Edit PROPORTIONAL_FONT_RATIO comment

Marlin/Configuration_adv.h

@@ -1221,12 +1221,11 @@
 //#define NO_WORKSPACE_OFFSETS
 
 /**
- * This affects the way Marlin outputs blacks of spaces via serial connection by multiplying the number
+ * Set the number of proportional font spaces required to fill up a typical character space.
- * of spaces to be output by the ratio set below.  This allows for better alignment of output for commands
+ * This can help to better align the output of commands like `G29 O` Mesh Output.
- * like G29 O, which renders a mesh/grid.
  *
- * For clients that use a fixed-width font (like OctoPrint), leave this at 1.0; otherwise, adjust
+ * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0.
- * accordingly for your client and font.
+ * Otherwise, adjust according to your client and font.
  */
 #define PROPORTIONAL_FONT_RATIO 1.0
 

Marlin/example_configurations/Cartesio/Configuration_adv.h

@@ -1214,12 +1214,11 @@
 //#define NO_WORKSPACE_OFFSETS
 
 /**
- * This affects the way Marlin outputs blacks of spaces via serial connection by multiplying the number
+ * Set the number of proportional font spaces required to fill up a typical character space.
- * of spaces to be output by the ratio set below.  This allows for better alignment of output for commands
+ * This can help to better align the output of commands like `G29 O` Mesh Output.
- * like G29 O, which renders a mesh/grid.
  *
- * For clients that use a fixed-width font (like OctoPrint), leave this at 1.0; otherwise, adjust
+ * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0.
- * accordingly for your client and font.
+ * Otherwise, adjust according to your client and font.
  */
 #define PROPORTIONAL_FONT_RATIO 1.0
 

Marlin/example_configurations/Felix/Configuration_adv.h

@@ -1214,12 +1214,11 @@
 //#define NO_WORKSPACE_OFFSETS
 
 /**
- * This affects the way Marlin outputs blacks of spaces via serial connection by multiplying the number
+ * Set the number of proportional font spaces required to fill up a typical character space.
- * of spaces to be output by the ratio set below.  This allows for better alignment of output for commands
+ * This can help to better align the output of commands like `G29 O` Mesh Output.
- * like G29 O, which renders a mesh/grid.
  *
- * For clients that use a fixed-width font (like OctoPrint), leave this at 1.0; otherwise, adjust
+ * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0.
- * accordingly for your client and font.
+ * Otherwise, adjust according to your client and font.
  */
 #define PROPORTIONAL_FONT_RATIO 1.0
 

Marlin/example_configurations/FolgerTech-i3-2020/Configuration_adv.h

@@ -1227,12 +1227,11 @@
 //#define NO_WORKSPACE_OFFSETS
 
 /**
- * This affects the way Marlin outputs blacks of spaces via serial connection by multiplying the number
+ * Set the number of proportional font spaces required to fill up a typical character space.
- * of spaces to be output by the ratio set below.  This allows for better alignment of output for commands
+ * This can help to better align the output of commands like `G29 O` Mesh Output.
- * like G29 O, which renders a mesh/grid.
  *
- * For clients that use a fixed-width font (like OctoPrint), leave this at 1.0; otherwise, adjust
+ * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0.
- * accordingly for your client and font.
+ * Otherwise, adjust according to your client and font.
  */
 #define PROPORTIONAL_FONT_RATIO 1.5
 

Marlin/example_configurations/Hephestos/Configuration_adv.h

@@ -1214,12 +1214,11 @@
 //#define NO_WORKSPACE_OFFSETS
 
 /**
- * This affects the way Marlin outputs blacks of spaces via serial connection by multiplying the number
+ * Set the number of proportional font spaces required to fill up a typical character space.
- * of spaces to be output by the ratio set below.  This allows for better alignment of output for commands
+ * This can help to better align the output of commands like `G29 O` Mesh Output.
- * like G29 O, which renders a mesh/grid.
  *
- * For clients that use a fixed-width font (like OctoPrint), leave this at 1.0; otherwise, adjust
+ * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0.
- * accordingly for your client and font.
+ * Otherwise, adjust according to your client and font.
  */
 #define PROPORTIONAL_FONT_RATIO 1.0
 

Marlin/example_configurations/Hephestos_2/Configuration_adv.h

@@ -1198,12 +1198,11 @@
 //#define NO_WORKSPACE_OFFSETS
 
 /**
- * This affects the way Marlin outputs blacks of spaces via serial connection by multiplying the number
+ * Set the number of proportional font spaces required to fill up a typical character space.
- * of spaces to be output by the ratio set below.  This allows for better alignment of output for commands
+ * This can help to better align the output of commands like `G29 O` Mesh Output.
- * like G29 O, which renders a mesh/grid.
  *
- * For clients that use a fixed-width font (like OctoPrint), leave this at 1.0; otherwise, adjust
+ * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0.
- * accordingly for your client and font.
+ * Otherwise, adjust according to your client and font.
  */
 #define PROPORTIONAL_FONT_RATIO 1.0
 

Marlin/example_configurations/K8200/Configuration_adv.h

@@ -1227,12 +1227,11 @@
 //#define NO_WORKSPACE_OFFSETS
 
 /**
- * This affects the way Marlin outputs blacks of spaces via serial connection by multiplying the number
+ * Set the number of proportional font spaces required to fill up a typical character space.
- * of spaces to be output by the ratio set below.  This allows for better alignment of output for commands
+ * This can help to better align the output of commands like `G29 O` Mesh Output.
- * like G29 O, which renders a mesh/grid.
  *
- * For clients that use a fixed-width font (like OctoPrint), leave this at 1.0; otherwise, adjust
+ * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0.
- * accordingly for your client and font.
+ * Otherwise, adjust according to your client and font.
  */
 #define PROPORTIONAL_FONT_RATIO 1.0
 

Marlin/example_configurations/K8400/Configuration_adv.h

@@ -1214,12 +1214,11 @@
 //#define NO_WORKSPACE_OFFSETS
 
 /**
- * This affects the way Marlin outputs blacks of spaces via serial connection by multiplying the number
+ * Set the number of proportional font spaces required to fill up a typical character space.
- * of spaces to be output by the ratio set below.  This allows for better alignment of output for commands
+ * This can help to better align the output of commands like `G29 O` Mesh Output.
- * like G29 O, which renders a mesh/grid.
  *
- * For clients that use a fixed-width font (like OctoPrint), leave this at 1.0; otherwise, adjust
+ * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0.
- * accordingly for your client and font.
+ * Otherwise, adjust according to your client and font.
  */
 #define PROPORTIONAL_FONT_RATIO 1.0
 

Marlin/example_configurations/RigidBot/Configuration_adv.h

@@ -1214,12 +1214,11 @@
 //#define NO_WORKSPACE_OFFSETS
 
 /**
- * This affects the way Marlin outputs blacks of spaces via serial connection by multiplying the number
+ * Set the number of proportional font spaces required to fill up a typical character space.
- * of spaces to be output by the ratio set below.  This allows for better alignment of output for commands
+ * This can help to better align the output of commands like `G29 O` Mesh Output.
- * like G29 O, which renders a mesh/grid.
  *
- * For clients that use a fixed-width font (like OctoPrint), leave this at 1.0; otherwise, adjust
+ * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0.
- * accordingly for your client and font.
+ * Otherwise, adjust according to your client and font.
  */
 #define PROPORTIONAL_FONT_RATIO 1.0
 

Marlin/example_configurations/SCARA/Configuration_adv.h

@@ -1214,12 +1214,11 @@
 //#define NO_WORKSPACE_OFFSETS
 
 /**
- * This affects the way Marlin outputs blacks of spaces via serial connection by multiplying the number
+ * Set the number of proportional font spaces required to fill up a typical character space.
- * of spaces to be output by the ratio set below.  This allows for better alignment of output for commands
+ * This can help to better align the output of commands like `G29 O` Mesh Output.
- * like G29 O, which renders a mesh/grid.
  *
- * For clients that use a fixed-width font (like OctoPrint), leave this at 1.0; otherwise, adjust
+ * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0.
- * accordingly for your client and font.
+ * Otherwise, adjust according to your client and font.
  */
 #define PROPORTIONAL_FONT_RATIO 1.0
 

Marlin/example_configurations/TAZ4/Configuration_adv.h

@@ -1214,12 +1214,11 @@
 //#define NO_WORKSPACE_OFFSETS
 
 /**
- * This affects the way Marlin outputs blacks of spaces via serial connection by multiplying the number
+ * Set the number of proportional font spaces required to fill up a typical character space.
- * of spaces to be output by the ratio set below.  This allows for better alignment of output for commands
+ * This can help to better align the output of commands like `G29 O` Mesh Output.
- * like G29 O, which renders a mesh/grid.
  *
- * For clients that use a fixed-width font (like OctoPrint), leave this at 1.0; otherwise, adjust
+ * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0.
- * accordingly for your client and font.
+ * Otherwise, adjust according to your client and font.
  */
 #define PROPORTIONAL_FONT_RATIO 1.0
 

Marlin/example_configurations/TinyBoy2/Configuration_adv.h

@@ -1217,12 +1217,11 @@
 //#define NO_WORKSPACE_OFFSETS
 
 /**
- * This affects the way Marlin outputs blacks of spaces via serial connection by multiplying the number
+ * Set the number of proportional font spaces required to fill up a typical character space.
- * of spaces to be output by the ratio set below.  This allows for better alignment of output for commands
+ * This can help to better align the output of commands like `G29 O` Mesh Output.
- * like G29 O, which renders a mesh/grid.
  *
- * For clients that use a fixed-width font (like OctoPrint), leave this at 1.0; otherwise, adjust
+ * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0.
- * accordingly for your client and font.
+ * Otherwise, adjust according to your client and font.
  */
 #define PROPORTIONAL_FONT_RATIO 1.0
 

Marlin/example_configurations/WITBOX/Configuration_adv.h

@@ -1214,12 +1214,11 @@
 //#define NO_WORKSPACE_OFFSETS
 
 /**
- * This affects the way Marlin outputs blacks of spaces via serial connection by multiplying the number
+ * Set the number of proportional font spaces required to fill up a typical character space.
- * of spaces to be output by the ratio set below.  This allows for better alignment of output for commands
+ * This can help to better align the output of commands like `G29 O` Mesh Output.
- * like G29 O, which renders a mesh/grid.
  *
- * For clients that use a fixed-width font (like OctoPrint), leave this at 1.0; otherwise, adjust
+ * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0.
- * accordingly for your client and font.
+ * Otherwise, adjust according to your client and font.
  */
 #define PROPORTIONAL_FONT_RATIO 1.0
 

Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -1219,12 +1219,11 @@
 //#define NO_WORKSPACE_OFFSETS
 
 /**
- * This affects the way Marlin outputs blacks of spaces via serial connection by multiplying the number
+ * Set the number of proportional font spaces required to fill up a typical character space.
- * of spaces to be output by the ratio set below.  This allows for better alignment of output for commands
+ * This can help to better align the output of commands like `G29 O` Mesh Output.
- * like G29 O, which renders a mesh/grid.
  *
- * For clients that use a fixed-width font (like OctoPrint), leave this at 1.0; otherwise, adjust
+ * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0.
- * accordingly for your client and font.
+ * Otherwise, adjust according to your client and font.
  */
 #define PROPORTIONAL_FONT_RATIO 1.0
 

Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -1218,12 +1218,11 @@
 //#define NO_WORKSPACE_OFFSETS
 
 /**
- * This affects the way Marlin outputs blacks of spaces via serial connection by multiplying the number
+ * Set the number of proportional font spaces required to fill up a typical character space.
- * of spaces to be output by the ratio set below.  This allows for better alignment of output for commands
+ * This can help to better align the output of commands like `G29 O` Mesh Output.
- * like G29 O, which renders a mesh/grid.
  *
- * For clients that use a fixed-width font (like OctoPrint), leave this at 1.0; otherwise, adjust
+ * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0.
- * accordingly for your client and font.
+ * Otherwise, adjust according to your client and font.
  */
 #define PROPORTIONAL_FONT_RATIO 1.0
 

Marlin/example_configurations/delta/generic/Configuration_adv.h

@@ -1216,12 +1216,11 @@
 //#define NO_WORKSPACE_OFFSETS
 
 /**
- * This affects the way Marlin outputs blacks of spaces via serial connection by multiplying the number
+ * Set the number of proportional font spaces required to fill up a typical character space.
- * of spaces to be output by the ratio set below.  This allows for better alignment of output for commands
+ * This can help to better align the output of commands like `G29 O` Mesh Output.
- * like G29 O, which renders a mesh/grid.
  *
- * For clients that use a fixed-width font (like OctoPrint), leave this at 1.0; otherwise, adjust
+ * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0.
- * accordingly for your client and font.
+ * Otherwise, adjust according to your client and font.
  */
 #define PROPORTIONAL_FONT_RATIO 1.0
 

Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h

@@ -1216,12 +1216,11 @@
 //#define NO_WORKSPACE_OFFSETS
 
 /**
- * This affects the way Marlin outputs blacks of spaces via serial connection by multiplying the number
+ * Set the number of proportional font spaces required to fill up a typical character space.
- * of spaces to be output by the ratio set below.  This allows for better alignment of output for commands
+ * This can help to better align the output of commands like `G29 O` Mesh Output.
- * like G29 O, which renders a mesh/grid.
  *
- * For clients that use a fixed-width font (like OctoPrint), leave this at 1.0; otherwise, adjust
+ * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0.
- * accordingly for your client and font.
+ * Otherwise, adjust according to your client and font.
  */
 #define PROPORTIONAL_FONT_RATIO 1.0
 

Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h

@@ -1221,12 +1221,11 @@
 //#define NO_WORKSPACE_OFFSETS
 
 /**
- * This affects the way Marlin outputs blacks of spaces via serial connection by multiplying the number
+ * Set the number of proportional font spaces required to fill up a typical character space.
- * of spaces to be output by the ratio set below.  This allows for better alignment of output for commands
+ * This can help to better align the output of commands like `G29 O` Mesh Output.
- * like G29 O, which renders a mesh/grid.
  *
- * For clients that use a fixed-width font (like OctoPrint), leave this at 1.0; otherwise, adjust
+ * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0.
- * accordingly for your client and font.
+ * Otherwise, adjust according to your client and font.
  */
 #define PROPORTIONAL_FONT_RATIO 1.0
 

Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h

@@ -1216,12 +1216,11 @@
 //#define NO_WORKSPACE_OFFSETS
 
 /**
- * This affects the way Marlin outputs blacks of spaces via serial connection by multiplying the number
+ * Set the number of proportional font spaces required to fill up a typical character space.
- * of spaces to be output by the ratio set below.  This allows for better alignment of output for commands
+ * This can help to better align the output of commands like `G29 O` Mesh Output.
- * like G29 O, which renders a mesh/grid.
  *
- * For clients that use a fixed-width font (like OctoPrint), leave this at 1.0; otherwise, adjust
+ * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0.
- * accordingly for your client and font.
+ * Otherwise, adjust according to your client and font.
  */
 #define PROPORTIONAL_FONT_RATIO 1.0
 

Marlin/example_configurations/gCreate_gMax1.5+/Configuration_adv.h

@@ -1223,12 +1223,11 @@
 #define NO_WORKSPACE_OFFSETS
 
 /**
- * This affects the way Marlin outputs blacks of spaces via serial connection by multiplying the number
+ * Set the number of proportional font spaces required to fill up a typical character space.
- * of spaces to be output by the ratio set below.  This allows for better alignment of output for commands
+ * This can help to better align the output of commands like `G29 O` Mesh Output.
- * like G29 O, which renders a mesh/grid.
  *
- * For clients that use a fixed-width font (like OctoPrint), leave this at 1.0; otherwise, adjust
+ * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0.
- * accordingly for your client and font.
+ * Otherwise, adjust according to your client and font.
  */
 #define PROPORTIONAL_FONT_RATIO 1.5
 

Marlin/example_configurations/makibox/Configuration_adv.h

@@ -1214,12 +1214,11 @@
 //#define NO_WORKSPACE_OFFSETS
 
 /**
- * This affects the way Marlin outputs blacks of spaces via serial connection by multiplying the number
+ * Set the number of proportional font spaces required to fill up a typical character space.
- * of spaces to be output by the ratio set below.  This allows for better alignment of output for commands
+ * This can help to better align the output of commands like `G29 O` Mesh Output.
- * like G29 O, which renders a mesh/grid.
  *
- * For clients that use a fixed-width font (like OctoPrint), leave this at 1.0; otherwise, adjust
+ * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0.
- * accordingly for your client and font.
+ * Otherwise, adjust according to your client and font.
  */
 #define PROPORTIONAL_FONT_RATIO 1.0
 

Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h

@@ -1214,12 +1214,11 @@
 //#define NO_WORKSPACE_OFFSETS
 
 /**
- * This affects the way Marlin outputs blacks of spaces via serial connection by multiplying the number
+ * Set the number of proportional font spaces required to fill up a typical character space.
- * of spaces to be output by the ratio set below.  This allows for better alignment of output for commands
+ * This can help to better align the output of commands like `G29 O` Mesh Output.
- * like G29 O, which renders a mesh/grid.
  *
- * For clients that use a fixed-width font (like OctoPrint), leave this at 1.0; otherwise, adjust
+ * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0.
- * accordingly for your client and font.
+ * Otherwise, adjust according to your client and font.
  */
 #define PROPORTIONAL_FONT_RATIO 1.0
 

Marlin/example_configurations/wt150/Configuration_adv.h

@@ -1217,12 +1217,11 @@
 //#define NO_WORKSPACE_OFFSETS
 
 /**
- * This affects the way Marlin outputs blacks of spaces via serial connection by multiplying the number
+ * Set the number of proportional font spaces required to fill up a typical character space.
- * of spaces to be output by the ratio set below.  This allows for better alignment of output for commands
+ * This can help to better align the output of commands like `G29 O` Mesh Output.
- * like G29 O, which renders a mesh/grid.
  *
- * For clients that use a fixed-width font (like OctoPrint), leave this at 1.0; otherwise, adjust
+ * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0.
- * accordingly for your client and font.
+ * Otherwise, adjust according to your client and font.
  */
 #define PROPORTIONAL_FONT_RATIO 1.0