diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 6a2c43ba3c..bf7f38d2dd 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -123,6 +123,11 @@
 // 51 is 100k thermistor - EPCOS (1k pullup)
 // 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
 // 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
+//
+// 1047 is Pt1000 with 4k7 pullup
+// 1010 is Pt1000 with 1k pullup (non standard)
+// 147 is Pt100 with 4k7 pullup
+// 110 is Pt100 with 1k pullup (non standard)
 
 #define TEMP_SENSOR_0 -1
 #define TEMP_SENSOR_1 -1
diff --git a/Marlin/Marlin.h b/Marlin/Marlin.h
index a28393e7b8..7a4b864fde 100644
--- a/Marlin/Marlin.h
+++ b/Marlin/Marlin.h
@@ -189,6 +189,8 @@ void enquecommand_P(const char *cmd); //put an ascii command at the end of the c
 void prepare_arc_move(char isclockwise);
 void clamp_to_software_endstops(float target[3]);
 
+void refresh_cmd_timeout(void);
+
 #ifdef FAST_PWM_FAN
 void setPwmFrequency(uint8_t pin, int val);
 #endif
diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp
index 2b8138f093..498adfdb95 100644
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@@ -1080,6 +1080,10 @@ static void homeaxis(int axis) {
   }
 }
 #define HOMEAXIS(LETTER) homeaxis(LETTER##_AXIS)
++void refresh_cmd_timeout(void)
+{
+  previous_millis_cmd = millis();
+}
 
 void process_commands()
 {
diff --git a/Marlin/thermistortables.h b/Marlin/thermistortables.h
index 58a2466fee..1d2b3ca65f 100644
--- a/Marlin/thermistortables.h
+++ b/Marlin/thermistortables.h
@@ -857,6 +857,70 @@ const short temptable_60[][2] PROGMEM = {
 };
 #endif
 
+// Pt1000 and Pt100 handling
+// 
+// Rt=R0*(1+a*T+b*T*T) [for T>0]
+// a=3.9083E-3, b=-5.775E-7
+
+#define PtA 3.9083E-3
+#define PtB -5.775E-7
+#define PtRt(T,R0) ((R0)*(1.0+(PtA)*(T)+(PtB)*(T)*(T)))
+#define PtAdVal(T,R0,Rup) (short)(1024/(Rup/PtRt(T,R0)+1))
+#define PtLine(T,R0,Rup) { PtAdVal(T,R0,Rup)*OVERSAMPLENR, T },
+
+#if (THERMISTORHEATER_0 == 110) || (THERMISTORHEATER_1 == 110) || (THERMISTORHEATER_2 == 110) || (THERMISTORBED == 110) // Pt100 with 1k0 pullup
+const short temptable_110[][2] PROGMEM = {
+// only few values are needed as the curve is very flat  
+  PtLine(0,100,1000)
+  PtLine(50,100,1000)
+  PtLine(100,100,1000)
+  PtLine(150,100,1000)
+  PtLine(200,100,1000)
+  PtLine(250,100,1000)
+  PtLine(300,100,1000)
+};
+#endif
+#if (THERMISTORHEATER_0 == 147) || (THERMISTORHEATER_1 == 147) || (THERMISTORHEATER_2 == 147) || (THERMISTORBED == 147) // Pt100 with 4k7 pullup
+const short temptable_147[][2] PROGMEM = {
+// only few values are needed as the curve is very flat  
+  PtLine(0,100,4700)
+  PtLine(50,100,4700)
+  PtLine(100,100,4700)
+  PtLine(150,100,4700)
+  PtLine(200,100,4700)
+  PtLine(250,100,4700)
+  PtLine(300,100,4700)
+};
+#endif
+#if (THERMISTORHEATER_0 == 1010) || (THERMISTORHEATER_1 == 1010) || (THERMISTORHEATER_2 == 1010) || (THERMISTORBED == 1010) // Pt1000 with 1k0 pullup
+const short temptable_1010[][2] PROGMEM = {
+  PtLine(0,1000,1000)
+  PtLine(25,1000,1000)
+  PtLine(50,1000,1000)
+  PtLine(75,1000,1000)
+  PtLine(100,1000,1000)
+  PtLine(125,1000,1000)
+  PtLine(150,1000,1000)
+  PtLine(175,1000,1000)
+  PtLine(200,1000,1000)
+  PtLine(225,1000,1000)
+  PtLine(250,1000,1000)
+  PtLine(275,1000,1000)
+  PtLine(300,1000,1000)
+};
+#endif
+#if (THERMISTORHEATER_0 == 1047) || (THERMISTORHEATER_1 == 1047) || (THERMISTORHEATER_2 == 1047) || (THERMISTORBED == 1047) // Pt1000 with 4k7 pullup
+const short temptable_1047[][2] PROGMEM = {
+// only few values are needed as the curve is very flat  
+  PtLine(0,1000,4700)
+  PtLine(50,1000,4700)
+  PtLine(100,1000,4700)
+  PtLine(150,1000,4700)
+  PtLine(200,1000,4700)
+  PtLine(250,1000,4700)
+  PtLine(300,1000,4700)
+};
+#endif
 
 #define _TT_NAME(_N) temptable_ ## _N
 #define TT_NAME(_N) _TT_NAME(_N)
diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index d3f4e32ca2..8961b67e1c 100644
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -460,6 +460,7 @@ static void lcd_move_x()
 {
     if (encoderPosition != 0)
     {
+        refresh_cmd_timeout();
         current_position[X_AXIS] += float((int)encoderPosition) * move_menu_scale;
         if (min_software_endstops && current_position[X_AXIS] < X_MIN_POS)
             current_position[X_AXIS] = X_MIN_POS;
@@ -489,6 +490,7 @@ static void lcd_move_y()
 {
     if (encoderPosition != 0)
     {
+        refresh_cmd_timeout();
         current_position[Y_AXIS] += float((int)encoderPosition) * move_menu_scale;
         if (min_software_endstops && current_position[Y_AXIS] < Y_MIN_POS)
             current_position[Y_AXIS] = Y_MIN_POS;
@@ -518,6 +520,7 @@ static void lcd_move_z()
 {
     if (encoderPosition != 0)
     {
+        refresh_cmd_timeout();
         current_position[Z_AXIS] += float((int)encoderPosition) * move_menu_scale;
         if (min_software_endstops && current_position[Z_AXIS] < Z_MIN_POS)
             current_position[Z_AXIS] = Z_MIN_POS;