bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Fix auto bed leveling - turn on after successful G29

Browse Source
This commit is contained in:
Scott Lahteine 2016-09-26 23:39:45 -05:00
parent f4b9052529
commit e0e0166075
1 changed files with 16 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

30
Marlin/Marlin_main.cpp
View File

@ -3516,7 +3516,7 @@ inline void gcode_G28() {
stepper.synchronize();
// Disable auto bed leveling during G29
bool abl_should_reenable = planner.abl_enabled;
bool abl_should_enable = planner.abl_enabled;
planner.abl_enabled = false;
@ -3534,7 +3534,7 @@ inline void gcode_G28() {
// Deploy the probe. Probe will raise if needed.
if (DEPLOY_PROBE()) {
planner.abl_enabled = abl_should_reenable;
planner.abl_enabled = abl_should_enable;
return;
}
@ -3555,7 +3555,7 @@ inline void gcode_G28() {
bilinear_grid_spacing[X_AXIS] = xGridSpacing;
bilinear_grid_spacing[Y_AXIS] = yGridSpacing;
// Can't re-enable (on error) until the new grid is written
abl_should_reenable = false;
abl_should_enable = false;
}
#elif ENABLED(AUTO_BED_LEVELING_LINEAR)
@ -3617,7 +3617,7 @@ inline void gcode_G28() {
measured_z = probe_pt(xProbe, yProbe, stow_probe_after_each, verbose_level);
if (measured_z == NAN) {
planner.abl_enabled = abl_should_reenable;
planner.abl_enabled = abl_should_enable;
return;
}
@ -3661,7 +3661,7 @@ inline void gcode_G28() {
}
if (measured_z == NAN) {
planner.abl_enabled = abl_should_reenable;
planner.abl_enabled = abl_should_enable;
return;
}
@ -3675,14 +3675,14 @@ inline void gcode_G28() {
planner.bed_level_matrix = matrix_3x3::create_look_at(planeNormal);
// Can't re-enable (on error) until the new grid is written
abl_should_reenable = false;
abl_should_enable = false;
}
#endif // AUTO_BED_LEVELING_3POINT
// Raise to _Z_CLEARANCE_DEPLOY_PROBE. Stow the probe.
if (STOW_PROBE()) {
planner.abl_enabled = abl_should_reenable;
planner.abl_enabled = abl_should_enable;
return;
}
@ -3855,27 +3855,29 @@ inline void gcode_G28() {
current_position[Y_AXIS] = LOGICAL_Y_POSITION(y_dist) + Y_TILT_FULCRUM;
current_position[Z_AXIS] = new_z;
SYNC_PLAN_POSITION_KINEMATIC();
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) DEBUG_POS("G29 corrected XYZ", current_position);
#endif
SYNC_PLAN_POSITION_KINEMATIC();
abl_should_enable = true;
}
#elif ENABLED(AUTO_BED_LEVELING_BILINEAR)
if (!dryrun) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) SERIAL_ECHOPAIR("G29 uncorrected Z:", current_position[Z_AXIS]);
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("G29 uncorrected Z:", current_position[Z_AXIS]);
#endif
current_position[Z_AXIS] -= bilinear_z_offset(current_position);
SYNC_PLAN_POSITION_KINEMATIC();
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) SERIAL_ECHOPAIR("G29 corrected Z:", current_position[Z_AXIS]);
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR(" corrected Z:", current_position[Z_AXIS]);
#endif
SYNC_PLAN_POSITION_KINEMATIC();
abl_should_enable = true;
}
#endif // ABL_PLANAR
@ -3897,7 +3899,7 @@ inline void gcode_G28() {
KEEPALIVE_STATE(IN_HANDLER);
// Auto Bed Leveling is complete! Enable if possible.
planner.abl_enabled = dryrun ? abl_should_reenable : true;
planner.abl_enabled = dryrun ? abl_should_enable : true;
}
#endif // HAS_ABL