bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Add support for an RGBW LED

Browse Source
This commit is contained in:
Scott Lahteine
2017-04-11 12:58:55 -05:00
parent e7746ffee4
commit dac21ec680
27 changed files with 150 additions and 60 deletions
Download Patch File Download Diff File Expand all files Collapse all files

30
Marlin/Marlin_main.cpp
View File

@ -947,7 +947,12 @@ void servo_init() {
#if HAS_COLOR_LEDS
void set_led_color(const uint8_t r, const uint8_t g, const uint8_t b) {
void set_led_color(
const uint8_t r, const uint8_t g, const uint8_t b
#if ENABLED(RGBW_LED)
, const uint8_t w=0
#endif
) {
#if ENABLED(BLINKM)
@ -965,6 +970,11 @@ void servo_init() {
analogWrite(RGB_LED_G_PIN, g);
analogWrite(RGB_LED_B_PIN, b);
#if ENABLED(RGBW_LED)
digitalWrite(RGB_LED_W_PIN, w ? HIGH : LOW);
analogWrite(RGB_LED_W_PIN, w);
#endif
#endif
}
@ -1156,7 +1166,7 @@ inline void get_serial_commands() {
card.printingHasFinished();
#if ENABLED(PRINTER_EVENT_LEDS)
LCD_MESSAGEPGM(MSG_INFO_COMPLETED_PRINTS);
set_led_color(0, 255, 0);
set_led_color(0, 255, 0); // Green
#if HAS_RESUME_CONTINUE
KEEPALIVE_STATE(PAUSED_FOR_USER);
wait_for_user = true;
@ -1165,7 +1175,7 @@ inline void get_serial_commands() {
#else
safe_delay(1000);
#endif
set_led_color(0, 0, 0);
set_led_color(0, 0, 0); // OFF
#endif
card.checkautostart(true);
}
@ -6199,7 +6209,11 @@ inline void gcode_M109() {
if (wait_for_heatup) {
LCD_MESSAGEPGM(MSG_HEATING_COMPLETE);
#if ENABLED(PRINTER_EVENT_LEDS)
set_led_color(255, 255, 255); // Set LEDs ALL WHITE
#if ENABLED(RGBW_LED)
set_led_color(0, 0, 0, 255); // Turn on the WHITE LED
#else
set_led_color(255, 255, 255); // Set LEDs All On
#endif
#endif
}
@ -6844,9 +6858,9 @@ inline void gcode_M121() { endstops.enable_globally(false); }
#if HAS_COLOR_LEDS
/**
* M150: Set Status LED Color - Use R-U-B for R-G-B
* M150: Set Status LED Color - Use R-U-B-W for R-G-B-W
*
* Always sets all 3 components. If a component is left out, set to 0.
* Always sets all 3 or 4 components. If a component is left out, set to 0.
*
* Examples:
*
@ -6854,6 +6868,7 @@ inline void gcode_M121() { endstops.enable_globally(false); }
* M150 R255 U127 ; Turn LED orange (PWM only)
* M150 ; Turn LED off
* M150 R U B ; Turn LED white
* M150 W ; Turn LED white using a white LED
*
*/
inline void gcode_M150() {
@ -6861,6 +6876,9 @@ inline void gcode_M121() { endstops.enable_globally(false); }
code_seen('R') ? (code_has_value() ? code_value_byte() : 255) : 0,
code_seen('U') ? (code_has_value() ? code_value_byte() : 255) : 0,
code_seen('B') ? (code_has_value() ? code_value_byte() : 255) : 0
#if ENABLED(RGBW_LED)
, code_seen('W') ? (code_has_value() ? code_value_byte() : 255) : 0
#endif
);
}