From df031ab100e666f3c70d358deefac0f87925e571 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <github@thinkyhead.com>
Date: Sat, 16 Sep 2017 13:14:44 -0500
Subject: [PATCH] Move M106_M107 to cpp

---
 Marlin/src/Marlin.cpp                         |  5 ----
 Marlin/src/gcode/gcode.cpp                    | 12 ++------
 .../temperature/{M106.h => M106_M107.cpp}     | 19 +++++++++++-
 Marlin/src/gcode/temperature/M107.h           | 29 -------------------
 4 files changed, 21 insertions(+), 44 deletions(-)
 rename Marlin/src/gcode/temperature/{M106.h => M106_M107.cpp} (76%)
 delete mode 100644 Marlin/src/gcode/temperature/M107.h

diff --git a/Marlin/src/Marlin.cpp b/Marlin/src/Marlin.cpp
index 3459f36c00..e9f740305c 100644
--- a/Marlin/src/Marlin.cpp
+++ b/Marlin/src/Marlin.cpp
@@ -391,11 +391,6 @@ bool pin_is_protected(const int8_t pin) {
 
 #endif // AUTO_REPORT_TEMPERATURES && (HAS_TEMP_HOTEND || HAS_TEMP_BED)
 
-#if FAN_COUNT > 0
-  #include "gcode/temperature/M106.h"
-  #include "gcode/temperature/M107.h"
-#endif
-
 #if DISABLED(EMERGENCY_PARSER)
   #include "gcode/control/M108.h"
   #include "gcode/control/M112.h"
diff --git a/Marlin/src/gcode/gcode.cpp b/Marlin/src/gcode/gcode.cpp
index fa7a697716..6f9b16f0de 100644
--- a/Marlin/src/gcode/gcode.cpp
+++ b/Marlin/src/gcode/gcode.cpp
@@ -124,8 +124,6 @@ extern void gcode_M83();
 extern void gcode_M85();
 extern void gcode_M92();
 extern void gcode_M100();
-extern void gcode_M106();
-extern void gcode_M107();
 extern void gcode_M108();
 extern void gcode_M110();
 extern void gcode_M111();
@@ -509,13 +507,9 @@ void GcodeSuite::process_next_command() {
       #endif // HAS_TEMP_BED
 
       #if FAN_COUNT > 0
-        case 106: // M106: Fan On
-          gcode_M106();
-          break;
-        case 107: // M107: Fan Off
-          gcode_M107();
-          break;
-      #endif // FAN_COUNT > 0
+        case 106: M106(); break;  // M106: Fan On
+        case 107: M107(); break;  // M107: Fan Off
+      #endif
 
       #if ENABLED(PARK_HEAD_ON_PAUSE)
         case 125: // M125: Store current position and move to filament change position
diff --git a/Marlin/src/gcode/temperature/M106.h b/Marlin/src/gcode/temperature/M106_M107.cpp
similarity index 76%
rename from Marlin/src/gcode/temperature/M106.h
rename to Marlin/src/gcode/temperature/M106_M107.cpp
index 14c1b2ca7d..ce0cca6ef1 100644
--- a/Marlin/src/gcode/temperature/M106.h
+++ b/Marlin/src/gcode/temperature/M106_M107.cpp
@@ -20,15 +20,32 @@
  *
  */
 
+#include "../../inc/MarlinConfig.h"
+
+#if FAN_COUNT > 0
+
+#include "../gcode.h"
+#include "../../Marlin.h" // for fanSpeeds — should move those to Planner
+
 /**
  * M106: Set Fan Speed
  *
  *  S<int>   Speed between 0-255
  *  P<index> Fan index, if more than one fan
  */
-void gcode_M106() {
+void GcodeSuite::M106() {
   uint16_t s = parser.ushortval('S', 255);
   NOMORE(s, 255);
   const uint8_t p = parser.byteval('P', 0);
   if (p < FAN_COUNT) fanSpeeds[p] = s;
 }
+
+/**
+ * M107: Fan Off
+ */
+void GcodeSuite::M107() {
+  const uint16_t p = parser.ushortval('P');
+  if (p < FAN_COUNT) fanSpeeds[p] = 0;
+}
+
+#endif // FAN_COUNT > 0
diff --git a/Marlin/src/gcode/temperature/M107.h b/Marlin/src/gcode/temperature/M107.h
deleted file mode 100644
index ed95801f65..0000000000
--- a/Marlin/src/gcode/temperature/M107.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * M107: Fan Off
- */
-void gcode_M107() {
-  const uint16_t p = parser.ushortval('P');
-  if (p < FAN_COUNT) fanSpeeds[p] = 0;
-}