bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Distinct runout states (#19965)

Browse Source 
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
This commit is contained in:
Costas Basdekis 2020-11-11 06:39:23 +00:00 committed by Scott Lahteine
parent 45b242d5f7
commit dc144fb910
14 changed files with 202 additions and 45 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
Marlin/Configuration.h
View File

@ -1186,9 +1186,27 @@
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500.
#define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
#define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present.
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
#define FIL_RUNOUT_PULL // Use internal pullup / pulldown for filament runout pins.
// Override individually if the runout sensors vary
//#define FIL_RUNOUT1_STATE LOW
//#define FIL_RUNOUT1_PULL
//#define FIL_RUNOUT2_STATE LOW
//#define FIL_RUNOUT2_PULL
//#define FIL_RUNOUT3_STATE LOW
//#define FIL_RUNOUT3_PULL
//#define FIL_RUNOUT4_STATE LOW
//#define FIL_RUNOUT4_PULL
//#define FIL_RUNOUT5_STATE LOW
//#define FIL_RUNOUT5_PULL
//#define FIL_RUNOUT6_STATE LOW
//#define FIL_RUNOUT6_PULL
//#define FIL_RUNOUT7_STATE LOW
//#define FIL_RUNOUT7_PULL
//#define FIL_RUNOUT8_STATE LOW
//#define FIL_RUNOUT8_PULL
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)

3
Marlin/src/HAL/DUE/fastio.h
View File

@ -163,6 +163,9 @@
#define SET_INPUT(IO) _SET_INPUT(IO)
// Set pin as input with pullup (wrapper)
#define SET_INPUT_PULLUP(IO) do{ _SET_INPUT(IO); _PULLUP(IO, HIGH); }while(0)
// Set pin as input with pulldown (substitution)
#define SET_INPUT_PULLDOWN SET_INPUT
// Set pin as output (wrapper) - reads the pin and sets the output to that value
#define SET_OUTPUT(IO) _SET_OUTPUT(IO)
// Set pin as PWM

3
Marlin/src/HAL/ESP32/fastio.h
View File

@ -52,6 +52,9 @@
// Set pin as input with pullup wrapper
#define SET_INPUT_PULLUP(IO) do{ _SET_INPUT(IO); _PULLUP(IO, HIGH); }while(0)
// Set pin as input with pulldown (substitution)
#define SET_INPUT_PULLDOWN SET_INPUT
// Set pin as output wrapper
#define SET_OUTPUT(IO) do{ _SET_OUTPUT(IO); }while(0)

2
Marlin/src/feature/mmu2/mmu2.cpp
View File

@ -163,7 +163,7 @@ uint8_t MMU2::get_current_tool() {
}
#if EITHER(PRUSA_MMU2_S_MODE, MMU_EXTRUDER_SENSOR)
#define FILAMENT_PRESENT() (READ(FIL_RUNOUT_PIN) != FIL_RUNOUT_STATE)
#define FILAMENT_PRESENT() (READ(FIL_RUNOUT1_PIN) != FIL_RUNOUT1_STATE)
#endif
void MMU2::mmu_loop() {

65
Marlin/src/feature/runout.h
View File

@ -149,17 +149,33 @@ class FilamentSensorBase {
public:
static inline void setup() {
#if ENABLED(FIL_RUNOUT_PULLUP)
#define INIT_RUNOUT_PIN(P) SET_INPUT_PULLUP(P)
#elif ENABLED(FIL_RUNOUT_PULLDOWN)
#define INIT_RUNOUT_PIN(P) SET_INPUT_PULLDOWN(P)
#else
#define INIT_RUNOUT_PIN(P) SET_INPUT(P)
#define _INIT_RUNOUT_PIN(P,S,U) do{ if (DISABLED(U)) SET_INPUT(P); else if (S) SET_INPUT_PULLDOWN(P); else SET_INPUT_PULLUP(P); }while(0)
#define INIT_RUNOUT_PIN(N) _INIT_RUNOUT_PIN(FIL_RUNOUT##N##_PIN, FIL_RUNOUT##N##_STATE, FIL_RUNOUT##N##_PULL)
#if NUM_RUNOUT_SENSORS >= 1
INIT_RUNOUT_PIN(1);
#endif
#define _INIT_RUNOUT(N) INIT_RUNOUT_PIN(FIL_RUNOUT##N##_PIN);
REPEAT_S(1, INCREMENT(NUM_RUNOUT_SENSORS), _INIT_RUNOUT)
#undef _INIT_RUNOUT
#if NUM_RUNOUT_SENSORS >= 2
INIT_RUNOUT_PIN(2);
#endif
#if NUM_RUNOUT_SENSORS >= 3
INIT_RUNOUT_PIN(3);
#endif
#if NUM_RUNOUT_SENSORS >= 4
INIT_RUNOUT_PIN(4);
#endif
#if NUM_RUNOUT_SENSORS >= 5
INIT_RUNOUT_PIN(5);
#endif
#if NUM_RUNOUT_SENSORS >= 6
INIT_RUNOUT_PIN(6);
#endif
#if NUM_RUNOUT_SENSORS >= 7
INIT_RUNOUT_PIN(7);
#endif
#if NUM_RUNOUT_SENSORS >= 8
INIT_RUNOUT_PIN(8);
#endif
#undef _INIT_RUNOUT_PIN
#undef INIT_RUNOUT_PIN
}
@ -172,11 +188,32 @@ class FilamentSensorBase {
// Return a bitmask of runout flag states (1 bits always indicates runout)
static inline uint8_t poll_runout_states() {
return poll_runout_pins()
#if FIL_RUNOUT_STATE == LOW
^ uint8_t(_BV(NUM_RUNOUT_SENSORS) - 1)
return poll_runout_pins() ^ uint8_t(0
#if NUM_RUNOUT_SENSORS >= 1
| (FIL_RUNOUT1_STATE ? 0 : _BV(1 - 1))
#endif
;
#if NUM_RUNOUT_SENSORS >= 2
| (FIL_RUNOUT2_STATE ? 0 : _BV(2 - 1))
#endif
#if NUM_RUNOUT_SENSORS >= 3
| (FIL_RUNOUT3_STATE ? 0 : _BV(3 - 1))
#endif
#if NUM_RUNOUT_SENSORS >= 4
| (FIL_RUNOUT4_STATE ? 0 : _BV(4 - 1))
#endif
#if NUM_RUNOUT_SENSORS >= 5
| (FIL_RUNOUT5_STATE ? 0 : _BV(5 - 1))
#endif
#if NUM_RUNOUT_SENSORS >= 6
| (FIL_RUNOUT6_STATE ? 0 : _BV(6 - 1))
#endif
#if NUM_RUNOUT_SENSORS >= 7
| (FIL_RUNOUT7_STATE ? 0 : _BV(7 - 1))
#endif
#if NUM_RUNOUT_SENSORS >= 8
| (FIL_RUNOUT8_STATE ? 0 : _BV(8 - 1))
#endif
);
}
};

2
Marlin/src/gcode/feature/pause/M600.cpp
View File

@ -88,7 +88,7 @@ void GcodeSuite::M600() {
// In this case, for duplicating modes set DXC_ext to the extruder that ran out.
#if HAS_FILAMENT_SENSOR && NUM_RUNOUT_SENSORS > 1
if (idex_is_duplicating())
DXC_ext = (READ(FIL_RUNOUT2_PIN) == FIL_RUNOUT_STATE) ? 1 : 0;
DXC_ext = (READ(FIL_RUNOUT2_PIN) == FIL_RUNOUT2_STATE) ? 1 : 0;
#else
DXC_ext = active_extruder;
#endif

67
Marlin/src/inc/Conditionals_LCD.h
View File

@ -675,6 +675,73 @@
#define HAS_BED_PROBE 1
#endif
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
#if NUM_RUNOUT_SENSORS >= 1
#ifndef FIL_RUNOUT1_STATE
#define FIL_RUNOUT1_STATE FIL_RUNOUT_STATE
#endif
#ifndef FIL_RUNOUT1_PULL
#define FIL_RUNOUT1_PULL FIL_RUNOUT_PULL
#endif
#endif
#if NUM_RUNOUT_SENSORS >= 2
#ifndef FIL_RUNOUT2_STATE
#define FIL_RUNOUT2_STATE FIL_RUNOUT_STATE
#endif
#ifndef FIL_RUNOUT2_PULL
#define FIL_RUNOUT2_PULL FIL_RUNOUT_PULL
#endif
#endif
#if NUM_RUNOUT_SENSORS >= 3
#ifndef FIL_RUNOUT3_STATE
#define FIL_RUNOUT3_STATE FIL_RUNOUT_STATE
#endif
#ifndef FIL_RUNOUT3_PULL
#define FIL_RUNOUT3_PULL FIL_RUNOUT_PULL
#endif
#endif
#if NUM_RUNOUT_SENSORS >= 4
#ifndef FIL_RUNOUT4_STATE
#define FIL_RUNOUT4_STATE FIL_RUNOUT_STATE
#endif
#ifndef FIL_RUNOUT4_PULL
#define FIL_RUNOUT4_PULL FIL_RUNOUT_PULL
#endif
#endif
#if NUM_RUNOUT_SENSORS >= 5
#ifndef FIL_RUNOUT5_STATE
#define FIL_RUNOUT5_STATE FIL_RUNOUT_STATE
#endif
#ifndef FIL_RUNOUT5_PULL
#define FIL_RUNOUT5_PULL FIL_RUNOUT_PULL
#endif
#endif
#if NUM_RUNOUT_SENSORS >= 6
#ifndef FIL_RUNOUT6_STATE
#define FIL_RUNOUT6_STATE FIL_RUNOUT_STATE
#endif
#ifndef FIL_RUNOUT6_PULL
#define FIL_RUNOUT6_PULL FIL_RUNOUT_PULL
#endif
#endif
#if NUM_RUNOUT_SENSORS >= 7
#ifndef FIL_RUNOUT7_STATE
#define FIL_RUNOUT7_STATE FIL_RUNOUT_STATE
#endif
#ifndef FIL_RUNOUT7_PULL
#define FIL_RUNOUT7_PULL FIL_RUNOUT_PULL
#endif
#endif
#if NUM_RUNOUT_SENSORS >= 8
#ifndef FIL_RUNOUT8_STATE
#define FIL_RUNOUT8_STATE FIL_RUNOUT_STATE
#endif
#ifndef FIL_RUNOUT8_PULL
#define FIL_RUNOUT8_PULL FIL_RUNOUT_PULL
#endif
#endif
#endif // FILAMENT_RUNOUT_SENSOR
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
#undef PROBE_MANUALLY
#endif

30
Marlin/src/inc/SanityCheck.h
View File

@ -111,7 +111,7 @@
#elif defined(FILAMENT_SENSOR)
#error "FILAMENT_SENSOR is now FILAMENT_WIDTH_SENSOR. Please update your configuration."
#elif defined(ENDSTOPPULLUP_FIL_RUNOUT)
#error "ENDSTOPPULLUP_FIL_RUNOUT is now FIL_RUNOUT_PULLUP. Please update your configuration."
#error "ENDSTOPPULLUP_FIL_RUNOUT is now FIL_RUNOUT_PULL. Please update your configuration."
#elif defined(DISABLE_MAX_ENDSTOPS) || defined(DISABLE_MIN_ENDSTOPS)
#error "DISABLE_MAX_ENDSTOPS and DISABLE_MIN_ENDSTOPS deprecated. Use individual USE_*_PLUG options instead."
#elif defined(LANGUAGE_INCLUDE)
@ -660,8 +660,6 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#if BOTH(ENDSTOPPULLUPS, ENDSTOPPULLDOWNS)
#error "Enable only one of ENDSTOPPULLUPS or ENDSTOPPULLDOWNS."
#elif BOTH(FIL_RUNOUT_PULLUP, FIL_RUNOUT_PULLDOWN)
#error "Enable only one of FIL_RUNOUT_PULLUP or FIL_RUNOUT_PULLDOWN."
#elif BOTH(ENDSTOPPULLUP_XMAX, ENDSTOPPULLDOWN_XMAX)
#error "Enable only one of ENDSTOPPULLUP_X_MAX or ENDSTOPPULLDOWN_X_MAX."
#elif BOTH(ENDSTOPPULLUP_YMAX, ENDSTOPPULLDOWN_YMAX)
@ -814,18 +812,20 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#error "FILAMENT_RUNOUT_SENSOR requires FIL_RUNOUT_PIN."
#elif NUM_RUNOUT_SENSORS > E_STEPPERS
#error "NUM_RUNOUT_SENSORS cannot exceed the number of E steppers."
#elif NUM_RUNOUT_SENSORS > 1 && !PIN_EXISTS(FIL_RUNOUT2)
#error "FILAMENT_RUNOUT_SENSOR with NUM_RUNOUT_SENSORS > 1 requires FIL_RUNOUT2_PIN."
#elif NUM_RUNOUT_SENSORS > 2 && !PIN_EXISTS(FIL_RUNOUT3)
#error "FILAMENT_RUNOUT_SENSOR with NUM_RUNOUT_SENSORS > 2 requires FIL_RUNOUT3_PIN."
#elif NUM_RUNOUT_SENSORS > 3 && !PIN_EXISTS(FIL_RUNOUT4)
#error "FILAMENT_RUNOUT_SENSOR with NUM_RUNOUT_SENSORS > 3 requires FIL_RUNOUT4_PIN."
#elif NUM_RUNOUT_SENSORS > 4 && !PIN_EXISTS(FIL_RUNOUT5)
#error "FILAMENT_RUNOUT_SENSOR with NUM_RUNOUT_SENSORS > 4 requires FIL_RUNOUT5_PIN."
#elif NUM_RUNOUT_SENSORS > 5 && !PIN_EXISTS(FIL_RUNOUT6)
#error "FILAMENT_RUNOUT_SENSOR with NUM_RUNOUT_SENSORS > 5 requires FIL_RUNOUT6_PIN."
#elif NONE(SDSUPPORT, PRINTJOB_TIMER_AUTOSTART)
#error "FILAMENT_RUNOUT_SENSOR requires SDSUPPORT or PRINTJOB_TIMER_AUTOSTART."
#elif NUM_RUNOUT_SENSORS >= 2 && !PIN_EXISTS(FIL_RUNOUT2)
#error "FIL_RUNOUT2_PIN is required with NUM_RUNOUT_SENSORS >= 2."
#elif NUM_RUNOUT_SENSORS >= 3 && !PIN_EXISTS(FIL_RUNOUT3)
#error "FIL_RUNOUT3_PIN is required with NUM_RUNOUT_SENSORS >= 3."
#elif NUM_RUNOUT_SENSORS >= 4 && !PIN_EXISTS(FIL_RUNOUT4)
#error "FIL_RUNOUT4_PIN is required with NUM_RUNOUT_SENSORS >= 4."
#elif NUM_RUNOUT_SENSORS >= 5 && !PIN_EXISTS(FIL_RUNOUT5)
#error "FIL_RUNOUT5_PIN is required with NUM_RUNOUT_SENSORS >= 5."
#elif NUM_RUNOUT_SENSORS >= 6 && !PIN_EXISTS(FIL_RUNOUT6)
#error "FIL_RUNOUT6_PIN is required with NUM_RUNOUT_SENSORS >= 6."
#elif NUM_RUNOUT_SENSORS >= 7 && !PIN_EXISTS(FIL_RUNOUT7)
#error "FIL_RUNOUT7_PIN is required with NUM_RUNOUT_SENSORS >= 7."
#elif NUM_RUNOUT_SENSORS >= 8 && !PIN_EXISTS(FIL_RUNOUT8)
#error "FIL_RUNOUT8_PIN is required with NUM_RUNOUT_SENSORS >= 8."
#elif FILAMENT_RUNOUT_DISTANCE_MM < 0
#error "FILAMENT_RUNOUT_DISTANCE_MM must be greater than or equal to zero."
#elif DISABLED(ADVANCED_PAUSE_FEATURE)

4
Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft.cpp
View File

@ -76,8 +76,8 @@ namespace Anycubic {
#endif
// Filament runout is handled by Marlin settings in Configuration.h
// set FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present.
// enable FIL_RUNOUT_PULLUP
// opt_set FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present.
// opt_enable FIL_RUNOUT_PULL
TFTSer.begin(115200);

6
Marlin/src/lcd/extui/lib/anycubic_i3mega/anycubic_i3mega_lcd.cpp
View File

@ -87,7 +87,7 @@ void AnycubicTFTClass::OnSetup() {
SET_INPUT_PULLUP(SD_DETECT_PIN);
#endif
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
SET_INPUT_PULLUP(FIL_RUNOUT_PIN);
SET_INPUT_PULLUP(FIL_RUNOUT1_PIN);
#endif
mediaPrintingState = AMPRINTSTATE_NOT_PRINTING;
@ -935,7 +935,7 @@ void AnycubicTFTClass::DoFilamentRunoutCheck() {
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
// NOTE: ExtUI::getFilamentRunoutState() only returns the runout state if the job is printing
// we want to actually check the status of the pin here, regardless of printstate
if (READ(FIL_RUNOUT_PIN)) {
if (READ(FIL_RUNOUT1_PIN)) {
if (mediaPrintingState == AMPRINTSTATE_PRINTING || mediaPrintingState == AMPRINTSTATE_PAUSED || mediaPrintingState == AMPRINTSTATE_PAUSE_REQUESTED) {
// play tone to indicate filament is out
ExtUI::injectCommands_P(PSTR("\nM300 P200 S1567\nM300 P200 S1174\nM300 P200 S1567\nM300 P200 S1174\nM300 P2000 S1567"));
@ -983,7 +983,7 @@ void AnycubicTFTClass::PausePrint() {
void AnycubicTFTClass::ResumePrint() {
#if ENABLED(SDSUPPORT)
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
if (READ(FIL_RUNOUT_PIN)) {
if (READ(FIL_RUNOUT1_PIN)) {
#if ENABLED(ANYCUBIC_LCD_DEBUG)
SERIAL_ECHOLNPGM("TFT Serial Debug: Resume Print with filament sensor still tripped... ");
#endif

4
Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/endstop_state_screen.cpp
View File

@ -92,12 +92,12 @@ void EndstopStatesScreen::onRedraw(draw_mode_t) {
PIN_DISABLED(5, 3, PSTR(STR_Z_MIN), Z_MIN)
#endif
#if ENABLED(FILAMENT_RUNOUT_SENSOR) && PIN_EXISTS(FIL_RUNOUT)
PIN_ENABLED (1, 4, GET_TEXT_F(MSG_RUNOUT_1), FIL_RUNOUT, FIL_RUNOUT_STATE)
PIN_ENABLED (1, 4, GET_TEXT_F(MSG_RUNOUT_1), FIL_RUNOUT, FIL_RUNOUT1_STATE)
#else
PIN_DISABLED(1, 4, GET_TEXT_F(MSG_RUNOUT_1), FIL_RUNOUT)
#endif
#if BOTH(HAS_MULTI_EXTRUDER, FILAMENT_RUNOUT_SENSOR) && PIN_EXISTS(FIL_RUNOUT2)
PIN_ENABLED (3, 4, GET_TEXT_F(MSG_RUNOUT_2), FIL_RUNOUT2, FIL_RUNOUT_STATE)
PIN_ENABLED (3, 4, GET_TEXT_F(MSG_RUNOUT_2), FIL_RUNOUT2, FIL_RUNOUT2_STATE)
#else
PIN_DISABLED(3, 4, GET_TEXT_F(MSG_RUNOUT_2), FIL_RUNOUT2)
#endif

7
Marlin/src/module/endstops.cpp
View File

@ -459,18 +459,19 @@ void _O2 Endstops::report_states() {
#endif
#if HAS_FILAMENT_SENSOR
#if NUM_RUNOUT_SENSORS == 1
print_es_state(READ(FIL_RUNOUT_PIN) != FIL_RUNOUT_STATE, PSTR(STR_FILAMENT_RUNOUT_SENSOR));
print_es_state(READ(FIL_RUNOUT1_PIN) != FIL_RUNOUT1_STATE, PSTR(STR_FILAMENT_RUNOUT_SENSOR));
#else
#define _CASE_RUNOUT(N) case N: pin = FIL_RUNOUT##N##_PIN; break;
#define _CASE_RUNOUT(N) case N: pin = FIL_RUNOUT##N##_PIN; state = FIL_RUNOUT##N##_STATE; break;
LOOP_S_LE_N(i, 1, NUM_RUNOUT_SENSORS) {
pin_t pin;
uint8_t state;
switch (i) {
default: continue;
REPEAT_S(1, INCREMENT(NUM_RUNOUT_SENSORS), _CASE_RUNOUT)
}
SERIAL_ECHOPGM(STR_FILAMENT_RUNOUT_SENSOR);
if (i > 1) SERIAL_CHAR(' ', '0' + i);
print_es_state(extDigitalRead(pin) != FIL_RUNOUT_STATE);
print_es_state(extDigitalRead(pin) != state);
}
#undef _CASE_RUNOUT
#endif

15
buildroot/tests/BIGTREE_GTR_V1_0-tests
View File

@ -24,7 +24,20 @@ opt_set E2_AUTO_FAN_PIN PC12
opt_set X_DRIVER_TYPE TMC2208
opt_set Y_DRIVER_TYPE TMC2130
opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
exec_test $1 $2 "BigTreeTech GTR 8 Extruders with Auto-Fan and Mixed TMC Drivers"
opt_enable FILAMENT_RUNOUT_SENSOR NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE
opt_set FIL_RUNOUT_PIN 3
opt_set FIL_RUNOUT2_PIN 4
opt_set FIL_RUNOUT3_PIN 5
opt_set FIL_RUNOUT4_PIN 6
opt_set FIL_RUNOUT5_PIN 7
opt_set FIL_RUNOUT6_PIN 8
opt_set FIL_RUNOUT7_PIN 9
opt_set FIL_RUNOUT8_PIN 10
opt_set FIL_RUNOUT4_STATE HIGH
opt_enable FIL_RUNOUT4_PULL
opt_set FIL_RUNOUT8_STATE HIGH
opt_enable FIL_RUNOUT8_PULL
exec_test $1 $2 "BigTreeTech GTR 8 Extruders with Auto-Fan, Mixed TMC Drivers, and Runout Sensors with distinct states"
restore_configs
opt_set MOTHERBOARD BOARD_BTT_GTR_V1_0

15
buildroot/tests/mega2560-tests
View File

@ -75,6 +75,21 @@ opt_enable ZONESTAR_LCD Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_
FILAMENT_RUNOUT_SENSOR NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE Z_SAFE_HOMING
exec_test $1 $2 "RAMPS | ZONESTAR + Chinese | MMU2 | Servo | 3-Point + Debug | G38 ..."
#
# 5 runout sensors with distinct states
#
restore_configs
opt_set EXTRUDERS 5
opt_set NUM_SERVOS 1
opt_enable ZONESTAR_LCD Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE BOOT_MARLIN_LOGO_ANIMATED \
AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS EEPROM_CHITCHAT M114_DETAIL \
NO_VOLUMETRICS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES AUTOTEMP G38_PROBE_TARGET JOYSTICK \
PRUSA_MMU2 MMU2_MENUS PRUSA_MMU2_S_MODE DIRECT_STEPPING DETECT_BROKEN_ENDSTOP \
FILAMENT_RUNOUT_SENSOR NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE Z_SAFE_HOMING FIL_RUNOUT3_PULL
opt_set MIXING_STEPPERS 5
opt_set FIL_RUNOUT3_STATE HIGH
exec_test $1 $2 "Multiple runout sensors (x5) | Distinct runout states"
#
# Test MINIRAMBO with PWM_MOTOR_CURRENT and many features
#