bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Optimize target_extruder, ignore T with mixing (#12432)

Browse Source 
* Optimize target_extruder, ignore T with mixing
* Give G-code Tn parity with tool_change
This commit is contained in:
Scott Lahteine
2018-11-14 17:33:04 -06:00
committed by GitHub
parent 5e586a6b39
commit d2bb53702a
18 changed files with 150 additions and 138 deletions
Download Patch File Download Diff File Expand all files Collapse all files

13
Marlin/src/gcode/config/M200-M205.cpp
View File

@ -34,7 +34,8 @@
*/
void GcodeSuite::M200() {
if (get_target_extruder_from_command()) return;
const int8_t target_extruder = get_target_extruder_from_command();
if (target_extruder < 0) return;
if (parser.seen('D')) {
// setting any extruder filament size disables volumetric on the assumption that
@ -55,11 +56,12 @@
*/
void GcodeSuite::M201() {
GET_TARGET_EXTRUDER();
const int8_t target_extruder = get_target_extruder_from_command();
if (target_extruder < 0) return;
LOOP_XYZE(i) {
if (parser.seen(axis_codes[i])) {
const uint8_t a = i + (i == E_AXIS ? TARGET_EXTRUDER : 0);
const uint8_t a = (i == E_AXIS ? E_AXIS_N(target_extruder) : i);
planner.settings.max_acceleration_mm_per_s2[a] = parser.value_axis_units((AxisEnum)a);
}
}
@ -74,11 +76,12 @@ void GcodeSuite::M201() {
*/
void GcodeSuite::M203() {
GET_TARGET_EXTRUDER();
const int8_t target_extruder = get_target_extruder_from_command();
if (target_extruder < 0) return;
LOOP_XYZE(i)
if (parser.seen(axis_codes[i])) {
const uint8_t a = i + (i == E_AXIS ? TARGET_EXTRUDER : 0);
const uint8_t a = (i == E_AXIS ? E_AXIS_N(target_extruder) : i);
planner.settings.max_feedrate_mm_s[a] = parser.value_axis_units((AxisEnum)a);
}
}

4
Marlin/src/gcode/config/M218.cpp
View File

@ -40,7 +40,9 @@
* Z<zoffset>
*/
void GcodeSuite::M218() {
if (get_target_extruder_from_command() || target_extruder == 0) return;
const int8_t target_extruder = get_target_extruder_from_command();
if (target_extruder < 0) return;
if (parser.seenval('X')) hotend_offset[X_AXIS][target_extruder] = parser.value_linear_units();
if (parser.seenval('Y')) hotend_offset[Y_AXIS][target_extruder] = parser.value_linear_units();

5
Marlin/src/gcode/config/M221.cpp
View File

@ -27,7 +27,10 @@
* M221: Set extrusion percentage (M221 T0 S95)
*/
void GcodeSuite::M221() {
if (get_target_extruder_from_command()) return;
const int8_t target_extruder = get_target_extruder_from_command();
if (target_extruder < 0) return;
if (parser.seenval('S')) {
planner.flow_percentage[target_extruder] = parser.value_int();
planner.refresh_e_factor(target_extruder);

13
Marlin/src/gcode/config/M92.cpp
View File

@ -31,21 +31,22 @@
*/
void GcodeSuite::M92() {
GET_TARGET_EXTRUDER();
const int8_t target_extruder = get_target_extruder_from_command();
if (target_extruder < 0) return;
LOOP_XYZE(i) {
if (parser.seen(axis_codes[i])) {
if (i == E_AXIS) {
const float value = parser.value_per_axis_units((AxisEnum)(E_AXIS + TARGET_EXTRUDER));
const float value = parser.value_per_axis_units((AxisEnum)(E_AXIS_N(target_extruder)));
if (value < 20) {
float factor = planner.settings.axis_steps_per_mm[E_AXIS + TARGET_EXTRUDER] / value; // increase e constants if M92 E14 is given for netfab.
float factor = planner.settings.axis_steps_per_mm[E_AXIS_N(target_extruder)] / value; // increase e constants if M92 E14 is given for netfab.
#if HAS_CLASSIC_JERK && (DISABLED(JUNCTION_DEVIATION) || DISABLED(LIN_ADVANCE))
planner.max_jerk[E_AXIS] *= factor;
#endif
planner.settings.max_feedrate_mm_s[E_AXIS + TARGET_EXTRUDER] *= factor;
planner.max_acceleration_steps_per_s2[E_AXIS + TARGET_EXTRUDER] *= factor;
planner.settings.max_feedrate_mm_s[E_AXIS_N(target_extruder)] *= factor;
planner.max_acceleration_steps_per_s2[E_AXIS_N(target_extruder)] *= factor;
}
planner.settings.axis_steps_per_mm[E_AXIS + TARGET_EXTRUDER] = value;
planner.settings.axis_steps_per_mm[E_AXIS_N(target_extruder)] = value;
}
else {
planner.settings.axis_steps_per_mm[i] = parser.value_per_axis_units((AxisEnum)i);