JGAurora A5S & A1 touch support (#14768)

This commit is contained in:
pinchies 2019-07-31 08:08:11 +10:00 committed by Scott Lahteine
parent c1b99c43b6
commit d98b9d54f1
13 changed files with 131 additions and 115 deletions

View File

@ -89,6 +89,8 @@ static inline bool GET_ARRAY_IS_DIGITAL(const int16_t array_pin) {
); );
} }
#include "../../inc/MarlinConfig.h" // Allow pins/pins.h to set density
static inline void pwm_details(const pin_t pin) { static inline void pwm_details(const pin_t pin) {
if (PWM_PIN(pin)) { if (PWM_PIN(pin)) {
timer_dev * const tdev = PIN_MAP[pin].timer_device; timer_dev * const tdev = PIN_MAP[pin].timer_device;

View File

@ -25,6 +25,8 @@
#include <libmaple/stm32.h> #include <libmaple/stm32.h>
#include "../../inc/MarlinConfig.h" // Allow pins/pins.h to set density
#if defined(STM32_HIGH_DENSITY) || defined(STM32_XL_DENSITY) #if defined(STM32_HIGH_DENSITY) || defined(STM32_XL_DENSITY)
#include "HAL_sdio_STM32F1.h" #include "HAL_sdio_STM32F1.h"

View File

@ -57,7 +57,7 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
case 3: irq_num = NVIC_TIMER3; break; case 3: irq_num = NVIC_TIMER3; break;
case 4: irq_num = NVIC_TIMER4; break; case 4: irq_num = NVIC_TIMER4; break;
case 5: irq_num = NVIC_TIMER5; break; case 5: irq_num = NVIC_TIMER5; break;
#ifdef STM32_HIGH_DENSITY #if ENABLED(STM32_HIGH_DENSITY)
// 6 & 7 are basic timers, avoid them // 6 & 7 are basic timers, avoid them
case 8: irq_num = NVIC_TIMER8_CC; break; case 8: irq_num = NVIC_TIMER8_CC; break;
#endif #endif

View File

@ -119,7 +119,7 @@ __attribute__((always_inline)) __STATIC_INLINE void __DSB(void) {
#define FSMC_CS_NE1 PD7 #define FSMC_CS_NE1 PD7
#ifdef STM32_XL_DENSITY #if ENABLED(STM32_XL_DENSITY)
#define FSMC_CS_NE2 PG9 #define FSMC_CS_NE2 PG9
#define FSMC_CS_NE3 PG10 #define FSMC_CS_NE3 PG10
#define FSMC_CS_NE4 PG12 #define FSMC_CS_NE4 PG12
@ -151,7 +151,7 @@ __attribute__((always_inline)) __STATIC_INLINE void __DSB(void) {
#define FSMC_RS_A22 PE6 #define FSMC_RS_A22 PE6
#define FSMC_RS_A23 PE2 #define FSMC_RS_A23 PE2
#ifdef STM32_XL_DENSITY #if ENABLED(STM32_XL_DENSITY)
#define FSMC_RS_A24 PG13 #define FSMC_RS_A24 PG13
#define FSMC_RS_A25 PG14 #define FSMC_RS_A25 PG14
#endif #endif
@ -173,7 +173,7 @@ void LCD_IO_Init(uint8_t cs, uint8_t rs) {
switch (cs) { switch (cs) {
case FSMC_CS_NE1: controllerAddress = (uint32_t)FSMC_NOR_PSRAM_REGION1; break; case FSMC_CS_NE1: controllerAddress = (uint32_t)FSMC_NOR_PSRAM_REGION1; break;
#ifdef STM32_XL_DENSITY #if ENABLED(STM32_XL_DENSITY)
case FSMC_CS_NE2: controllerAddress = (uint32_t)FSMC_NOR_PSRAM_REGION2; break; case FSMC_CS_NE2: controllerAddress = (uint32_t)FSMC_NOR_PSRAM_REGION2; break;
case FSMC_CS_NE3: controllerAddress = (uint32_t)FSMC_NOR_PSRAM_REGION3; break; case FSMC_CS_NE3: controllerAddress = (uint32_t)FSMC_NOR_PSRAM_REGION3; break;
case FSMC_CS_NE4: controllerAddress = (uint32_t)FSMC_NOR_PSRAM_REGION4; break; case FSMC_CS_NE4: controllerAddress = (uint32_t)FSMC_NOR_PSRAM_REGION4; break;
@ -184,7 +184,7 @@ void LCD_IO_Init(uint8_t cs, uint8_t rs) {
#define _ORADDR(N) controllerAddress |= (_BV32(N) - 2) #define _ORADDR(N) controllerAddress |= (_BV32(N) - 2)
switch (rs) { switch (rs) {
#ifdef STM32_XL_DENSITY #if ENABLED(STM32_XL_DENSITY)
case FSMC_RS_A0: _ORADDR( 1); break; case FSMC_RS_A0: _ORADDR( 1); break;
case FSMC_RS_A1: _ORADDR( 2); break; case FSMC_RS_A1: _ORADDR( 2); break;
case FSMC_RS_A2: _ORADDR( 3); break; case FSMC_RS_A2: _ORADDR( 3); break;
@ -210,7 +210,7 @@ void LCD_IO_Init(uint8_t cs, uint8_t rs) {
case FSMC_RS_A21: _ORADDR(22); break; case FSMC_RS_A21: _ORADDR(22); break;
case FSMC_RS_A22: _ORADDR(23); break; case FSMC_RS_A22: _ORADDR(23); break;
case FSMC_RS_A23: _ORADDR(24); break; case FSMC_RS_A23: _ORADDR(24); break;
#ifdef STM32_XL_DENSITY #if ENABLED(STM32_XL_DENSITY)
case FSMC_RS_A24: _ORADDR(25); break; case FSMC_RS_A24: _ORADDR(25); break;
case FSMC_RS_A25: _ORADDR(26); break; case FSMC_RS_A25: _ORADDR(26); break;
#endif #endif
@ -242,7 +242,7 @@ void LCD_IO_Init(uint8_t cs, uint8_t rs) {
gpio_set_mode(PIN_MAP[cs].gpio_device, PIN_MAP[cs].gpio_bit, GPIO_AF_OUTPUT_PP); //FSMC_CS_NEx gpio_set_mode(PIN_MAP[cs].gpio_device, PIN_MAP[cs].gpio_bit, GPIO_AF_OUTPUT_PP); //FSMC_CS_NEx
gpio_set_mode(PIN_MAP[rs].gpio_device, PIN_MAP[rs].gpio_bit, GPIO_AF_OUTPUT_PP); //FSMC_RS_Ax gpio_set_mode(PIN_MAP[rs].gpio_device, PIN_MAP[rs].gpio_bit, GPIO_AF_OUTPUT_PP); //FSMC_RS_Ax
#ifdef STM32_XL_DENSITY #if ENABLED(STM32_XL_DENSITY)
FSMC_NOR_PSRAM4_BASE->BCR = FSMC_BCR_WREN | FSMC_BCR_MTYP_SRAM | FSMC_BCR_MWID_16BITS | FSMC_BCR_MBKEN; FSMC_NOR_PSRAM4_BASE->BCR = FSMC_BCR_WREN | FSMC_BCR_MTYP_SRAM | FSMC_BCR_MWID_16BITS | FSMC_BCR_MBKEN;
FSMC_NOR_PSRAM4_BASE->BTR = (FSMC_DATA_SETUP_TIME << 8) | FSMC_ADDRESS_SETUP_TIME; FSMC_NOR_PSRAM4_BASE->BTR = (FSMC_DATA_SETUP_TIME << 8) | FSMC_ADDRESS_SETUP_TIME;
#else // PSRAM1 for STM32F103V (high density) #else // PSRAM1 for STM32F103V (high density)

View File

@ -63,9 +63,9 @@ void XPT2046::init(void) {
uint8_t XPT2046::read_buttons() { uint8_t XPT2046::read_buttons() {
int16_t tsoffsets[4] = { 0 }; int16_t tsoffsets[4] = { 0 };
static uint32_t timeout = 0; static uint32_t touchtimeout = 0;
if (PENDING(millis(), timeout)) return 0; if (PENDING(millis(), touchtimeout)) return 0;
timeout = millis() + 250; touchtimeout = millis() + 80; // ideally want to set this lower for the games... 30 or 40.
if (tsoffsets[0] + tsoffsets[1] == 0) { if (tsoffsets[0] + tsoffsets[1] == 0) {
// Not yet set, so use defines as fallback... // Not yet set, so use defines as fallback...
@ -82,12 +82,11 @@ uint8_t XPT2046::read_buttons() {
y = uint16_t(((uint32_t(getInTouch(XPT2046_Y))) * tsoffsets[2]) >> 16) + tsoffsets[3]; y = uint16_t(((uint32_t(getInTouch(XPT2046_Y))) * tsoffsets[2]) >> 16) + tsoffsets[3];
if (!isTouched()) return 0; // Fingers must still be on the TS for a valid read. if (!isTouched()) return 0; // Fingers must still be on the TS for a valid read.
if (y < 185 || y > 224) return 0; if (y < 175 || y > 234) return 0;
if (WITHIN(x, 21, 98)) encoderDiff = -(ENCODER_STEPS_PER_MENU_ITEM) * ENCODER_PULSES_PER_STEP;
else if (WITHIN(x, 121, 198)) encoderDiff = ENCODER_STEPS_PER_MENU_ITEM * ENCODER_PULSES_PER_STEP;
else if (WITHIN(x, 221, 298)) return EN_C;
if (WITHIN(x, 11, 109)) encoderDiff = -(ENCODER_STEPS_PER_MENU_ITEM) * ENCODER_PULSES_PER_STEP;
else if (WITHIN(x, 111, 209)) encoderDiff = ENCODER_STEPS_PER_MENU_ITEM * ENCODER_PULSES_PER_STEP;
else if (WITHIN(x, 211, 309)) return EN_C;
return 0; return 0;
} }
@ -96,7 +95,7 @@ bool XPT2046::isTouched() {
#if PIN_EXISTS(TOUCH_INT) #if PIN_EXISTS(TOUCH_INT)
READ(TOUCH_INT_PIN) != HIGH READ(TOUCH_INT_PIN) != HIGH
#else #else
getInTouch(XPT2046_Z1) >= XPT2046_Z1_TRESHHOLD getInTouch(XPT2046_Z1) >= XPT2046_Z1_THRESHOLD
#endif #endif
); );
} }

View File

@ -34,7 +34,9 @@ enum XPTCoordinate : uint8_t {
XPT2046_Z2 = 0x40 XPT2046_Z2 = 0x40
}; };
#define XPT2046_Z1_TRESHHOLD 10 #ifndef XPT2046_Z1_THRESHOLD
#define XPT2046_Z1_THRESHOLD 10
#endif
class XPT2046 { class XPT2046 {
public: public:

View File

@ -463,7 +463,7 @@
#elif MB(BIGTREE_SKR_E3_DIP) #elif MB(BIGTREE_SKR_E3_DIP)
#include "stm32/pins_BIGTREE_SKR_E3_DIP.h" // STM32F1 env:BIGTREE_SKR_MINI #include "stm32/pins_BIGTREE_SKR_E3_DIP.h" // STM32F1 env:BIGTREE_SKR_MINI
#elif MB(JGAURORA_A5S_A1) #elif MB(JGAURORA_A5S_A1)
#include "stm32/pins_JGAURORA_A5S_A1.h" // STM32F1 env:JGAURORA_A5S_A1 #include "stm32/pins_JGAURORA_A5S_A1.h" // STM32F1 env:jgaurora_a5s_a1
#elif MB(FYSETC_AIO_II) #elif MB(FYSETC_AIO_II)
#include "stm32/pins_FYSETC_AIO_II.h" // STM32F1 env:fysetc_STM32F1 #include "stm32/pins_FYSETC_AIO_II.h" // STM32F1 env:fysetc_STM32F1
#elif MB(FYSETC_CHEETAH) #elif MB(FYSETC_CHEETAH)

View File

@ -22,35 +22,30 @@
#pragma once #pragma once
/** /**
* 2017 Victor Perez Marlin for stm32f1 test *
* 2018 Modified by Pablo Crespo for Morpheus Board (https://github.com/pscrespo/Morpheus-STM32) *
* 2019 Modified by Roberto Mariani & Samuel Pinches for JGAurora A5S & A1 Board. * o
* Pin assignments for 32-bit JGAurora A5S & A1
*/ */
/**
* JGAurora A5S A1 Board pin assignments
*/
#ifndef __STM32F1__ #ifndef __STM32F1__
#error "Oops! Select an STM32F1 board in 'Tools > Board.'" #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
#elif HOTENDS > 1 || E_STEPPERS > 1
#error "JGAurora 32-bit board only supports 1 hotend / E-stepper. Comment out this line to continue."
#endif #endif
#define BOARD_NAME "JGAurora A5S A1 board" #define BOARD_NAME "JGAurora A5S A1 board"
// #define STM32_XL_DENSITY // required, but should be set by platformio flags, not here! (why? not sure.) #define STM32_XL_DENSITY
// #define MCU_STM32F103ZE // not yet required
//#define MCU_STM32F103ZE // not yet required // Enable EEPROM Emulation for this board, so that we don't overwrite factory data
// #define I2C_EEPROM // AT24C64 // #define I2C_EEPROM // AT24C64
// #define E2END 0x7FFF // 64KB // #define E2END 0x7FFF // 64KB
// #define FLASH_EEPROM_EMULATION 1
// Enable EEPROM Emulation for this board // #define E2END 0xFFF // 4KB
// #define E2END uint32(EEPROM_START_ADDRESS + (EEPROM_PAGE_SIZE * 2) - 1)
//#define FLASH_EEPROM_EMULATION 1 // #define EEPROM_CHITCHAT
//#define E2END 0xFFF // 4KB // #define DEBUG_EEPROM_READWRITE
//#define E2END uint32(EEPROM_START_ADDRESS + (EEPROM_PAGE_SIZE * 2) - 1)
//#define EEPROM_CHITCHAT
//#define DEBUG_EEPROM_READWRITE
// //
// Limit Switches // Limit Switches
@ -58,6 +53,9 @@
#define X_STOP_PIN PC6 #define X_STOP_PIN PC6
#define Y_STOP_PIN PG8 #define Y_STOP_PIN PG8
#define Z_STOP_PIN PG7 #define Z_STOP_PIN PG7
//#define X_MAX_PIN PC5
//#define Y_MAX_PIN PC4
//#define Z_MAX_PIN PB0
// //
// Steppers // Steppers
@ -96,7 +94,6 @@
#define FAN_PIN PA1 #define FAN_PIN PA1
#define PS_ON_PIN PA0
#define FIL_RUNOUT_PIN PC7 #define FIL_RUNOUT_PIN PC7
// //
@ -106,6 +103,10 @@
#define FSMC_CS_PIN PD7 #define FSMC_CS_PIN PD7
#define FSMC_RS_PIN PG0 #define FSMC_RS_PIN PG0
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
#define FSMC_DMA_DEV DMA2
#define FSMC_DMA_CHANNEL DMA_CH5
// //
// SD Card // SD Card
// //
@ -125,5 +126,3 @@
#define TOUCH_CS_PIN PA4 #define TOUCH_CS_PIN PA4
#define TOUCH_INT_PIN PC4 #define TOUCH_INT_PIN PC4
#endif #endif
#define NO_PAUSE_AFTER_PRINT

View File

@ -73,9 +73,14 @@
// User-specified version info of this build to display in [Pronterface, etc] terminal window during // User-specified version info of this build to display in [Pronterface, etc] terminal window during
// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
// build by the user have been successfully uploaded into firmware. // build by the user have been successfully uploaded into firmware.
// ╦╔═╗╔═╗┬ ┬┬─┐┌─┐┬─┐┌─┐╔═╗┌─┐┬─┐┬ ┬┌┬┐ ┌─┐┌─┐┌┬┐
// ║║ ╦╠═╣│ │├┬┘│ │├┬┘├─┤╠╣ │ │├┬┘│ ││││ │ │ ││││
// ╚╝╚═╝╩ ╩└─┘┴└─└─┘┴└─┴ ┴╚ └─┘┴└─└─┘┴ ┴o└─┘└─┘┴ ┴
#define STRING_CONFIG_H_AUTHOR "(Roberto Mariani & Samuel Pinches)" // Who made the changes. #define STRING_CONFIG_H_AUTHOR "(Roberto Mariani & Samuel Pinches)" // Who made the changes.
#define SHOW_BOOTSCREEN #define SHOW_BOOTSCREEN
#define STRING_SPLASH_LINE1 "Marlin 2b6 (10/6/19)" // will be shown during bootup in line 1 #define STRING_SPLASH_LINE1 "JG-A1 v2.0 (29-7-19)" // will be shown during bootup in line 1
#define STRING_SPLASH_LINE2 "JGAuroraForum.com" // will be shown during bootup in line 2 #define STRING_SPLASH_LINE2 "JGAuroraForum.com" // will be shown during bootup in line 2
/** /**
@ -725,7 +730,7 @@
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 360, 150, 15, 25 } #define DEFAULT_MAX_FEEDRATE { 360, 150, 30, 40 }
/** /**
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
@ -921,7 +926,7 @@
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
// Feedrate (mm/m) for the "accurate" probe of each point // Feedrate (mm/m) for the "accurate" probe of each point
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 4)
/** /**
* Multiple Probing * Multiple Probing
@ -1330,7 +1335,7 @@
#endif #endif
// Homing speeds (mm/m) // Homing speeds (mm/m)
#define HOMING_FEEDRATE_XY (50*60) #define HOMING_FEEDRATE_XY (90*60)
#define HOMING_FEEDRATE_Z (12*60) #define HOMING_FEEDRATE_Z (12*60)
// Validate that endstops are triggered on homing moves // Validate that endstops are triggered on homing moves
@ -2036,6 +2041,7 @@
// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, A1, etc.) // FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, A1, etc.)
// //
#define FSMC_GRAPHICAL_TFT #define FSMC_GRAPHICAL_TFT
//#define PRINTER_EVENT_LEDS
//============================================================================= //=============================================================================
//============================ Other Controllers ============================ //============================ Other Controllers ============================
@ -2044,12 +2050,13 @@
// //
// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 // ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8
// //
//#define TOUCH_BUTTONS #define TOUCH_BUTTONS
#if ENABLED(TOUCH_BUTTONS) #if ENABLED(TOUCH_BUTTONS)
#define XPT2046_X_CALIBRATION 12316 #define XPT2046_X_CALIBRATION 12316
#define XPT2046_Y_CALIBRATION -8981 #define XPT2046_Y_CALIBRATION -8981
#define XPT2046_X_OFFSET -43 #define XPT2046_X_OFFSET -43
#define XPT2046_Y_OFFSET 257 #define XPT2046_Y_OFFSET 257
#define XPT2046_Z1_THRESHOLD 1
#endif #endif
// //

View File

@ -306,7 +306,7 @@
* *
* Define one or both of these to override the default 0-255 range. * Define one or both of these to override the default 0-255 range.
*/ */
//#define FAN_MIN_PWM 50 #define FAN_MIN_PWM 30
//#define FAN_MAX_PWM 128 //#define FAN_MAX_PWM 128
/** /**
@ -522,9 +522,9 @@
#define X_HOME_BUMP_MM 5 #define X_HOME_BUMP_MM 5
#define Y_HOME_BUMP_MM 5 #define Y_HOME_BUMP_MM 5
#define Z_HOME_BUMP_MM 2 #define Z_HOME_BUMP_MM 2
#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) #define HOMING_BUMP_DIVISOR { 5, 5, 5 } // Re-Bump Speed Divisor (Divides the Homing Feedrate)
//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially #define QUICK_HOME // If homing includes X and Y, do a diagonal move initially
//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing #define HOMING_BACKOFF_MM { 1, 1, 0 } // (mm) Move away from the endstops after homing
// When G28 is called, this option will make Y home before X // When G28 is called, this option will make Y home before X
//#define HOME_Y_BEFORE_X //#define HOME_Y_BEFORE_X
@ -654,7 +654,7 @@
// @section lcd // @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI) #if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel #define MANUAL_FEEDRATE { 60*60, 60*60, 10*60, 10*60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL) #if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
@ -862,13 +862,13 @@
#endif #endif
// Scroll a longer status message into view // Scroll a longer status message into view
//#define STATUS_MESSAGE_SCROLLING #define STATUS_MESSAGE_SCROLLING
// On the Info Screen, display XY with one decimal place when possible // On the Info Screen, display XY with one decimal place when possible
//#define LCD_DECIMAL_SMALL_XY #define LCD_DECIMAL_SMALL_XY
// The timeout (in ms) to return to the status screen from sub-menus // The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000 #define LCD_TIMEOUT_TO_STATUS 15000
// Add an 'M73' G-code to set the current percentage // Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY //#define LCD_SET_PROGRESS_MANUALLY
@ -892,12 +892,12 @@
#if ENABLED(LED_CONTROL_MENU) #if ENABLED(LED_CONTROL_MENU)
#define LED_COLOR_PRESETS // Enable the Preset Color menu option #define LED_COLOR_PRESETS // Enable the Preset Color menu option
#if ENABLED(LED_COLOR_PRESETS) #if ENABLED(LED_COLOR_PRESETS)
#define LED_USER_PRESET_RED 0 // User defined RED value #define LED_USER_PRESET_RED 255 // User defined RED value
#define LED_USER_PRESET_GREEN 255 // User defined GREEN value #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
#define LED_USER_PRESET_BLUE 255 // User defined BLUE value #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
#endif #endif
#endif // LED_CONTROL_MENU #endif // LED_CONTROL_MENU
@ -908,7 +908,7 @@
// as SD_DETECT_PIN in your board's pins definitions. // as SD_DETECT_PIN in your board's pins definitions.
// This setting should be disabled unless you are using a push button, pulling the pin to ground. // This setting should be disabled unless you are using a push button, pulling the pin to ground.
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
//#define SD_DETECT_INVERTED #define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place.
@ -982,10 +982,10 @@
#endif #endif
// This allows hosts to request long names for files and folders with M33 // This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT #define LONG_FILENAME_HOST_SUPPORT
// Enable this option to scroll long filenames in the SD card menu // Enable this option to scroll long filenames in the SD card menu
//#define SCROLL_LONG_FILENAMES #define SCROLL_LONG_FILENAMES
// Leave the heaters on after Stop Print (not recommended!) // Leave the heaters on after Stop Print (not recommended!)
//#define SD_ABORT_NO_COOLDOWN //#define SD_ABORT_NO_COOLDOWN
@ -1081,13 +1081,13 @@
*/ */
#if HAS_GRAPHICAL_LCD #if HAS_GRAPHICAL_LCD
// Show SD percentage next to the progress bar // Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT #define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME //#define XYZ_HOLLOW_FRAME
// Enable to save many cycles by drawing a hollow frame on Menu Screens // Enable to save many cycles by drawing a hollow frame on Menu Screens
#define MENU_HOLLOW_FRAME //#define MENU_HOLLOW_FRAME
// A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM.
// Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
@ -1137,7 +1137,7 @@
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar #define STATUS_HEAT_PERCENT // Show heating in a progress bar
//#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
// Frivolous Game Options // Frivolous Game Options
@ -1184,14 +1184,14 @@
#if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency. // Note: Extra time may be added to mitigate controller latency.
//#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement).
#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle.
#if ENABLED(MOVE_Z_WHEN_IDLE) #if ENABLED(MOVE_Z_WHEN_IDLE)
#define MOVE_Z_IDLE_MULTIPLICATOR 10 // Multiply 1mm by this factor for the move step size. #define MOVE_Z_IDLE_MULTIPLICATOR 10 // Multiply 1mm by this factor for the move step size.
#endif #endif
#endif #endif
//#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28
//#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping
#if ENABLED(BABYSTEP_ZPROBE_OFFSET) #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
@ -1491,23 +1491,23 @@
* Requires NOZZLE_PARK_FEATURE. * Requires NOZZLE_PARK_FEATURE.
* This feature is required for the default FILAMENT_RUNOUT_SCRIPT. * This feature is required for the default FILAMENT_RUNOUT_SCRIPT.
*/ */
//#define ADVANCED_PAUSE_FEATURE #define ADVANCED_PAUSE_FEATURE
#if ENABLED(ADVANCED_PAUSE_FEATURE) #if ENABLED(ADVANCED_PAUSE_FEATURE)
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
// This short retract is done immediately, before parking the nozzle. // This short retract is done immediately, before parking the nozzle.
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 40 // (mm/s) Unload filament feedrate. This can be pretty fast.
#define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. #define FILAMENT_CHANGE_UNLOAD_LENGTH 820 // (mm) The length of filament for a complete unload.
// For Bowden, the full length of the tube and nozzle. // For Bowden, the full length of the tube and nozzle.
// For direct drive, the full length of the nozzle. // For direct drive, the full length of the nozzle.
// Set to 0 for manual unloading. // Set to 0 for manual unloading.
#define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 40 // (mm/s) Slow move when starting load.
#define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 730 // (mm) Slow length, to allow time to insert material.
// 0 to disable start loading and skip to fast load only // 0 to disable start loading and skip to fast load only
#define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
#define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
#define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 75 // (mm) Load length of filament, from extruder gear to nozzle.
// For Bowden, the full length of the tube and nozzle. // For Bowden, the full length of the tube and nozzle.
// For direct drive, the full length of the nozzle. // For direct drive, the full length of the nozzle.
//#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted.
@ -1528,10 +1528,10 @@
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#endif #endif

View File

@ -73,9 +73,14 @@
// User-specified version info of this build to display in [Pronterface, etc] terminal window during // User-specified version info of this build to display in [Pronterface, etc] terminal window during
// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
// build by the user have been successfully uploaded into firmware. // build by the user have been successfully uploaded into firmware.
// ╦╔═╗╔═╗┬ ┬┬─┐┌─┐┬─┐┌─┐╔═╗┌─┐┬─┐┬ ┬┌┬┐ ┌─┐┌─┐┌┬┐
// ║║ ╦╠═╣│ │├┬┘│ │├┬┘├─┤╠╣ │ │├┬┘│ ││││ │ │ ││││
// ╚╝╚═╝╩ ╩└─┘┴└─└─┘┴└─┴ ┴╚ └─┘┴└─└─┘┴ ┴o└─┘└─┘┴ ┴
#define STRING_CONFIG_H_AUTHOR "(Roberto Mariani & Samuel Pinches)" // Who made the changes. #define STRING_CONFIG_H_AUTHOR "(Roberto Mariani & Samuel Pinches)" // Who made the changes.
#define SHOW_BOOTSCREEN #define SHOW_BOOTSCREEN
#define STRING_SPLASH_LINE1 "Marlin 2b6 (10/6/19)" // will be shown during bootup in line 1 #define STRING_SPLASH_LINE1 "JG-A5S v2.0 (29-7-19)" // will be shown during bootup in line 1
#define STRING_SPLASH_LINE2 "JGAuroraForum.com" // will be shown during bootup in line 2 #define STRING_SPLASH_LINE2 "JGAuroraForum.com" // will be shown during bootup in line 2
/** /**
@ -725,7 +730,7 @@
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 360, 150, 15, 25 } #define DEFAULT_MAX_FEEDRATE { 360, 150, 30, 40 }
/** /**
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
@ -921,7 +926,7 @@
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
// Feedrate (mm/m) for the "accurate" probe of each point // Feedrate (mm/m) for the "accurate" probe of each point
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 4)
/** /**
* Multiple Probing * Multiple Probing
@ -1330,7 +1335,7 @@
#endif #endif
// Homing speeds (mm/m) // Homing speeds (mm/m)
#define HOMING_FEEDRATE_XY (50*60) #define HOMING_FEEDRATE_XY (90*60)
#define HOMING_FEEDRATE_Z (12*60) #define HOMING_FEEDRATE_Z (12*60)
// Validate that endstops are triggered on homing moves // Validate that endstops are triggered on homing moves
@ -2036,7 +2041,7 @@
// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, A1, etc.) // FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, A1, etc.)
// //
#define FSMC_GRAPHICAL_TFT #define FSMC_GRAPHICAL_TFT
#define PRINTER_EVENT_LEDS //#define PRINTER_EVENT_LEDS
//============================================================================= //=============================================================================
//============================ Other Controllers ============================ //============================ Other Controllers ============================
@ -2045,12 +2050,13 @@
// //
// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 // ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8
// //
//#define TOUCH_BUTTONS #define TOUCH_BUTTONS
#if ENABLED(TOUCH_BUTTONS) #if ENABLED(TOUCH_BUTTONS)
#define XPT2046_X_CALIBRATION 12316 #define XPT2046_X_CALIBRATION 12316
#define XPT2046_Y_CALIBRATION -8981 #define XPT2046_Y_CALIBRATION -8981
#define XPT2046_X_OFFSET -43 #define XPT2046_X_OFFSET -43
#define XPT2046_Y_OFFSET 257 #define XPT2046_Y_OFFSET 257
#define XPT2046_Z1_THRESHOLD 1
#endif #endif
// //

View File

@ -306,7 +306,7 @@
* *
* Define one or both of these to override the default 0-255 range. * Define one or both of these to override the default 0-255 range.
*/ */
//#define FAN_MIN_PWM 50 #define FAN_MIN_PWM 30
//#define FAN_MAX_PWM 128 //#define FAN_MAX_PWM 128
/** /**
@ -522,9 +522,9 @@
#define X_HOME_BUMP_MM 5 #define X_HOME_BUMP_MM 5
#define Y_HOME_BUMP_MM 5 #define Y_HOME_BUMP_MM 5
#define Z_HOME_BUMP_MM 2 #define Z_HOME_BUMP_MM 2
#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) #define HOMING_BUMP_DIVISOR { 5, 5, 5 } // Re-Bump Speed Divisor (Divides the Homing Feedrate)
//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially #define QUICK_HOME // If homing includes X and Y, do a diagonal move initially
//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing #define HOMING_BACKOFF_MM { 1, 1, 0 } // (mm) Move away from the endstops after homing
// When G28 is called, this option will make Y home before X // When G28 is called, this option will make Y home before X
//#define HOME_Y_BEFORE_X //#define HOME_Y_BEFORE_X
@ -654,7 +654,7 @@
// @section lcd // @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI) #if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel #define MANUAL_FEEDRATE { 60*60, 60*60, 10*60, 10*60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL) #if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
@ -862,13 +862,13 @@
#endif #endif
// Scroll a longer status message into view // Scroll a longer status message into view
//#define STATUS_MESSAGE_SCROLLING #define STATUS_MESSAGE_SCROLLING
// On the Info Screen, display XY with one decimal place when possible // On the Info Screen, display XY with one decimal place when possible
//#define LCD_DECIMAL_SMALL_XY #define LCD_DECIMAL_SMALL_XY
// The timeout (in ms) to return to the status screen from sub-menus // The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000 #define LCD_TIMEOUT_TO_STATUS 15000
// Add an 'M73' G-code to set the current percentage // Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY //#define LCD_SET_PROGRESS_MANUALLY
@ -888,16 +888,16 @@
* LED Control Menu * LED Control Menu
* Enable this feature to add LED Control to the LCD menu * Enable this feature to add LED Control to the LCD menu
*/ */
#define LED_CONTROL_MENU //#define LED_CONTROL_MENU
#if ENABLED(LED_CONTROL_MENU) #if ENABLED(LED_CONTROL_MENU)
#define LED_COLOR_PRESETS // Enable the Preset Color menu option #define LED_COLOR_PRESETS // Enable the Preset Color menu option
#if ENABLED(LED_COLOR_PRESETS) #if ENABLED(LED_COLOR_PRESETS)
#define LED_USER_PRESET_RED 0 // User defined RED value #define LED_USER_PRESET_RED 255 // User defined RED value
#define LED_USER_PRESET_GREEN 255 // User defined GREEN value #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
#define LED_USER_PRESET_BLUE 255 // User defined BLUE value #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
#endif #endif
#endif // LED_CONTROL_MENU #endif // LED_CONTROL_MENU
@ -908,7 +908,7 @@
// as SD_DETECT_PIN in your board's pins definitions. // as SD_DETECT_PIN in your board's pins definitions.
// This setting should be disabled unless you are using a push button, pulling the pin to ground. // This setting should be disabled unless you are using a push button, pulling the pin to ground.
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
//#define SD_DETECT_INVERTED #define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place.
@ -982,10 +982,10 @@
#endif #endif
// This allows hosts to request long names for files and folders with M33 // This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT #define LONG_FILENAME_HOST_SUPPORT
// Enable this option to scroll long filenames in the SD card menu // Enable this option to scroll long filenames in the SD card menu
//#define SCROLL_LONG_FILENAMES #define SCROLL_LONG_FILENAMES
// Leave the heaters on after Stop Print (not recommended!) // Leave the heaters on after Stop Print (not recommended!)
//#define SD_ABORT_NO_COOLDOWN //#define SD_ABORT_NO_COOLDOWN
@ -1081,13 +1081,13 @@
*/ */
#if HAS_GRAPHICAL_LCD #if HAS_GRAPHICAL_LCD
// Show SD percentage next to the progress bar // Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT #define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME //#define XYZ_HOLLOW_FRAME
// Enable to save many cycles by drawing a hollow frame on Menu Screens // Enable to save many cycles by drawing a hollow frame on Menu Screens
#define MENU_HOLLOW_FRAME //#define MENU_HOLLOW_FRAME
// A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM.
// Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
@ -1137,7 +1137,7 @@
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar #define STATUS_HEAT_PERCENT // Show heating in a progress bar
//#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
// Frivolous Game Options // Frivolous Game Options
@ -1184,14 +1184,14 @@
#if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency. // Note: Extra time may be added to mitigate controller latency.
//#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement).
#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle.
#if ENABLED(MOVE_Z_WHEN_IDLE) #if ENABLED(MOVE_Z_WHEN_IDLE)
#define MOVE_Z_IDLE_MULTIPLICATOR 10 // Multiply 1mm by this factor for the move step size. #define MOVE_Z_IDLE_MULTIPLICATOR 10 // Multiply 1mm by this factor for the move step size.
#endif #endif
#endif #endif
//#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28
//#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping
#if ENABLED(BABYSTEP_ZPROBE_OFFSET) #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
@ -1491,23 +1491,23 @@
* Requires NOZZLE_PARK_FEATURE. * Requires NOZZLE_PARK_FEATURE.
* This feature is required for the default FILAMENT_RUNOUT_SCRIPT. * This feature is required for the default FILAMENT_RUNOUT_SCRIPT.
*/ */
//#define ADVANCED_PAUSE_FEATURE #define ADVANCED_PAUSE_FEATURE
#if ENABLED(ADVANCED_PAUSE_FEATURE) #if ENABLED(ADVANCED_PAUSE_FEATURE)
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
// This short retract is done immediately, before parking the nozzle. // This short retract is done immediately, before parking the nozzle.
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 40 // (mm/s) Unload filament feedrate. This can be pretty fast.
#define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. #define FILAMENT_CHANGE_UNLOAD_LENGTH 820 // (mm) The length of filament for a complete unload.
// For Bowden, the full length of the tube and nozzle. // For Bowden, the full length of the tube and nozzle.
// For direct drive, the full length of the nozzle. // For direct drive, the full length of the nozzle.
// Set to 0 for manual unloading. // Set to 0 for manual unloading.
#define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 40 // (mm/s) Slow move when starting load.
#define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 730 // (mm) Slow length, to allow time to insert material.
// 0 to disable start loading and skip to fast load only // 0 to disable start loading and skip to fast load only
#define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
#define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
#define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 75 // (mm) Load length of filament, from extruder gear to nozzle.
// For Bowden, the full length of the tube and nozzle. // For Bowden, the full length of the tube and nozzle.
// For direct drive, the full length of the nozzle. // For direct drive, the full length of the nozzle.
//#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted.
@ -1528,10 +1528,10 @@
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#endif #endif

View File

@ -478,13 +478,13 @@ lib_ignore = c1921b4
# #
# JGAurora A5S A1 (STM32F103ZET6) # JGAurora A5S A1 (STM32F103ZET6)
# #
[env:JGAURORA_A5S_A1] [env:jgaurora_a5s_a1]
platform = ststm32 platform = ststm32
framework = arduino framework = arduino
board = genericSTM32F103ZE board = genericSTM32F103ZE
extra_scripts = buildroot/share/PlatformIO/scripts/jgaurora_a5s_a1_with_bootloader.py extra_scripts = buildroot/share/PlatformIO/scripts/jgaurora_a5s_a1_with_bootloader.py
build_flags = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py build_flags = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py
${common.build_flags} -std=gnu++14 ${common.build_flags} -DSTM32F1xx -std=gnu++14
build_unflags = -std=gnu++11 build_unflags = -std=gnu++11
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1> src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
lib_deps = ${common.lib_deps} lib_deps = ${common.lib_deps}
@ -495,7 +495,6 @@ lib_ignore = c1921b4
Adafruit NeoPixel Adafruit NeoPixel
libf3e libf3e
TMC26XStepper TMC26XStepper
lib_ldf_mode = chain
monitor_speed = 250000 monitor_speed = 250000
# #