Singleton for cutting tools (#14429)
This commit is contained in:
Scott Lahteine
GitHub
99
Marlin/src/feature/spindle_laser.cpp
Normal file
99
Marlin/src/feature/spindle_laser.cpp
Normal file
@ -0,0 +1,99 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
/**
|
||||
* feature/spindle_laser.cpp
|
||||
*/
|
||||
|
||||
#include "../inc/MarlinConfig.h"
|
||||
|
||||
#if HAS_CUTTER
|
||||
|
||||
#include "spindle_laser.h"
|
||||
|
||||
SpindleLaser cutter;
|
||||
|
||||
cutter_power_t SpindleLaser::power; // = 0
|
||||
|
||||
void SpindleLaser::init() {
|
||||
OUT_WRITE(SPINDLE_LASER_ENA_PIN, !SPINDLE_LASER_ACTIVE_HIGH); // Init spindle to off
|
||||
#if ENABLED(SPINDLE_CHANGE_DIR)
|
||||
OUT_WRITE(SPINDLE_DIR_PIN, SPINDLE_INVERT_DIR ? 255 : 0); // Init rotation to clockwise (M3)
|
||||
#endif
|
||||
#if ENABLED(SPINDLE_LASER_PWM) && PIN_EXISTS(SPINDLE_LASER_PWM)
|
||||
SET_PWM(SPINDLE_LASER_PWM_PIN);
|
||||
analogWrite(SPINDLE_LASER_PWM_PIN, SPINDLE_LASER_PWM_INVERT ? 255 : 0); // set to lowest speed
|
||||
#endif
|
||||
}
|
||||
|
||||
#if ENABLED(SPINDLE_LASER_PWM)
|
||||
|
||||
/**
|
||||
* ocr_val_mode() is used for debugging and to get the points needed to compute the RPM vs ocr_val line
|
||||
*
|
||||
* it accepts inputs of 0-255
|
||||
*/
|
||||
void SpindleLaser::set_ocr(const uint8_t ocr) {
|
||||
WRITE(SPINDLE_LASER_ENA_PIN, SPINDLE_LASER_ACTIVE_HIGH); // turn spindle on (active low)
|
||||
#if ENABLED(SPINDLE_LASER_PWM)
|
||||
analogWrite(SPINDLE_LASER_PWM_PIN, (SPINDLE_LASER_PWM_INVERT) ? 255 - ocr : ocr);
|
||||
#endif
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
void SpindleLaser::update_output() {
|
||||
const bool ena = enabled();
|
||||
#if ENABLED(SPINDLE_LASER_PWM)
|
||||
if (ena) {
|
||||
constexpr float inv_slope = RECIPROCAL(SPEED_POWER_SLOPE),
|
||||
min_ocr = (SPEED_POWER_MIN - (SPEED_POWER_INTERCEPT)) * inv_slope, // Minimum allowed
|
||||
max_ocr = (SPEED_POWER_MAX - (SPEED_POWER_INTERCEPT)) * inv_slope; // Maximum allowed
|
||||
int16_t ocr_val;
|
||||
if (power <= SPEED_POWER_MIN) ocr_val = min_ocr; // Use minimum if set below
|
||||
else if (power >= SPEED_POWER_MAX) ocr_val = max_ocr; // Use maximum if set above
|
||||
else ocr_val = (power - (SPEED_POWER_INTERCEPT)) * inv_slope; // Use calculated OCR value
|
||||
set_ocr(ocr_val & 0xFF); // ...limited to Atmel PWM max
|
||||
}
|
||||
else { // Convert RPM to PWM duty cycle
|
||||
WRITE(SPINDLE_LASER_ENA_PIN, !SPINDLE_LASER_ACTIVE_HIGH); // Turn spindle off (active low)
|
||||
analogWrite(SPINDLE_LASER_PWM_PIN, SPINDLE_LASER_PWM_INVERT ? 255 : 0); // Only write low byte
|
||||
}
|
||||
#else
|
||||
WRITE(SPINDLE_LASER_ENA_PIN, ena ? SPINDLE_LASER_ACTIVE_HIGH : !SPINDLE_LASER_ACTIVE_HIGH);
|
||||
#endif
|
||||
power_delay(ena);
|
||||
}
|
||||
|
||||
#if ENABLED(SPINDLE_CHANGE_DIR)
|
||||
|
||||
void SpindleLaser::set_direction(const bool reverse) {
|
||||
const bool dir_state = (reverse == SPINDLE_INVERT_DIR); // Forward (M3) HIGH when not inverted
|
||||
#if ENABLED(SPINDLE_STOP_ON_DIR_CHANGE)
|
||||
if (enabled() && READ(SPINDLE_DIR_PIN) != dir_state) disable();
|
||||
#endif
|
||||
WRITE(SPINDLE_DIR_PIN, dir_state);
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
#endif // HAS_CUTTER
|
||||
83
Marlin/src/feature/spindle_laser.h
Normal file
83
Marlin/src/feature/spindle_laser.h
Normal file
@ -0,0 +1,83 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* feature/spindle_laser.h
|
||||
* Support for Laser Power or Spindle Power & Direction
|
||||
*/
|
||||
|
||||
#include "../inc/MarlinConfig.h"
|
||||
|
||||
#if ENABLED(SPINDLE_FEATURE)
|
||||
#define _MSG_CUTTER(M) MSG_SPINDLE_##M
|
||||
#else
|
||||
#define _MSG_CUTTER(M) MSG_LASER_##M
|
||||
#endif
|
||||
#define MSG_CUTTER(M) _MSG_CUTTER(M)
|
||||
|
||||
#if SPEED_POWER_MAX > 255
|
||||
#define cutter_power_t uint16_t
|
||||
#define CUTTER_MENU_TYPE uint16_5
|
||||
#else
|
||||
#define cutter_power_t uint8_t
|
||||
#define CUTTER_MENU_TYPE uint8
|
||||
#endif
|
||||
|
||||
class SpindleLaser {
|
||||
public:
|
||||
static cutter_power_t power;
|
||||
|
||||
static void init();
|
||||
|
||||
static inline bool enabled() { return !!power; }
|
||||
|
||||
static inline void set_power(const uint8_t pwr) { power = pwr; update_output(); }
|
||||
|
||||
static inline void set_enabled(const bool enable) { set_power(enable ? 255 : 0); }
|
||||
|
||||
//static bool active() { return READ(SPINDLE_LASER_ENA_PIN) == SPINDLE_LASER_ACTIVE_HIGH; }
|
||||
|
||||
#if ENABLED(SPINDLE_LASER_PWM)
|
||||
static void update_output();
|
||||
static void set_ocr(const uint8_t ocr);
|
||||
static inline void set_ocr_power(const uint8_t pwr) { power = pwr; set_ocr(pwr); }
|
||||
#else
|
||||
static inline void update_output() { }
|
||||
#endif
|
||||
|
||||
// Wait for spindle to spin up or spin down
|
||||
static inline void power_delay(const bool on) { safe_delay(on ? SPINDLE_LASER_POWERUP_DELAY : SPINDLE_LASER_POWERDOWN_DELAY); }
|
||||
|
||||
#if ENABLED(SPINDLE_CHANGE_DIR)
|
||||
static void set_direction(const bool reverse);
|
||||
#else
|
||||
static inline void set_direction(const bool reverse) { UNUSED(reverse); }
|
||||
#endif
|
||||
|
||||
static inline void disable() { set_enabled(false); }
|
||||
static inline void enable_forward() { set_direction(false); set_enabled(true); }
|
||||
static inline void enable_reverse() { set_direction(true); set_enabled(true); }
|
||||
|
||||
};
|
||||
|
||||
extern SpindleLaser cutter;
|
||||
Reference in New Issue
Block a user