bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

JGAurora A5S & A1 touch support (#14768)

Browse Source
This commit is contained in:
pinchies 2019-07-31 08:08:11 +10:00 committed by Scott Lahteine
parent c1b99c43b6
commit d98b9d54f1
13 changed files with 131 additions and 115 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Marlin/src/HAL/HAL_STM32/pinsDebug_STM32GENERIC.h
View File

@ -89,6 +89,8 @@ static inline bool GET_ARRAY_IS_DIGITAL(const int16_t array_pin) {
); );
} }
#include "../../inc/MarlinConfig.h" // Allow pins/pins.h to set density
static inline void pwm_details(const pin_t pin) { static inline void pwm_details(const pin_t pin) {
if (PWM_PIN(pin)) { if (PWM_PIN(pin)) {
timer_dev * const tdev = PIN_MAP[pin].timer_device; timer_dev * const tdev = PIN_MAP[pin].timer_device;

2
Marlin/src/HAL/HAL_STM32F1/HAL_sdio_STM32F1.cpp
View File

@ -25,6 +25,8 @@
#include <libmaple/stm32.h> #include <libmaple/stm32.h>
#include "../../inc/MarlinConfig.h" // Allow pins/pins.h to set density
#if defined(STM32_HIGH_DENSITY) || defined(STM32_XL_DENSITY) #if defined(STM32_HIGH_DENSITY) || defined(STM32_XL_DENSITY)
#include "HAL_sdio_STM32F1.h" #include "HAL_sdio_STM32F1.h"

2
Marlin/src/HAL/HAL_STM32F1/HAL_timers_STM32F1.cpp
View File

@ -57,7 +57,7 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
case 3: irq_num = NVIC_TIMER3; break; case 3: irq_num = NVIC_TIMER3; break;
case 4: irq_num = NVIC_TIMER4; break; case 4: irq_num = NVIC_TIMER4; break;
case 5: irq_num = NVIC_TIMER5; break; case 5: irq_num = NVIC_TIMER5; break;
#ifdef STM32_HIGH_DENSITY #if ENABLED(STM32_HIGH_DENSITY)
// 6 & 7 are basic timers, avoid them // 6 & 7 are basic timers, avoid them
case 8: irq_num = NVIC_TIMER8_CC; break; case 8: irq_num = NVIC_TIMER8_CC; break;
#endif #endif

12
Marlin/src/HAL/HAL_STM32F1/dogm/u8g_com_stm32duino_fsmc.cpp
View File

@ -119,7 +119,7 @@ __attribute__((always_inline)) __STATIC_INLINE void __DSB(void) {
#define FSMC_CS_NE1 PD7 #define FSMC_CS_NE1 PD7
#ifdef STM32_XL_DENSITY #if ENABLED(STM32_XL_DENSITY)
#define FSMC_CS_NE2 PG9 #define FSMC_CS_NE2 PG9
#define FSMC_CS_NE3 PG10 #define FSMC_CS_NE3 PG10
#define FSMC_CS_NE4 PG12 #define FSMC_CS_NE4 PG12
@ -151,7 +151,7 @@ __attribute__((always_inline)) __STATIC_INLINE void __DSB(void) {
#define FSMC_RS_A22 PE6 #define FSMC_RS_A22 PE6
#define FSMC_RS_A23 PE2 #define FSMC_RS_A23 PE2
#ifdef STM32_XL_DENSITY #if ENABLED(STM32_XL_DENSITY)
#define FSMC_RS_A24 PG13 #define FSMC_RS_A24 PG13
#define FSMC_RS_A25 PG14 #define FSMC_RS_A25 PG14
#endif #endif
@ -173,7 +173,7 @@ void LCD_IO_Init(uint8_t cs, uint8_t rs) {
switch (cs) { switch (cs) {
case FSMC_CS_NE1: controllerAddress = (uint32_t)FSMC_NOR_PSRAM_REGION1; break; case FSMC_CS_NE1: controllerAddress = (uint32_t)FSMC_NOR_PSRAM_REGION1; break;
#ifdef STM32_XL_DENSITY #if ENABLED(STM32_XL_DENSITY)
case FSMC_CS_NE2: controllerAddress = (uint32_t)FSMC_NOR_PSRAM_REGION2; break; case FSMC_CS_NE2: controllerAddress = (uint32_t)FSMC_NOR_PSRAM_REGION2; break;
case FSMC_CS_NE3: controllerAddress = (uint32_t)FSMC_NOR_PSRAM_REGION3; break; case FSMC_CS_NE3: controllerAddress = (uint32_t)FSMC_NOR_PSRAM_REGION3; break;
case FSMC_CS_NE4: controllerAddress = (uint32_t)FSMC_NOR_PSRAM_REGION4; break; case FSMC_CS_NE4: controllerAddress = (uint32_t)FSMC_NOR_PSRAM_REGION4; break;
@ -184,7 +184,7 @@ void LCD_IO_Init(uint8_t cs, uint8_t rs) {
#define _ORADDR(N) controllerAddress |= (_BV32(N) - 2) #define _ORADDR(N) controllerAddress |= (_BV32(N) - 2)
switch (rs) { switch (rs) {
#ifdef STM32_XL_DENSITY #if ENABLED(STM32_XL_DENSITY)
case FSMC_RS_A0: _ORADDR( 1); break; case FSMC_RS_A0: _ORADDR( 1); break;
case FSMC_RS_A1: _ORADDR( 2); break; case FSMC_RS_A1: _ORADDR( 2); break;
case FSMC_RS_A2: _ORADDR( 3); break; case FSMC_RS_A2: _ORADDR( 3); break;
@ -210,7 +210,7 @@ void LCD_IO_Init(uint8_t cs, uint8_t rs) {
case FSMC_RS_A21: _ORADDR(22); break; case FSMC_RS_A21: _ORADDR(22); break;
case FSMC_RS_A22: _ORADDR(23); break; case FSMC_RS_A22: _ORADDR(23); break;
case FSMC_RS_A23: _ORADDR(24); break; case FSMC_RS_A23: _ORADDR(24); break;
#ifdef STM32_XL_DENSITY #if ENABLED(STM32_XL_DENSITY)
case FSMC_RS_A24: _ORADDR(25); break; case FSMC_RS_A24: _ORADDR(25); break;
case FSMC_RS_A25: _ORADDR(26); break; case FSMC_RS_A25: _ORADDR(26); break;
#endif #endif
@ -242,7 +242,7 @@ void LCD_IO_Init(uint8_t cs, uint8_t rs) {
gpio_set_mode(PIN_MAP[cs].gpio_device, PIN_MAP[cs].gpio_bit, GPIO_AF_OUTPUT_PP); //FSMC_CS_NEx gpio_set_mode(PIN_MAP[cs].gpio_device, PIN_MAP[cs].gpio_bit, GPIO_AF_OUTPUT_PP); //FSMC_CS_NEx
gpio_set_mode(PIN_MAP[rs].gpio_device, PIN_MAP[rs].gpio_bit, GPIO_AF_OUTPUT_PP); //FSMC_RS_Ax gpio_set_mode(PIN_MAP[rs].gpio_device, PIN_MAP[rs].gpio_bit, GPIO_AF_OUTPUT_PP); //FSMC_RS_Ax
#ifdef STM32_XL_DENSITY #if ENABLED(STM32_XL_DENSITY)
FSMC_NOR_PSRAM4_BASE->BCR = FSMC_BCR_WREN | FSMC_BCR_MTYP_SRAM | FSMC_BCR_MWID_16BITS | FSMC_BCR_MBKEN; FSMC_NOR_PSRAM4_BASE->BCR = FSMC_BCR_WREN | FSMC_BCR_MTYP_SRAM | FSMC_BCR_MWID_16BITS | FSMC_BCR_MBKEN;
FSMC_NOR_PSRAM4_BASE->BTR = (FSMC_DATA_SETUP_TIME << 8) | FSMC_ADDRESS_SETUP_TIME; FSMC_NOR_PSRAM4_BASE->BTR = (FSMC_DATA_SETUP_TIME << 8) | FSMC_ADDRESS_SETUP_TIME;
#else // PSRAM1 for STM32F103V (high density) #else // PSRAM1 for STM32F103V (high density)

17
Marlin/src/feature/touch/xpt2046.cpp
View File

@ -63,9 +63,9 @@ void XPT2046::init(void) {
uint8_t XPT2046::read_buttons() { uint8_t XPT2046::read_buttons() {
int16_t tsoffsets[4] = { 0 }; int16_t tsoffsets[4] = { 0 };
static uint32_t timeout = 0; static uint32_t touchtimeout = 0;
if (PENDING(millis(), timeout)) return 0; if (PENDING(millis(), touchtimeout)) return 0;
timeout = millis() + 250; touchtimeout = millis() + 80; // ideally want to set this lower for the games... 30 or 40.
if (tsoffsets[0] + tsoffsets[1] == 0) { if (tsoffsets[0] + tsoffsets[1] == 0) {
// Not yet set, so use defines as fallback... // Not yet set, so use defines as fallback...
@ -82,12 +82,11 @@ uint8_t XPT2046::read_buttons() {
y = uint16_t(((uint32_t(getInTouch(XPT2046_Y))) * tsoffsets[2]) >> 16) + tsoffsets[3]; y = uint16_t(((uint32_t(getInTouch(XPT2046_Y))) * tsoffsets[2]) >> 16) + tsoffsets[3];
if (!isTouched()) return 0; // Fingers must still be on the TS for a valid read. if (!isTouched()) return 0; // Fingers must still be on the TS for a valid read.
if (y < 185 || y > 224) return 0; if (y < 175 || y > 234) return 0;
if (WITHIN(x, 21, 98)) encoderDiff = -(ENCODER_STEPS_PER_MENU_ITEM) * ENCODER_PULSES_PER_STEP;
else if (WITHIN(x, 121, 198)) encoderDiff = ENCODER_STEPS_PER_MENU_ITEM * ENCODER_PULSES_PER_STEP;
else if (WITHIN(x, 221, 298)) return EN_C;
if (WITHIN(x, 11, 109)) encoderDiff = -(ENCODER_STEPS_PER_MENU_ITEM) * ENCODER_PULSES_PER_STEP;
else if (WITHIN(x, 111, 209)) encoderDiff = ENCODER_STEPS_PER_MENU_ITEM * ENCODER_PULSES_PER_STEP;
else if (WITHIN(x, 211, 309)) return EN_C;
return 0; return 0;
} }
@ -96,7 +95,7 @@ bool XPT2046::isTouched() {
#if PIN_EXISTS(TOUCH_INT) #if PIN_EXISTS(TOUCH_INT)
READ(TOUCH_INT_PIN) != HIGH READ(TOUCH_INT_PIN) != HIGH
#else #else
getInTouch(XPT2046_Z1) >= XPT2046_Z1_TRESHHOLD getInTouch(XPT2046_Z1) >= XPT2046_Z1_THRESHOLD
#endif #endif
); );
} }

4
Marlin/src/feature/touch/xpt2046.h
View File

@ -34,7 +34,9 @@ enum XPTCoordinate : uint8_t {
XPT2046_Z2 = 0x40 XPT2046_Z2 = 0x40
}; };
#define XPT2046_Z1_TRESHHOLD 10 #ifndef XPT2046_Z1_THRESHOLD
#define XPT2046_Z1_THRESHOLD 10
#endif
class XPT2046 { class XPT2046 {
public: public:

2
Marlin/src/pins/pins.h
View File

@ -463,7 +463,7 @@
#elif MB(BIGTREE_SKR_E3_DIP) #elif MB(BIGTREE_SKR_E3_DIP)
#include "stm32/pins_BIGTREE_SKR_E3_DIP.h" // STM32F1 env:BIGTREE_SKR_MINI #include "stm32/pins_BIGTREE_SKR_E3_DIP.h" // STM32F1 env:BIGTREE_SKR_MINI
#elif MB(JGAURORA_A5S_A1) #elif MB(JGAURORA_A5S_A1)
#include "stm32/pins_JGAURORA_A5S_A1.h" // STM32F1 env:JGAURORA_A5S_A1 #include "stm32/pins_JGAURORA_A5S_A1.h" // STM32F1 env:jgaurora_a5s_a1
#elif MB(FYSETC_AIO_II) #elif MB(FYSETC_AIO_II)
#include "stm32/pins_FYSETC_AIO_II.h" // STM32F1 env:fysetc_STM32F1 #include "stm32/pins_FYSETC_AIO_II.h" // STM32F1 env:fysetc_STM32F1
#elif MB(FYSETC_CHEETAH) #elif MB(FYSETC_CHEETAH)

43
Marlin/src/pins/stm32/pins_JGAURORA_A5S_A1.h
View File

@ -22,35 +22,30 @@
#pragma once #pragma once
/** /**
* 2017 Victor Perez Marlin for stm32f1 test * ╦╔═╗╔═╗┬ ┬┬─┐┌─┐┬─┐┌─┐╔═╗┌─┐┬─┐┬ ┬┌┬┐ ┌─┐┌─┐┌┬┐
* 2018 Modified by Pablo Crespo for Morpheus Board (https://github.com/pscrespo/Morpheus-STM32) * ║║ ╦╠═╣│ │├┬┘│ │├┬┘├─┤╠╣ │ │├┬┘│ ││││ │ │ ││││
* 2019 Modified by Roberto Mariani & Samuel Pinches for JGAurora A5S & A1 Board. * ╚╝╚═╝╩ ╩└─┘┴└─└─┘┴└─┴ ┴╚ └─┘┴└─└─┘┴ ┴o└─┘└─┘┴ ┴
* Pin assignments for 32-bit JGAurora A5S & A1
*/ */
/**
* JGAurora A5S A1 Board pin assignments
*/
#ifndef __STM32F1__ #ifndef __STM32F1__
#error "Oops! Select an STM32F1 board in 'Tools > Board.'" #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
#elif HOTENDS > 1 || E_STEPPERS > 1
#error "JGAurora 32-bit board only supports 1 hotend / E-stepper. Comment out this line to continue."
#endif #endif
#define BOARD_NAME "JGAurora A5S A1 board" #define BOARD_NAME "JGAurora A5S A1 board"
// #define STM32_XL_DENSITY // required, but should be set by platformio flags, not here! (why? not sure.) #define STM32_XL_DENSITY
// #define MCU_STM32F103ZE // not yet required
//#define MCU_STM32F103ZE // not yet required // Enable EEPROM Emulation for this board, so that we don't overwrite factory data
// #define I2C_EEPROM // AT24C64 // #define I2C_EEPROM // AT24C64
// #define E2END 0x7FFF // 64KB // #define E2END 0x7FFF // 64KB
// #define FLASH_EEPROM_EMULATION 1
// Enable EEPROM Emulation for this board // #define E2END 0xFFF // 4KB
// #define E2END uint32(EEPROM_START_ADDRESS + (EEPROM_PAGE_SIZE * 2) - 1)
//#define FLASH_EEPROM_EMULATION 1 // #define EEPROM_CHITCHAT
//#define E2END 0xFFF // 4KB // #define DEBUG_EEPROM_READWRITE
//#define E2END uint32(EEPROM_START_ADDRESS + (EEPROM_PAGE_SIZE * 2) - 1)
//#define EEPROM_CHITCHAT
//#define DEBUG_EEPROM_READWRITE
// //
// Limit Switches // Limit Switches
@ -58,6 +53,9 @@
#define X_STOP_PIN PC6 #define X_STOP_PIN PC6
#define Y_STOP_PIN PG8 #define Y_STOP_PIN PG8
#define Z_STOP_PIN PG7 #define Z_STOP_PIN PG7
//#define X_MAX_PIN PC5
//#define Y_MAX_PIN PC4
//#define Z_MAX_PIN PB0
// //
// Steppers // Steppers
@ -96,7 +94,6 @@
#define FAN_PIN PA1 #define FAN_PIN PA1
#define PS_ON_PIN PA0
#define FIL_RUNOUT_PIN PC7 #define FIL_RUNOUT_PIN PC7
// //
@ -106,6 +103,10 @@
#define FSMC_CS_PIN PD7 #define FSMC_CS_PIN PD7
#define FSMC_RS_PIN PG0 #define FSMC_RS_PIN PG0
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
#define FSMC_DMA_DEV DMA2
#define FSMC_DMA_CHANNEL DMA_CH5
// //
// SD Card // SD Card
// //
@ -125,5 +126,3 @@
#define TOUCH_CS_PIN PA4 #define TOUCH_CS_PIN PA4
#define TOUCH_INT_PIN PC4 #define TOUCH_INT_PIN PC4
#endif #endif
#define NO_PAUSE_AFTER_PRINT

17
config/examples/JGAurora/A1/Configuration.h
View File

@ -73,9 +73,14 @@
// User-specified version info of this build to display in [Pronterface, etc] terminal window during // User-specified version info of this build to display in [Pronterface, etc] terminal window during
// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
// build by the user have been successfully uploaded into firmware. // build by the user have been successfully uploaded into firmware.
// ╦╔═╗╔═╗┬ ┬┬─┐┌─┐┬─┐┌─┐╔═╗┌─┐┬─┐┬ ┬┌┬┐ ┌─┐┌─┐┌┬┐
// ║║ ╦╠═╣│ │├┬┘│ │├┬┘├─┤╠╣ │ │├┬┘│ ││││ │ │ ││││
// ╚╝╚═╝╩ ╩└─┘┴└─└─┘┴└─┴ ┴╚ └─┘┴└─└─┘┴ ┴o└─┘└─┘┴ ┴
#define STRING_CONFIG_H_AUTHOR "(Roberto Mariani & Samuel Pinches)" // Who made the changes. #define STRING_CONFIG_H_AUTHOR "(Roberto Mariani & Samuel Pinches)" // Who made the changes.
#define SHOW_BOOTSCREEN #define SHOW_BOOTSCREEN
#define STRING_SPLASH_LINE1 "Marlin 2b6 (10/6/19)" // will be shown during bootup in line 1 #define STRING_SPLASH_LINE1 "JG-A1 v2.0 (29-7-19)" // will be shown during bootup in line 1
#define STRING_SPLASH_LINE2 "JGAuroraForum.com" // will be shown during bootup in line 2 #define STRING_SPLASH_LINE2 "JGAuroraForum.com" // will be shown during bootup in line 2
/** /**
@ -725,7 +730,7 @@
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 360, 150, 15, 25 } #define DEFAULT_MAX_FEEDRATE { 360, 150, 30, 40 }
/** /**
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
@ -921,7 +926,7 @@
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
// Feedrate (mm/m) for the "accurate" probe of each point // Feedrate (mm/m) for the "accurate" probe of each point
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 4)
/** /**
* Multiple Probing * Multiple Probing
@ -1330,7 +1335,7 @@
#endif #endif
// Homing speeds (mm/m) // Homing speeds (mm/m)
#define HOMING_FEEDRATE_XY (50*60) #define HOMING_FEEDRATE_XY (90*60)
#define HOMING_FEEDRATE_Z (12*60) #define HOMING_FEEDRATE_Z (12*60)
// Validate that endstops are triggered on homing moves // Validate that endstops are triggered on homing moves
@ -2036,6 +2041,7 @@
// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, A1, etc.) // FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, A1, etc.)
// //
#define FSMC_GRAPHICAL_TFT #define FSMC_GRAPHICAL_TFT
//#define PRINTER_EVENT_LEDS
//============================================================================= //=============================================================================
//============================ Other Controllers ============================ //============================ Other Controllers ============================
@ -2044,12 +2050,13 @@
// //
// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 // ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8
// //
//#define TOUCH_BUTTONS #define TOUCH_BUTTONS
#if ENABLED(TOUCH_BUTTONS) #if ENABLED(TOUCH_BUTTONS)
#define XPT2046_X_CALIBRATION 12316 #define XPT2046_X_CALIBRATION 12316
#define XPT2046_Y_CALIBRATION -8981 #define XPT2046_Y_CALIBRATION -8981
#define XPT2046_X_OFFSET -43 #define XPT2046_X_OFFSET -43
#define XPT2046_Y_OFFSET 257 #define XPT2046_Y_OFFSET 257
#define XPT2046_Z1_THRESHOLD 1
#endif #endif
// //

60
config/examples/JGAurora/A1/Configuration_adv.h
View File

@ -306,7 +306,7 @@
* *
* Define one or both of these to override the default 0-255 range. * Define one or both of these to override the default 0-255 range.
*/ */
//#define FAN_MIN_PWM 50 #define FAN_MIN_PWM 30
//#define FAN_MAX_PWM 128 //#define FAN_MAX_PWM 128
/** /**
@ -522,9 +522,9 @@
#define X_HOME_BUMP_MM 5 #define X_HOME_BUMP_MM 5
#define Y_HOME_BUMP_MM 5 #define Y_HOME_BUMP_MM 5
#define Z_HOME_BUMP_MM 2 #define Z_HOME_BUMP_MM 2
#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) #define HOMING_BUMP_DIVISOR { 5, 5, 5 } // Re-Bump Speed Divisor (Divides the Homing Feedrate)
//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially #define QUICK_HOME // If homing includes X and Y, do a diagonal move initially
//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing #define HOMING_BACKOFF_MM { 1, 1, 0 } // (mm) Move away from the endstops after homing
// When G28 is called, this option will make Y home before X // When G28 is called, this option will make Y home before X
//#define HOME_Y_BEFORE_X //#define HOME_Y_BEFORE_X
@ -654,7 +654,7 @@
// @section lcd // @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI) #if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel #define MANUAL_FEEDRATE { 60*60, 60*60, 10*60, 10*60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL) #if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
@ -862,13 +862,13 @@
#endif #endif
// Scroll a longer status message into view // Scroll a longer status message into view
//#define STATUS_MESSAGE_SCROLLING #define STATUS_MESSAGE_SCROLLING
// On the Info Screen, display XY with one decimal place when possible // On the Info Screen, display XY with one decimal place when possible
//#define LCD_DECIMAL_SMALL_XY #define LCD_DECIMAL_SMALL_XY
// The timeout (in ms) to return to the status screen from sub-menus // The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000 #define LCD_TIMEOUT_TO_STATUS 15000
// Add an 'M73' G-code to set the current percentage // Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY //#define LCD_SET_PROGRESS_MANUALLY
@ -892,12 +892,12 @@
#if ENABLED(LED_CONTROL_MENU) #if ENABLED(LED_CONTROL_MENU)
#define LED_COLOR_PRESETS // Enable the Preset Color menu option #define LED_COLOR_PRESETS // Enable the Preset Color menu option
#if ENABLED(LED_COLOR_PRESETS) #if ENABLED(LED_COLOR_PRESETS)
#define LED_USER_PRESET_RED 0 // User defined RED value #define LED_USER_PRESET_RED 255 // User defined RED value
#define LED_USER_PRESET_GREEN 255 // User defined GREEN value #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
#define LED_USER_PRESET_BLUE 255 // User defined BLUE value #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
#endif #endif
#endif // LED_CONTROL_MENU #endif // LED_CONTROL_MENU
@ -908,7 +908,7 @@
// as SD_DETECT_PIN in your board's pins definitions. // as SD_DETECT_PIN in your board's pins definitions.
// This setting should be disabled unless you are using a push button, pulling the pin to ground. // This setting should be disabled unless you are using a push button, pulling the pin to ground.
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
//#define SD_DETECT_INVERTED #define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place.
@ -982,10 +982,10 @@
#endif #endif
// This allows hosts to request long names for files and folders with M33 // This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT #define LONG_FILENAME_HOST_SUPPORT
// Enable this option to scroll long filenames in the SD card menu // Enable this option to scroll long filenames in the SD card menu
//#define SCROLL_LONG_FILENAMES #define SCROLL_LONG_FILENAMES
// Leave the heaters on after Stop Print (not recommended!) // Leave the heaters on after Stop Print (not recommended!)
//#define SD_ABORT_NO_COOLDOWN //#define SD_ABORT_NO_COOLDOWN
@ -1081,13 +1081,13 @@
*/ */
#if HAS_GRAPHICAL_LCD #if HAS_GRAPHICAL_LCD
// Show SD percentage next to the progress bar // Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT #define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME //#define XYZ_HOLLOW_FRAME
// Enable to save many cycles by drawing a hollow frame on Menu Screens // Enable to save many cycles by drawing a hollow frame on Menu Screens
#define MENU_HOLLOW_FRAME //#define MENU_HOLLOW_FRAME
// A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM.
// Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
@ -1137,7 +1137,7 @@
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar #define STATUS_HEAT_PERCENT // Show heating in a progress bar
//#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
// Frivolous Game Options // Frivolous Game Options
@ -1184,14 +1184,14 @@
#if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency. // Note: Extra time may be added to mitigate controller latency.
//#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement).
#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle.
#if ENABLED(MOVE_Z_WHEN_IDLE) #if ENABLED(MOVE_Z_WHEN_IDLE)
#define MOVE_Z_IDLE_MULTIPLICATOR 10 // Multiply 1mm by this factor for the move step size. #define MOVE_Z_IDLE_MULTIPLICATOR 10 // Multiply 1mm by this factor for the move step size.
#endif #endif
#endif #endif
//#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28
//#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping
#if ENABLED(BABYSTEP_ZPROBE_OFFSET) #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
@ -1491,23 +1491,23 @@
* Requires NOZZLE_PARK_FEATURE. * Requires NOZZLE_PARK_FEATURE.
* This feature is required for the default FILAMENT_RUNOUT_SCRIPT. * This feature is required for the default FILAMENT_RUNOUT_SCRIPT.
*/ */
//#define ADVANCED_PAUSE_FEATURE #define ADVANCED_PAUSE_FEATURE
#if ENABLED(ADVANCED_PAUSE_FEATURE) #if ENABLED(ADVANCED_PAUSE_FEATURE)
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
// This short retract is done immediately, before parking the nozzle. // This short retract is done immediately, before parking the nozzle.
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 40 // (mm/s) Unload filament feedrate. This can be pretty fast.
#define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. #define FILAMENT_CHANGE_UNLOAD_LENGTH 820 // (mm) The length of filament for a complete unload.
// For Bowden, the full length of the tube and nozzle. // For Bowden, the full length of the tube and nozzle.
// For direct drive, the full length of the nozzle. // For direct drive, the full length of the nozzle.
// Set to 0 for manual unloading. // Set to 0 for manual unloading.
#define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 40 // (mm/s) Slow move when starting load.
#define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 730 // (mm) Slow length, to allow time to insert material.
// 0 to disable start loading and skip to fast load only // 0 to disable start loading and skip to fast load only
#define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
#define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
#define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 75 // (mm) Load length of filament, from extruder gear to nozzle.
// For Bowden, the full length of the tube and nozzle. // For Bowden, the full length of the tube and nozzle.
// For direct drive, the full length of the nozzle. // For direct drive, the full length of the nozzle.
//#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted.
@ -1528,10 +1528,10 @@
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#endif #endif

18
config/examples/JGAurora/A5S/Configuration.h
View File

@ -73,9 +73,14 @@
// User-specified version info of this build to display in [Pronterface, etc] terminal window during // User-specified version info of this build to display in [Pronterface, etc] terminal window during
// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
// build by the user have been successfully uploaded into firmware. // build by the user have been successfully uploaded into firmware.
// ╦╔═╗╔═╗┬ ┬┬─┐┌─┐┬─┐┌─┐╔═╗┌─┐┬─┐┬ ┬┌┬┐ ┌─┐┌─┐┌┬┐
// ║║ ╦╠═╣│ │├┬┘│ │├┬┘├─┤╠╣ │ │├┬┘│ ││││ │ │ ││││
// ╚╝╚═╝╩ ╩└─┘┴└─└─┘┴└─┴ ┴╚ └─┘┴└─└─┘┴ ┴o└─┘└─┘┴ ┴
#define STRING_CONFIG_H_AUTHOR "(Roberto Mariani & Samuel Pinches)" // Who made the changes. #define STRING_CONFIG_H_AUTHOR "(Roberto Mariani & Samuel Pinches)" // Who made the changes.
#define SHOW_BOOTSCREEN #define SHOW_BOOTSCREEN
#define STRING_SPLASH_LINE1 "Marlin 2b6 (10/6/19)" // will be shown during bootup in line 1 #define STRING_SPLASH_LINE1 "JG-A5S v2.0 (29-7-19)" // will be shown during bootup in line 1
#define STRING_SPLASH_LINE2 "JGAuroraForum.com" // will be shown during bootup in line 2 #define STRING_SPLASH_LINE2 "JGAuroraForum.com" // will be shown during bootup in line 2
/** /**
@ -725,7 +730,7 @@
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 360, 150, 15, 25 } #define DEFAULT_MAX_FEEDRATE { 360, 150, 30, 40 }
/** /**
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
@ -921,7 +926,7 @@
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
// Feedrate (mm/m) for the "accurate" probe of each point // Feedrate (mm/m) for the "accurate" probe of each point
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 4)
/** /**
* Multiple Probing * Multiple Probing
@ -1330,7 +1335,7 @@
#endif #endif
// Homing speeds (mm/m) // Homing speeds (mm/m)
#define HOMING_FEEDRATE_XY (50*60) #define HOMING_FEEDRATE_XY (90*60)
#define HOMING_FEEDRATE_Z (12*60) #define HOMING_FEEDRATE_Z (12*60)
// Validate that endstops are triggered on homing moves // Validate that endstops are triggered on homing moves
@ -2036,7 +2041,7 @@
// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, A1, etc.) // FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, A1, etc.)
// //
#define FSMC_GRAPHICAL_TFT #define FSMC_GRAPHICAL_TFT
#define PRINTER_EVENT_LEDS //#define PRINTER_EVENT_LEDS
//============================================================================= //=============================================================================
//============================ Other Controllers ============================ //============================ Other Controllers ============================
@ -2045,12 +2050,13 @@
// //
// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 // ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8
// //
//#define TOUCH_BUTTONS #define TOUCH_BUTTONS
#if ENABLED(TOUCH_BUTTONS) #if ENABLED(TOUCH_BUTTONS)
#define XPT2046_X_CALIBRATION 12316 #define XPT2046_X_CALIBRATION 12316
#define XPT2046_Y_CALIBRATION -8981 #define XPT2046_Y_CALIBRATION -8981
#define XPT2046_X_OFFSET -43 #define XPT2046_X_OFFSET -43
#define XPT2046_Y_OFFSET 257 #define XPT2046_Y_OFFSET 257
#define XPT2046_Z1_THRESHOLD 1
#endif #endif
// //

62
config/examples/JGAurora/A5S/Configuration_adv.h
View File

@ -306,7 +306,7 @@
* *
* Define one or both of these to override the default 0-255 range. * Define one or both of these to override the default 0-255 range.
*/ */
//#define FAN_MIN_PWM 50 #define FAN_MIN_PWM 30
//#define FAN_MAX_PWM 128 //#define FAN_MAX_PWM 128
/** /**
@ -522,9 +522,9 @@
#define X_HOME_BUMP_MM 5 #define X_HOME_BUMP_MM 5
#define Y_HOME_BUMP_MM 5 #define Y_HOME_BUMP_MM 5
#define Z_HOME_BUMP_MM 2 #define Z_HOME_BUMP_MM 2
#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) #define HOMING_BUMP_DIVISOR { 5, 5, 5 } // Re-Bump Speed Divisor (Divides the Homing Feedrate)
//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially #define QUICK_HOME // If homing includes X and Y, do a diagonal move initially
//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing #define HOMING_BACKOFF_MM { 1, 1, 0 } // (mm) Move away from the endstops after homing
// When G28 is called, this option will make Y home before X // When G28 is called, this option will make Y home before X
//#define HOME_Y_BEFORE_X //#define HOME_Y_BEFORE_X
@ -654,7 +654,7 @@
// @section lcd // @section lcd
#if EITHER(ULTIPANEL, EXTENSIBLE_UI) #if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel #define MANUAL_FEEDRATE { 60*60, 60*60, 10*60, 10*60 } // Feedrates for manual moves along X, Y, Z, E from panel
#define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
#if ENABLED(ULTIPANEL) #if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
@ -862,13 +862,13 @@
#endif #endif
// Scroll a longer status message into view // Scroll a longer status message into view
//#define STATUS_MESSAGE_SCROLLING #define STATUS_MESSAGE_SCROLLING
// On the Info Screen, display XY with one decimal place when possible // On the Info Screen, display XY with one decimal place when possible
//#define LCD_DECIMAL_SMALL_XY #define LCD_DECIMAL_SMALL_XY
// The timeout (in ms) to return to the status screen from sub-menus // The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000 #define LCD_TIMEOUT_TO_STATUS 15000
// Add an 'M73' G-code to set the current percentage // Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY //#define LCD_SET_PROGRESS_MANUALLY
@ -888,16 +888,16 @@
* LED Control Menu * LED Control Menu
* Enable this feature to add LED Control to the LCD menu * Enable this feature to add LED Control to the LCD menu
*/ */
#define LED_CONTROL_MENU //#define LED_CONTROL_MENU
#if ENABLED(LED_CONTROL_MENU) #if ENABLED(LED_CONTROL_MENU)
#define LED_COLOR_PRESETS // Enable the Preset Color menu option #define LED_COLOR_PRESETS // Enable the Preset Color menu option
#if ENABLED(LED_COLOR_PRESETS) #if ENABLED(LED_COLOR_PRESETS)
#define LED_USER_PRESET_RED 0 // User defined RED value #define LED_USER_PRESET_RED 255 // User defined RED value
#define LED_USER_PRESET_GREEN 255 // User defined GREEN value #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
#define LED_USER_PRESET_BLUE 255 // User defined BLUE value #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
#define LED_USER_PRESET_WHITE 255 // User defined WHITE value #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
#define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
#endif #endif
#endif // LED_CONTROL_MENU #endif // LED_CONTROL_MENU
@ -908,7 +908,7 @@
// as SD_DETECT_PIN in your board's pins definitions. // as SD_DETECT_PIN in your board's pins definitions.
// This setting should be disabled unless you are using a push button, pulling the pin to ground. // This setting should be disabled unless you are using a push button, pulling the pin to ground.
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
//#define SD_DETECT_INVERTED #define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place.
@ -982,10 +982,10 @@
#endif #endif
// This allows hosts to request long names for files and folders with M33 // This allows hosts to request long names for files and folders with M33
//#define LONG_FILENAME_HOST_SUPPORT #define LONG_FILENAME_HOST_SUPPORT
// Enable this option to scroll long filenames in the SD card menu // Enable this option to scroll long filenames in the SD card menu
//#define SCROLL_LONG_FILENAMES #define SCROLL_LONG_FILENAMES
// Leave the heaters on after Stop Print (not recommended!) // Leave the heaters on after Stop Print (not recommended!)
//#define SD_ABORT_NO_COOLDOWN //#define SD_ABORT_NO_COOLDOWN
@ -1081,13 +1081,13 @@
*/ */
#if HAS_GRAPHICAL_LCD #if HAS_GRAPHICAL_LCD
// Show SD percentage next to the progress bar // Show SD percentage next to the progress bar
//#define DOGM_SD_PERCENT #define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME //#define XYZ_HOLLOW_FRAME
// Enable to save many cycles by drawing a hollow frame on Menu Screens // Enable to save many cycles by drawing a hollow frame on Menu Screens
#define MENU_HOLLOW_FRAME //#define MENU_HOLLOW_FRAME
// A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM.
// Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
@ -1137,7 +1137,7 @@
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar #define STATUS_HEAT_PERCENT // Show heating in a progress bar
//#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
// Frivolous Game Options // Frivolous Game Options
@ -1184,14 +1184,14 @@
#if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency. // Note: Extra time may be added to mitigate controller latency.
//#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement).
#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle.
#if ENABLED(MOVE_Z_WHEN_IDLE) #if ENABLED(MOVE_Z_WHEN_IDLE)
#define MOVE_Z_IDLE_MULTIPLICATOR 10 // Multiply 1mm by this factor for the move step size. #define MOVE_Z_IDLE_MULTIPLICATOR 10 // Multiply 1mm by this factor for the move step size.
#endif #endif
#endif #endif
//#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28
//#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping
#if ENABLED(BABYSTEP_ZPROBE_OFFSET) #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
@ -1491,23 +1491,23 @@
* Requires NOZZLE_PARK_FEATURE. * Requires NOZZLE_PARK_FEATURE.
* This feature is required for the default FILAMENT_RUNOUT_SCRIPT. * This feature is required for the default FILAMENT_RUNOUT_SCRIPT.
*/ */
//#define ADVANCED_PAUSE_FEATURE #define ADVANCED_PAUSE_FEATURE
#if ENABLED(ADVANCED_PAUSE_FEATURE) #if ENABLED(ADVANCED_PAUSE_FEATURE)
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
// This short retract is done immediately, before parking the nozzle. // This short retract is done immediately, before parking the nozzle.
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 40 // (mm/s) Unload filament feedrate. This can be pretty fast.
#define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. #define FILAMENT_CHANGE_UNLOAD_LENGTH 820 // (mm) The length of filament for a complete unload.
// For Bowden, the full length of the tube and nozzle. // For Bowden, the full length of the tube and nozzle.
// For direct drive, the full length of the nozzle. // For direct drive, the full length of the nozzle.
// Set to 0 for manual unloading. // Set to 0 for manual unloading.
#define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 40 // (mm/s) Slow move when starting load.
#define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 730 // (mm) Slow length, to allow time to insert material.
// 0 to disable start loading and skip to fast load only // 0 to disable start loading and skip to fast load only
#define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
#define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
#define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 75 // (mm) Load length of filament, from extruder gear to nozzle.
// For Bowden, the full length of the tube and nozzle. // For Bowden, the full length of the tube and nozzle.
// For direct drive, the full length of the nozzle. // For direct drive, the full length of the nozzle.
//#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted.
@ -1528,10 +1528,10 @@
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
#endif #endif

5
platformio.ini
View File

@ -478,13 +478,13 @@ lib_ignore = c1921b4
# #
# JGAurora A5S A1 (STM32F103ZET6) # JGAurora A5S A1 (STM32F103ZET6)
# #
[env:JGAURORA_A5S_A1] [env:jgaurora_a5s_a1]
platform = ststm32 platform = ststm32
framework = arduino framework = arduino
board = genericSTM32F103ZE board = genericSTM32F103ZE
extra_scripts = buildroot/share/PlatformIO/scripts/jgaurora_a5s_a1_with_bootloader.py extra_scripts = buildroot/share/PlatformIO/scripts/jgaurora_a5s_a1_with_bootloader.py
build_flags = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py build_flags = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py
${common.build_flags} -std=gnu++14 ${common.build_flags} -DSTM32F1xx -std=gnu++14
build_unflags = -std=gnu++11 build_unflags = -std=gnu++11
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1> src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
lib_deps = ${common.lib_deps} lib_deps = ${common.lib_deps}
@ -495,7 +495,6 @@ lib_ignore = c1921b4
Adafruit NeoPixel Adafruit NeoPixel
libf3e libf3e
TMC26XStepper TMC26XStepper
lib_ldf_mode = chain
monitor_speed = 250000 monitor_speed = 250000
# #