bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

FYSETC Mini 12864 for HAL_STM32 (#14639)

Browse Source
This commit is contained in:
Karl Andersson
2019-07-18 12:42:16 +02:00
committed by Scott Lahteine
parent ec13aa0dc1
commit d472934a70
2 changed files with 60 additions and 22 deletions
Download Patch File Download Diff File Expand all files Collapse all files

7
Marlin/src/lcd/dogm/HAL_LCD_com_defines.h
View File

@@ -40,6 +40,13 @@
#define U8G_COM_HAL_HW_SPI_FN u8g_com_arduino_hw_spi_fn
uint8_t u8g_com_arduino_st7920_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
#define U8G_COM_ST7920_HAL_SW_SPI u8g_com_arduino_st7920_spi_fn
#elif defined(ARDUINO_ARCH_STM32)
uint8_t u8g_com_arduino_std_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
#define U8G_COM_HAL_SW_SPI_FN u8g_com_arduino_std_sw_spi_fn
uint8_t u8g_com_stm32duino_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
#define U8G_COM_HAL_HW_SPI_FN u8g_com_stm32duino_hw_spi_fn
uint8_t u8g_com_arduino_st7920_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
#define U8G_COM_ST7920_HAL_SW_SPI u8g_com_arduino_st7920_spi_fn
#else
uint8_t u8g_com_HAL_AVR_sw_sp_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
#define U8G_COM_HAL_SW_SPI_FN u8g_com_HAL_AVR_sw_sp_fn // AVR ?

75
Marlin/src/pins/stm32/pins_ARMED.h
View File

@@ -43,19 +43,23 @@
//
// Limit Switches
//
#define X_MIN_PIN PE0
#define X_MAX_PIN -1
#define Y_MIN_PIN PE1
#define Y_MAX_PIN -1
#define Z_MIN_PIN PE14
#define Z_MAX_PIN -1
#define X_STOP_PIN PE0
#define Y_STOP_PIN PE1
#define Z_STOP_PIN PE14
//
// Z Probe (when not Z_MIN_PIN)
//
// #ifndef Z_MIN_PROBE_PIN
// #define Z_MIN_PROBE_PIN PA4
// #endif
//#ifndef Z_MIN_PROBE_PIN
// #define Z_MIN_PROBE_PIN PA4
//#endif
//
// Filament Runout Sensor
//
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN PA3
#endif
//
// Steppers
@@ -85,13 +89,12 @@
#define E0_STEP_PIN PB5
#define E0_DIR_PIN PB6
#define E0_CS_PIN PB4
#ifdef ARMED_V1_1
#define E0_ENABLE_PIN PC12
#else
#define E0_ENABLE_PIN PB3
#endif
#define E0_CS_PIN PB4
#ifdef ARMED_SWAP_X_E1
#define E1_STEP_PIN PD3
@@ -137,21 +140,49 @@
//
#define SD_DETECT_PIN PA15
#define BEEPER_PIN PC9
#define LCD_PINS_RS PE9
#define LCD_PINS_ENABLE PE8
#define LCD_PINS_D4 PB12
#define LCD_PINS_D5 PB13
#define LCD_PINS_D6 PB14
#define LCD_PINS_D7 PB15
#if ENABLED(FYSETC_MINI_12864)
//
// See https://wiki.fysetc.com/Mini12864_Panel/?fbclid=IwAR1FyjuNdVOOy9_xzky3qqo_WeM5h-4gpRnnWhQr_O1Ef3h0AFnFXmCehK8
//
#define DOGLCD_A0 PE9
#define DOGLCD_CS PE8
#define LCD_BACKLIGHT_PIN -1
#define LCD_RESET_PIN PB12 // Must be high or open for LCD to operate normally.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN PB13
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN PB14
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN PB15
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define NEOPIXEL_PIN PB13
#endif
#else
#define LCD_PINS_RS PE9
#define LCD_PINS_ENABLE PE8
#define LCD_PINS_D4 PB12
#define LCD_PINS_D5 PB13
#define LCD_PINS_D6 PB14
#define LCD_PINS_D7 PB15
#if ENABLED(MKS_MINI_12864)
#define DOGLCD_CS PB13
#define DOGLCD_A0 PB14
#endif
#endif
#define BTN_EN1 PC4
#define BTN_EN2 PC5
#define BTN_ENC PC3
//
// Filament runout detection
//
#define FIL_RUNOUT_PIN PA3
//
// Extension pins
//