bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

🏗️ Extend AXIS_CHAR to include E

Browse Source 
Co-Authored-By: DerAndere <26200979+DerAndere1@users.noreply.github.com>
This commit is contained in:
Scott Lahteine 2022-04-03 20:52:27 -05:00 committed by Scott Lahteine
parent 0041de1a8a
commit d56731cd07
20 changed files with 57 additions and 57 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Marlin/src/core/utility.h
View File

@ -79,7 +79,7 @@ constexpr uint8_t ui8_to_percent(const uint8_t i) { return (int(i) * 100 + 127)
// Axis names for G-code parsing, reports, etc.
const xyze_char_t axis_codes LOGICAL_AXIS_ARRAY('E', 'X', 'Y', 'Z', AXIS4_NAME, AXIS5_NAME, AXIS6_NAME, AXIS7_NAME, AXIS8_NAME, AXIS9_NAME);
#if NUM_AXES <= XYZ
#if NUM_AXES <= XYZ && !HAS_EXTRUDERS
#define AXIS_CHAR(A) ((char)('X' + A))
#define IAXIS_CHAR AXIS_CHAR
#else

44
Marlin/src/feature/encoder_i2c.cpp
View File

@ -49,7 +49,7 @@ void I2CPositionEncoder::init(const uint8_t address, const AxisEnum axis) {
initialized = true;
SERIAL_ECHOLNPGM("Setting up encoder on ", AS_CHAR(axis_codes[encoderAxis]), " axis, addr = ", address);
SERIAL_ECHOLNPGM("Setting up encoder on ", AS_CHAR(AXIS_CHAR(encoderAxis)), " axis, addr = ", address);
position = get_position();
}
@ -67,7 +67,7 @@ void I2CPositionEncoder::update() {
/*
if (trusted) { //commented out as part of the note below
trusted = false;
SERIAL_ECHOLNPGM("Fault detected on ", AS_CHAR(axis_codes[encoderAxis]), " axis encoder. Disengaging error correction until module is trusted again.");
SERIAL_ECHOLNPGM("Fault detected on ", AS_CHAR(AXIS_CHAR(encoderAxis)), " axis encoder. Disengaging error correction until module is trusted again.");
}
*/
return;
@ -92,7 +92,7 @@ void I2CPositionEncoder::update() {
if (millis() - lastErrorTime > I2CPE_TIME_TRUSTED) {
trusted = true;
SERIAL_ECHOLNPGM("Untrusted encoder module on ", AS_CHAR(axis_codes[encoderAxis]), " axis has been fault-free for set duration, reinstating error correction.");
SERIAL_ECHOLNPGM("Untrusted encoder module on ", AS_CHAR(AXIS_CHAR(encoderAxis)), " axis has been fault-free for set duration, reinstating error correction.");
//the encoder likely lost its place when the error occurred, so we'll reset and use the printer's
//idea of where it the axis is to re-initialize
@ -172,7 +172,7 @@ void I2CPositionEncoder::update() {
float sumP = 0;
LOOP_L_N(i, I2CPE_ERR_PRST_ARRAY_SIZE) sumP += errPrst[i];
const int32_t errorP = int32_t(sumP * RECIPROCAL(I2CPE_ERR_PRST_ARRAY_SIZE));
SERIAL_CHAR(axis_codes[encoderAxis]);
SERIAL_CHAR(AXIS_CHAR(encoderAxis));
SERIAL_ECHOLNPGM(" : CORRECT ERR ", errorP * planner.mm_per_step[encoderAxis], "mm");
babystep.add_steps(encoderAxis, -LROUND(errorP));
errPrstIdx = 0;
@ -192,7 +192,7 @@ void I2CPositionEncoder::update() {
if (ABS(error) > I2CPE_ERR_CNT_THRESH * planner.settings.axis_steps_per_mm[encoderAxis]) {
const millis_t ms = millis();
if (ELAPSED(ms, nextErrorCountTime)) {
SERIAL_CHAR(axis_codes[encoderAxis]);
SERIAL_CHAR(AXIS_CHAR(encoderAxis));
SERIAL_ECHOLNPGM(" : LARGE ERR ", error, "; diffSum=", diffSum);
errorCount++;
nextErrorCountTime = ms + I2CPE_ERR_CNT_DEBOUNCE_MS;
@ -212,7 +212,7 @@ void I2CPositionEncoder::set_homed() {
homed = trusted = true;
#ifdef I2CPE_DEBUG
SERIAL_CHAR(axis_codes[encoderAxis]);
SERIAL_CHAR(AXIS_CHAR(encoderAxis));
SERIAL_ECHOLNPGM(" axis encoder homed, offset of ", zeroOffset, " ticks.");
#endif
}
@ -223,7 +223,7 @@ void I2CPositionEncoder::set_unhomed() {
homed = trusted = false;
#ifdef I2CPE_DEBUG
SERIAL_CHAR(axis_codes[encoderAxis]);
SERIAL_CHAR(AXIS_CHAR(encoderAxis));
SERIAL_ECHOLNPGM(" axis encoder unhomed.");
#endif
}
@ -231,7 +231,7 @@ void I2CPositionEncoder::set_unhomed() {
bool I2CPositionEncoder::passes_test(const bool report) {
if (report) {
if (H != I2CPE_MAG_SIG_GOOD) SERIAL_ECHOPGM("Warning. ");
SERIAL_CHAR(axis_codes[encoderAxis]);
SERIAL_CHAR(AXIS_CHAR(encoderAxis));
serial_ternary(H == I2CPE_MAG_SIG_BAD, F(" axis "), F("magnetic strip "), F("encoder "));
switch (H) {
case I2CPE_MAG_SIG_GOOD:
@ -252,7 +252,7 @@ float I2CPositionEncoder::get_axis_error_mm(const bool report) {
error = ABS(diff) > 10000 ? 0 : diff; // Huge error is a bad reading
if (report) {
SERIAL_CHAR(axis_codes[encoderAxis]);
SERIAL_CHAR(AXIS_CHAR(encoderAxis));
SERIAL_ECHOLNPGM(" axis target=", target, "mm; actual=", actual, "mm; err=", error, "mm");
}
@ -262,7 +262,7 @@ float I2CPositionEncoder::get_axis_error_mm(const bool report) {
int32_t I2CPositionEncoder::get_axis_error_steps(const bool report) {
if (!active) {
if (report) {
SERIAL_CHAR(axis_codes[encoderAxis]);
SERIAL_CHAR(AXIS_CHAR(encoderAxis));
SERIAL_ECHOLNPGM(" axis encoder not active!");
}
return 0;
@ -287,7 +287,7 @@ int32_t I2CPositionEncoder::get_axis_error_steps(const bool report) {
errorPrev = error;
if (report) {
SERIAL_CHAR(axis_codes[encoderAxis]);
SERIAL_CHAR(AXIS_CHAR(encoderAxis));
SERIAL_ECHOLNPGM(" axis target=", target, "; actual=", encoderCountInStepperTicksScaled, "; err=", error);
}
@ -657,7 +657,7 @@ void I2CPositionEncodersMgr::report_position(const int8_t idx, const bool units,
else {
if (noOffset) {
const int32_t raw_count = encoders[idx].get_raw_count();
SERIAL_CHAR(axis_codes[encoders[idx].get_axis()], ' ');
SERIAL_CHAR(AXIS_CHAR(encoders[idx).get_axis()], ' ');
for (uint8_t j = 31; j > 0; j--)
SERIAL_ECHO((bool)(0x00000001 & (raw_count >> j)));
@ -712,7 +712,7 @@ void I2CPositionEncodersMgr::change_module_address(const uint8_t oldaddr, const
// and enable it (it will likely have failed initialization on power-up, before the address change).
const int8_t idx = idx_from_addr(newaddr);
if (idx >= 0 && !encoders[idx].get_active()) {
SERIAL_CHAR(axis_codes[encoders[idx].get_axis()]);
SERIAL_CHAR(AXIS_CHAR(encoders[idx).get_axis()]);
SERIAL_ECHOLNPGM(" axis encoder was not detected on printer startup. Trying again.");
encoders[idx].set_active(encoders[idx].passes_test(true));
}
@ -814,7 +814,7 @@ void I2CPositionEncodersMgr::M860() {
if (I2CPE_idx == 0xFF) {
LOOP_LOGICAL_AXES(i) {
if (!I2CPE_anyaxis || parser.seen_test(axis_codes[i])) {
if (!I2CPE_anyaxis || parser.seen_test(AXIS_CHAR(i))) {
const uint8_t idx = idx_from_axis(AxisEnum(i));
if ((int8_t)idx >= 0) report_position(idx, hasU, hasO);
}
@ -841,7 +841,7 @@ void I2CPositionEncodersMgr::M861() {
if (I2CPE_idx == 0xFF) {
LOOP_LOGICAL_AXES(i) {
if (!I2CPE_anyaxis || parser.seen(axis_codes[i])) {
if (!I2CPE_anyaxis || parser.seen(AXIS_CHAR(i))) {
const uint8_t idx = idx_from_axis(AxisEnum(i));
if ((int8_t)idx >= 0) report_status(idx);
}
@ -869,7 +869,7 @@ void I2CPositionEncodersMgr::M862() {
if (I2CPE_idx == 0xFF) {
LOOP_LOGICAL_AXES(i) {
if (!I2CPE_anyaxis || parser.seen(axis_codes[i])) {
if (!I2CPE_anyaxis || parser.seen(AXIS_CHAR(i))) {
const uint8_t idx = idx_from_axis(AxisEnum(i));
if ((int8_t)idx >= 0) test_axis(idx);
}
@ -900,7 +900,7 @@ void I2CPositionEncodersMgr::M863() {
if (I2CPE_idx == 0xFF) {
LOOP_LOGICAL_AXES(i) {
if (!I2CPE_anyaxis || parser.seen(axis_codes[i])) {
if (!I2CPE_anyaxis || parser.seen(AXIS_CHAR(i))) {
const uint8_t idx = idx_from_axis(AxisEnum(i));
if ((int8_t)idx >= 0) calibrate_steps_mm(idx, iterations);
}
@ -976,7 +976,7 @@ void I2CPositionEncodersMgr::M865() {
if (!I2CPE_addr) {
LOOP_LOGICAL_AXES(i) {
if (!I2CPE_anyaxis || parser.seen(axis_codes[i])) {
if (!I2CPE_anyaxis || parser.seen(AXIS_CHAR(i))) {
const uint8_t idx = idx_from_axis(AxisEnum(i));
if ((int8_t)idx >= 0) report_module_firmware(encoders[idx].get_address());
}
@ -1007,7 +1007,7 @@ void I2CPositionEncodersMgr::M866() {
if (I2CPE_idx == 0xFF) {
LOOP_LOGICAL_AXES(i) {
if (!I2CPE_anyaxis || parser.seen(axis_codes[i])) {
if (!I2CPE_anyaxis || parser.seen(AXIS_CHAR(i))) {
const uint8_t idx = idx_from_axis(AxisEnum(i));
if ((int8_t)idx >= 0) {
if (hasR)
@ -1045,7 +1045,7 @@ void I2CPositionEncodersMgr::M867() {
if (I2CPE_idx == 0xFF) {
LOOP_LOGICAL_AXES(i) {
if (!I2CPE_anyaxis || parser.seen(axis_codes[i])) {
if (!I2CPE_anyaxis || parser.seen(AXIS_CHAR(i))) {
const uint8_t idx = idx_from_axis(AxisEnum(i));
if ((int8_t)idx >= 0) {
const bool ena = onoff == -1 ? !encoders[I2CPE_idx].get_ec_enabled() : !!onoff;
@ -1081,7 +1081,7 @@ void I2CPositionEncodersMgr::M868() {
if (I2CPE_idx == 0xFF) {
LOOP_LOGICAL_AXES(i) {
if (!I2CPE_anyaxis || parser.seen(axis_codes[i])) {
if (!I2CPE_anyaxis || parser.seen(AXIS_CHAR(i))) {
const uint8_t idx = idx_from_axis(AxisEnum(i));
if ((int8_t)idx >= 0) {
if (newThreshold != -9999)
@ -1115,7 +1115,7 @@ void I2CPositionEncodersMgr::M869() {
if (I2CPE_idx == 0xFF) {
LOOP_LOGICAL_AXES(i) {
if (!I2CPE_anyaxis || parser.seen(axis_codes[i])) {
if (!I2CPE_anyaxis || parser.seen(AXIS_CHAR(i))) {
const uint8_t idx = idx_from_axis(AxisEnum(i));
if ((int8_t)idx >= 0) report_error(idx);
}

10
Marlin/src/feature/encoder_i2c.h
View File

@ -261,32 +261,32 @@ class I2CPositionEncodersMgr {
static void report_error_count(const int8_t idx, const AxisEnum axis) {
CHECK_IDX();
SERIAL_ECHOLNPGM("Error count on ", AS_CHAR(axis_codes[axis]), " axis is ", encoders[idx].get_error_count());
SERIAL_ECHOLNPGM("Error count on ", AS_CHAR(AXIS_CHAR(axis)), " axis is ", encoders[idx].get_error_count());
}
static void reset_error_count(const int8_t idx, const AxisEnum axis) {
CHECK_IDX();
encoders[idx].set_error_count(0);
SERIAL_ECHOLNPGM("Error count on ", AS_CHAR(axis_codes[axis]), " axis has been reset.");
SERIAL_ECHOLNPGM("Error count on ", AS_CHAR(AXIS_CHAR(axis)), " axis has been reset.");
}
static void enable_ec(const int8_t idx, const bool enabled, const AxisEnum axis) {
CHECK_IDX();
encoders[idx].set_ec_enabled(enabled);
SERIAL_ECHOPGM("Error correction on ", AS_CHAR(axis_codes[axis]));
SERIAL_ECHOPGM("Error correction on ", AS_CHAR(AXIS_CHAR(axis)));
SERIAL_ECHO_TERNARY(encoders[idx].get_ec_enabled(), " axis is ", "en", "dis", "abled.\n");
}
static void set_ec_threshold(const int8_t idx, const float newThreshold, const AxisEnum axis) {
CHECK_IDX();
encoders[idx].set_ec_threshold(newThreshold);
SERIAL_ECHOLNPGM("Error correct threshold for ", AS_CHAR(axis_codes[axis]), " axis set to ", newThreshold, "mm.");
SERIAL_ECHOLNPGM("Error correct threshold for ", AS_CHAR(AXIS_CHAR(axis)), " axis set to ", newThreshold, "mm.");
}
static void get_ec_threshold(const int8_t idx, const AxisEnum axis) {
CHECK_IDX();
const float threshold = encoders[idx].get_ec_threshold();
SERIAL_ECHOLNPGM("Error correct threshold for ", AS_CHAR(axis_codes[axis]), " axis is ", threshold, "mm.");
SERIAL_ECHOLNPGM("Error correct threshold for ", AS_CHAR(AXIS_CHAR(axis)), " axis is ", threshold, "mm.");
}
static int8_t idx_from_axis(const AxisEnum axis) {

4
Marlin/src/gcode/config/M200-M205.cpp
View File

@ -134,7 +134,7 @@ void GcodeSuite::M201() {
#endif
LOOP_LOGICAL_AXES(i) {
if (parser.seenval(axis_codes[i])) {
if (parser.seenval(AXIS_CHAR(i))) {
const uint8_t a = TERN(HAS_EXTRUDERS, (i == E_AXIS ? uint8_t(E_AXIS_N(target_extruder)) : i), i);
planner.set_max_acceleration(a, parser.value_axis_units((AxisEnum)a));
}
@ -183,7 +183,7 @@ void GcodeSuite::M203() {
if (target_extruder < 0) return;
LOOP_LOGICAL_AXES(i)
if (parser.seenval(axis_codes[i])) {
if (parser.seenval(AXIS_CHAR(i))) {
const uint8_t a = TERN(HAS_EXTRUDERS, (i == E_AXIS ? uint8_t(E_AXIS_N(target_extruder)) : i), i);
planner.set_max_feedrate(a, parser.value_axis_units((AxisEnum)a));
}

2
Marlin/src/gcode/config/M92.cpp
View File

@ -47,7 +47,7 @@ void GcodeSuite::M92() {
return M92_report(true, target_extruder);
LOOP_LOGICAL_AXES(i) {
if (parser.seenval(axis_codes[i])) {
if (parser.seenval(AXIS_CHAR(i))) {
if (TERN1(HAS_EXTRUDERS, i != E_AXIS))
planner.settings.axis_steps_per_mm[i] = parser.value_per_axis_units((AxisEnum)i);
else {

6
Marlin/src/gcode/control/M17_M18_M84.cpp
View File

@ -75,7 +75,7 @@ void do_enable(const stepper_flags_t to_enable) {
LOOP_NUM_AXES(a) {
if (TEST(shall_enable, a)) {
stepper.enable_axis(AxisEnum(a)); // Mark and enable the requested axis
DEBUG_ECHOLNPGM("Enabled ", axis_codes[a], " (", a, ") with overlap ", hex_word(enable_overlap[a]), " ... Enabled: ", hex_word(stepper.axis_enabled.bits));
DEBUG_ECHOLNPGM("Enabled ", AXIS_CHAR(a), " (", a, ") with overlap ", hex_word(enable_overlap[a]), " ... Enabled: ", hex_word(stepper.axis_enabled.bits));
also_enabled |= enable_overlap[a];
}
}
@ -157,7 +157,7 @@ void try_to_disable(const stepper_flags_t to_disable) {
// Attempt to disable all flagged axes
LOOP_NUM_AXES(a)
if (TEST(to_disable.bits, a)) {
DEBUG_ECHOPGM("Try to disable ", axis_codes[a], " (", a, ") with overlap ", hex_word(enable_overlap[a]), " ... ");
DEBUG_ECHOPGM("Try to disable ", AXIS_CHAR(a), " (", a, ") with overlap ", hex_word(enable_overlap[a]), " ... ");
if (stepper.disable_axis(AxisEnum(a))) { // Mark the requested axis and request to disable
DEBUG_ECHOPGM("OK");
still_enabled &= ~(_BV(a) | enable_overlap[a]); // If actually disabled, clear one or more tracked bits
@ -195,7 +195,7 @@ void try_to_disable(const stepper_flags_t to_disable) {
// If any of the requested axes are still enabled, give a warning
LOOP_NUM_AXES(a) {
if (TEST(still_enabled, a)) {
SERIAL_CHAR(axis_codes[a]);
SERIAL_CHAR(AXIS_CHAR(a));
overlap_warning(stepper.axis_enabled.bits & enable_overlap[a]);
}
}

8
Marlin/src/gcode/control/M350_M351.cpp
View File

@ -40,21 +40,21 @@ void GcodeSuite::M350() {
}
/**
* M351: Toggle MS1 MS2 pins directly with axis codes X Y Z E B
* M351: Toggle MS1 MS2 pins directly with axis codes X Y Z . . . E [B]
* S# determines MS1, MS2 or MS3, X# sets the pin high/low.
*/
void GcodeSuite::M351() {
if (parser.seenval('S')) switch (parser.value_byte()) {
case 1:
LOOP_LOGICAL_AXES(i) if (parser.seenval(axis_codes[i])) stepper.microstep_ms(i, parser.value_byte(), -1, -1);
LOOP_LOGICAL_AXES(i) if (parser.seenval(AXIS_CHAR(i))) stepper.microstep_ms(i, parser.value_byte(), -1, -1);
if (parser.seenval('B')) stepper.microstep_ms(4, parser.value_byte(), -1, -1);
break;
case 2:
LOOP_LOGICAL_AXES(i) if (parser.seenval(axis_codes[i])) stepper.microstep_ms(i, -1, parser.value_byte(), -1);
LOOP_LOGICAL_AXES(i) if (parser.seenval(AXIS_CHAR(i))) stepper.microstep_ms(i, -1, parser.value_byte(), -1);
if (parser.seenval('B')) stepper.microstep_ms(4, -1, parser.value_byte(), -1);
break;
case 3:
LOOP_LOGICAL_AXES(i) if (parser.seenval(axis_codes[i])) stepper.microstep_ms(i, -1, -1, parser.value_byte());
LOOP_LOGICAL_AXES(i) if (parser.seenval(AXIS_CHAR(i))) stepper.microstep_ms(i, -1, -1, parser.value_byte());
if (parser.seenval('B')) stepper.microstep_ms(4, -1, -1, parser.value_byte());
break;
}

4
Marlin/src/gcode/feature/L6470/M906.cpp
View File

@ -211,7 +211,7 @@ void L64XX_report_current(L64XX &motor, const L64XX_axis_t axis) {
* 1 - monitor only X2, Y2, Z2
* 2 - monitor only Z3
* 3 - monitor only Z4
* Xxxx, Yxxx, Zxxx, Exxx - axis to change (optional)
* Xxxx, Yxxx, Zxxx, Axxx, Bxxx, Cxxx, Uxxx, Vxxx, Wxxx, Exxx - axis to change (optional)
* L6474 - current in mA (4A max)
* All others - 0-255
*
@ -236,7 +236,7 @@ void GcodeSuite::M906() {
constexpr int8_t index = -1;
#endif
LOOP_LOGICAL_AXES(i) if (uint16_t value = parser.intval(axis_codes[i])) {
LOOP_LOGICAL_AXES(i) if (uint16_t value = parser.intval(AXIS_CHAR(i))) {
report_current = false;

2
Marlin/src/gcode/feature/trinamic/M122.cpp
View File

@ -35,7 +35,7 @@ void GcodeSuite::M122() {
xyze_bool_t print_axis = ARRAY_N_1(LOGICAL_AXES, false);
bool print_all = true;
LOOP_LOGICAL_AXES(i) if (parser.seen_test(axis_codes[i])) { print_axis[i] = true; print_all = false; }
LOOP_LOGICAL_AXES(i) if (parser.seen_test(AXIS_CHAR(i))) { print_axis[i] = true; print_all = false; }
if (print_all) LOOP_LOGICAL_AXES(i) print_axis[i] = true;

2
Marlin/src/gcode/feature/trinamic/M569.cpp
View File

@ -53,7 +53,7 @@ static void set_stealth_status(const bool enable, const int8_t eindex) {
constexpr int8_t index = -1;
#endif
LOOP_LOGICAL_AXES(i) if (parser.seen(axis_codes[i])) {
LOOP_LOGICAL_AXES(i) if (parser.seen(AXIS_CHAR(i))) {
switch (i) {
case X_AXIS:
TERN_(X_HAS_STEALTHCHOP, if (index < 0 || index == 0) TMC_SET_STEALTH(X));

2
Marlin/src/gcode/feature/trinamic/M906.cpp
View File

@ -66,7 +66,7 @@ void GcodeSuite::M906() {
constexpr int8_t index = -1;
#endif
LOOP_LOGICAL_AXES(i) if (uint16_t value = parser.intval(axis_codes[i])) {
LOOP_LOGICAL_AXES(i) if (uint16_t value = parser.intval(AXIS_CHAR(i))) {
report = false;
switch (i) {
#if AXIS_IS_TMC(X) || AXIS_IS_TMC(X2)

2
Marlin/src/gcode/feature/trinamic/M911-M914.cpp
View File

@ -288,7 +288,7 @@
#elif AXIS_IS_TMC(X) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Z)
constexpr uint8_t index = 0;
#endif
LOOP_LOGICAL_AXES(i) if (int32_t value = parser.longval(axis_codes[i])) {
LOOP_LOGICAL_AXES(i) if (int32_t value = parser.longval(AXIS_CHAR(i))) {
report = false;
switch (i) {
#if X_HAS_STEALTHCHOP || X2_HAS_STEALTHCHOP

4
Marlin/src/gcode/feature/trinamic/M919.cpp
View File

@ -112,13 +112,13 @@ void GcodeSuite::M919() {
int8_t eindex = -1;
#endif
bool report = true;
LOOP_LOGICAL_AXES(i) if (parser.seen_test(axis_codes[i])) {
LOOP_LOGICAL_AXES(i) if (parser.seen_test(AXIS_CHAR(i))) {
report = false;
// Get the chopper timing for the specified axis and index
switch (i) {
default: // A specified axis isn't Trinamic
SERIAL_ECHOLNPGM("?Axis ", AS_CHAR(axis_codes[i]), " has no TMC drivers.");
SERIAL_ECHOLNPGM("?Axis ", AS_CHAR(AXIS_CHAR(i)), " has no TMC drivers.");
break;
#if AXIS_IS_TMC(X) || AXIS_IS_TMC(X2)

4
Marlin/src/gcode/geometry/G92.cpp
View File

@ -74,7 +74,7 @@ void GcodeSuite::G92() {
#if ENABLED(POWER_LOSS_RECOVERY)
case 9: // G92.9 - Set Current Position directly (like Marlin 1.0)
LOOP_LOGICAL_AXES(i) {
if (parser.seenval(axis_codes[i])) {
if (parser.seenval(AXIS_CHAR(i))) {
if (TERN1(HAS_EXTRUDERS, i != E_AXIS))
sync_XYZE = true;
else {
@ -88,7 +88,7 @@ void GcodeSuite::G92() {
case 0:
LOOP_LOGICAL_AXES(i) {
if (parser.seenval(axis_codes[i])) {
if (parser.seenval(AXIS_CHAR(i))) {
const float l = parser.value_axis_units((AxisEnum)i), // Given axis coordinate value, converted to millimeters
v = TERN0(HAS_EXTRUDERS, i == E_AXIS) ? l : LOGICAL_TO_NATIVE(l, i), // Axis position in NATIVE space (applying the existing offset)
d = v - current_position[i]; // How much is the current axis position altered by?

2
Marlin/src/lcd/dogm/status_screen_DOGM.cpp
View File

@ -432,7 +432,7 @@ FORCE_INLINE void _draw_axis_value(const AxisEnum axis, const char *value, const
const bool is_inch = parser.using_inch_units();
const AxisEnum a = TERN(LCD_SHOW_E_TOTAL, axis == E_AXIS ? X_AXIS : axis, axis);
const uint8_t offs = a * (is_inch ? XYZ_SPACING_IN : XYZ_SPACING);
lcd_put_wchar((is_inch ? X_LABEL_POS_IN : X_LABEL_POS) + offs, XYZ_BASELINE, axis_codes[axis]);
lcd_put_wchar((is_inch ? X_LABEL_POS_IN : X_LABEL_POS) + offs, XYZ_BASELINE, AXIS_CHAR(axis));
lcd_moveto((is_inch ? X_VALUE_POS_IN : X_VALUE_POS) + offs, XYZ_BASELINE);
if (blink)

2
Marlin/src/lcd/e3v2/marlinui/dwin_string.cpp
View File

@ -72,7 +72,7 @@ void DWIN_String::add(const char *tpl, const int8_t index, const char *cstr/*=nu
else if (ch == '$' && cstr)
add(cstr);
else if (ch == '@')
add_character(axis_codes[index]);
add_character(AXIS_CHAR(index));
else
add_character(ch);
}

2
Marlin/src/lcd/lcdprint.cpp
View File

@ -78,7 +78,7 @@ lcd_uint_t lcd_put_u8str_P(PGM_P const ptpl, const int8_t ind, const char *cstr/
n -= lcd_put_u8str_max(cstr, n * (MENU_FONT_WIDTH)) / (MENU_FONT_WIDTH);
}
else if (ch == '@') {
lcd_put_wchar(axis_codes[ind]);
lcd_put_wchar(AXIS_CHAR(ind));
n--;
}
else {

4
Marlin/src/lcd/marlinui.cpp
View File

@ -840,7 +840,7 @@ void MarlinUI::init() {
TERN_(MULTI_E_MANUAL, axis == E_AXIS ? e_index :) active_extruder
);
//SERIAL_ECHOLNPGM("Add planner.move with Axis ", AS_CHAR(axis_codes[axis]), " at FR ", fr_mm_s);
//SERIAL_ECHOLNPGM("Add planner.move with Axis ", AS_CHAR(AXIS_CHAR(axis)), " at FR ", fr_mm_s);
axis = NO_AXIS_ENUM;
@ -857,7 +857,7 @@ void MarlinUI::init() {
TERN_(MULTI_E_MANUAL, if (move_axis == E_AXIS) e_index = eindex);
start_time = millis() + (menu_scale < 0.99f ? 0UL : 250UL); // delay for bigger moves
axis = move_axis;
//SERIAL_ECHOLNPGM("Post Move with Axis ", AS_CHAR(axis_codes[axis]), " soon.");
//SERIAL_ECHOLNPGM("Post Move with Axis ", AS_CHAR(AXIS_CHAR(axis)), " soon.");
}
#if ENABLED(AUTO_BED_LEVELING_UBL)

2
Marlin/src/lcd/tft/tft_string.cpp
View File

@ -116,7 +116,7 @@ void TFT_String::add(const char *tpl, const int8_t index, const char *cstr/*=nul
else if (ch == '$' && cstr)
add(cstr);
else if (ch == '@')
add_character(axis_codes[index]);
add_character(AXIS_CHAR(index));
else
add_character(ch);
}

6
Marlin/src/libs/L64XX/L64XX_Marlin.cpp
View File

@ -412,11 +412,11 @@ uint8_t L64XX_Marlin::get_user_input(uint8_t &driver_count, L64XX_axis_t axis_in
}
uint8_t found_displacement = false;
LOOP_LOGICAL_AXES(i) if (uint16_t _displacement = parser.intval(axis_codes[i])) {
LOOP_LOGICAL_AXES(i) if (uint16_t _displacement = parser.intval(AXIS_CHAR(i))) {
found_displacement = true;
displacement = _displacement;
const uint8_t axis_offset = parser.byteval('J');
axis_mon[0][0] = axis_codes[i]; // Axis first character, one of XYZ...E
axis_mon[0][0] = AXIS_CHAR(i); // Axis first character, one of XYZ...E
const bool single_or_e = axis_offset >= 2 || axis_mon[0][0] == 'E',
one_or_more = !single_or_e && axis_offset == 0;
uint8_t driver_count_local = 0; // Can't use "driver_count" directly as a subscript because it's passed by reference
@ -667,7 +667,7 @@ uint8_t L64XX_Marlin::get_user_input(uint8_t &driver_count, L64XX_axis_t axis_in
static constexpr float default_max_feedrate[] = DEFAULT_MAX_FEEDRATE;
const uint8_t num_feedrates = COUNT(default_max_feedrate);
for (j = 0; j < num_feedrates; j++) {
if (axis_codes[j] == axis_mon[0][0]) {
if (AXIS_CHAR(j) == axis_mon[0][0]) {
final_feedrate = default_max_feedrate[j];
break;
}