bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

EXP header pin numbers redux (#24525)

Browse Source 
Followup to 504fec98
This commit is contained in:
Scott Lahteine
2022-07-20 16:26:33 -05:00
parent feafa321d7
commit d726f641a5
51 changed files with 894 additions and 893 deletions
Download Patch File Download Diff File Expand all files Collapse all files

32
Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h
View File

@ -234,28 +234,28 @@
*
* Board Display
* ------ ------
* (SD_DET) PA15 | 1 2 | PB6 (BEEPER) 5V | 1 2 | GND
* (MOD_RESET) PA9 | 3 4 | RESET (RESET) | 3 4 | (SD_DET)
* (SD_CS) PA10 5 6 | PB9 (MOSI) 5 6 | (LCD_CS)
* (LCD_CS) PB8 | 7 8 | PB7 (SD_CS) | 7 8 | (MOD_RESET)
* GND | 9 10 | 5V (SCK) | 9 10 | (MISO)
* (SD_DET) PA15 | 1 2 | PB6 (BEEPER) 5V |10 9 | GND
* (MOD_RESET) PA9 | 3 4 | RESET (RESET) | 8 7 | (SD_DET)
* (SD_CS) PA10 5 6 | PB9 (MOSI) 6 5 | (LCD_CS)
* (LCD_CS) PB8 | 7 8 | PB7 (SD_CS) | 4 3 | (MOD_RESET)
* GND | 9 10 | 5V (SCK) | 2 1 | (MISO)
* ------ ------
* EXP1 EXP1
*
* Needs custom cable:
*
* Board Adapter Display
* _________
* EXP1-1 ----------- EXP1-10
* EXP1-2 ----------- EXP1-9
* SPI1-4 ----------- EXP1-6
* EXP1-4 ----------- EXP1-5
* SP11-3 ----------- EXP1-2
* EXP1-6 ----------- EXP1-4
* EXP1-7 ----------- EXP1-8
* EXP1-8 ----------- EXP1-3
* SPI1-1 ----------- EXP1-1
* EXP1-10 ----------- EXP1-7
* ----------------------------------
* EXP1-10 ---------- EXP1-10 5V
* EXP1-9 ----------- EXP1-9 GND
* SPI1-4 ----------- EXP1-6 MOSI
* EXP1-7 ----------- EXP1-5 LCD_CS
* SP11-3 ----------- EXP1-2 SCK
* EXP1-5 ----------- EXP1-4 SD_CS
* EXP1-4 ----------- EXP1-8 RESET
* EXP1-3 ----------- EXP1-3 MOD_RST
* SPI1-1 ----------- EXP1-1 MISO
* EXP1-1 ----------- EXP1-7 SD_DET
*/
#define CLCD_SPI_BUS 1 // SPI1 connector

147
Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h
View File

@ -129,21 +129,21 @@
* EXP1 EXP1
*/
#ifdef SKR_MINI_E3_V2
#define EXP1_9 PA15
#define EXP1_3 PB15
#define EXP1_02_PIN PA15
#define EXP1_08_PIN PB15
#else
#define EXP1_9 PB6
#define EXP1_3 PB7
#define EXP1_02_PIN PB6
#define EXP1_08_PIN PB7
#endif
#if HAS_DWIN_E3V2 || IS_DWIN_MARLINUI
/**
* ------ ------ ------
* (ENT) | 1 2 | (BEEP) | 1 2 | | 1 2 |
* (RX) | 3 4 | (RX) | 3 4 | (TX) RX | 3 4 | TX
* (TX) 5 6 | (ENT) 5 6 | (BEEP) ENT | 5 6 | BEEP
* (B) | 7 8 | (A) (B) | 7 8 | (A) B | 7 8 | A
* GND | 9 10 | (VCC) GND | 9 10 | VCC GND | 9 10 | VCC
* (ENT) | 1 2 | (BEEP) |10 9 | |10 9 |
* (RX) | 3 4 | (RX) | 8 7 | (TX) RX | 8 7 | TX
* (TX) 5 6 | (ENT) 6 5 | (BEEP) ENT | 6 5 | BEEP
* (B) | 7 8 | (A) (B) | 4 3 | (A) B | 4 3 | A
* GND | 9 10 | (VCC) GND | 2 1 | VCC GND | 2 1 | VCC
* ------ ------ ------
* EXP1 DWIN DWIN (plug)
*
@ -154,8 +154,8 @@
#error "CAUTION! Ender-3 V2 display requires a custom cable. See 'pins_BTT_SKR_MINI_E3_common.h' for details. (Define NO_CONTROLLER_CUSTOM_WIRING_WARNING to suppress this warning.)"
#endif
#define BEEPER_PIN EXP1_9
#define BTN_EN1 EXP1_3
#define BEEPER_PIN EXP1_02_PIN
#define BTN_EN1 EXP1_08_PIN
#define BTN_EN2 PB8
#define BTN_ENC PB5
@ -164,13 +164,13 @@
#if ENABLED(CR10_STOCKDISPLAY)
#define BEEPER_PIN PB5
#define BTN_ENC EXP1_9
#define BTN_ENC EXP1_02_PIN
#define BTN_EN1 PA9
#define BTN_EN2 PA10
#define LCD_PINS_RS PB8
#define LCD_PINS_ENABLE EXP1_3
#define LCD_PINS_ENABLE EXP1_08_PIN
#define LCD_PINS_D4 PB9
#elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD!
@ -180,7 +180,7 @@
#endif
#define LCD_PINS_RS PB9
#define LCD_PINS_ENABLE EXP1_9
#define LCD_PINS_ENABLE EXP1_02_PIN
#define LCD_PINS_D4 PB8
#define LCD_PINS_D5 PA10
#define LCD_PINS_D6 PA9
@ -189,14 +189,14 @@
#elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
#define BTN_ENC EXP1_9
#define BTN_ENC EXP1_02_PIN
#define BTN_EN1 PA9
#define BTN_EN2 PA10
#define DOGLCD_CS PB8
#define DOGLCD_A0 PB9
#define DOGLCD_SCK PB5
#define DOGLCD_MOSI EXP1_3
#define DOGLCD_MOSI EXP1_08_PIN
#define FORCE_SOFT_SPI
#define LCD_BACKLIGHT_PIN -1
@ -214,28 +214,28 @@
*
* Board Display
* ------ ------
* (SD_DET) PB5 | 1 2 | PB6 (BEEPER) 5V | 1 2 | GND
* (MOD_RESET) PA9 | 3 4 | RESET -- | 3 4 | (SD_DET)
* (SD_CS) PA10 5 6 | PB9 (MOSI) | 5 6 | --
* (LCD_CS) PB8 | 7 8 | PB7 (SD_CS) | 7 8 | (LCD_CS)
* GND | 9 10 | 5V (SCK) | 9 10 | (MISO)
* (SD_DET) PB5 | 1 2 | PB6 (BEEPER) 5V |10 9 | GND
* (MOD_RESET) PA9 | 3 4 | RESET -- | 8 7 | (SD_DET)
* (SD_CS) PA10 5 6 | PB9 (MOSI) | 6 5 | --
* (LCD_CS) PB8 | 7 8 | PB7 (SD_CS) | 4 3 | (LCD_CS)
* GND | 9 10 | 5V (SCK) | 2 1 | (MISO)
* ------ ------
* EXP1 EXP1
*
* Needs custom cable:
*
* Board Display
*
* EXP1-1 ----------- EXP1-10
* EXP1-2 ----------- EXP1-9
* SPI1-4 ----------- EXP1-6
* EXP1-4 ----------- FREE
* SPI1-3 ----------- EXP1-2
* EXP1-6 ----------- EXP1-4
* EXP1-7 ----------- FREE
* EXP1-8 ----------- EXP1-3
* SPI1-1 ----------- EXP1-1
* EXP1-10 ----------- EXP1-7
* Board Adapter Display
* ----------------------------------
* EXP1-10 ---------- EXP1-10 5V
* EXP1-9 ----------- EXP1-9 GND
* SPI1-4 ----------- EXP1-6 MOSI
* EXP1-7 ----------- n/c
* SPI1-3 ----------- EXP1-2 SCK
* EXP1-5 ----------- EXP1-4 SD_CS
* EXP1-4 ----------- n/c
* EXP1-3 ----------- EXP1-3 LCD_CS
* SPI1-1 ----------- EXP1-1 MISO
* EXP1-1 ----------- EXP1-7 SD_DET
*/
#define TFTGLCD_CS PA9
@ -253,20 +253,20 @@
*
* Board Display
* ------ ------
* PB5 | 1 2 | PA15 (BEEP) | 1 2 | BTN_ENC
* PA9 | 3 4 | RESET LCD_CS | 3 4 | LCD A0
* PA10 | 5 6 | PB9 LCD_RST | 5 6 | RED
* PB8 | 7 8 | PB15 (GREEN) | 7 8 | (BLUE)
* GND | 9 10 | 5V GND | 9 10 | 5V
* PB5 | 1 2 | PA15 (BEEP) |10 9 | BTN_ENC
* PA9 | 3 4 | RESET LCD_CS | 8 7 | LCD A0
* PA10 | 5 6 | PB9 LCD_RST | 6 5 | RED
* PB8 | 7 8 | PB15 (GREEN) | 4 3 | (BLUE)
* GND | 9 10 | 5V GND | 2 1 | 5V
* ------ ------
* EXP1 EXP1
*
* --- ------
* RST | 1 | (MISO) | 1 2 | SCK
* (RX2) PA2 | 2 | BTN_EN1 | 3 4 | (SS)
* (TX2) PA3 | 3 | BTN_EN2 | 5 6 | MOSI
* GND | 4 | (CD) | 7 8 | (RST)
* 5V | 5 | (GND) | 9 10 | (KILL)
* RST | 1 | (MISO) |10 9 | SCK
* (RX2) PA2 | 2 | BTN_EN1 | 8 7 | (SS)
* (TX2) PA3 | 3 | BTN_EN2 | 6 5 | MOSI
* GND | 4 | (CD) | 4 3 | (RST)
* 5V | 5 | (GND) | 2 1 | (KILL)
* --- ------
* TFT EXP2
*
@ -274,18 +274,19 @@
*
* Board Display
*
* EXP1-1 ----------- EXP1-1
* EXP1-2 ----------- EXP1-2
* EXP1-3 ----------- EXP2-6
* EXP1-4 ----------- EXP1-5
* EXP1-5 ----------- EXP2-8
* EXP1-6 ----------- EXP1-6
* EXP1-8 ----------- EXP1-8
* EXP1-9 ----------- EXP1-9
* EXP1-10 ----------- EXP1-7
* EXP1-10 ---------- EXP1-1 5V
* EXP1-9 ----------- EXP1-2 GND
* EXP1-8 ----------- EXP2-6 EN2
* EXP1-7 ----------- EXP1-5 RED
* EXP1-6 ----------- EXP2-8 EN1
* EXP1-5 ----------- EXP1-6 LCD_RST
* EXP1-4 ----------- n/c
* EXP1-3 ----------- EXP1-8 LCD_CS
* EXP1-2 ----------- EXP1-9 ENC
* EXP1-1 ----------- EXP1-7 LCD_A0
*
* TFT-2 ----------- EXP2-9
* TFT-3 ----------- EXP2-5
* TFT-2 ----------- EXP2-9 SCK
* TFT-3 ----------- EXP2-5 MOSI
*
* for backlight configuration see steps 2 (V2.1) and 3 in https://wiki.fysetc.com/Mini12864_Panel/
*/
@ -325,33 +326,33 @@
*
* Board Display
* ------ ------
* (SD_DET) PB5 | 1 2 | PB6 (BEEPER) 5V | 1 2 | GND
* (MOD_RESET) PA9 | 3 4 | RESET (RESET) | 3 4 | (SD_DET)
* (SD_CS) PA10 5 6 | PB9 (MOSI) | 5 6 | (LCD_CS)
* (LCD_CS) PB8 | 7 8 | PB7 (SD_CS) | 7 8 | (MOD_RESET)
* GND | 9 10 | 5V (SCK) | 9 10 | (MISO)
* (SD_DET) PB5 | 1 2 | PB6 (BEEPER) 5V |10 9 | GND
* (MOD_RESET) PA9 | 3 4 | RESET (RESET) | 8 7 | (SD_DET)
* (SD_CS) PA10 5 6 | PB9 (MOSI) | 6 5 | (LCD_CS)
* (LCD_CS) PB8 | 7 8 | PB7 (SD_CS) | 4 3 | (MOD_RESET)
* GND | 9 10 | 5V (SCK) | 2 1 | (MISO)
* ------ ------
* EXP1 EXP1
*
* Needs custom cable:
*
* Board Adapter Display
* _________
* EXP1-1 ----------- EXP1-10
* EXP1-2 ----------- EXP1-9
* SPI1-4 ----------- EXP1-6
* EXP1-4 ----------- EXP1-5
* SPI1-3 ----------- EXP1-2
* EXP1-6 ----------- EXP1-4
* EXP1-7 ----------- EXP1-8
* EXP1-8 ----------- EXP1-3
* SPI1-1 ----------- EXP1-1
* EXP1-10 ----------- EXP1-7
* ----------------------------------
* EXP1-10 ---------- EXP1-10 5V
* EXP1-9 ----------- EXP1-9 GND
* SPI1-4 ----------- EXP1-6 MOSI
* EXP1-7 ----------- EXP1-5 LCD_CS
* SPI1-3 ----------- EXP1-2 SCK
* EXP1-5 ----------- EXP1-4 SD_CS
* EXP1-4 ----------- EXP1-8 RESET
* EXP1-3 ----------- EXP1-3 MOD_RST
* SPI1-1 ----------- EXP1-1 MISO
* EXP1-1 ----------- EXP1-7 SD_DET
*/
#define CLCD_SPI_BUS 1 // SPI1 connector
#define CLCD_SPI_BUS 1 // SPI1 connector
#define BEEPER_PIN EXP1_9
#define BEEPER_PIN EXP1_02_PIN
#define CLCD_MOD_RESET PA9
#define CLCD_SPI_CS PB8
@ -375,7 +376,7 @@
#error "SD CUSTOM_CABLE is not compatible with SKR Mini E3."
#endif
#define ONBOARD_SPI_DEVICE 1 // SPI1 -> used only by HAL/STM32F1...
#define ONBOARD_SPI_DEVICE 1 // SPI1 -> used only by HAL/STM32F1...
#define ONBOARD_SD_CS_PIN PA4 // Chip select for "System" SD card
#define ENABLE_SPI1

28
Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h
View File

@ -119,23 +119,23 @@
* ------ ------
* EXP1 EXP2
*/
#define EXP1_08_PIN PC14
#define EXP1_07_PIN PC15
#define EXP1_06_PIN PB7
#define EXP1_05_PIN PC13
#define EXP1_04_PIN PC12
#define EXP1_03_PIN PB6
#define EXP1_02_PIN PC11
#define EXP1_01_PIN PC10
#define EXP1_02_PIN PC11
#define EXP1_03_PIN PB6
#define EXP1_04_PIN PC12
#define EXP1_05_PIN PC13
#define EXP1_06_PIN PB7
#define EXP1_07_PIN PC15
#define EXP1_08_PIN PC14
#define EXP2_08_PIN -1 // RESET
#define EXP2_07_PIN PB9
#define EXP2_06_PIN PB5
#define EXP2_05_PIN PB8
#define EXP2_04_PIN PA15
#define EXP2_03_PIN PD2
#define EXP2_02_PIN PB3
#define EXP2_01_PIN PB4
#define EXP2_02_PIN PB3
#define EXP2_03_PIN PD2
#define EXP2_04_PIN PA15
#define EXP2_05_PIN PB8
#define EXP2_06_PIN PB5
#define EXP2_07_PIN PB9
#define EXP2_08_PIN -1 // RESET
//
// LCD / Controller

14
Marlin/src/pins/stm32f1/pins_CCROBOT_MEEB_3DP.h
View File

@ -131,14 +131,14 @@
* ------
* EXP1
*/
#define EXP1_08_PIN PA4
#define EXP1_07_PIN PB7
#define EXP1_06_PIN PB8
#define EXP1_05_PIN PA3
#define EXP1_04_PIN -1 // RESET
#define EXP1_03_PIN PA2
#define EXP1_02_PIN PB6
#define EXP1_01_PIN PB5
#define EXP1_02_PIN PB6
#define EXP1_03_PIN PA2
#define EXP1_04_PIN -1 // RESET
#define EXP1_05_PIN PA3
#define EXP1_06_PIN PB8
#define EXP1_07_PIN PB7
#define EXP1_08_PIN PA4
//
// LCD / Controller

70
Marlin/src/pins/stm32f1/pins_CREALITY_V4.h
View File

@ -176,17 +176,17 @@
* ------
* EXP1
*/
#define EXP1_03_PIN PB15
#define EXP1_04_PIN PB12
#define EXP1_05_PIN PB13
#define EXP1_06_PIN PB14
#define EXP1_07_PIN PE8
#define EXP1_08_PIN PB10
#define EXP1_09_PIN PB2
#define EXP1_10_PIN PC6
#define EXP1_01_PIN PC6
#define EXP1_02_PIN PB2
#define EXP1_03_PIN PB10
#define EXP1_04_PIN PE8
#define EXP1_05_PIN PB14
#define EXP1_06_PIN PB13
#define EXP1_07_PIN PB12
#define EXP1_08_PIN PB15
#ifndef HAS_PIN_27_BOARD
#define BEEPER_PIN EXP1_10_PIN
#define BEEPER_PIN EXP1_01_PIN
#endif
#elif ENABLED(VET6_12864_LCD)
@ -202,50 +202,50 @@
* ------
* EXP1
*/
#define EXP1_03_PIN PA7
#define EXP1_04_PIN PA4
#define EXP1_05_PIN PA5
#define EXP1_06_PIN PA6
#define EXP1_07_PIN -1
#define EXP1_08_PIN PB10
#define EXP1_09_PIN PC5
#define EXP1_10_PIN -1
#define EXP1_01_PIN -1
#define EXP1_02_PIN PC5
#define EXP1_03_PIN PB10
#define EXP1_04_PIN -1
#define EXP1_05_PIN PA6
#define EXP1_06_PIN PA5
#define EXP1_07_PIN PA4
#define EXP1_08_PIN PA7
#else
#error "Define RET6_12864_LCD or VET6_12864_LCD to select pins for CR10_STOCKDISPLAY with the Creality V4 controller."
#endif
#define LCD_PINS_RS EXP1_04_PIN
#define LCD_PINS_ENABLE EXP1_03_PIN
#define LCD_PINS_D4 EXP1_05_PIN
#define LCD_PINS_RS EXP1_07_PIN
#define LCD_PINS_ENABLE EXP1_08_PIN
#define LCD_PINS_D4 EXP1_06_PIN
#define BTN_ENC EXP1_09_PIN
#define BTN_EN1 EXP1_08_PIN
#define BTN_EN2 EXP1_06_PIN
#define BTN_ENC EXP1_02_PIN
#define BTN_EN1 EXP1_03_PIN
#define BTN_EN2 EXP1_05_PIN
#elif ANY(HAS_DWIN_E3V2, IS_DWIN_MARLINUI, DWIN_VET6_CREALITY_LCD)
#if HAS_DWIN_E3V2 || IS_DWIN_MARLINUI
// RET6 DWIN ENCODER LCD
#define EXP1_03_PIN PB15
#define EXP1_04_PIN PB12
#define EXP1_05_PIN PB13
#define EXP1_06_PIN PB14
#define EXP1_05_PIN PB14
#define EXP1_06_PIN PB13
#define EXP1_07_PIN PB12
#define EXP1_08_PIN PB15
//#define LCD_LED_PIN PB2
#else
// VET6 DWIN ENCODER LCD
#define EXP1_03_PIN PA7
#define EXP1_04_PIN PA4
#define EXP1_05_PIN PA5
#define EXP1_06_PIN PA6
#define EXP1_05_PIN PA6
#define EXP1_06_PIN PA5
#define EXP1_07_PIN PA4
#define EXP1_08_PIN PA7
#endif
#define BTN_ENC EXP1_06_PIN
#define BTN_EN1 EXP1_03_PIN
#define BTN_EN2 EXP1_04_PIN
#define BTN_ENC EXP1_05_PIN
#define BTN_EN1 EXP1_08_PIN
#define BTN_EN2 EXP1_07_PIN
#ifndef BEEPER_PIN
#define BEEPER_PIN EXP1_05_PIN
#define BEEPER_PIN EXP1_06_PIN
#endif
#endif

28
Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h
View File

@ -158,14 +158,14 @@
* ------
* EXP1
*/
#define EXP1_08_PIN PB15
#define EXP1_07_PIN PB12
#define EXP1_06_PIN PB13
#define EXP1_05_PIN PB14
#define EXP1_04_PIN PE8
#define EXP1_03_PIN PB10
#define EXP1_02_PIN PB2
#define EXP1_01_PIN PC6
#define EXP1_02_PIN PB2
#define EXP1_03_PIN PB10
#define EXP1_04_PIN PE8
#define EXP1_05_PIN PB14
#define EXP1_06_PIN PB13
#define EXP1_07_PIN PB12
#define EXP1_08_PIN PB15
#define BEEPER_PIN EXP1_01_PIN
@ -182,14 +182,14 @@
* ------
* EXP1
*/
#define EXP1_08_PIN PA7
#define EXP1_07_PIN PA4
#define EXP1_06_PIN PA5
#define EXP1_05_PIN PA6
#define EXP1_04_PIN -1
#define EXP1_03_PIN PB10
#define EXP1_02_PIN PC5
#define EXP1_01_PIN -1
#define EXP1_02_PIN PC5
#define EXP1_03_PIN PB10
#define EXP1_04_PIN -1
#define EXP1_05_PIN PA6
#define EXP1_06_PIN PA5
#define EXP1_07_PIN PA4
#define EXP1_08_PIN PA7
#else
#error "Define RET6_12864_LCD or VET6_12864_LCD to select pins for CR10_STOCKDISPLAY with the Creality V4 controller."

28
Marlin/src/pins/stm32f1/pins_FLY_MINI.h
View File

@ -131,23 +131,23 @@
* ------ ------
* EXP1 EXP2
*/
#define EXP1_08_PIN PB4
#define EXP1_07_PIN PB5
#define EXP1_06_PIN PB6
#define EXP1_05_PIN PB7
#define EXP1_04_PIN PB8
#define EXP1_03_PIN PB9
#define EXP1_02_PIN PC13
#define EXP1_01_PIN PC14
#define EXP1_02_PIN PC13
#define EXP1_03_PIN PB9
#define EXP1_04_PIN PB8
#define EXP1_05_PIN PB7
#define EXP1_06_PIN PB6
#define EXP1_07_PIN PB5
#define EXP1_08_PIN PB4
#define EXP2_08_PIN -1 // RESET
#define EXP2_07_PIN PB11
#define EXP2_06_PIN PB15
#define EXP2_05_PIN PD2
#define EXP2_04_PIN PB12
#define EXP2_03_PIN PB3
#define EXP2_02_PIN PB13
#define EXP2_01_PIN PB14
#define EXP2_02_PIN PB13
#define EXP2_03_PIN PB3
#define EXP2_04_PIN PB12
#define EXP2_05_PIN PD2
#define EXP2_06_PIN PB15
#define EXP2_07_PIN PB11
#define EXP2_08_PIN -1 // RESET
//
// LCD / Controller

14
Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h
View File

@ -146,14 +146,14 @@
* - Functionally the pins are assigned in the same order as on the Ender-3 board.
* - Pin 4 on the Cheetah board is assigned to an I/O, it is assigned to RESET on the Ender-3 board.
*/
#define EXP1_08_PIN PB15
#define EXP1_07_PIN PB12
#define EXP1_06_PIN PB13
#define EXP1_05_PIN PC10
#define EXP1_04_PIN PB14
#define EXP1_03_PIN PC11
#define EXP1_02_PIN PC12
#define EXP1_01_PIN PC9
#define EXP1_02_PIN PC12
#define EXP1_03_PIN PC11
#define EXP1_04_PIN PB14
#define EXP1_05_PIN PC10
#define EXP1_06_PIN PB13
#define EXP1_07_PIN PB12
#define EXP1_08_PIN PB15
#if HAS_WIRED_LCD
#define BEEPER_PIN EXP1_01_PIN

28
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h
View File

@ -215,23 +215,23 @@
* ------ ------
* EXP1 EXP2
*/
#define EXP1_08_PIN PD10
#define EXP1_07_PIN PD11
#define EXP1_06_PIN PE15
#define EXP1_05_PIN PE14
#define EXP1_04_PIN PC6
#define EXP1_03_PIN PD13
#define EXP1_02_PIN PE13
#define EXP1_01_PIN PC5
#define EXP1_02_PIN PE13
#define EXP1_03_PIN PD13
#define EXP1_04_PIN PC6
#define EXP1_05_PIN PE14
#define EXP1_06_PIN PE15
#define EXP1_07_PIN PD11
#define EXP1_08_PIN PD10
#define EXP2_08_PIN -1
#define EXP2_07_PIN PE12
#define EXP2_06_PIN PA7
#define EXP2_05_PIN PE11
#define EXP2_04_PIN PE10
#define EXP2_03_PIN PE8
#define EXP2_02_PIN PA5
#define EXP2_01_PIN PA6
#define EXP2_02_PIN PA5
#define EXP2_03_PIN PE8
#define EXP2_04_PIN PE10
#define EXP2_05_PIN PE11
#define EXP2_06_PIN PA7
#define EXP2_07_PIN PE12
#define EXP2_08_PIN -1
//
// SD Card

42
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h
View File

@ -149,33 +149,33 @@
* ------ ------ ------
* EXP1 EXP2 "Ender-3 EXP1"
*/
#define EXP1_08_PIN PC5
#define EXP1_07_PIN PC4
#define EXP1_06_PIN PA7
#define EXP1_05_PIN PA6
#define EXP1_04_PIN PA5
#define EXP1_03_PIN PA4
#define EXP1_02_PIN PC3
#define EXP1_01_PIN PC1
#define EXP1_02_PIN PC3
#define EXP1_03_PIN PA4
#define EXP1_04_PIN PA5
#define EXP1_05_PIN PA6
#define EXP1_06_PIN PA7
#define EXP1_07_PIN PC4
#define EXP1_08_PIN PC5
#define EXP2_08_PIN -1 // RESET
#define EXP2_07_PIN PC10
#define EXP2_06_PIN PB15
#define EXP2_05_PIN PB0
#define EXP2_04_PIN PA15
#define EXP2_03_PIN PB11
#define EXP2_02_PIN PB13
#define EXP2_01_PIN PB14
#define EXP2_02_PIN PB13
#define EXP2_03_PIN PB11
#define EXP2_04_PIN PA15
#define EXP2_05_PIN PB0
#define EXP2_06_PIN PB15
#define EXP2_07_PIN PC10
#define EXP2_08_PIN -1 // RESET
// "Ender-3 EXP1"
#define EXP3_08_PIN PA4
#define EXP3_07_PIN PA5
#define EXP3_06_PIN PA6
#define EXP3_05_PIN PB0
#define EXP3_04_PIN -1 // RESET
#define EXP3_03_PIN PB11
#define EXP3_02_PIN PC3
#define EXP3_01_PIN PC1
#define EXP3_02_PIN PC3
#define EXP3_03_PIN PB11
#define EXP3_04_PIN -1 // RESET
#define EXP3_05_PIN PB0
#define EXP3_06_PIN PA6
#define EXP3_07_PIN PA5
#define EXP3_08_PIN PA4
#if HAS_WIRED_LCD

18
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h
View File

@ -88,16 +88,16 @@
* ------
* "E3" EXP1
*/
#define EXP3_10_PIN -1 // 5V
#define EXP3_09_PIN -1 // GND
#define EXP3_08_PIN PC2
#define EXP3_07_PIN PC3
#define EXP3_06_PIN PC1
#define EXP3_05_PIN PB4
#define EXP3_04_PIN PA11 // RESET?
#define EXP3_03_PIN PB5
#define EXP3_02_PIN PB3
#define EXP3_01_PIN PD2
#define EXP3_02_PIN PB3
#define EXP3_03_PIN PB5
#define EXP3_04_PIN PA11 // RESET?
#define EXP3_05_PIN PB4
#define EXP3_06_PIN PC1
#define EXP3_07_PIN PC3
#define EXP3_08_PIN PC2
#define EXP3_09_PIN -1 // GND
#define EXP3_10_PIN -1 // 5V
//
// LCD Pins

40
Marlin/src/pins/stm32f1/pins_PANDA_PI_V29.h
View File

@ -179,30 +179,30 @@
/** FYSETC TFT TFT81050 display pinout
*
* Board Display
* ----- -----
* 5V | 1 2 | GND (SPI1-MISO) MISO | 1 2 | SCK (SPI1-SCK)
* (FREE) PB7 | 3 4 | PB8 (LCD_CS) (PA9) MOD_RESET | 3 4 | SD_CS (PA10)
* (FREE) PB9 | 5 6 PA10 (SD_CS) (PB8) LCD_CS | 5 6 MOSI (SPI1-MOSI)
* RESET | 7 8 | PA9 (MOD_RESET) (PA15) SD_DET | 7 8 | RESET
* (BEEPER) PB6 | 9 10| PA15 (SD_DET) GND | 9 10| 5V
* ----- -----
* EXP1 EXP1
* Board Display
* ------ ------
* (SD_DET) PA15 | 1 2 | PB6 (BEEPER) (SPI1-MISO) MISO | 1 2 | SCK (SPI1-SCK)
* (MOD_RESET) PA9 | 3 4 | RESET MOD_RESET | 3 4 | SD_CS
* (SD_CS) PA10 5 6 | PB9 (FREE) LCD_CS | 5 6 MOSI (SPI1-MOSI)
* (LCD_CS) PB8 | 7 8 | PB7 (FREE) SD_DET | 7 8 | RESET
* GND | 9 10 | 5V GND | 9 10 | 5V
* ------ ------
* EXP1 EXP1
*
* Needs custom cable:
*
* Board Adapter Display
* _________
* EXP1-1 ----------- EXP1-10
* EXP1-2 ----------- EXP1-9
* SPI1-4 ----------- EXP1-6
* EXP1-4 ----------- EXP1-5
* SP11-3 ----------- EXP1-2
* EXP1-6 ----------- EXP1-4
* EXP1-7 ----------- EXP1-8
* EXP1-8 ----------- EXP1-3
* SPI1-1 ----------- EXP1-1
* EXP1-10 ----------- EXP1-7
* ----------------------------------
* EXP1-10 ---------- EXP1-10 5V
* EXP1-9 ----------- EXP1-9 GND
* SPI1-4 ----------- EXP1-6 MOSI
* EXP1-7 ----------- EXP1-5 LCD_CS
* SP11-3 ----------- EXP1-2 SCK
* EXP1-5 ----------- EXP1-4 SD_CS
* EXP1-4 ----------- EXP1-8 RESET
* EXP1-3 ----------- EXP1-3 MOD_RST
* SPI1-1 ----------- EXP1-1 MISO
* EXP1-1 ----------- EXP1-7 SD_DET
*/
#define CLCD_SPI_BUS 1 // SPI1 connector

14
Marlin/src/pins/stm32f1/pins_ZM3E2_V1_0.h
View File

@ -72,14 +72,14 @@
// 2 +5V
// 1 GND
#define EXP1_08_PIN PB11
#define EXP1_07_PIN PB10
#define EXP1_06_PIN PB2
#define EXP1_05_PIN PC5
#define EXP1_04_PIN PA10
#define EXP1_03_PIN PA9
#define EXP1_02_PIN PB0
#define EXP1_01_PIN PB1
#define EXP1_02_PIN PB0
#define EXP1_03_PIN PA9
#define EXP1_04_PIN PA10
#define EXP1_05_PIN PC5
#define EXP1_06_PIN PB2
#define EXP1_07_PIN PB10
#define EXP1_08_PIN PB11
// AUX1 connector
// 1 +5V

24
Marlin/src/pins/stm32f1/pins_ZM3E4_V1_0.h
View File

@ -89,14 +89,14 @@
// 2 +5V +5V
// 1 GND GND
#define EXP1_08_PIN PE14
#define EXP1_07_PIN PE15
#define EXP1_06_PIN PE9
#define EXP1_05_PIN PE8
#define EXP1_04_PIN PE10
#define EXP1_03_PIN PE12
#define EXP1_02_PIN PE11
#define EXP1_01_PIN PE13
#define EXP1_02_PIN PE11
#define EXP1_03_PIN PE12
#define EXP1_04_PIN PE10
#define EXP1_05_PIN PE8
#define EXP1_06_PIN PE9
#define EXP1_07_PIN PE15
#define EXP1_08_PIN PE14
// EXP2 connector
// MARK I/O ZONESTAR_LCD12864 REPRAPDISCOUNT_LCD12864
@ -111,12 +111,12 @@
// 2 +5V +5V
// 1 GND GND
#define EXP2_08_PIN PB3
#define EXP2_07_PIN PB5
#define EXP2_06_PIN PB4
#define EXP2_05_PIN PA15
#define EXP2_04_PIN PA10
#define EXP2_03_PIN PA9
#define EXP2_04_PIN PA10
#define EXP2_05_PIN PA15
#define EXP2_06_PIN PB4
#define EXP2_07_PIN PB5
#define EXP2_08_PIN PB3
// AUX1 connector
// 1 +5V

28
Marlin/src/pins/stm32f1/pins_ZM3E4_V2_0.h
View File

@ -90,14 +90,14 @@
// 2 +5V
// 1 GND
#define EXP1_08_PIN PE14
#define EXP1_07_PIN PE15
#define EXP1_06_PIN PE9
#define EXP1_05_PIN PE8
#define EXP1_04_PIN PE10
#define EXP1_03_PIN PE12
#define EXP1_02_PIN PE11
#define EXP1_01_PIN PE13
#define EXP1_02_PIN PE11
#define EXP1_03_PIN PE12
#define EXP1_04_PIN PE10
#define EXP1_05_PIN PE8
#define EXP1_06_PIN PE9
#define EXP1_07_PIN PE15
#define EXP1_08_PIN PE14
// EXP2 connector
// MARK I/O ZONESTAR_LCD12864 REPRAPDISCOUNT_LCD12864
@ -112,14 +112,14 @@
// 2 +5V
// 1 GND
#define EXP2_08_PIN PB3
#define EXP2_07_PIN PB5
#define EXP2_06_PIN PB4
#define EXP2_05_PIN PA15
#define EXP2_04_PIN PA10
#define EXP2_03_PIN PA9
#define EXP2_02_PIN PE7
#define EXP2_01_PIN PC0
#define EXP2_02_PIN PE7
#define EXP2_03_PIN PA9
#define EXP2_04_PIN PA10
#define EXP2_05_PIN PA15
#define EXP2_06_PIN PB4
#define EXP2_07_PIN PB5
#define EXP2_08_PIN PB3
// AUX1 connector
// 1 +5V