bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Postmortem Debugging to serial port (#20492)

Browse Source
This commit is contained in:
X-Ryl669 2021-02-21 03:22:20 +01:00 committed by Scott Lahteine
parent 61753bb5e3
commit dc11874abe
34 changed files with 1286 additions and 740 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
Marlin/Configuration_adv.h
View File

@ -3732,3 +3732,10 @@
// Enable Marlin dev mode which adds some special commands // Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE //#define MARLIN_DEV_MODE
/**
* Postmortem Debugging captures misbehavior and outputs the CPU status and backtrace to serial.
* When running in the debugger it will break for debugging. This is useful to help understand
* a crash from a remote location. Requires ~400 bytes of SRAM and 5Kb of flash.
*/
//#define POSTMORTEM_DEBUGGING

7
Marlin/src/HAL/AVR/inc/SanityCheck.h
View File

@ -56,3 +56,10 @@
#if BOTH(HAS_TMC_SW_SERIAL, MONITOR_DRIVER_STATUS) #if BOTH(HAS_TMC_SW_SERIAL, MONITOR_DRIVER_STATUS)
#error "MONITOR_DRIVER_STATUS causes performance issues when used with SoftwareSerial-connected drivers. Disable MONITOR_DRIVER_STATUS or use hardware serial to continue." #error "MONITOR_DRIVER_STATUS causes performance issues when used with SoftwareSerial-connected drivers. Disable MONITOR_DRIVER_STATUS or use hardware serial to continue."
#endif #endif
/**
* Postmortem debugging
*/
#if ENABLED(POSTMORTEM_DEBUGGING)
#error "POSTMORTEM_DEBUGGING is not supported on AVR boards."
#endif

342
Marlin/src/HAL/DUE/DebugMonitor.cpp
View File

@ -1,342 +0,0 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef ARDUINO_ARCH_SAM
#include "../../core/macros.h"
#include "../../core/serial.h"
#include "../shared/backtrace/unwinder.h"
#include "../shared/backtrace/unwmemaccess.h"
#include <stdarg.h>
// Debug monitor that dumps to the Programming port all status when
// an exception or WDT timeout happens - And then resets the board
// All the Monitor routines must run with interrupts disabled and
// under an ISR execution context. That is why we cannot reuse the
// Serial interrupt routines or any C runtime, as we don't know the
// state we are when running them
// A SW memory barrier, to ensure GCC does not overoptimize loops
#define sw_barrier() __asm__ volatile("": : :"memory");
// (re)initialize UART0 as a monitor output to 250000,n,8,1
static void TXBegin() {
// Disable UART interrupt in NVIC
NVIC_DisableIRQ( UART_IRQn );
// We NEED memory barriers to ensure Interrupts are actually disabled!
// ( https://dzone.com/articles/nvic-disabling-interrupts-on-arm-cortex-m-and-the )
__DSB();
__ISB();
// Disable clock
pmc_disable_periph_clk( ID_UART );
// Configure PMC
pmc_enable_periph_clk( ID_UART );
// Disable PDC channel
UART->UART_PTCR = UART_PTCR_RXTDIS | UART_PTCR_TXTDIS;
// Reset and disable receiver and transmitter
UART->UART_CR = UART_CR_RSTRX | UART_CR_RSTTX | UART_CR_RXDIS | UART_CR_TXDIS;
// Configure mode: 8bit, No parity, 1 bit stop
UART->UART_MR = UART_MR_CHMODE_NORMAL | US_MR_CHRL_8_BIT | US_MR_NBSTOP_1_BIT | UART_MR_PAR_NO;
// Configure baudrate (asynchronous, no oversampling) to BAUDRATE bauds
UART->UART_BRGR = (SystemCoreClock / (BAUDRATE << 4));
// Enable receiver and transmitter
UART->UART_CR = UART_CR_RXEN | UART_CR_TXEN;
}
// Send character through UART with no interrupts
static void TX(char c) {
while (!(UART->UART_SR & UART_SR_TXRDY)) { WDT_Restart(WDT); sw_barrier(); };
UART->UART_THR = c;
}
// Send String through UART
static void TX(const char* s) {
while (*s) TX(*s++);
}
static void TXDigit(uint32_t d) {
if (d < 10) TX((char)(d+'0'));
else if (d < 16) TX((char)(d+'A'-10));
else TX('?');
}
// Send Hex number thru UART
static void TXHex(uint32_t v) {
TX("0x");
for (uint8_t i = 0; i < 8; i++, v <<= 4)
TXDigit((v >> 28) & 0xF);
}
// Send Decimal number thru UART
static void TXDec(uint32_t v) {
if (!v) {
TX('0');
return;
}
char nbrs[14];
char *p = &nbrs[0];
while (v != 0) {
*p++ = '0' + (v % 10);
v /= 10;
}
do {
p--;
TX(*p);
} while (p != &nbrs[0]);
}
// Dump a backtrace entry
static bool UnwReportOut(void* ctx, const UnwReport* bte) {
int* p = (int*)ctx;
(*p)++;
TX('#'); TXDec(*p); TX(" : ");
TX(bte->name?bte->name:"unknown"); TX('@'); TXHex(bte->function);
TX('+'); TXDec(bte->address - bte->function);
TX(" PC:");TXHex(bte->address); TX('\n');
return true;
}
#ifdef UNW_DEBUG
void UnwPrintf(const char* format, ...) {
char dest[256];
va_list argptr;
va_start(argptr, format);
vsprintf(dest, format, argptr);
va_end(argptr);
TX(&dest[0]);
}
#endif
/* Table of function pointers for passing to the unwinder */
static const UnwindCallbacks UnwCallbacks = {
UnwReportOut,
UnwReadW,
UnwReadH,
UnwReadB
#ifdef UNW_DEBUG
, UnwPrintf
#endif
};
/**
* HardFaultHandler_C:
* This is called from the HardFault_HandlerAsm with a pointer the Fault stack
* as the parameter. We can then read the values from the stack and place them
* into local variables for ease of reading.
* We then read the various Fault Status and Address Registers to help decode
* cause of the fault.
* The function ends with a BKPT instruction to force control back into the debugger
*/
extern "C"
void HardFault_HandlerC(unsigned long *sp, unsigned long lr, unsigned long cause) {
static const char* causestr[] = {
"NMI","Hard","Mem","Bus","Usage","Debug","WDT","RSTC"
};
UnwindFrame btf;
// Dump report to the Programming port (interrupts are DISABLED)
TXBegin();
TX("\n\n## Software Fault detected ##\n");
TX("Cause: "); TX(causestr[cause]); TX('\n');
TX("R0 : "); TXHex(((unsigned long)sp[0])); TX('\n');
TX("R1 : "); TXHex(((unsigned long)sp[1])); TX('\n');
TX("R2 : "); TXHex(((unsigned long)sp[2])); TX('\n');
TX("R3 : "); TXHex(((unsigned long)sp[3])); TX('\n');
TX("R12 : "); TXHex(((unsigned long)sp[4])); TX('\n');
TX("LR : "); TXHex(((unsigned long)sp[5])); TX('\n');
TX("PC : "); TXHex(((unsigned long)sp[6])); TX('\n');
TX("PSR : "); TXHex(((unsigned long)sp[7])); TX('\n');
// Configurable Fault Status Register
// Consists of MMSR, BFSR and UFSR
TX("CFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED28)))); TX('\n');
// Hard Fault Status Register
TX("HFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED2C)))); TX('\n');
// Debug Fault Status Register
TX("DFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED30)))); TX('\n');
// Auxiliary Fault Status Register
TX("AFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED3C)))); TX('\n');
// Read the Fault Address Registers. These may not contain valid values.
// Check BFARVALID/MMARVALID to see if they are valid values
// MemManage Fault Address Register
TX("MMAR : "); TXHex((*((volatile unsigned long *)(0xE000ED34)))); TX('\n');
// Bus Fault Address Register
TX("BFAR : "); TXHex((*((volatile unsigned long *)(0xE000ED38)))); TX('\n');
TX("ExcLR: "); TXHex(lr); TX('\n');
TX("ExcSP: "); TXHex((unsigned long)sp); TX('\n');
btf.sp = ((unsigned long)sp) + 8*4; // The original stack pointer
btf.fp = btf.sp;
btf.lr = ((unsigned long)sp[5]);
btf.pc = ((unsigned long)sp[6]) | 1; // Force Thumb, as CORTEX only support it
// Perform a backtrace
TX("\nBacktrace:\n\n");
int ctr = 0;
UnwindStart(&btf, &UnwCallbacks, &ctr);
// Disable all NVIC interrupts
NVIC->ICER[0] = 0xFFFFFFFF;
NVIC->ICER[1] = 0xFFFFFFFF;
// Relocate VTOR table to default position
SCB->VTOR = 0;
// Disable USB
otg_disable();
// Restart watchdog
WDT_Restart(WDT);
// Reset controller
NVIC_SystemReset();
for (;;) WDT_Restart(WDT);
}
__attribute__((naked)) void NMI_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#0")
A("b HardFault_HandlerC")
);
}
__attribute__((naked)) void HardFault_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#1")
A("b HardFault_HandlerC")
);
}
__attribute__((naked)) void MemManage_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#2")
A("b HardFault_HandlerC")
);
}
__attribute__((naked)) void BusFault_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#3")
A("b HardFault_HandlerC")
);
}
__attribute__((naked)) void UsageFault_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#4")
A("b HardFault_HandlerC")
);
}
__attribute__((naked)) void DebugMon_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#5")
A("b HardFault_HandlerC")
);
}
/* This is NOT an exception, it is an interrupt handler - Nevertheless, the framing is the same */
__attribute__((naked)) void WDT_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#6")
A("b HardFault_HandlerC")
);
}
__attribute__((naked)) void RSTC_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#7")
A("b HardFault_HandlerC")
);
}
#endif // ARDUINO_ARCH_SAM

3
Marlin/src/HAL/DUE/HAL.cpp
View File

@ -40,6 +40,8 @@ uint16_t HAL_adc_result;
// Public functions // Public functions
// ------------------------ // ------------------------
TERN_(POSTMORTEM_DEBUGGING, extern void install_min_serial());
// HAL initialization task // HAL initialization task
void HAL_init() { void HAL_init() {
// Initialize the USB stack // Initialize the USB stack
@ -47,6 +49,7 @@ void HAL_init() {
OUT_WRITE(SDSS, HIGH); // Try to set SDSS inactive before any other SPI users start up OUT_WRITE(SDSS, HIGH); // Try to set SDSS inactive before any other SPI users start up
#endif #endif
usb_task_init(); usb_task_init();
TERN_(POSTMORTEM_DEBUGGING, install_min_serial()); // Install the min serial handler
} }
// HAL idle task // HAL idle task

91
Marlin/src/HAL/DUE/HAL_MinSerial.cpp Normal file
View File

@ -0,0 +1,91 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef ARDUINO_ARCH_SAM
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(POSTMORTEM_DEBUGGING)
#include "../shared/HAL_MinSerial.h"
#include <stdarg.h>
static void TXBegin() {
// Disable UART interrupt in NVIC
NVIC_DisableIRQ( UART_IRQn );
// We NEED memory barriers to ensure Interrupts are actually disabled!
// ( https://dzone.com/articles/nvic-disabling-interrupts-on-arm-cortex-m-and-the )
__DSB();
__ISB();
// Disable clock
pmc_disable_periph_clk( ID_UART );
// Configure PMC
pmc_enable_periph_clk( ID_UART );
// Disable PDC channel
UART->UART_PTCR = UART_PTCR_RXTDIS | UART_PTCR_TXTDIS;
// Reset and disable receiver and transmitter
UART->UART_CR = UART_CR_RSTRX | UART_CR_RSTTX | UART_CR_RXDIS | UART_CR_TXDIS;
// Configure mode: 8bit, No parity, 1 bit stop
UART->UART_MR = UART_MR_CHMODE_NORMAL | US_MR_CHRL_8_BIT | US_MR_NBSTOP_1_BIT | UART_MR_PAR_NO;
// Configure baudrate (asynchronous, no oversampling) to BAUDRATE bauds
UART->UART_BRGR = (SystemCoreClock / (BAUDRATE << 4));
// Enable receiver and transmitter
UART->UART_CR = UART_CR_RXEN | UART_CR_TXEN;
}
// A SW memory barrier, to ensure GCC does not overoptimize loops
#define sw_barrier() __asm__ volatile("": : :"memory");
static void TX(char c) {
while (!(UART->UART_SR & UART_SR_TXRDY)) { WDT_Restart(WDT); sw_barrier(); };
UART->UART_THR = c;
}
void install_min_serial() {
HAL_min_serial_init = &TXBegin;
HAL_min_serial_out = &TX;
}
#if DISABLED(DYNAMIC_VECTORTABLE)
extern "C" {
__attribute__((naked)) void JumpHandler_ASM() {
__asm__ __volatile__ (
"b CommonHandler_ASM\n"
);
}
void __attribute__((naked, alias("JumpHandler_ASM"))) HardFault_Handler();
void __attribute__((naked, alias("JumpHandler_ASM"))) BusFault_Handler();
void __attribute__((naked, alias("JumpHandler_ASM"))) UsageFault_Handler();
void __attribute__((naked, alias("JumpHandler_ASM"))) MemManage_Handler();
void __attribute__((naked, alias("JumpHandler_ASM"))) NMI_Handler();
}
#endif
#endif // POSTMORTEM_DEBUGGING
#endif // ARDUINO_ARCH_SAM

2
Marlin/src/HAL/DUE/inc/SanityCheck.h
View File

@ -57,5 +57,5 @@
#endif #endif
#if HAS_TMC_SW_SERIAL #if HAS_TMC_SW_SERIAL
#error "TMC220x Software Serial is not supported on this platform." #error "TMC220x Software Serial is not supported on the DUE platform."
#endif #endif

6
Marlin/src/HAL/ESP32/inc/SanityCheck.h
View File

@ -30,9 +30,13 @@
#endif #endif
#if HAS_TMC_SW_SERIAL #if HAS_TMC_SW_SERIAL
#error "TMC220x Software Serial is not supported on this platform." #error "TMC220x Software Serial is not supported on ESP32."
#endif #endif
#if BOTH(WIFISUPPORT, ESP3D_WIFISUPPORT) #if BOTH(WIFISUPPORT, ESP3D_WIFISUPPORT)
#error "Only enable one WiFi option, either WIFISUPPORT or ESP3D_WIFISUPPORT." #error "Only enable one WiFi option, either WIFISUPPORT or ESP3D_WIFISUPPORT."
#endif #endif
#if ENABLED(POSTMORTEM_DEBUGGING)
#error "POSTMORTEM_DEBUGGING is not yet supported on ESP32."
#endif

6
Marlin/src/HAL/LINUX/inc/SanityCheck.h
View File

@ -35,5 +35,9 @@
#endif #endif
#if HAS_TMC_SW_SERIAL #if HAS_TMC_SW_SERIAL
#error "TMC220x Software Serial is not supported on this platform." #error "TMC220x Software Serial is not supported on LINUX."
#endif
#if ENABLED(POSTMORTEM_DEBUGGING)
#error "POSTMORTEM_DEBUGGING is not yet supported on LINUX."
#endif #endif

322
Marlin/src/HAL/LPC1768/DebugMonitor.cpp
View File

@ -1,322 +0,0 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef TARGET_LPC1768
#include "../../core/macros.h"
#include "../../core/serial.h"
#include <stdarg.h>
#include "../shared/backtrace/unwinder.h"
#include "../shared/backtrace/unwmemaccess.h"
#include "watchdog.h"
#include <debug_frmwrk.h>
// Debug monitor that dumps to the Programming port all status when
// an exception or WDT timeout happens - And then resets the board
// All the Monitor routines must run with interrupts disabled and
// under an ISR execution context. That is why we cannot reuse the
// Serial interrupt routines or any C runtime, as we don't know the
// state we are when running them
// A SW memory barrier, to ensure GCC does not overoptimize loops
#define sw_barrier() __asm__ volatile("": : :"memory");
// (re)initialize UART0 as a monitor output to 250000,n,8,1
static void TXBegin() {
}
// Send character through UART with no interrupts
static void TX(char c) {
_DBC(c);
}
// Send String through UART
static void TX(const char* s) {
while (*s) TX(*s++);
}
static void TXDigit(uint32_t d) {
if (d < 10) TX((char)(d+'0'));
else if (d < 16) TX((char)(d+'A'-10));
else TX('?');
}
// Send Hex number thru UART
static void TXHex(uint32_t v) {
TX("0x");
for (uint8_t i = 0; i < 8; i++, v <<= 4)
TXDigit((v >> 28) & 0xF);
}
// Send Decimal number thru UART
static void TXDec(uint32_t v) {
if (!v) {
TX('0');
return;
}
char nbrs[14];
char *p = &nbrs[0];
while (v != 0) {
*p++ = '0' + (v % 10);
v /= 10;
}
do {
p--;
TX(*p);
} while (p != &nbrs[0]);
}
// Dump a backtrace entry
static bool UnwReportOut(void* ctx, const UnwReport* bte) {
int* p = (int*)ctx;
(*p)++;
TX('#'); TXDec(*p); TX(" : ");
TX(bte->name?bte->name:"unknown"); TX('@'); TXHex(bte->function);
TX('+'); TXDec(bte->address - bte->function);
TX(" PC:");TXHex(bte->address); TX('\n');
return true;
}
#ifdef UNW_DEBUG
void UnwPrintf(const char* format, ...) {
char dest[256];
va_list argptr;
va_start(argptr, format);
vsprintf(dest, format, argptr);
va_end(argptr);
TX(&dest[0]);
}
#endif
/* Table of function pointers for passing to the unwinder */
static const UnwindCallbacks UnwCallbacks = {
UnwReportOut,
UnwReadW,
UnwReadH,
UnwReadB
#ifdef UNW_DEBUG
,UnwPrintf
#endif
};
/**
* HardFaultHandler_C:
* This is called from the HardFault_HandlerAsm with a pointer the Fault stack
* as the parameter. We can then read the values from the stack and place them
* into local variables for ease of reading.
* We then read the various Fault Status and Address Registers to help decode
* cause of the fault.
* The function ends with a BKPT instruction to force control back into the debugger
*/
extern "C"
void HardFault_HandlerC(unsigned long *sp, unsigned long lr, unsigned long cause) {
static const char* causestr[] = {
"NMI","Hard","Mem","Bus","Usage","Debug","WDT","RSTC"
};
UnwindFrame btf;
// Dump report to the Programming port (interrupts are DISABLED)
TXBegin();
TX("\n\n## Software Fault detected ##\n");
TX("Cause: "); TX(causestr[cause]); TX('\n');
TX("R0 : "); TXHex(((unsigned long)sp[0])); TX('\n');
TX("R1 : "); TXHex(((unsigned long)sp[1])); TX('\n');
TX("R2 : "); TXHex(((unsigned long)sp[2])); TX('\n');
TX("R3 : "); TXHex(((unsigned long)sp[3])); TX('\n');
TX("R12 : "); TXHex(((unsigned long)sp[4])); TX('\n');
TX("LR : "); TXHex(((unsigned long)sp[5])); TX('\n');
TX("PC : "); TXHex(((unsigned long)sp[6])); TX('\n');
TX("PSR : "); TXHex(((unsigned long)sp[7])); TX('\n');
// Configurable Fault Status Register
// Consists of MMSR, BFSR and UFSR
TX("CFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED28)))); TX('\n');
// Hard Fault Status Register
TX("HFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED2C)))); TX('\n');
// Debug Fault Status Register
TX("DFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED30)))); TX('\n');
// Auxiliary Fault Status Register
TX("AFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED3C)))); TX('\n');
// Read the Fault Address Registers. These may not contain valid values.
// Check BFARVALID/MMARVALID to see if they are valid values
// MemManage Fault Address Register
TX("MMAR : "); TXHex((*((volatile unsigned long *)(0xE000ED34)))); TX('\n');
// Bus Fault Address Register
TX("BFAR : "); TXHex((*((volatile unsigned long *)(0xE000ED38)))); TX('\n');
TX("ExcLR: "); TXHex(lr); TX('\n');
TX("ExcSP: "); TXHex((unsigned long)sp); TX('\n');
btf.sp = ((unsigned long)sp) + 8*4; // The original stack pointer
btf.fp = btf.sp;
btf.lr = ((unsigned long)sp[5]);
btf.pc = ((unsigned long)sp[6]) | 1; // Force Thumb, as CORTEX only support it
// Perform a backtrace
TX("\nBacktrace:\n\n");
int ctr = 0;
UnwindStart(&btf, &UnwCallbacks, &ctr);
// Disable all NVIC interrupts
NVIC->ICER[0] = 0xFFFFFFFF;
NVIC->ICER[1] = 0xFFFFFFFF;
// Relocate VTOR table to default position
SCB->VTOR = 0;
// Clear cause of reset to prevent entering smoothie bootstrap
HAL_clear_reset_source();
// Restart watchdog
#if ENABLED(USE_WATCHDOG)
//WDT_Restart(WDT);
watchdog_init();
#endif
// Reset controller
NVIC_SystemReset();
// Nothing below here is compiled because NVIC_SystemReset loops forever
for (;;) { TERN_(USE_WATCHDOG, watchdog_init()); }
}
extern "C" {
__attribute__((naked)) void NMI_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#0")
A("b HardFault_HandlerC")
);
}
__attribute__((naked)) void HardFault_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#1")
A("b HardFault_HandlerC")
);
}
__attribute__((naked)) void MemManage_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#2")
A("b HardFault_HandlerC")
);
}
__attribute__((naked)) void BusFault_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#3")
A("b HardFault_HandlerC")
);
}
__attribute__((naked)) void UsageFault_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#4")
A("b HardFault_HandlerC")
);
}
__attribute__((naked)) void DebugMon_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#5")
A("b HardFault_HandlerC")
);
}
/* This is NOT an exception, it is an interrupt handler - Nevertheless, the framing is the same */
__attribute__((naked)) void WDT_IRQHandler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#6")
A("b HardFault_HandlerC")
);
}
__attribute__((naked)) void RSTC_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#7")
A("b HardFault_HandlerC")
);
}
}
#endif // TARGET_LPC1768

50
Marlin/src/HAL/LPC1768/HAL_MinSerial.cpp Normal file
View File

@ -0,0 +1,50 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef TARGET_LPC1768
#include "HAL.h"
#if ENABLED(POSTMORTEM_DEBUGGING)
#include "../shared/HAL_MinSerial.h"
#include <debug_frmwrk.h>
static void TX(char c) { _DBC(c); }
void install_min_serial() { HAL_min_serial_out = &TX; }
#if DISABLED(DYNAMIC_VECTORTABLE)
extern "C" {
__attribute__((naked)) void JumpHandler_ASM() {
__asm__ __volatile__ (
"b CommonHandler_ASM\n"
);
}
void __attribute__((naked, alias("JumpHandler_ASM"))) HardFault_Handler();
void __attribute__((naked, alias("JumpHandler_ASM"))) BusFault_Handler();
void __attribute__((naked, alias("JumpHandler_ASM"))) UsageFault_Handler();
void __attribute__((naked, alias("JumpHandler_ASM"))) MemManage_Handler();
void __attribute__((naked, alias("JumpHandler_ASM"))) NMI_Handler();
}
#endif
#endif // POSTMORTEM_DEBUGGING
#endif // TARGET_LPC1768

4
Marlin/src/HAL/LPC1768/inc/SanityCheck.h
View File

@ -270,7 +270,7 @@ static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported o
#endif #endif
#if ENABLED(SERIAL_STATS_MAX_RX_QUEUED) #if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
#error "SERIAL_STATS_MAX_RX_QUEUED is not supported on this platform." #error "SERIAL_STATS_MAX_RX_QUEUED is not supported on LPC176x."
#elif ENABLED(SERIAL_STATS_DROPPED_RX) #elif ENABLED(SERIAL_STATS_DROPPED_RX)
#error "SERIAL_STATS_DROPPED_RX is not supported on this platform." #error "SERIAL_STATS_DROPPED_RX is not supported on LPX176x."
#endif #endif

8
Marlin/src/HAL/LPC1768/main.cpp
View File

@ -46,6 +46,8 @@ extern "C" {
void SysTick_Callback() { disk_timerproc(); } void SysTick_Callback() { disk_timerproc(); }
TERN_(POSTMORTEM_DEBUGGING, extern void install_min_serial());
void HAL_init() { void HAL_init() {
// Init LEDs // Init LEDs
@ -123,9 +125,7 @@ void HAL_init() {
delay(1000); // Give OS time to notice delay(1000); // Give OS time to notice
USB_Connect(true); USB_Connect(true);
#if HAS_SD_HOST_DRIVE TERN_(HAS_SD_HOST_DRIVE, MSC_SD_Init(0)); // Enable USB SD card access
MSC_SD_Init(0); // Enable USB SD card access
#endif
const millis_t usb_timeout = millis() + 2000; const millis_t usb_timeout = millis() + 2000;
while (!USB_Configuration && PENDING(millis(), usb_timeout)) { while (!USB_Configuration && PENDING(millis(), usb_timeout)) {
@ -137,6 +137,8 @@ void HAL_init() {
} }
HAL_timer_init(); HAL_timer_init();
TERN_(POSTMORTEM_DEBUGGING, install_min_serial()); // Install the min serial handler
} }
// HAL idle task // HAL idle task

4
Marlin/src/HAL/STM32/HAL.cpp
View File

@ -57,6 +57,8 @@ uint16_t HAL_adc_result;
// Public functions // Public functions
// ------------------------ // ------------------------
TERN_(POSTMORTEM_DEBUGGING, extern void install_min_serial());
// HAL initialization task // HAL initialization task
void HAL_init() { void HAL_init() {
FastIO_init(); FastIO_init();
@ -83,6 +85,8 @@ void HAL_init() {
USB_Hook_init(); USB_Hook_init();
#endif #endif
TERN_(POSTMORTEM_DEBUGGING, install_min_serial()); // Install the min serial handler
#if HAS_SD_HOST_DRIVE #if HAS_SD_HOST_DRIVE
MSC_SD_init(); // Enable USB SD card access MSC_SD_init(); // Enable USB SD card access
#endif #endif

152
Marlin/src/HAL/STM32/HAL_MinSerial.cpp Normal file
View File

@ -0,0 +1,152 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (c) 2017 Victor Perez
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(POSTMORTEM_DEBUGGING)
#include "../shared/HAL_MinSerial.h"
#include "watchdog.h"
/* Instruction Synchronization Barrier */
#define isb() __asm__ __volatile__ ("isb" : : : "memory")
/* Data Synchronization Barrier */
#define dsb() __asm__ __volatile__ ("dsb" : : : "memory")
// Dumb mapping over the registers of a USART device on STM32
struct USARTMin {
volatile uint32_t SR;
volatile uint32_t DR;
volatile uint32_t BRR;
volatile uint32_t CR1;
volatile uint32_t CR2;
};
#if WITHIN(SERIAL_PORT, 1, 6)
// Depending on the CPU, the serial port is different for USART1
static const uintptr_t regsAddr[] = {
TERN(STM32F1xx, 0x40013800, 0x40011000), // USART1
0x40004400, // USART2
0x40004800, // USART3
0x40004C00, // UART4_BASE
0x40005000, // UART5_BASE
0x40011400 // USART6
};
static USARTMin * regs = (USARTMin*)regsAddr[SERIAL_PORT - 1];
#endif
static void TXBegin() {
#if !WITHIN(SERIAL_PORT, 1, 6)
#warning "Using POSTMORTEM_DEBUGGING requires a physical U(S)ART hardware in case of severe error."
#warning "Disabling the severe error reporting feature currently because the used serial port is not a HW port."
#else
// This is common between STM32F1/STM32F2 and STM32F4
const int nvicUART[] = { /* NVIC_USART1 */ 37, /* NVIC_USART2 */ 38, /* NVIC_USART3 */ 39, /* NVIC_UART4 */ 52, /* NVIC_UART5 */ 53, /* NVIC_USART6 */ 71 };
int nvicIndex = nvicUART[SERIAL_PORT - 1];
struct NVICMin {
volatile uint32_t ISER[32];
volatile uint32_t ICER[32];
};
NVICMin * nvicBase = (NVICMin*)0xE000E100;
nvicBase->ICER[nvicIndex / 32] |= _BV32(nvicIndex % 32);
// We NEED memory barriers to ensure Interrupts are actually disabled!
// ( https://dzone.com/articles/nvic-disabling-interrupts-on-arm-cortex-m-and-the )
dsb();
isb();
// Example for USART1 disable: (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN))
// Too difficult to reimplement here, let's query the STM32duino macro here
#if SERIAL_PORT == 1
__HAL_RCC_USART1_CLK_DISABLE();
__HAL_RCC_USART1_CLK_ENABLE();
#elif SERIAL_PORT == 2
__HAL_RCC_USART2_CLK_DISABLE();
__HAL_RCC_USART2_CLK_ENABLE();
#elif SERIAL_PORT == 3
__HAL_RCC_USART3_CLK_DISABLE();
__HAL_RCC_USART3_CLK_ENABLE();
#elif SERIAL_PORT == 4
__HAL_RCC_UART4_CLK_DISABLE(); // BEWARE: UART4 and not USART4 here
__HAL_RCC_UART4_CLK_ENABLE();
#elif SERIAL_PORT == 5
__HAL_RCC_UART5_CLK_DISABLE(); // BEWARE: UART5 and not USART5 here
__HAL_RCC_UART5_CLK_ENABLE();
#elif SERIAL_PORT == 6
__HAL_RCC_USART6_CLK_DISABLE();
__HAL_RCC_USART6_CLK_ENABLE();
#endif
uint32_t brr = regs->BRR;
regs->CR1 = 0; // Reset the USART
regs->CR2 = 0; // 1 stop bit
// If we don't touch the BRR (baudrate register), we don't need to recompute.
regs->BRR = brr;
regs->CR1 = _BV(3) | _BV(13); // 8 bits, no parity, 1 stop bit (TE | UE)
#endif
}
// A SW memory barrier, to ensure GCC does not overoptimize loops
#define sw_barrier() __asm__ volatile("": : :"memory");
static void TX(char c) {
#if WITHIN(SERIAL_PORT, 1, 6)
constexpr uint32_t usart_sr_txe = _BV(7);
while (!(regs->SR & usart_sr_txe)) {
TERN_(USE_WATCHDOG, HAL_watchdog_refresh());
sw_barrier();
}
regs->DR = c;
#else
// Let's hope a mystical guru will fix this, one day by writting interrupt-free USB CDC ACM code (or, at least, by polling the registers since interrupt will be queued but will never trigger)
// For now, it's completely lost to oblivion.
#endif
}
void install_min_serial() {
HAL_min_serial_init = &TXBegin;
HAL_min_serial_out = &TX;
}
#if DISABLED(DYNAMIC_VECTORTABLE) && DISABLED(STM32F0xx) // Cortex M0 can't jump to a symbol that's too far from the current function, so we work around this in exception_arm.cpp
extern "C" {
__attribute__((naked)) void JumpHandler_ASM() {
__asm__ __volatile__ (
"b CommonHandler_ASM\n"
);
}
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) HardFault_Handler();
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) BusFault_Handler();
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) UsageFault_Handler();
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) MemManage_Handler();
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) NMI_Handler();
}
#endif
#endif // POSTMORTEM_DEBUGGING
#endif // ARDUINO_ARCH_STM32

4
Marlin/src/HAL/STM32/inc/SanityCheck.h
View File

@ -47,9 +47,9 @@
#endif #endif
#if ENABLED(SERIAL_STATS_MAX_RX_QUEUED) #if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
#error "SERIAL_STATS_MAX_RX_QUEUED is not supported on this platform." #error "SERIAL_STATS_MAX_RX_QUEUED is not supported on STM32."
#elif ENABLED(SERIAL_STATS_DROPPED_RX) #elif ENABLED(SERIAL_STATS_DROPPED_RX)
#error "SERIAL_STATS_DROPPED_RX is not supported on this platform." #error "SERIAL_STATS_DROPPED_RX is not supported on STM32."
#endif #endif
#if ANY(TFT_COLOR_UI, TFT_LVGL_UI, TFT_CLASSIC_UI) && NOT_TARGET(STM32F4xx, STM32F1xx) #if ANY(TFT_COLOR_UI, TFT_LVGL_UI, TFT_CLASSIC_UI) && NOT_TARGET(STM32F4xx, STM32F1xx)

3
Marlin/src/HAL/STM32F1/HAL.cpp
View File

@ -272,6 +272,8 @@ static void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) {
} } } }
#endif #endif
TERN_(POSTMORTEM_DEBUGGING, extern void install_min_serial());
void HAL_init() { void HAL_init() {
NVIC_SetPriorityGrouping(0x3); NVIC_SetPriorityGrouping(0x3);
#if PIN_EXISTS(LED) #if PIN_EXISTS(LED)
@ -287,6 +289,7 @@ void HAL_init() {
delay(1000); // Give OS time to notice delay(1000); // Give OS time to notice
OUT_WRITE(USB_CONNECT_PIN, USB_CONNECT_INVERTING); OUT_WRITE(USB_CONNECT_PIN, USB_CONNECT_INVERTING);
#endif #endif
TERN_(POSTMORTEM_DEBUGGING, install_min_serial()); // Install the minimal serial handler
} }
// HAL idle task // HAL idle task

118
Marlin/src/HAL/STM32F1/HAL_MinSerial.cpp Normal file
View File

@ -0,0 +1,118 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (c) 2017 Victor Perez
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef __STM32F1__
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(POSTMORTEM_DEBUGGING)
#include "../shared/HAL_MinSerial.h"
#include "watchdog.h"
#include <libmaple/usart.h>
#include <libmaple/rcc.h>
#include <libmaple/nvic.h>
/* Instruction Synchronization Barrier */
#define isb() __asm__ __volatile__ ("isb" : : : "memory")
/* Data Synchronization Barrier */
#define dsb() __asm__ __volatile__ ("dsb" : : : "memory")
static void TXBegin() {
#if !WITHIN(SERIAL_PORT, 1, 6)
#warning "Using POSTMORTEM_DEBUGGING requires a physical U(S)ART hardware in case of severe error."
#warning "Disabling the severe error reporting feature currently because the used serial port is not a HW port."
#else
// We use MYSERIAL0 here, so we need to figure out how to get the linked register
struct usart_dev* dev = MYSERIAL0.c_dev();
// Or use this if removing libmaple
// int irq = dev->irq_num;
// int nvicUART[] = { NVIC_USART1 /* = 37 */, NVIC_USART2 /* = 38 */, NVIC_USART3 /* = 39 */, NVIC_UART4 /* = 52 */, NVIC_UART5 /* = 53 */ };
// Disabling irq means setting the bit in the NVIC ICER register located at
// Disable UART interrupt in NVIC
nvic_irq_disable(dev->irq_num);
// Use this if removing libmaple
//NVIC_BASE->ICER[1] |= _BV(irq - 32);
// We NEED memory barriers to ensure Interrupts are actually disabled!
// ( https://dzone.com/articles/nvic-disabling-interrupts-on-arm-cortex-m-and-the )
dsb();
isb();
rcc_clk_disable(dev->clk_id);
rcc_clk_enable(dev->clk_id);
usart_reg_map *regs = dev->regs;
regs->CR1 = 0; // Reset the USART
regs->CR2 = 0; // 1 stop bit
// If we don't touch the BRR (baudrate register), we don't need to recompute. Else we would need to call
usart_set_baud_rate(dev, 0, BAUDRATE);
regs->CR1 = (USART_CR1_TE | USART_CR1_UE); // 8 bits, no parity, 1 stop bit
#endif
}
// A SW memory barrier, to ensure GCC does not overoptimize loops
#define sw_barrier() __asm__ volatile("": : :"memory");
static void TX(char c) {
#if WITHIN(SERIAL_PORT, 1, 6)
struct usart_dev* dev = MYSERIAL0.c_dev();
while (!(dev->regs->SR & USART_SR_TXE)) {
TERN_(USE_WATCHDOG, HAL_watchdog_refresh());
sw_barrier();
}
dev->regs->DR = c;
#endif
}
void install_min_serial() {
HAL_min_serial_init = &TXBegin;
HAL_min_serial_out = &TX;
}
#if DISABLED(DYNAMIC_VECTORTABLE) && DISABLED(STM32F0xx) // Cortex M0 can't branch to a symbol that's too far, so we have a specific hack for them
extern "C" {
__attribute__((naked)) void JumpHandler_ASM() {
__asm__ __volatile__ (
"b CommonHandler_ASM\n"
);
}
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) __exc_hardfault();
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) __exc_busfault();
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) __exc_usagefault();
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) __exc_memmanage();
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) __exc_nmi();
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) __stm32reservedexception7();
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) __stm32reservedexception8();
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) __stm32reservedexception9();
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) __stm32reservedexception10();
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) __stm32reservedexception13();
}
#endif
#endif // POSTMORTEM_DEBUGGING
#endif // __STM32F1__

4
Marlin/src/HAL/STM32F1/inc/SanityCheck.h
View File

@ -34,9 +34,9 @@
#endif #endif
#if ENABLED(SERIAL_STATS_MAX_RX_QUEUED) #if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
#error "SERIAL_STATS_MAX_RX_QUEUED is not supported on this platform." #error "SERIAL_STATS_MAX_RX_QUEUED is not supported on the STM32F1 platform."
#elif ENABLED(SERIAL_STATS_DROPPED_RX) #elif ENABLED(SERIAL_STATS_DROPPED_RX)
#error "SERIAL_STATS_DROPPED_RX is not supported on this platform." #error "SERIAL_STATS_DROPPED_RX is not supported on the STM32F1 platform."
#endif #endif
#if ENABLED(NEOPIXEL_LED) #if ENABLED(NEOPIXEL_LED)

6
Marlin/src/HAL/TEENSY31_32/inc/SanityCheck.h
View File

@ -34,5 +34,9 @@
#endif #endif
#if HAS_TMC_SW_SERIAL #if HAS_TMC_SW_SERIAL
#error "TMC220x Software Serial is not supported on this platform." #error "TMC220x Software Serial is not supported on Teensy 3.1/3.2."
#endif
#if ENABLED(POSTMORTEM_DEBUGGING)
#error "POSTMORTEM_DEBUGGING is not yet supported on Teensy 3.1/3.2."
#endif #endif

6
Marlin/src/HAL/TEENSY35_36/inc/SanityCheck.h
View File

@ -34,5 +34,9 @@
#endif #endif
#if HAS_TMC_SW_SERIAL #if HAS_TMC_SW_SERIAL
#error "TMC220x Software Serial is not supported on this platform." #error "TMC220x Software Serial is not supported on Teensy 3.5/3.6."
#endif
#if ENABLED(POSTMORTEM_DEBUGGING)
#error "POSTMORTEM_DEBUGGING is not yet supported on Teensy 3.5/3.6."
#endif #endif

6
Marlin/src/HAL/TEENSY40_41/inc/SanityCheck.h
View File

@ -34,5 +34,9 @@
#endif #endif
#if HAS_TMC_SW_SERIAL #if HAS_TMC_SW_SERIAL
#error "TMC220x Software Serial is not supported on this platform." #error "TMC220x Software Serial is not supported on Teensy 4.0/4.1."
#endif
#if ENABLED(POSTMORTEM_DEBUGGING)
#error "POSTMORTEM_DEBUGGING is not yet supported on Teensy 4.0/4.1."
#endif #endif

33
Marlin/src/HAL/shared/HAL_MinSerial.cpp Normal file
View File

@ -0,0 +1,33 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "HAL_MinSerial.h"
#if ENABLED(POSTMORTEM_DEBUGGING)
void HAL_min_serial_init_default() {}
void HAL_min_serial_out_default(char ch) { SERIAL_CHAR(ch); }
void (*HAL_min_serial_init)() = &HAL_min_serial_init_default;
void (*HAL_min_serial_out)(char) = &HAL_min_serial_out_default;
bool MinSerial::force_using_default_output = false;
#endif

79
Marlin/src/HAL/shared/HAL_MinSerial.h Normal file
View File

@ -0,0 +1,79 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "../../core/serial.h"
#include <stdint.h>
// Serial stuff here
// Inside an exception handler, the CPU state is not safe, we can't expect the handler to resume
// and the software to continue. UART communication can't rely on later callback/interrupt as it might never happen.
// So, you need to provide some method to send one byte to the usual UART with the interrupts disabled
// By default, the method uses SERIAL_CHAR but it's 100% guaranteed to break (couldn't be worse than nothing...)7
extern void (*HAL_min_serial_init)();
extern void (*HAL_min_serial_out)(char ch);
struct MinSerial {
static bool force_using_default_output;
// Serial output
static void TX(char ch) {
if (force_using_default_output)
SERIAL_CHAR(ch);
else
HAL_min_serial_out(ch);
}
// Send String through UART
static void TX(const char* s) { while (*s) TX(*s++); }
// Send a digit through UART
static void TXDigit(uint32_t d) {
if (d < 10) TX((char)(d+'0'));
else if (d < 16) TX((char)(d+'A'-10));
else TX('?');
}
// Send Hex number through UART
static void TXHex(uint32_t v) {
TX("0x");
for (uint8_t i = 0; i < 8; i++, v <<= 4)
TXDigit((v >> 28) & 0xF);
}
// Send Decimal number through UART
static void TXDec(uint32_t v) {
if (!v) {
TX('0');
return;
}
char nbrs[14];
char *p = &nbrs[0];
while (v != 0) {
*p++ = '0' + (v % 10);
v /= 10;
}
do {
p--;
TX(*p);
} while (p != &nbrs[0]);
}
static void init() { if (!force_using_default_output) HAL_min_serial_init(); }
};

28
Marlin/src/HAL/shared/backtrace/backtrace.cpp
View File

@ -25,7 +25,7 @@
#include "unwinder.h" #include "unwinder.h"
#include "unwmemaccess.h" #include "unwmemaccess.h"
#include "../../../core/serial.h" #include "../HAL_MinSerial.h"
#include <stdarg.h> #include <stdarg.h>
// Dump a backtrace entry // Dump a backtrace entry
@ -34,10 +34,12 @@ static bool UnwReportOut(void* ctx, const UnwReport* bte) {
(*p)++; (*p)++;
SERIAL_CHAR('#'); SERIAL_ECHO(*p); SERIAL_ECHOPGM(" : "); const uint32_t a = bte->address, f = bte->function;
SERIAL_ECHOPGM(bte->name ? bte->name : "unknown"); SERIAL_ECHOPGM("@0x"); SERIAL_PRINT(bte->function, PrintBase::Hex); MinSerial::TX('#'); MinSerial::TXDec(*p); MinSerial::TX(" : ");
SERIAL_CHAR('+'); SERIAL_ECHO(bte->address - bte->function); MinSerial::TX(bte->name?:"unknown"); MinSerial::TX('@'); MinSerial::TXHex(f);
SERIAL_ECHOPGM(" PC:"); SERIAL_PRINT(bte->address, PrintBase::Hex); SERIAL_CHAR('\n'); MinSerial::TX('+'); MinSerial::TXDec(a - f);
MinSerial::TX(" PC:"); MinSerial::TXHex(a);
MinSerial::TX('\n');
return true; return true;
} }
@ -48,7 +50,7 @@ static bool UnwReportOut(void* ctx, const UnwReport* bte) {
va_start(argptr, format); va_start(argptr, format);
vsprintf(dest, format, argptr); vsprintf(dest, format, argptr);
va_end(argptr); va_end(argptr);
TX(&dest[0]); MinSerial::TX(&dest[0]);
} }
#endif #endif
@ -63,10 +65,10 @@ static const UnwindCallbacks UnwCallbacks = {
#endif #endif
}; };
// Perform a backtrace to the serial port
void backtrace() { void backtrace() {
UnwindFrame btf; unsigned long sp = 0, lr = 0, pc = 0;
uint32_t sp = 0, lr = 0, pc = 0;
// Capture the values of the registers to perform the traceback // Capture the values of the registers to perform the traceback
__asm__ __volatile__ ( __asm__ __volatile__ (
@ -79,6 +81,12 @@ void backtrace() {
:: ::
); );
backtrace_ex(sp, lr, pc);
}
void backtrace_ex(unsigned long sp, unsigned long lr, unsigned long pc) {
UnwindFrame btf;
// Fill the traceback structure // Fill the traceback structure
btf.sp = sp; btf.sp = sp;
btf.fp = btf.sp; btf.fp = btf.sp;
@ -86,7 +94,7 @@ void backtrace() {
btf.pc = pc | 1; // Force Thumb, as CORTEX only support it btf.pc = pc | 1; // Force Thumb, as CORTEX only support it
// Perform a backtrace // Perform a backtrace
SERIAL_ERROR_MSG("Backtrace:"); MinSerial::TX("Backtrace:");
int ctr = 0; int ctr = 0;
UnwindStart(&btf, &UnwCallbacks, &ctr); UnwindStart(&btf, &UnwCallbacks, &ctr);
} }
@ -95,4 +103,4 @@ void backtrace() {
void backtrace() {} void backtrace() {}
#endif #endif // __arm__ || __thumb__

3
Marlin/src/HAL/shared/backtrace/backtrace.h
View File

@ -23,3 +23,6 @@
// Perform a backtrace to the serial port // Perform a backtrace to the serial port
void backtrace(); void backtrace();
// Perform a backtrace to the serial port
void backtrace_ex(unsigned long sp, unsigned long lr, unsigned long pc);

58
Marlin/src/HAL/shared/backtrace/unwmemaccess.cpp
View File

@ -41,27 +41,16 @@
#define START_FLASH_ADDR 0x00000000 #define START_FLASH_ADDR 0x00000000
#define END_FLASH_ADDR 0x00080000 #define END_FLASH_ADDR 0x00080000
#elif 0
// For STM32F103CBT6
// SRAM (0x20000000 - 0x20005000) (20kb)
// FLASH (0x00000000 - 0x00020000) (128kb)
//
#define START_SRAM_ADDR 0x20000000
#define END_SRAM_ADDR 0x20005000
#define START_FLASH_ADDR 0x00000000
#define END_FLASH_ADDR 0x00020000
#elif defined(__STM32F1__) || defined(STM32F1xx) || defined(STM32F0xx) #elif defined(__STM32F1__) || defined(STM32F1xx) || defined(STM32F0xx)
// For STM32F103ZET6/STM32F103VET6/STM32F0xx // For STM32F103ZET6/STM32F103VET6/STM32F0xx
// SRAM (0x20000000 - 0x20010000) (64kb) // SRAM (0x20000000 - 0x20010000) (64kb)
// FLASH (0x00000000 - 0x00080000) (512kb) // FLASH (0x08000000 - 0x08080000) (512kb)
// //
#define START_SRAM_ADDR 0x20000000 #define START_SRAM_ADDR 0x20000000
#define END_SRAM_ADDR 0x20010000 #define END_SRAM_ADDR 0x20010000
#define START_FLASH_ADDR 0x00000000 #define START_FLASH_ADDR 0x08000000
#define END_FLASH_ADDR 0x00080000 #define END_FLASH_ADDR 0x08080000
#elif defined(STM32F4) || defined(STM32F4xx) #elif defined(STM32F4) || defined(STM32F4xx)
@ -142,9 +131,45 @@
#define START_FLASH_ADDR 0x00000000 #define START_FLASH_ADDR 0x00000000
#define END_FLASH_ADDR 0x00100000 #define END_FLASH_ADDR 0x00100000
#else
// Generic ARM code, that's testing if an access to the given address would cause a fault or not
// It can't guarantee an address is in RAM or Flash only, but we usually don't care
#define NVIC_FAULT_STAT 0xE000ED28 // Configurable Fault Status Reg.
#define NVIC_CFG_CTRL 0xE000ED14 // Configuration Control Register
#define NVIC_FAULT_STAT_BFARV 0x00008000 // BFAR is valid
#define NVIC_CFG_CTRL_BFHFNMIGN 0x00000100 // Ignore bus fault in NMI/fault
#define HW_REG(X) (*((volatile unsigned long *)(X)))
static bool validate_addr(uint32_t read_address) {
bool works = true;
uint32_t intDisabled = 0;
// Read current interrupt state
__asm__ __volatile__ ("MRS %[result], PRIMASK\n\t" : [result]"=r"(intDisabled) :: ); // 0 is int enabled, 1 for disabled
// Clear bus fault indicator first (write 1 to clear)
HW_REG(NVIC_FAULT_STAT) |= NVIC_FAULT_STAT_BFARV;
// Ignore bus fault interrupt
HW_REG(NVIC_CFG_CTRL) |= NVIC_CFG_CTRL_BFHFNMIGN;
// Disable interrupts if not disabled previously
if (!intDisabled) __asm__ __volatile__ ("CPSID f");
// Probe address
*(volatile uint32_t*)read_address;
// Check if a fault happened
if ((HW_REG(NVIC_FAULT_STAT) & NVIC_FAULT_STAT_BFARV) != 0)
works = false;
// Enable interrupts again if previously disabled
if (!intDisabled) __asm__ __volatile__ ("CPSIE f");
// Enable fault interrupt flag
HW_REG(NVIC_CFG_CTRL) &= ~NVIC_CFG_CTRL_BFHFNMIGN;
return works;
}
#endif #endif
static bool validate_addr(uint32_t addr) { #ifdef START_SRAM_ADDR
static bool validate_addr(uint32_t addr) {
// Address must be in SRAM range // Address must be in SRAM range
if (addr >= START_SRAM_ADDR && addr < END_SRAM_ADDR) if (addr >= START_SRAM_ADDR && addr < END_SRAM_ADDR)
@ -155,7 +180,8 @@ static bool validate_addr(uint32_t addr) {
return true; return true;
return false; return false;
} }
#endif
bool UnwReadW(const uint32_t a, uint32_t *v) { bool UnwReadW(const uint32_t a, uint32_t *v) {
if (!validate_addr(a)) if (!validate_addr(a))

379
Marlin/src/HAL/shared/cpu_exception/exception_arm.cpp Normal file
View File

@ -0,0 +1,379 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (c) 2020 Cyril Russo
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/***************************************************************************
* ARM CPU Exception handler
***************************************************************************/
#if defined(__arm__) || defined(__thumb__)
/*
On ARM CPUs exception handling is quite powerful.
By default, upon a crash, the CPU enters the handlers that have a higher priority than any other interrupts,
so, in effect, no (real) interrupt can "interrupt" the handler (it's acting like if interrupts were disabled).
If the handler is not called as re-entrant (that is, if the crash is not happening inside an interrupt or an handler),
then it'll patch the return address to a dumping function (resume_from_fault) and save the crash state.
The CPU will exit the handler and, as such, re-allow the other interrupts, and jump to the dumping function.
In this function, the usual serial port (USB / HW) will be used to dump the crash (no special configuration required).
The only case where it requires hardware UART is when it's crashing in an interrupt or a crash handler.
In that case, instead of returning to the resume_from_fault function (and thus, re-enabling interrupts),
it jumps to this function directly (so with interrupts disabled), after changing the behavior of the serial output
wrapper to use the HW uart (and in effect, calling MinSerial::init which triggers a warning if you are using
a USB serial port).
In the case you have a USB serial port, this part will be disabled, and only that part (so that's the reason for
the warning).
This means that you can't have a crash report if the crash happens in an interrupt or an handler if you are using
a USB serial port since it's physically impossible.
You will get a crash report in all other cases.
*/
#include "exception_hook.h"
#include "../backtrace/backtrace.h"
#include "../HAL_MinSerial.h"
#define HW_REG(X) (*((volatile unsigned long *)(X)))
// Default function use the CPU VTOR register to get the vector table.
// Accessing the CPU VTOR register is done in assembly since it's the only way that's common to all current tool
unsigned long get_vtor() { return HW_REG(0xE000ED08); } // Even if it looks like an error, it is not an error
void * hook_get_hardfault_vector_address(unsigned vtor) { return (void*)(vtor + 0x03); }
void * hook_get_memfault_vector_address(unsigned vtor) { return (void*)(vtor + 0x04); }
void * hook_get_busfault_vector_address(unsigned vtor) { return (void*)(vtor + 0x05); }
void * hook_get_usagefault_vector_address(unsigned vtor) { return (void*)(vtor + 0x06); }
void * hook_get_reserved_vector_address(unsigned vtor) { return (void*)(vtor + 0x07); }
// Common exception frame for ARM, should work for all ARM CPU
// Described here (modified for convenience): https://interrupt.memfault.com/blog/cortex-m-fault-debug
struct __attribute__((packed)) ContextStateFrame {
uint32_t r0;
uint32_t r1;
uint32_t r2;
uint32_t r3;
uint32_t r12;
uint32_t lr;
uint32_t pc;
uint32_t xpsr;
};
struct __attribute__((packed)) ContextSavedFrame {
uint32_t R0;
uint32_t R1;
uint32_t R2;
uint32_t R3;
uint32_t R12;
uint32_t LR;
uint32_t PC;
uint32_t XPSR;
uint32_t CFSR;
uint32_t HFSR;
uint32_t DFSR;
uint32_t AFSR;
uint32_t MMAR;
uint32_t BFAR;
uint32_t ESP;
uint32_t ELR;
};
#if DISABLED(STM32F0xx)
extern "C"
__attribute__((naked)) void CommonHandler_ASM() {
__asm__ __volatile__ (
// Bit 2 of LR tells which stack pointer to use (either main or process, only main should be used anyway)
"tst lr, #4\n"
"ite eq\n"
"mrseq r0, msp\n"
"mrsne r0, psp\n"
// Save the LR in use when being interrupted
"mov r1, lr\n"
// Get the exception number from the ICSR register
"ldr r2, =0xE000ED00\n"
"ldr r2, [r2, #4]\n"
"b CommonHandler_C\n"
);
}
#else // Cortex M0 does not support conditional mov and testing with a constant, so let's have a specific handler for it
extern "C"
__attribute__((naked)) void CommonHandler_ASM() {
__asm__ __volatile__ (
".syntax unified\n"
// Save the LR in use when being interrupted
"mov r1, lr\n"
// Get the exception number from the ICSR register
"ldr r2, =0xE000ED00\n"
"ldr r2, [r2, #4]\n"
"movs r0, #4\n"
"tst r1, r0\n"
"beq _MSP\n"
"mrs r0, psp\n"
"b CommonHandler_C\n"
"_MSP:\n"
"mrs r0, msp\n"
"b CommonHandler_C\n"
);
}
#if DISABLED(DYNAMIC_VECTORTABLE) // Cortex M0 requires the handler's address to be within 32kB to the actual function to be able to branch to it
extern "C" {
void __attribute__((naked, alias("CommonHandler_ASM"), nothrow)) __exc_hardfault();
void __attribute__((naked, alias("CommonHandler_ASM"), nothrow)) __exc_busfault();
void __attribute__((naked, alias("CommonHandler_ASM"), nothrow)) __exc_usagefault();
void __attribute__((naked, alias("CommonHandler_ASM"), nothrow)) __exc_memmanage();
void __attribute__((naked, alias("CommonHandler_ASM"), nothrow)) __exc_nmi();
void __attribute__((naked, alias("CommonHandler_ASM"), nothrow)) __stm32reservedexception7();
void __attribute__((naked, alias("CommonHandler_ASM"), nothrow)) __stm32reservedexception8();
void __attribute__((naked, alias("CommonHandler_ASM"), nothrow)) __stm32reservedexception9();
void __attribute__((naked, alias("CommonHandler_ASM"), nothrow)) __stm32reservedexception10();
void __attribute__((naked, alias("CommonHandler_ASM"), nothrow)) __stm32reservedexception13();
}
//TODO When going off from libmaple, you'll need to replace those by the one from STM32/HAL_MinSerial.cpp
#endif
#endif
// Must be a macro to avoid creating a function frame
#define HALT_IF_DEBUGGING() \
do { \
if (HW_REG(0xE000EDF0) & _BV(0)) { \
__asm("bkpt 1"); \
} \
} while (0)
// Resume from a fault (if possible) so we can still use interrupt based code for serial output
// In that case, we will not jump back to the faulty code, but instead to a dumping code and then a
// basic loop with watchdog calling or manual resetting
static ContextSavedFrame savedFrame;
static uint8_t lastCause;
bool resume_from_fault() {
static const char* causestr[] = { "Thread", "Rsvd", "NMI", "Hard", "Mem", "Bus", "Usage", "7", "8", "9", "10", "SVC", "Dbg", "13", "PendSV", "SysTk", "IRQ" };
// Reinit the serial link (might only work if implemented in each of your boards)
MinSerial::init();
MinSerial::TX("\n\n## Software Fault detected ##\n");
MinSerial::TX("Cause: "); MinSerial::TX(causestr[min(lastCause, (uint8_t)16)]); MinSerial::TX('\n');
MinSerial::TX("R0 : "); MinSerial::TXHex(savedFrame.R0); MinSerial::TX('\n');
MinSerial::TX("R1 : "); MinSerial::TXHex(savedFrame.R1); MinSerial::TX('\n');
MinSerial::TX("R2 : "); MinSerial::TXHex(savedFrame.R2); MinSerial::TX('\n');
MinSerial::TX("R3 : "); MinSerial::TXHex(savedFrame.R3); MinSerial::TX('\n');
MinSerial::TX("R12 : "); MinSerial::TXHex(savedFrame.R12); MinSerial::TX('\n');
MinSerial::TX("LR : "); MinSerial::TXHex(savedFrame.LR); MinSerial::TX('\n');
MinSerial::TX("PC : "); MinSerial::TXHex(savedFrame.PC); MinSerial::TX('\n');
MinSerial::TX("PSR : "); MinSerial::TXHex(savedFrame.XPSR); MinSerial::TX('\n');
// Configurable Fault Status Register
// Consists of MMSR, BFSR and UFSR
MinSerial::TX("CFSR : "); MinSerial::TXHex(savedFrame.CFSR); MinSerial::TX('\n');
// Hard Fault Status Register
MinSerial::TX("HFSR : "); MinSerial::TXHex(savedFrame.HFSR); MinSerial::TX('\n');
// Debug Fault Status Register
MinSerial::TX("DFSR : "); MinSerial::TXHex(savedFrame.DFSR); MinSerial::TX('\n');
// Auxiliary Fault Status Register
MinSerial::TX("AFSR : "); MinSerial::TXHex(savedFrame.AFSR); MinSerial::TX('\n');
// Read the Fault Address Registers. These may not contain valid values.
// Check BFARVALID/MMARVALID to see if they are valid values
// MemManage Fault Address Register
MinSerial::TX("MMAR : "); MinSerial::TXHex(savedFrame.MMAR); MinSerial::TX('\n');
// Bus Fault Address Register
MinSerial::TX("BFAR : "); MinSerial::TXHex(savedFrame.BFAR); MinSerial::TX('\n');
MinSerial::TX("ExcLR: "); MinSerial::TXHex(savedFrame.ELR); MinSerial::TX('\n');
MinSerial::TX("ExcSP: "); MinSerial::TXHex(savedFrame.ESP); MinSerial::TX('\n');
// The stack pointer is pushed by 8 words upon entering an exception, so we need to revert this
backtrace_ex(savedFrame.ESP + 8*4, savedFrame.LR, savedFrame.PC);
// Call the last resort function here
hook_last_resort_func();
const uint32_t start = millis(), end = start + 100; // 100ms should be enough
// We need to wait for the serial buffers to be output but we don't know for how long
// So we'll just need to refresh the watchdog for a while and then stop for the system to reboot
uint32_t last = start;
while (PENDING(last, end)) {
watchdog_refresh();
while (millis() == last) { /* nada */ }
last = millis();
MinSerial::TX('.');
}
// Reset now by reinstantiating the bootloader's vector table
HW_REG(0xE000ED08) = 0;
// Restart watchdog
#if DISABLED(USE_WATCHDOG)
// No watchdog, let's perform ARMv7 reset instead by writing to AIRCR register with VECTKEY set to SYSRESETREQ
HW_REG(0xE000ED0C) = (HW_REG(0xE000ED0C) & 0x0000FFFF) | 0x05FA0004;
#endif
while(1) {} // Bad luck, nothing worked
}
// Make sure the compiler does not optimize the frame argument away
extern "C"
__attribute__((optimize("O0")))
void CommonHandler_C(ContextStateFrame * frame, unsigned long lr, unsigned long cause) {
// If you are using it'll stop here
HALT_IF_DEBUGGING();
// Save the state to backtrace later on (don't call memcpy here since the stack can be corrupted)
savedFrame.R0 = frame->r0;
savedFrame.R1 = frame->r1;
savedFrame.R2 = frame->r2;
savedFrame.R3 = frame->r3;
savedFrame.R12 = frame->r12;
savedFrame.LR = frame->lr;
savedFrame.PC = frame->pc;
savedFrame.XPSR= frame->xpsr;
lastCause = cause & 0x1FF;
volatile uint32_t &CFSR = HW_REG(0xE000ED28);
savedFrame.CFSR = CFSR;
savedFrame.HFSR = HW_REG(0xE000ED2C);
savedFrame.DFSR = HW_REG(0xE000ED30);
savedFrame.AFSR = HW_REG(0xE000ED3C);
savedFrame.MMAR = HW_REG(0xE000ED34);
savedFrame.BFAR = HW_REG(0xE000ED38);
savedFrame.ESP = (unsigned long)frame; // Even on return, this should not be overwritten by the CPU
savedFrame.ELR = lr;
// First check if we can resume from this exception to our own handler safely
// If we can, then we don't need to disable interrupts and the usual serial code
// can be used
//const uint32_t non_usage_fault_mask = 0x0000FFFF;
//const bool non_usage_fault_occurred = (CFSR & non_usage_fault_mask) != 0;
// the bottom 8 bits of the xpsr hold the exception number of the
// executing exception or 0 if the processor is in Thread mode
const bool faulted_from_exception = ((frame->xpsr & 0xFF) != 0);
if (!faulted_from_exception) { // Not sure about the non_usage_fault, we want to try anyway, don't we ? && !non_usage_fault_occurred)
// Try to resume to our handler here
CFSR |= CFSR; // The ARM programmer manual says you must write to 1 all fault bits to clear them so this instruction is correct
// The frame will not be valid when returning anymore, let's clean it
savedFrame.CFSR = 0;
frame->pc = (uint32_t)resume_from_fault; // Patch where to return to
frame->lr = 0xdeadbeef; // If our handler returns (it shouldn't), let's make it trigger an exception immediately
frame->xpsr = _BV(24); // Need to clean the PSR register to thumb II only
MinSerial::force_using_default_output = true;
return; // The CPU will resume in our handler hopefully, and we'll try to use default serial output
}
// Sorry, we need to emergency code here since the fault is too dangerous to recover from
MinSerial::force_using_default_output = false;
resume_from_fault();
}
void hook_cpu_exceptions() {
#if ENABLED(DYNAMIC_VECTORTABLE)
// On ARM 32bits CPU, the vector table is like this:
// 0x0C => Hardfault
// 0x10 => MemFault
// 0x14 => BusFault
// 0x18 => UsageFault
// Unfortunately, it's usually run from flash, and we can't write to flash here directly to hook our instruction
// We could set an hardware breakpoint, and hook on the fly when it's being called, but this
// is hard to get right and would probably break debugger when attached
// So instead, we'll allocate a new vector table filled with the previous value except
// for the fault we are interested in.
// Now, comes the issue to figure out what is the current vector table size
// There is nothing telling us what is the vector table as it's per-cpu vendor specific.
// BUT: we are being called at the end of the setup, so we assume the setup is done
// Thus, we can read the current vector table until we find an address that's not in flash, and it would mark the
// end of the vector table (skipping the fist entry obviously)
// The position of the program in flash is expected to be at 0x08xxx xxxx on all known platform for ARM and the
// flash size is available via register 0x1FFFF7E0 on STM32 family, but it's not the case for all ARM boards
// (accessing this register might trigger a fault if it's not implemented).
// So we'll simply mask the top 8 bits of the first handler as an hint of being in the flash or not -that's poor and will
// probably break if the flash happens to be more than 128MB, but in this case, we are not magician, we need help from outside.
unsigned long * vecAddr = (unsigned long*)get_vtor();
SERIAL_ECHO("Vector table addr: ");
SERIAL_PRINTLN(get_vtor(), HEX);
#ifdef VECTOR_TABLE_SIZE
uint32_t vec_size = VECTOR_TABLE_SIZE;
alignas(128) static unsigned long vectable[VECTOR_TABLE_SIZE] ;
#else
#ifndef IS_IN_FLASH
#define IS_IN_FLASH(X) (((unsigned long)X & 0xFF000000) == 0x08000000)
#endif
// When searching for the end of the vector table, this acts as a limit not to overcome
#ifndef VECTOR_TABLE_SENTINEL
#define VECTOR_TABLE_SENTINEL 80
#endif
// Find the vector table size
uint32_t vec_size = 1;
while (IS_IN_FLASH(vecAddr[vec_size]) && vec_size < VECTOR_TABLE_SENTINEL)
vec_size++;
// We failed to find a valid vector table size, let's abort hooking up
if (vec_size == VECTOR_TABLE_SENTINEL) return;
// Poor method that's wasting RAM here, but allocating with malloc and alignment would be worst
// 128 bytes alignement is required for writing the VTOR register
alignas(128) static unsigned long vectable[VECTOR_TABLE_SENTINEL];
SERIAL_ECHO("Detected vector table size: ");
SERIAL_PRINTLN(vec_size, HEX);
#endif
uint32_t defaultFaultHandler = vecAddr[(unsigned)7];
// Copy the current vector table into the new table
for (uint32_t i = 0; i < vec_size; i++) {
vectable[i] = vecAddr[i];
// Replace all default handler by our own handler
if (vectable[i] == defaultFaultHandler)
vectable[i] = (unsigned long)&CommonHandler_ASM;
}
// Let's hook now with our functions
vectable[(unsigned long)hook_get_hardfault_vector_address(0)] = (unsigned long)&CommonHandler_ASM;
vectable[(unsigned long)hook_get_memfault_vector_address(0)] = (unsigned long)&CommonHandler_ASM;
vectable[(unsigned long)hook_get_busfault_vector_address(0)] = (unsigned long)&CommonHandler_ASM;
vectable[(unsigned long)hook_get_usagefault_vector_address(0)] = (unsigned long)&CommonHandler_ASM;
// Finally swap with our own vector table
// This is supposed to be atomic, but let's do that with interrupt disabled
HW_REG(0xE000ED08) = (unsigned long)vectable | _BV32(29); // 29th bit is for telling the CPU the table is now in SRAM (should be present already)
SERIAL_ECHOLN("Installed fault handlers");
#endif
}
#endif // __arm__ || __thumb__

28
Marlin/src/HAL/shared/cpu_exception/exception_hook.cpp Normal file
View File

@ -0,0 +1,28 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "exception_hook.h"
void * __attribute__((weak)) hook_get_hardfault_vector_address(unsigned) { return 0; }
void * __attribute__((weak)) hook_get_memfault_vector_address(unsigned) { return 0; }
void * __attribute__((weak)) hook_get_busfault_vector_address(unsigned) { return 0; }
void * __attribute__((weak)) hook_get_usagefault_vector_address(unsigned) { return 0; }
void __attribute__((weak)) hook_last_resort_func() {}

54
Marlin/src/HAL/shared/cpu_exception/exception_hook.h Normal file
View File

@ -0,0 +1,54 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/* Here is the expected behavior of a system producing a CPU exception with this hook installed:
1. Before the system is crashed
1.1 Upon validation (not done yet in this code, but we could be using DEBUG flags here to allow/disallow hooking)
1.2 Install the hook by overwriting the vector table exception handler with the hooked function
2. Upon system crash (for example, by a dereference of a NULL pointer or anything else)
2.1 The CPU triggers its exception and jump into the vector table for the exception type
2.2 Instead of finding the default handler, it finds the updated pointer to our hook
2.3 The CPU jumps into our hook function (likely a naked function to keep all information about crash point intact)
2.4 The hook (naked) function saves the important registers (stack pointer, program counter, current mode) and jumps to a common exception handler (in C)
2.5 The common exception handler dumps the registers on the serial link and perform a backtrace around the crashing point
2.6 Once the backtrace is performed the last resort function is called (platform specific).
On some platform with a LCD screen, this might display the crash information as a QR code or as text for the
user to capture by taking a picture
2.7 The CPU is reset and/or halted by triggering a debug breakpoint if a debugger is attached */
// Hook into CPU exception interrupt table to call the backtracing code upon an exception
// Most platform will simply do nothing here, but those who can will install/overwrite the default exception handler
// with a more performant exception handler
void hook_cpu_exceptions();
// Some platform might deal without a hard fault handler, in that case, return 0 in your platform here or skip implementing it
void * __attribute__((weak)) hook_get_hardfault_vector_address(unsigned base_address);
// Some platform might deal without a memory management fault handler, in that case, return 0 in your platform here or skip implementing it
void * __attribute__((weak)) hook_get_memfault_vector_address(unsigned base_address);
// Some platform might deal without a bus fault handler, in that case, return 0 in your platform here or skip implementing it
void * __attribute__((weak)) hook_get_busfault_vector_address(unsigned base_address);
// Some platform might deal without a usage fault handler, in that case, return 0 in your platform here or skip implementing it
void * __attribute__((weak)) hook_get_usagefault_vector_address(unsigned base_address);
// Last resort function that can be called after the exception handler was called.
void __attribute__((weak)) hook_last_resort_func();

3
Marlin/src/MarlinCore.cpp
View File

@ -36,6 +36,7 @@
#include "HAL/shared/Delay.h" #include "HAL/shared/Delay.h"
#include "HAL/shared/esp_wifi.h" #include "HAL/shared/esp_wifi.h"
#include "HAL/shared/cpu_exception/exception_hook.h"
#ifdef ARDUINO #ifdef ARDUINO
#include <pins_arduino.h> #include <pins_arduino.h>
@ -935,6 +936,8 @@ void setup() {
while (/*!WIFISERIAL && */PENDING(millis(), serial_connect_timeout)) { /*nada*/ } while (/*!WIFISERIAL && */PENDING(millis(), serial_connect_timeout)) { /*nada*/ }
#endif #endif
TERN_(DYNAMIC_VECTORTABLE, hook_cpu_exceptions()); // If supported, install Marlin exception handlers at runtime
SETUP_RUN(HAL_init()); SETUP_RUN(HAL_init());
// Init and disable SPI thermocouples; this is still needed // Init and disable SPI thermocouples; this is still needed

21
Marlin/src/gcode/gcode_d.cpp
View File

@ -152,8 +152,7 @@
NOMORE(len, FLASH_SIZE - addr); NOMORE(len, FLASH_SIZE - addr);
if (parser.seenval('X')) { if (parser.seenval('X')) {
// TODO: Write the hex bytes after the X // TODO: Write the hex bytes after the X
//while (len--) { //while (len--) {}
//}
} }
else { else {
// while (len--) { // while (len--) {
@ -180,7 +179,25 @@
for (int i = 10000; i--;) DELAY_US(1000UL); for (int i = 10000; i--;) DELAY_US(1000UL);
ENABLE_ISRS(); ENABLE_ISRS();
SERIAL_ECHOLNPGM("FAILURE: Watchdog did not trigger board reset."); SERIAL_ECHOLNPGM("FAILURE: Watchdog did not trigger board reset.");
} break;
#if ENABLED(POSTMORTEM_DEBUGGING)
case 451: { // Trigger all kind of faults to test exception catcher
SERIAL_ECHOLNPGM("Disabling heaters");
thermalManager.disable_all_heaters();
delay(1000); // Allow time to print
volatile uint8_t type[5] = { parser.byteval('T', 1) };
// The code below is obviously wrong and it's full of quirks to fool the compiler from optimizing away the code
switch (type[0]) {
case 1: default: *(int*)0 = 451; break; // Write at bad address
case 2: { volatile int a = 0; volatile int b = 452 / a; *(int*)&a = b; } break; // Divide by zero (some CPUs accept this, like ARM)
case 3: { *(uint32_t*)&type[1] = 453; volatile int a = *(int*)&type[1]; type[0] = a / 255; } break; // Unaligned access (some CPUs accept this)
case 4: { volatile void (*func)() = (volatile void (*)()) 0xE0000000; func(); } break; // Invalid instruction
} }
break;
}
#endif
} }
} }

104
buildroot/share/PlatformIO/scripts/exc.S Normal file
View File

@ -0,0 +1,104 @@
/* *****************************************************************************
* The MIT License
*
* Copyright (c) 2010 Perry Hung.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
* ****************************************************************************/
# On an exception, push a fake stack thread mode stack frame and redirect
# thread execution to a thread mode error handler
# From RM008:
# The SP is decremented by eight words by the completion of the stack push.
# Figure 5-1 shows the contents of the stack after an exception pre-empts the
# current program flow.
#
# Old SP--> <previous>
# xPSR
# PC
# LR
# r12
# r3
# r2
# r1
# SP--> r0
.text
.globl __exc_nmi
.weak __exc_nmi
.globl __exc_hardfault
.weak __exc_hardfault
.globl __exc_memmanage
.weak __exc_memmanage
.globl __exc_busfault
.weak __exc_busfault
.globl __exc_usagefault
.weak __exc_usagefault
.code 16
.thumb_func
__exc_nmi:
mov r0, #1
b __default_exc
.thumb_func
__exc_hardfault:
mov r0, #2
b __default_exc
.thumb_func
__exc_memmanage:
mov r0, #3
b __default_exc
.thumb_func
__exc_busfault:
mov r0, #4
b __default_exc
.thumb_func
__exc_usagefault:
mov r0, #5
b __default_exc
.thumb_func
__default_exc:
ldr r2, NVIC_CCR @ Enable returning to thread mode even if there are
mov r1 ,#1 @ pending exceptions. See flag NONEBASETHRDENA.
str r1, [r2]
cpsid i @ Disable global interrupts
ldr r2, SYSTICK_CSR @ Disable systick handler
mov r1, #0
str r1, [r2]
ldr r1, CPSR_MASK @ Set default CPSR
push {r1}
ldr r1, TARGET_PC @ Set target pc
push {r1}
sub sp, sp, #24 @ Don't care
ldr r1, EXC_RETURN @ Return to thread mode
mov lr, r1
bx lr @ Exception exit
.align 4
CPSR_MASK: .word 0x61000000
EXC_RETURN: .word 0xFFFFFFF9
TARGET_PC: .word __error
NVIC_CCR: .word 0xE000ED14 @ NVIC configuration control register
SYSTICK_CSR: .word 0xE000E010 @ Systick control register

29
buildroot/share/PlatformIO/scripts/fix_framework_weakness.py Normal file
View File

@ -0,0 +1,29 @@
from os.path import join, isfile
import shutil
from pprint import pprint
Import("env")
if env.MarlinFeatureIsEnabled("POSTMORTEM_DEBUGGING"):
FRAMEWORK_DIR = env.PioPlatform().get_package_dir("framework-arduinoststm32-maple")
patchflag_path = join(FRAMEWORK_DIR, ".exc-patching-done")
# patch file only if we didn't do it before
if not isfile(patchflag_path):
print("Patching libmaple exception handlers")
original_file = join(FRAMEWORK_DIR, "STM32F1", "cores", "maple", "libmaple", "exc.S")
backup_file = join(FRAMEWORK_DIR, "STM32F1", "cores", "maple", "libmaple", "exc.S.bak")
src_file = join("buildroot", "share", "PlatformIO", "scripts", "exc.S")
assert isfile(original_file) and isfile(src_file)
shutil.copyfile(original_file, backup_file)
shutil.copyfile(src_file, original_file);
def _touch(path):
with open(path, "w") as fp:
fp.write("")
env.Execute(lambda *args, **kwargs: _touch(patchflag_path))
print("Done patching exception handler")
print("Libmaple modified and ready for post mortem debugging")

42
platformio.ini
View File

@ -64,6 +64,7 @@ default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
-<src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp> -<src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp>
-<src/sd/cardreader.cpp> -<src/sd/Sd2Card.cpp> -<src/sd/SdBaseFile.cpp> -<src/sd/SdFatUtil.cpp> -<src/sd/SdFile.cpp> -<src/sd/SdVolume.cpp> -<src/gcode/sd> -<src/sd/cardreader.cpp> -<src/sd/Sd2Card.cpp> -<src/sd/SdBaseFile.cpp> -<src/sd/SdFatUtil.cpp> -<src/sd/SdFile.cpp> -<src/sd/SdVolume.cpp> -<src/gcode/sd>
-<src/HAL/shared/backtrace> -<src/HAL/shared/backtrace>
-<src/HAL/shared/cpu_exception>
-<src/HAL/shared/eeprom_if_i2c.cpp> -<src/HAL/shared/eeprom_if_i2c.cpp>
-<src/HAL/shared/eeprom_if_spi.cpp> -<src/HAL/shared/eeprom_if_spi.cpp>
-<src/feature/babystep.cpp> -<src/feature/babystep.cpp>
@ -223,6 +224,8 @@ YHCB2004 = red-scorp/LiquidCrystal_AIP31068@^1.0.4, red-scorp/Sof
HAS_TFT_LVGL_UI = lvgl=https://github.com/makerbase-mks/LVGL-6.1.1-MKS/archive/master.zip HAS_TFT_LVGL_UI = lvgl=https://github.com/makerbase-mks/LVGL-6.1.1-MKS/archive/master.zip
src_filter=+<src/lcd/extui/lib/mks_ui> src_filter=+<src/lcd/extui/lib/mks_ui>
extra_scripts=download_mks_assets.py extra_scripts=download_mks_assets.py
POSTMORTEM_DEBUGGING = src_filter=+<src/HAL/shared/cpu_exception> +<src/HAL/shared/backtrace>
build_flags=-funwind-tables
MKS_WIFI_MODULE = QRCode=https://github.com/makerbase-mks/QRCode/archive/master.zip MKS_WIFI_MODULE = QRCode=https://github.com/makerbase-mks/QRCode/archive/master.zip
HAS_TRINAMIC_CONFIG = TMCStepper@~0.7.1 HAS_TRINAMIC_CONFIG = TMCStepper@~0.7.1
src_filter=+<src/feature/tmc_util.cpp> +<src/module/stepper/trinamic.cpp> +<src/gcode/feature/trinamic/M122.cpp> +<src/gcode/feature/trinamic/M906.cpp> +<src/gcode/feature/trinamic/M911-M914.cpp> src_filter=+<src/feature/tmc_util.cpp> +<src/module/stepper/trinamic.cpp> +<src/gcode/feature/trinamic/M122.cpp> +<src/gcode/feature/trinamic/M906.cpp> +<src/gcode/feature/trinamic/M911-M914.cpp>
@ -637,14 +640,6 @@ platform = atmelsam
extends = env:DUE extends = env:DUE
board = dueUSB board = dueUSB
[env:DUE_debug]
# Used when WATCHDOG_RESET_MANUAL is enabled
platform = atmelsam
extends = env:DUE
build_flags = ${common.build_flags}
-funwind-tables
-mpoke-function-name
# #
# Archim SAM # Archim SAM
# #
@ -662,12 +657,6 @@ extra_scripts = ${common.extra_scripts}
platform = ${common_DUE_archim.platform} platform = ${common_DUE_archim.platform}
extends = common_DUE_archim extends = common_DUE_archim
# Used when WATCHDOG_RESET_MANUAL is enabled
[env:DUE_archim_debug]
platform = ${common_DUE_archim.platform}
extends = common_DUE_archim
build_flags = ${common_DUE_archim.build_flags} -funwind-tables -mpoke-function-name
################################# #################################
# # # #
# SAMD51 Architecture # # SAMD51 Architecture #
@ -763,6 +752,8 @@ lib_ignore = SPI, FreeRTOS701, FreeRTOS821
lib_deps = ${common.lib_deps} lib_deps = ${common.lib_deps}
SoftwareSerialM SoftwareSerialM
platform_packages = tool-stm32duino platform_packages = tool-stm32duino
extra_scripts = ${common.extra_scripts}
buildroot/share/PlatformIO/scripts/fix_framework_weakness.py
# #
# STM32F103RC # STM32F103RC
@ -788,7 +779,7 @@ build_flags = ${common_stm32f1.build_flags}
-DUSE_USB_COMPOSITE -DUSE_USB_COMPOSITE
-DVECT_TAB_OFFSET=0x2000 -DVECT_TAB_OFFSET=0x2000
-DGENERIC_BOOTLOADER -DGENERIC_BOOTLOADER
extra_scripts = ${common.extra_scripts} extra_scripts = ${common_stm32f1.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/STM32F1_create_variant.py pre:buildroot/share/PlatformIO/scripts/STM32F1_create_variant.py
buildroot/share/PlatformIO/scripts/STM32F103RC_MEEB_3DP.py buildroot/share/PlatformIO/scripts/STM32F103RC_MEEB_3DP.py
lib_deps = ${common.lib_deps} lib_deps = ${common.lib_deps}
@ -934,7 +925,7 @@ upload_protocol = serial
platform = ${common_stm32f1.platform} platform = ${common_stm32f1.platform}
extends = common_stm32f1 extends = common_stm32f1
board = genericSTM32F103VE board = genericSTM32F103VE
extra_scripts = ${common.extra_scripts} extra_scripts = ${common_stm32f1.extra_scripts}
buildroot/share/PlatformIO/scripts/STM32F103VE_longer.py buildroot/share/PlatformIO/scripts/STM32F103VE_longer.py
build_flags = ${common_stm32f1.build_flags} build_flags = ${common_stm32f1.build_flags}
-DMCU_STM32F103VE -DSTM32F1xx -USERIAL_USB -DU20 -DTS_V12 -DMCU_STM32F103VE -DSTM32F1xx -USERIAL_USB -DU20 -DTS_V12
@ -948,7 +939,7 @@ build_unflags = ${common_stm32f1.build_unflags}
platform = ${common_stm32f1.platform} platform = ${common_stm32f1.platform}
extends = common_stm32f1 extends = common_stm32f1
board = genericSTM32F103VE board = genericSTM32F103VE
extra_scripts = ${common.extra_scripts} extra_scripts = ${common_stm32f1.extra_scripts}
buildroot/share/PlatformIO/scripts/mks_robin_mini.py buildroot/share/PlatformIO/scripts/mks_robin_mini.py
build_flags = ${common_stm32f1.build_flags} build_flags = ${common_stm32f1.build_flags}
-DMCU_STM32F103VE -DMCU_STM32F103VE
@ -974,7 +965,7 @@ upload_protocol = jlink
platform = ${common_stm32f1.platform} platform = ${common_stm32f1.platform}
extends = common_stm32f1 extends = common_stm32f1
board = genericSTM32F103ZE board = genericSTM32F103ZE
extra_scripts = ${common.extra_scripts} extra_scripts = ${common_stm32f1.extra_scripts}
buildroot/share/PlatformIO/scripts/mks_robin.py buildroot/share/PlatformIO/scripts/mks_robin.py
build_flags = ${common_stm32f1.build_flags} build_flags = ${common_stm32f1.build_flags}
-DSS_TIMER=4 -DSTM32_XL_DENSITY -DSS_TIMER=4 -DSTM32_XL_DENSITY
@ -1008,7 +999,7 @@ lib_deps =
[env:mks_robin_pro] [env:mks_robin_pro]
platform = ${common_stm32f1.platform} platform = ${common_stm32f1.platform}
extends = env:mks_robin extends = env:mks_robin
extra_scripts = ${common.extra_scripts} extra_scripts = ${common_stm32f1.extra_scripts}
buildroot/share/PlatformIO/scripts/mks_robin_pro.py buildroot/share/PlatformIO/scripts/mks_robin_pro.py
# #
@ -1017,7 +1008,7 @@ extra_scripts = ${common.extra_scripts}
[env:trigorilla_pro] [env:trigorilla_pro]
platform = ${common_stm32f1.platform} platform = ${common_stm32f1.platform}
extends = env:mks_robin extends = env:mks_robin
extra_scripts = ${common.extra_scripts} extra_scripts = ${common_stm32f1.extra_scripts}
# #
# MKS Robin E3D (STM32F103RCT6) and # MKS Robin E3D (STM32F103RCT6) and
@ -1041,7 +1032,7 @@ build_flags = ${common_stm32f1.build_flags}
platform = ${common_stm32f1.platform} platform = ${common_stm32f1.platform}
extends = common_stm32f1 extends = common_stm32f1
board = genericSTM32F103VE board = genericSTM32F103VE
extra_scripts = ${common.extra_scripts} extra_scripts = ${common_stm32f1.extra_scripts}
buildroot/share/PlatformIO/scripts/mks_robin_e3p.py buildroot/share/PlatformIO/scripts/mks_robin_e3p.py
build_flags = ${common_stm32f1.build_flags} build_flags = ${common_stm32f1.build_flags}
-DMCU_STM32F103VE -DSS_TIMER=4 -DMCU_STM32F103VE -DSS_TIMER=4
@ -1055,7 +1046,7 @@ upload_protocol = jlink
platform = ${common_stm32f1.platform} platform = ${common_stm32f1.platform}
extends = common_stm32f1 extends = common_stm32f1
board = genericSTM32F103RC board = genericSTM32F103RC
extra_scripts = ${common.extra_scripts} extra_scripts = ${common_stm32f1.extra_scripts}
buildroot/share/PlatformIO/scripts/mks_robin_lite.py buildroot/share/PlatformIO/scripts/mks_robin_lite.py
# #
@ -1065,7 +1056,7 @@ extra_scripts = ${common.extra_scripts}
platform = ${common_stm32f1.platform} platform = ${common_stm32f1.platform}
extends = common_stm32f1 extends = common_stm32f1
board = genericSTM32F103RC board = genericSTM32F103RC
extra_scripts = ${common.extra_scripts} extra_scripts = ${common_stm32f1.extra_scripts}
buildroot/share/PlatformIO/scripts/mks_robin_lite3.py buildroot/share/PlatformIO/scripts/mks_robin_lite3.py
# #
@ -1075,7 +1066,7 @@ extra_scripts = ${common.extra_scripts}
platform = ${common_stm32f1.platform} platform = ${common_stm32f1.platform}
extends = common_stm32f1 extends = common_stm32f1
board = genericSTM32F103ZE board = genericSTM32F103ZE
extra_scripts = ${common.extra_scripts} extra_scripts = ${common_stm32f1.extra_scripts}
buildroot/share/PlatformIO/scripts/jgaurora_a5s_a1_with_bootloader.py buildroot/share/PlatformIO/scripts/jgaurora_a5s_a1_with_bootloader.py
build_flags = ${common_stm32f1.build_flags} build_flags = ${common_stm32f1.build_flags}
-DSTM32F1xx -DSTM32_XL_DENSITY -DSTM32F1xx -DSTM32_XL_DENSITY
@ -1230,7 +1221,7 @@ extra_scripts = ${common.extra_scripts}
platform = ${common_stm32f1.platform} platform = ${common_stm32f1.platform}
extends = common_stm32f1 extends = common_stm32f1
board = genericSTM32F103RC board = genericSTM32F103RC
extra_scripts = ${common.extra_scripts} extra_scripts = ${common_stm32f1.extra_scripts}
buildroot/share/PlatformIO/scripts/fly_mini.py buildroot/share/PlatformIO/scripts/fly_mini.py
build_flags = ${common_stm32f1.build_flags} build_flags = ${common_stm32f1.build_flags}
-DDEBUG_LEVEL=0 -DSS_TIMER=4 -DDEBUG_LEVEL=0 -DSS_TIMER=4
@ -1557,7 +1548,6 @@ build_flags = ${common_stm32.build_flags} -DENABLE_HWSERIAL3 -DTIMER_SE
build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC
extra_scripts = ${common.extra_scripts} pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py buildroot/share/PlatformIO/scripts/stm32_bootloader.py extra_scripts = ${common.extra_scripts} pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py buildroot/share/PlatformIO/scripts/stm32_bootloader.py
################################# #################################
# # # #
# Other Architectures # # Other Architectures #