSAMPLENR, 160 }, - { 369 * OVERSAMPLENR, 170 }, - { 377 * OVERSAMPLENR, 180 }, - { 385 * OVERSAMPLENR, 190 }, - { 393 * OVERSAMPLENR, 200 }, - { 401 * OVERSAMPLENR, 210 }, - { 409 * OVERSAMPLENR, 220 }, - { 417 * OVERSAMPLENR, 230 }, - { 424 * OVERSAMPLENR, 240 }, - { 432 * OVERSAMPLENR, 250 }, - { 440 * OVERSAMPLENR, 260 }, - { 447 * OVERSAMPLENR, 270 }, - { 455 * OVERSAMPLENR, 280 }, - { 463 * OVERSAMPLENR, 290 }, - { 470 * OVERSAMPLENR, 300 }, - { 478 * OVERSAMPLENR, 310 }, - { 485 * OVERSAMPLENR, 320 }, - { 493 * OVERSAMPLENR, 330 }, - { 500 * OVERSAMPLENR, 340 }, - { 507 * OVERSAMPLENR, 350 }, - { 515 * OVERSAMPLENR, 360 }, - { 522 * OVERSAMPLENR, 370 }, - { 529 * OVERSAMPLENR, 380 }, - { 537 * OVERSAMPLENR, 390 }, - { 544 * OVERSAMPLENR, 400 }, - { 614 * OVERSAMPLENR, 500 }, - { 681 * OVERSAMPLENR, 600 }, - { 744 * OVERSAMPLENR, 700 }, - { 805 * OVERSAMPLENR, 800 }, - { 862 * OVERSAMPLENR, 900 }, - { 917 * OVERSAMPLENR, 1000 }, - { 968 * OVERSAMPLENR, 1100 } -}; -#endif - -#if ANY_THERMISTOR_IS(51) -// 100k EPCOS (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!) -// Verified by linagee. -// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance -// Advantage: Twice the resolution and better linearity from 150C to 200C -const short temptable_51[][2] PROGMEM = { - { 1 * OVERSAMPLENR, 350 }, - { 190 * OVERSAMPLENR, 250 }, // top rating 250C - { 203 * OVERSAMPLENR, 245 }, - { 217 * OVERSAMPLENR, 240 }, - { 232 * OVERSAMPLENR, 235 }, - { 248 * OVERSAMPLENR, 230 }, - { 265 * OVERSAMPLENR, 225 }, - { 283 * OVERSAMPLENR, 220 }, - { 302 * OVERSAMPLENR, 215 }, - { 322 * OVERSAMPLENR, 210 }, - { 344 * OVERSAMPLENR, 205 }, - { 366 * OVERSAMPLENR, 200 }, - { 390 * OVERSAMPLENR, 195 }, - { 415 * OVERSAMPLENR, 190 }, - { 440 * OVERSAMPLENR, 185 }, - { 467 * OVERSAMPLENR, 180 }, - { 494 * OVERSAMPLENR, 175 }, - { 522 * OVERSAMPLENR, 170 }, - { 551 * OVERSAMPLENR, 165 }, - { 580 * OVERSAMPLENR, 160 }, - { 609 * OVERSAMPLENR, 155 }, - { 638 * OVERSAMPLENR, 150 }, - { 666 * OVERSAMPLENR, 145 }, - { 695 * OVERSAMPLENR, 140 }, - { 722 * OVERSAMPLENR, 135 }, - { 749 * OVERSAMPLENR, 130 }, - { 775 * OVERSAMPLENR, 125 }, - { 800 * OVERSAMPLENR, 120 }, - { 823 * OVERSAMPLENR, 115 }, - { 845 * OVERSAMPLENR, 110 }, - { 865 * OVERSAMPLENR, 105 }, - { 884 * OVERSAMPLENR, 100 }, - { 901 * OVERSAMPLENR, 95 }, - { 917 * OVERSAMPLENR, 90 }, - { 932 * OVERSAMPLENR, 85 }, - { 944 * OVERSAMPLENR, 80 }, - { 956 * OVERSAMPLENR, 75 }, - { 966 * OVERSAMPLENR, 70 }, - { 975 * OVERSAMPLENR, 65 }, - { 982 * OVERSAMPLENR, 60 }, - { 989 * OVERSAMPLENR, 55 }, - { 995 * OVERSAMPLENR, 50 }, - { 1000 * OVERSAMPLENR, 45 }, - { 1004 * OVERSAMPLENR, 40 }, - { 1007 * OVERSAMPLENR, 35 }, - { 1010 * OVERSAMPLENR, 30 }, - { 1013 * OVERSAMPLENR, 25 }, - { 1015 * OVERSAMPLENR, 20 }, - { 1017 * OVERSAMPLENR, 15 }, - { 1018 * OVERSAMPLENR, 10 }, - { 1019 * OVERSAMPLENR, 5 }, - { 1020 * OVERSAMPLENR, 0 }, - { 1021 * OVERSAMPLENR, -5 } -}; -#endif - -#if ANY_THERMISTOR_IS(52) -// 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!) -// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf -// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance -// Advantage: More resolution and better linearity from 150C to 200C -const short temptable_52[][2] PROGMEM = { - { 1 * OVERSAMPLENR, 500 }, - { 125 * OVERSAMPLENR, 300 }, // top rating 300C - { 142 * OVERSAMPLENR, 290 }, - { 162 * OVERSAMPLENR, 280 }, - { 185 * OVERSAMPLENR, 270 }, - { 211 * OVERSAMPLENR, 260 }, - { 240 * OVERSAMPLENR, 250 }, - { 274 * OVERSAMPLENR, 240 }, - { 312 * OVERSAMPLENR, 230 }, - { 355 * OVERSAMPLENR, 220 }, - { 401 * OVERSAMPLENR, 210 }, - { 452 * OVERSAMPLENR, 200 }, - { 506 * OVERSAMPLENR, 190 }, - { 563 * OVERSAMPLENR, 180 }, - { 620 * OVERSAMPLENR, 170 }, - { 677 * OVERSAMPLENR, 160 }, - { 732 * OVERSAMPLENR, 150 }, - { 783 * OVERSAMPLENR, 140 }, - { 830 * OVERSAMPLENR, 130 }, - { 871 * OVERSAMPLENR, 120 }, - { 906 * OVERSAMPLENR, 110 }, - { 935 * OVERSAMPLENR, 100 }, - { 958 * OVERSAMPLENR, 90 }, - { 976 * OVERSAMPLENR, 80 }, - { 990 * OVERSAMPLENR, 70 }, - { 1000 * OVERSAMPLENR, 60 }, - { 1008 * OVERSAMPLENR, 50 }, - { 1013 * OVERSAMPLENR, 40 }, - { 1017 * OVERSAMPLENR, 30 }, - { 1019 * OVERSAMPLENR, 20 }, - { 1021 * OVERSAMPLENR, 10 }, - { 1022 * OVERSAMPLENR, 0 } -}; -#endif - -#if ANY_THERMISTOR_IS(55) -// 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!) -// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf -// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance -// Advantage: More resolution and better linearity from 150C to 200C -const short temptable_55[][2] PROGMEM = { - { 1 * OVERSAMPLENR, 500 }, - { 76 * OVERSAMPLENR, 300 }, - { 87 * OVERSAMPLENR, 290 }, - { 100 * OVERSAMPLENR, 280 }, - { 114 * OVERSAMPLENR, 270 }, - { 131 * OVERSAMPLENR, 260 }, - { 152 * OVERSAMPLENR, 250 }, - { 175 * OVERSAMPLENR, 240 }, - { 202 * OVERSAMPLENR, 230 }, - { 234 * OVERSAMPLENR, 220 }, - { 271 * OVERSAMPLENR, 210 }, - { 312 * OVERSAMPLENR, 200 }, - { 359 * OVERSAMPLENR, 190 }, - { 411 * OVERSAMPLENR, 180 }, - { 467 * OVERSAMPLENR, 170 }, - { 527 * OVERSAMPLENR, 160 }, - { 590 * OVERSAMPLENR, 150 }, - { 652 * OVERSAMPLENR, 140 }, - { 713 * OVERSAMPLENR, 130 }, - { 770 * OVERSAMPLENR, 120 }, - { 822 * OVERSAMPLENR, 110 }, - { 867 * OVERSAMPLENR, 100 }, - { 905 * OVERSAMPLENR, 90 }, - { 936 * OVERSAMPLENR, 80 }, - { 961 * OVERSAMPLENR, 70 }, - { 979 * OVERSAMPLENR, 60 }, - { 993 * OVERSAMPLENR, 50 }, - { 1003 * OVERSAMPLENR, 40 }, - { 1010 * OVERSAMPLENR, 30 }, - { 1015 * OVERSAMPLENR, 20 }, - { 1018 * OVERSAMPLENR, 10 }, - { 1020 * OVERSAMPLENR, 0 } -}; -#endif - -#if ANY_THERMISTOR_IS(60) // Maker's Tool Works Kapton Bed Thermistor -// ./createTemperatureLookup.py --r0=100000 --t0=25 --r1=0 --r2=4700 --beta=3950 -// r0: 100000 -// t0: 25 -// r1: 0 (parallel with rTherm) -// r2: 4700 (series with rTherm) -// beta: 3950 -// min adc: 1 at 0.0048828125 V -// max adc: 1023 at 4.9951171875 V -const short temptable_60[][2] PROGMEM = { - { 51 * OVERSAMPLENR, 272 }, - { 61 * OVERSAMPLENR, 258 }, - { 71 * OVERSAMPLENR, 247 }, - { 81 * OVERSAMPLENR, 237 }, - { 91 * OVERSAMPLENR, 229 }, - { 101 * OVERSAMPLENR, 221 }, - { 131 * OVERSAMPLENR, 204 }, - { 161 * OVERSAMPLENR, 190 }, - { 191 * OVERSAMPLENR, 179 }, - { 231 * OVERSAMPLENR, 167 }, - { 271 * OVERSAMPLENR, 157 }, - { 311 * OVERSAMPLENR, 148 }, - { 351 * OVERSAMPLENR, 140 }, - { 381 * OVERSAMPLENR, 135 }, - { 411 * OVERSAMPLENR, 130 }, - { 441 * OVERSAMPLENR, 125 }, - { 451 * OVERSAMPLENR, 123 }, - { 461 * OVERSAMPLENR, 122 }, - { 471 * OVERSAMPLENR, 120 }, - { 481 * OVERSAMPLENR, 119 }, - { 491 * OVERSAMPLENR, 117 }, - { 501 * OVERSAMPLENR, 116 }, - { 511 * OVERSAMPLENR, 114 }, - { 521 * OVERSAMPLENR, 113 }, - { 531 * OVERSAMPLENR, 111 }, - { 541 * OVERSAMPLENR, 110 }, - { 551 * OVERSAMPLENR, 108 }, - { 561 * OVERSAMPLENR, 107 }, - { 571 * OVERSAMPLENR, 105 }, - { 581 * OVERSAMPLENR, 104 }, - { 591 * OVERSAMPLENR, 102 }, - { 601 * OVERSAMPLENR, 101 }, - { 611 * OVERSAMPLENR, 100 }, - { 621 * OVERSAMPLENR, 98 }, - { 631 * OVERSAMPLENR, 97 }, - { 641 * OVERSAMPLENR, 95 }, - { 651 * OVERSAMPLENR, 94 }, - { 661 * OVERSAMPLENR, 92 }, - { 671 * OVERSAMPLENR, 91 }, - { 681 * OVERSAMPLENR, 90 }, - { 691 * OVERSAMPLENR, 88 }, - { 701 * OVERSAMPLENR, 87 }, - { 711 * OVERSAMPLENR, 85 }, - { 721 * OVERSAMPLENR, 84 }, - { 731 * OVERSAMPLENR, 82 }, - { 741 * OVERSAMPLENR, 81 }, - { 751 * OVERSAMPLENR, 79 }, - { 761 * OVERSAMPLENR, 77 }, - { 771 * OVERSAMPLENR, 76 }, - { 781 * OVERSAMPLENR, 74 }, - { 791 * OVERSAMPLENR, 72 }, - { 801 * OVERSAMPLENR, 71 }, - { 811 * OVERSAMPLENR, 69 }, - { 821 * OVERSAMPLENR, 67 }, - { 831 * OVERSAMPLENR, 65 }, - { 841 * OVERSAMPLENR, 63 }, - { 851 * OVERSAMPLENR, 62 }, - { 861 * OVERSAMPLENR, 60 }, - { 871 * OVERSAMPLENR, 57 }, - { 881 * OVERSAMPLENR, 55 }, - { 891 * OVERSAMPLENR, 53 }, - { 901 * OVERSAMPLENR, 51 }, - { 911 * OVERSAMPLENR, 48 }, - { 921 * OVERSAMPLENR, 45 }, - { 931 * OVERSAMPLENR, 42 }, - { 941 * OVERSAMPLENR, 39 }, - { 951 * OVERSAMPLENR, 36 }, - { 961 * OVERSAMPLENR, 32 }, - { 981 * OVERSAMPLENR, 23 }, - { 991 * OVERSAMPLENR, 17 }, - { 1001 * OVERSAMPLENR, 9 }, - { 1008 * OVERSAMPLENR, 0 } -}; -#endif - -#if ANY_THERMISTOR_IS(66) -// DyzeDesign 500°C Thermistor -const short temptable_66[][2] PROGMEM = { - { 17.5 * OVERSAMPLENR, 850 }, - { 17.9 * OVERSAMPLENR, 500 }, - { 21.7 * OVERSAMPLENR, 480 }, - { 26.6 * OVERSAMPLENR, 460 }, - { 33.1 * OVERSAMPLENR, 440 }, - { 41.0 * OVERSAMPLENR, 420 }, - { 52.3 * OVERSAMPLENR, 400 }, - { 67.7 * OVERSAMPLENR, 380 }, - { 86.5 * OVERSAMPLENR, 360 }, - { 112.0 * OVERSAMPLENR, 340 }, - { 147.2 * OVERSAMPLENR, 320 }, - { 194.0 * OVERSAMPLENR, 300 }, - { 254.3 * OVERSAMPLENR, 280 }, - { 330.2 * OVERSAMPLENR, 260 }, - { 427.9 * OVERSAMPLENR, 240 }, - { 533.4 * OVERSAMPLENR, 220 }, - { 646.5 * OVERSAMPLENR, 200 }, - { 754.4 * OVERSAMPLENR, 180 }, - { 844.3 * OVERSAMPLENR, 160 }, - { 911.7 * OVERSAMPLENR, 140 }, - { 958.6 * OVERSAMPLENR, 120 }, - { 988.8 * OVERSAMPLENR, 100 }, - { 1006.6 * OVERSAMPLENR, 80 }, - { 1015.8 * OVERSAMPLENR, 60 }, - { 1021.3 * OVERSAMPLENR, 30 }, - { 1023 * OVERSAMPLENR - 1, 25}, - { 1023 * OVERSAMPLENR, 20} -}; -#endif - -#if ANY_THERMISTOR_IS(12) -// 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) -const short temptable_12[][2] PROGMEM = { - { 35 * OVERSAMPLENR, 180 }, // top rating 180C - { 211 * OVERSAMPLENR, 140 }, - { 233 * OVERSAMPLENR, 135 }, - { 261 * OVERSAMPLENR, 130 }, - { 290 * OVERSAMPLENR, 125 }, - { 328 * OVERSAMPLENR, 120 }, - { 362 * OVERSAMPLENR, 115 }, - { 406 * OVERSAMPLENR, 110 }, - { 446 * OVERSAMPLENR, 105 }, - { 496 * OVERSAMPLENR, 100 }, - { 539 * OVERSAMPLENR, 95 }, - { 585 * OVERSAMPLENR, 90 }, - { 629 * OVERSAMPLENR, 85 }, - { 675 * OVERSAMPLENR, 80 }, - { 718 * OVERSAMPLENR, 75 }, - { 758 * OVERSAMPLENR, 70 }, - { 793 * OVERSAMPLENR, 65 }, - { 822 * OVERSAMPLENR, 60 }, - { 841 * OVERSAMPLENR, 55 }, - { 875 * OVERSAMPLENR, 50 }, - { 899 * OVERSAMPLENR, 45 }, - { 926 * OVERSAMPLENR, 40 }, - { 946 * OVERSAMPLENR, 35 }, - { 962 * OVERSAMPLENR, 30 }, - { 977 * OVERSAMPLENR, 25 }, - { 987 * OVERSAMPLENR, 20 }, - { 995 * OVERSAMPLENR, 15 }, - { 1001 * OVERSAMPLENR, 10 }, - { 1010 * OVERSAMPLENR, 0 }, - { 1023 * OVERSAMPLENR, -40 } -}; -#endif - -#if ANY_THERMISTOR_IS(70) // bqh2 stock thermistor -const short temptable_70[][2] PROGMEM = { - { 22 * OVERSAMPLENR, 300 }, - { 24 * OVERSAMPLENR, 295 }, - { 25 * OVERSAMPLENR, 290 }, - { 27 * OVERSAMPLENR, 285 }, - { 29 * OVERSAMPLENR, 280 }, - { 32 * OVERSAMPLENR, 275 }, - { 34 * OVERSAMPLENR, 270 }, - { 37 * OVERSAMPLENR, 265 }, - { 40 * OVERSAMPLENR, 260 }, - { 43 * OVERSAMPLENR, 255 }, - { 46 * OVERSAMPLENR, 250 }, - { 50 * OVERSAMPLENR, 245 }, - { 54 * OVERSAMPLENR, 240 }, - { 59 * OVERSAMPLENR, 235 }, - { 64 * OVERSAMPLENR, 230 }, - { 70 * OVERSAMPLENR, 225 }, - { 76 * OVERSAMPLENR, 220 }, - { 83 * OVERSAMPLENR, 215 }, - { 90 * OVERSAMPLENR, 210 }, - { 99 * OVERSAMPLENR, 205 }, - { 108 * OVERSAMPLENR, 200 }, - { 118 * OVERSAMPLENR, 195 }, - { 129 * OVERSAMPLENR, 190 }, - { 141 * OVERSAMPLENR, 185 }, - { 154 * OVERSAMPLENR, 180 }, - { 169 * OVERSAMPLENR, 175 }, - { 185 * OVERSAMPLENR, 170 }, - { 203 * OVERSAMPLENR, 165 }, - { 222 * OVERSAMPLENR, 160 }, - { 243 * OVERSAMPLENR, 155 }, - { 266 * OVERSAMPLENR, 150 }, - { 290 * OVERSAMPLENR, 145 }, - { 317 * OVERSAMPLENR, 140 }, - { 346 * OVERSAMPLENR, 135 }, - { 376 * OVERSAMPLENR, 130 }, - { 408 * OVERSAMPLENR, 125 }, - { 442 * OVERSAMPLENR, 120 }, - { 477 * OVERSAMPLENR, 115 }, - { 513 * OVERSAMPLENR, 110 }, - { 551 * OVERSAMPLENR, 105 }, - { 588 * OVERSAMPLENR, 100 }, - { 626 * OVERSAMPLENR, 95 }, - { 663 * OVERSAMPLENR, 90 }, - { 699 * OVERSAMPLENR, 85 }, - { 735 * OVERSAMPLENR, 80 }, - { 768 * OVERSAMPLENR, 75 }, - { 800 * OVERSAMPLENR, 70 }, - { 829 * OVERSAMPLENR, 65 }, - { 856 * OVERSAMPLENR, 60 }, - { 881 * OVERSAMPLENR, 55 }, - { 903 * OVERSAMPLENR, 50 }, - { 922 * OVERSAMPLENR, 45 }, - { 939 * OVERSAMPLENR, 40 }, - { 954 * OVERSAMPLENR, 35 }, - { 966 * OVERSAMPLENR, 30 }, - { 977 * OVERSAMPLENR, 25 }, - { 986 * OVERSAMPLENR, 20 }, - { 994 * OVERSAMPLENR, 15 }, - { 1000 * OVERSAMPLENR, 10 }, - { 1005 * OVERSAMPLENR, 5 }, - { 1009 * OVERSAMPLENR, 0 } // safety -}; -#endif - // Pt1000 and Pt100 handling // // Rt=R0*(1+a*T+b*T*T) [for T>0] // a=3.9083E-3, b=-5.775E-7 - #define PtA 3.9083E-3 #define PtB -5.775E-7 #define PtRt(T,R0) ((R0)*(1.0+(PtA)*(T)+(PtB)*(T)*(T))) #define PtAdVal(T,R0,Rup) (short)(1024/(Rup/PtRt(T,R0)+1)) #define PtLine(T,R0,Rup) { PtAdVal(T,R0,Rup)*OVERSAMPLENR, T }, +#if ANY_THERMISTOR_IS(1) // 100k bed thermistor + #include "thermistortable_1.h" +#endif +#if ANY_THERMISTOR_IS(2) // 200k bed thermistor + #include "thermistortable_2.h" +#endif +#if ANY_THERMISTOR_IS(3) // mendel-parts + #include "thermistortable_3.h" +#endif +#if ANY_THERMISTOR_IS(4) // 10k thermistor + #include "thermistortable_4.h" +#endif +#if ANY_THERMISTOR_IS(5) // 100k ParCan thermistor (104GT-2) + #include "thermistortable_5.h" +#endif +#if ANY_THERMISTOR_IS(6) // 100k Epcos thermistor + #include "thermistortable_6.h" +#endif +#if ANY_THERMISTOR_IS(7) // 100k Honeywell 135-104LAG-J01 + #include "thermistortable_7.h" +#endif +#if ANY_THERMISTOR_IS(71) // 100k Honeywell 135-104LAF-J01 + #include "thermistortable_71.h" +#endif +#if ANY_THERMISTOR_IS(8) // 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + #include "thermistortable_8.h" +#endif +#if ANY_THERMISTOR_IS(9) // 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + #include "thermistortable_9.h" +#endif +#if ANY_THERMISTOR_IS(10) // 100k RS thermistor 198-961 (4.7k pullup) + #include "thermistortable_10.h" +#endif +#if ANY_THERMISTOR_IS(11) // QU-BD silicone bed QWG-104F-3950 thermistor + #include "thermistortable_11.h" +#endif +#if ANY_THERMISTOR_IS(13) // Hisens thermistor B25/50 =3950 +/-1% + #include "thermistortable_13.h" +#endif +#if ANY_THERMISTOR_IS(20) // PT100 with INA826 amp on Ultimaker v2.0 electronics + #include "thermistortable_20.h" +#endif +#if ANY_THERMISTOR_IS(51) // 100k EPCOS (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!) + #include "thermistortable_51.h" +#endif +#if ANY_THERMISTOR_IS(52) // 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!) + #include "thermistortable_52.h" +#endif +#if ANY_THERMISTOR_IS(55) // 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!) + #include "thermistortable_53.h" +#endif +#if ANY_THERMISTOR_IS(60) // Maker's Tool Works Kapton Bed Thermistor + #include "thermistortable_60.h" +#endif +#if ANY_THERMISTOR_IS(66) // DyzeDesign 500°C Thermistor + #include "thermistortable_66.h" +#endif +#if ANY_THERMISTOR_IS(12) // 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + #include "thermistortable_12.h" +#endif +#if ANY_THERMISTOR_IS(70) // bqh2 stock thermistor + #include "thermistortable_70.h" +#endif #if ANY_THERMISTOR_IS(110) // Pt100 with 1k0 pullup -const short temptable_110[][2] PROGMEM = { - // only few values are needed as the curve is very flat - PtLine( 0, 100, 1000) - PtLine( 50, 100, 1000) - PtLine(100, 100, 1000) - PtLine(150, 100, 1000) - PtLine(200, 100, 1000) - PtLine(250, 100, 1000) - PtLine(300, 100, 1000) -}; + #include "thermistortable_110.h" #endif #if ANY_THERMISTOR_IS(147) // Pt100 with 4k7 pullup -const short temptable_147[][2] PROGMEM = { - // only few values are needed as the curve is very flat - PtLine( 0, 100, 4700) - PtLine( 50, 100, 4700) - PtLine(100, 100, 4700) - PtLine(150, 100, 4700) - PtLine(200, 100, 4700) - PtLine(250, 100, 4700) - PtLine(300, 100, 4700) -}; + #include "thermistortable_147.h" #endif #if ANY_THERMISTOR_IS(1010) // Pt1000 with 1k0 pullup -const short temptable_1010[][2] PROGMEM = { - PtLine( 0, 1000, 1000) - PtLine( 25, 1000, 1000) - PtLine( 50, 1000, 1000) - PtLine( 75, 1000, 1000) - PtLine(100, 1000, 1000) - PtLine(125, 1000, 1000) - PtLine(150, 1000, 1000) - PtLine(175, 1000, 1000) - PtLine(200, 1000, 1000) - PtLine(225, 1000, 1000) - PtLine(250, 1000, 1000) - PtLine(275, 1000, 1000) - PtLine(300, 1000, 1000) -}; + #include "thermistortable_1010.h" #endif #if ANY_THERMISTOR_IS(1047) // Pt1000 with 4k7 pullup -const short temptable_1047[][2] PROGMEM = { - // only few values are needed as the curve is very flat - PtLine( 0, 1000, 4700) - PtLine( 50, 1000, 4700) - PtLine(100, 1000, 4700) - PtLine(150, 1000, 4700) - PtLine(200, 1000, 4700) - PtLine(250, 1000, 4700) - PtLine(300, 1000, 4700) -}; + #include "thermistortable_1047.h" #endif - -#if ANY_THERMISTOR_IS(999) // User-defined table - // Dummy Thermistor table.. It will ALWAYS read a fixed value. - #ifndef DUMMY_THERMISTOR_999_VALUE - #define DUMMY_THERMISTOR_999_VALUE 25 - #endif - const short temptable_999[][2] PROGMEM = { - { 1 * OVERSAMPLENR, DUMMY_THERMISTOR_999_VALUE }, - { 1023 * OVERSAMPLENR, DUMMY_THERMISTOR_999_VALUE } -}; +#if ANY_THERMISTOR_IS(998) // User-defined table 1 + #include "thermistortable_998.h" #endif - -#if ANY_THERMISTOR_IS(998) // User-defined table - // Dummy Thermistor table.. It will ALWAYS read a fixed value. - #ifndef DUMMY_THERMISTOR_998_VALUE - #define DUMMY_THERMISTOR_998_VALUE 25 - #endif - const short temptable_998[][2] PROGMEM = { - { 1 * OVERSAMPLENR, DUMMY_THERMISTOR_998_VALUE }, - { 1023 * OVERSAMPLENR, DUMMY_THERMISTOR_998_VALUE } -}; +#if ANY_THERMISTOR_IS(999) // User-defined table 2 + #include "thermistortable_999.h" #endif - #define _TT_NAME(_N) temptable_ ## _N #define TT_NAME(_N) _TT_NAME(_N) #ifdef THERMISTORHEATER_0 #define HEATER_0_TEMPTABLE TT_NAME(THERMISTORHEATER_0) #define HEATER_0_TEMPTABLE_LEN COUNT(HEATER_0_TEMPTABLE) +#elif defined(HEATER_0_USES_THERMISTOR) + #error "No heater 0 thermistor table specified" #else - #ifdef HEATER_0_USES_THERMISTOR - #error "No heater 0 thermistor table specified" - #else // HEATER_0_USES_THERMISTOR - #define HEATER_0_TEMPTABLE NULL - #define HEATER_0_TEMPTABLE_LEN 0 - #endif // HEATER_0_USES_THERMISTOR -#endif - -// Set the high and low raw values for the heater, this indicates which raw value is a high or low temperature -#ifndef HEATER_0_RAW_HI_TEMP - #ifdef HEATER_0_USES_THERMISTOR // In case of a thermistor the highest temperature results in the lowest ADC value - #define HEATER_0_RAW_HI_TEMP 0 - #define HEATER_0_RAW_LO_TEMP 16383 - #else // In case of an thermocouple the highest temperature results in the highest ADC value - #define HEATER_0_RAW_HI_TEMP 16383 - #define HEATER_0_RAW_LO_TEMP 0 - #endif + #define HEATER_0_TEMPTABLE NULL + #define HEATER_0_TEMPTABLE_LEN 0 #endif #ifdef THERMISTORHEATER_1 #define HEATER_1_TEMPTABLE TT_NAME(THERMISTORHEATER_1) #define HEATER_1_TEMPTABLE_LEN COUNT(HEATER_1_TEMPTABLE) +#elif defined(HEATER_1_USES_THERMISTOR) + #error "No heater 1 thermistor table specified" #else - #ifdef HEATER_1_USES_THERMISTOR - #error "No heater 1 thermistor table specified" - #else // HEATER_1_USES_THERMISTOR - #define HEATER_1_TEMPTABLE NULL - #define HEATER_1_TEMPTABLE_LEN 0 - #endif // HEATER_1_USES_THERMISTOR -#endif - -// Set the high and low raw values for the heater, this indicates which raw value is a high or low temperature -#ifndef HEATER_1_RAW_HI_TEMP - #ifdef HEATER_1_USES_THERMISTOR // In case of a thermistor the highest temperature results in the lowest ADC value - #define HEATER_1_RAW_HI_TEMP 0 - #define HEATER_1_RAW_LO_TEMP 16383 - #else // In case of an thermocouple the highest temperature results in the highest ADC value - #define HEATER_1_RAW_HI_TEMP 16383 - #define HEATER_1_RAW_LO_TEMP 0 - #endif + #define HEATER_1_TEMPTABLE NULL + #define HEATER_1_TEMPTABLE_LEN 0 #endif #ifdef THERMISTORHEATER_2 #define HEATER_2_TEMPTABLE TT_NAME(THERMISTORHEATER_2) #define HEATER_2_TEMPTABLE_LEN COUNT(HEATER_2_TEMPTABLE) +#elif defined(HEATER_2_USES_THERMISTOR) + #error "No heater 2 thermistor table specified" #else - #ifdef HEATER_2_USES_THERMISTOR - #error "No heater 2 thermistor table specified" - #else // HEATER_2_USES_THERMISTOR - #define HEATER_2_TEMPTABLE NULL - #define HEATER_2_TEMPTABLE_LEN 0 - #endif // HEATER_2_USES_THERMISTOR -#endif - -// Set the high and low raw values for the heater, this indicates which raw value is a high or low temperature -#ifndef HEATER_2_RAW_HI_TEMP - #ifdef HEATER_2_USES_THERMISTOR // In case of a thermistor the highest temperature results in the lowest ADC value - #define HEATER_2_RAW_HI_TEMP 0 - #define HEATER_2_RAW_LO_TEMP 16383 - #else // In case of an thermocouple the highest temperature results in the highest ADC value - #define HEATER_2_RAW_HI_TEMP 16383 - #define HEATER_2_RAW_LO_TEMP 0 - #endif + #define HEATER_2_TEMPTABLE NULL + #define HEATER_2_TEMPTABLE_LEN 0 #endif #ifdef THERMISTORHEATER_3 #define HEATER_3_TEMPTABLE TT_NAME(THERMISTORHEATER_3) #define HEATER_3_TEMPTABLE_LEN COUNT(HEATER_3_TEMPTABLE) +#elif defined(HEATER_3_USES_THERMISTOR) + #error "No heater 3 thermistor table specified" #else - #ifdef HEATER_3_USES_THERMISTOR - #error "No heater 3 thermistor table specified" - #else // HEATER_3_USES_THERMISTOR - #define HEATER_3_TEMPTABLE NULL - #define HEATER_3_TEMPTABLE_LEN 0 - #endif // HEATER_3_USES_THERMISTOR -#endif - -// Set the high and low raw values for the heater, this indicates which raw value is a high or low temperature -#ifndef HEATER_3_RAW_HI_TEMP - #ifdef HEATER_3_USES_THERMISTOR // In case of a thermistor the highest temperature results in the lowest ADC value - #define HEATER_3_RAW_HI_TEMP 0 - #define HEATER_3_RAW_LO_TEMP 16383 - #else // In case of an thermocouple the highest temperature results in the highest ADC value - #define HEATER_3_RAW_HI_TEMP 16383 - #define HEATER_3_RAW_LO_TEMP 0 - #endif + #define HEATER_3_TEMPTABLE NULL + #define HEATER_3_TEMPTABLE_LEN 0 #endif #ifdef THERMISTORBED @@ -1309,15 +171,53 @@ const short temptable_1047[][2] PROGMEM = { #else #ifdef BED_USES_THERMISTOR #error "No bed thermistor table specified" - #endif // BED_USES_THERMISTOR + #endif #endif -// Set the high and low raw values for the heater, this indicates which raw value is a high or low temperature +// Set the high and low raw values for the heaters +// For thermistors the highest temperature results in the lowest ADC value +// For thermocouples the highest temperature results in the highest ADC value +#ifndef HEATER_0_RAW_HI_TEMP + #ifdef HEATER_0_USES_THERMISTOR + #define HEATER_0_RAW_HI_TEMP 0 + #define HEATER_0_RAW_LO_TEMP 16383 + #else + #define HEATER_0_RAW_HI_TEMP 16383 + #define HEATER_0_RAW_LO_TEMP 0 + #endif +#endif +#ifndef HEATER_1_RAW_HI_TEMP + #ifdef HEATER_1_USES_THERMISTOR + #define HEATER_1_RAW_HI_TEMP 0 + #define HEATER_1_RAW_LO_TEMP 16383 + #else + #define HEATER_1_RAW_HI_TEMP 16383 + #define HEATER_1_RAW_LO_TEMP 0 + #endif +#endif +#ifndef HEATER_2_RAW_HI_TEMP + #ifdef HEATER_2_USES_THERMISTOR + #define HEATER_2_RAW_HI_TEMP 0 + #define HEATER_2_RAW_LO_TEMP 16383 + #else + #define HEATER_2_RAW_HI_TEMP 16383 + #define HEATER_2_RAW_LO_TEMP 0 + #endif +#endif +#ifndef HEATER_3_RAW_HI_TEMP + #ifdef HEATER_3_USES_THERMISTOR + #define HEATER_3_RAW_HI_TEMP 0 + #define HEATER_3_RAW_LO_TEMP 16383 + #else + #define HEATER_3_RAW_HI_TEMP 16383 + #define HEATER_3_RAW_LO_TEMP 0 + #endif +#endif #ifndef HEATER_BED_RAW_HI_TEMP - #ifdef BED_USES_THERMISTOR // In case of a thermistor the highest temperature results in the lowest ADC value + #ifdef BED_USES_THERMISTOR #define HEATER_BED_RAW_HI_TEMP 0 #define HEATER_BED_RAW_LO_TEMP 16383 - #else // In case of an thermocouple the highest temperature results in the highest ADC value + #else #define HEATER_BED_RAW_HI_TEMP 16383 #define HEATER_BED_RAW_LO_TEMP 0 #endif