|
|
|
@ -1453,7 +1453,6 @@ inline float get_homing_bump_feedrate(AxisEnum axis) {
|
|
|
|
|
return homing_feedrate_mm_s[axis] / hbd;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#if !IS_KINEMATIC
|
|
|
|
|
//
|
|
|
|
|
// line_to_current_position
|
|
|
|
|
// Move the planner to the current position from wherever it last moved
|
|
|
|
@ -1472,8 +1471,6 @@ inline float get_homing_bump_feedrate(AxisEnum axis) {
|
|
|
|
|
}
|
|
|
|
|
inline void line_to_destination() { line_to_destination(feedrate_mm_s); }
|
|
|
|
|
|
|
|
|
|
#endif // !IS_KINEMATIC
|
|
|
|
|
|
|
|
|
|
inline void set_current_to_destination() { memcpy(current_position, destination, sizeof(current_position)); }
|
|
|
|
|
inline void set_destination_to_current() { memcpy(destination, current_position, sizeof(destination)); }
|
|
|
|
|
|
|
|
|
@ -1485,12 +1482,19 @@ inline void set_destination_to_current() { memcpy(destination, current_position,
|
|
|
|
|
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
|
|
|
|
if (DEBUGGING(LEVELING)) DEBUG_POS("prepare_uninterpolated_move_to_destination", destination);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
if ( current_position[X_AXIS] == destination[X_AXIS]
|
|
|
|
|
&& current_position[Y_AXIS] == destination[Y_AXIS]
|
|
|
|
|
&& current_position[Z_AXIS] == destination[Z_AXIS]
|
|
|
|
|
&& current_position[E_AXIS] == destination[E_AXIS]
|
|
|
|
|
) return;
|
|
|
|
|
|
|
|
|
|
refresh_cmd_timeout();
|
|
|
|
|
inverse_kinematics(destination);
|
|
|
|
|
planner.buffer_line(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], destination[E_AXIS], MMS_SCALED(fr_mm_s ? fr_mm_s : feedrate_mm_s), active_extruder);
|
|
|
|
|
set_current_to_destination();
|
|
|
|
|
}
|
|
|
|
|
#endif
|
|
|
|
|
#endif // IS_KINEMATIC
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
* Plan a move to (X, Y, Z) and set the current_position
|
|
|
|
@ -1557,16 +1561,12 @@ void do_blocking_move_to(const float &x, const float &y, const float &z, const f
|
|
|
|
|
#endif
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
|
|
|
|
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("<<< do_blocking_move_to");
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#elif IS_SCARA
|
|
|
|
|
|
|
|
|
|
set_destination_to_current();
|
|
|
|
|
|
|
|
|
|
// If Z needs to raise, do it before moving XY
|
|
|
|
|
if (current_position[Z_AXIS] < z) {
|
|
|
|
|
if (destination[Z_AXIS] < z) {
|
|
|
|
|
destination[Z_AXIS] = z;
|
|
|
|
|
prepare_uninterpolated_move_to_destination(fr_mm_s ? fr_mm_s : homing_feedrate_mm_s[Z_AXIS]);
|
|
|
|
|
}
|
|
|
|
@ -1576,7 +1576,7 @@ void do_blocking_move_to(const float &x, const float &y, const float &z, const f
|
|
|
|
|
prepare_uninterpolated_move_to_destination(fr_mm_s ? fr_mm_s : XY_PROBE_FEEDRATE_MM_S);
|
|
|
|
|
|
|
|
|
|
// If Z needs to lower, do it after moving XY
|
|
|
|
|
if (current_position[Z_AXIS] > z) {
|
|
|
|
|
if (destination[Z_AXIS] > z) {
|
|
|
|
|
destination[Z_AXIS] = z;
|
|
|
|
|
prepare_uninterpolated_move_to_destination(fr_mm_s ? fr_mm_s : homing_feedrate_mm_s[Z_AXIS]);
|
|
|
|
|
}
|
|
|
|
@ -1607,6 +1607,10 @@ void do_blocking_move_to(const float &x, const float &y, const float &z, const f
|
|
|
|
|
stepper.synchronize();
|
|
|
|
|
|
|
|
|
|
feedrate_mm_s = old_feedrate_mm_s;
|
|
|
|
|
|
|
|
|
|
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
|
|
|
|
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("<<< do_blocking_move_to");
|
|
|
|
|
#endif
|
|
|
|
|
}
|
|
|
|
|
void do_blocking_move_to_x(const float &x, const float &fr_mm_s/*=0.0*/) {
|
|
|
|
|
do_blocking_move_to(x, current_position[Y_AXIS], current_position[Z_AXIS], fr_mm_s);
|
|
|
|
@ -1999,12 +2003,12 @@ static void clean_up_after_endstop_or_probe_move() {
|
|
|
|
|
// Clear endstop flags
|
|
|
|
|
endstops.hit_on_purpose();
|
|
|
|
|
|
|
|
|
|
// Tell the planner where we actually are
|
|
|
|
|
planner.sync_from_steppers();
|
|
|
|
|
|
|
|
|
|
// Get Z where the steppers were interrupted
|
|
|
|
|
set_current_from_steppers_for_axis(Z_AXIS);
|
|
|
|
|
|
|
|
|
|
// Tell the planner where we actually are
|
|
|
|
|
SYNC_PLAN_POSITION_KINEMATIC();
|
|
|
|
|
|
|
|
|
|
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
|
|
|
|
if (DEBUGGING(LEVELING)) DEBUG_POS("<<< do_probe_move", current_position);
|
|
|
|
|
#endif
|
|
|
|
@ -2122,8 +2126,13 @@ static void clean_up_after_endstop_or_probe_move() {
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
* Reset calibration results to zero.
|
|
|
|
|
*
|
|
|
|
|
* TODO: Proper functions to disable / enable
|
|
|
|
|
* bed leveling via a flag, correcting the
|
|
|
|
|
* current position in each case.
|
|
|
|
|
*/
|
|
|
|
|
void reset_bed_level() {
|
|
|
|
|
planner.abl_enabled = false;
|
|
|
|
|
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
|
|
|
|
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("reset_bed_level");
|
|
|
|
|
#endif
|
|
|
|
@ -2131,7 +2140,6 @@ static void clean_up_after_endstop_or_probe_move() {
|
|
|
|
|
planner.bed_level_matrix.set_to_identity();
|
|
|
|
|
#elif ENABLED(AUTO_BED_LEVELING_NONLINEAR)
|
|
|
|
|
memset(bed_level_grid, 0, sizeof(bed_level_grid));
|
|
|
|
|
nonlinear_grid_spacing[X_AXIS] = nonlinear_grid_spacing[Y_AXIS] = 0;
|
|
|
|
|
#endif
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
@ -2188,18 +2196,27 @@ static void clean_up_after_endstop_or_probe_move() {
|
|
|
|
|
/**
|
|
|
|
|
* Home an individual linear axis
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
static void do_homing_move(AxisEnum axis, float where, float fr_mm_s=0.0) {
|
|
|
|
|
static void do_homing_move(const AxisEnum axis, float distance, float fr_mm_s=0.0) {
|
|
|
|
|
|
|
|
|
|
#if HOMING_Z_WITH_PROBE && ENABLED(BLTOUCH)
|
|
|
|
|
bool deploy_bltouch = (axis == Z_AXIS && where < 0);
|
|
|
|
|
if (deploy_bltouch) set_bltouch_deployed(true);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
// Tell the planner we're at Z=0
|
|
|
|
|
current_position[axis] = 0;
|
|
|
|
|
|
|
|
|
|
#if IS_SCARA
|
|
|
|
|
SYNC_PLAN_POSITION_KINEMATIC();
|
|
|
|
|
current_position[axis] = distance;
|
|
|
|
|
inverse_kinematics(current_position);
|
|
|
|
|
planner.buffer_line(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], current_position[E_AXIS], fr_mm_s ? fr_mm_s : homing_feedrate_mm_s[axis], active_extruder);
|
|
|
|
|
#else
|
|
|
|
|
sync_plan_position();
|
|
|
|
|
current_position[axis] = where;
|
|
|
|
|
current_position[axis] = distance;
|
|
|
|
|
planner.buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], fr_mm_s ? fr_mm_s : homing_feedrate_mm_s[axis], active_extruder);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
stepper.synchronize();
|
|
|
|
|
|
|
|
|
|
#if HOMING_Z_WITH_PROBE && ENABLED(BLTOUCH)
|
|
|
|
@ -2256,6 +2273,9 @@ static void homeaxis(AxisEnum axis) {
|
|
|
|
|
if (axis == Z_AXIS) stepper.set_homing_flag(true);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
// Fast move towards endstop until triggered
|
|
|
|
|
do_homing_move(axis, 1.5 * max_length(axis) * axis_home_dir);
|
|
|
|
|
|
|
|
|
|
// When homing Z with probe respect probe clearance
|
|
|
|
|
const float bump = axis_home_dir * (
|
|
|
|
|
#if HOMING_Z_WITH_PROBE
|
|
|
|
@ -2264,12 +2284,13 @@ static void homeaxis(AxisEnum axis) {
|
|
|
|
|
home_bump_mm(axis)
|
|
|
|
|
);
|
|
|
|
|
|
|
|
|
|
// 1. Fast move towards endstop until triggered
|
|
|
|
|
// 2. Move away from the endstop by the axis HOME_BUMP_MM
|
|
|
|
|
// 3. Slow move towards endstop until triggered
|
|
|
|
|
do_homing_move(axis, 1.5 * max_length(axis) * axis_home_dir);
|
|
|
|
|
// If a second homing move is configured...
|
|
|
|
|
if (bump) {
|
|
|
|
|
// Move away from the endstop by the axis HOME_BUMP_MM
|
|
|
|
|
do_homing_move(axis, -bump);
|
|
|
|
|
// Slow move towards endstop until triggered
|
|
|
|
|
do_homing_move(axis, 2 * bump, get_homing_bump_feedrate(axis));
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#if ENABLED(Z_DUAL_ENDSTOPS)
|
|
|
|
|
if (axis == Z_AXIS) {
|
|
|
|
@ -2849,7 +2870,8 @@ inline void gcode_G4() {
|
|
|
|
|
|
|
|
|
|
// Move all carriages together linearly until an endstop is hit.
|
|
|
|
|
current_position[X_AXIS] = current_position[Y_AXIS] = current_position[Z_AXIS] = (Z_MAX_LENGTH + 10);
|
|
|
|
|
planner.buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], homing_feedrate_mm_s[X_AXIS], active_extruder);
|
|
|
|
|
feedrate_mm_s = homing_feedrate_mm_s[X_AXIS];
|
|
|
|
|
line_to_current_position();
|
|
|
|
|
stepper.synchronize();
|
|
|
|
|
endstops.hit_on_purpose(); // clear endstop hit flags
|
|
|
|
|
|
|
|
|
@ -2902,22 +2924,20 @@ inline void gcode_G4() {
|
|
|
|
|
destination[Y_AXIS] = LOGICAL_Y_POSITION(Z_SAFE_HOMING_Y_POINT);
|
|
|
|
|
destination[Z_AXIS] = current_position[Z_AXIS]; // Z is already at the right height
|
|
|
|
|
|
|
|
|
|
#if HAS_BED_PROBE
|
|
|
|
|
destination[X_AXIS] -= X_PROBE_OFFSET_FROM_EXTRUDER;
|
|
|
|
|
destination[Y_AXIS] -= Y_PROBE_OFFSET_FROM_EXTRUDER;
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
|
|
|
|
if (DEBUGGING(LEVELING)) DEBUG_POS("Z_SAFE_HOMING", destination);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
if (position_is_reachable(
|
|
|
|
|
destination
|
|
|
|
|
#if HAS_BED_PROBE
|
|
|
|
|
#if HOMING_Z_WITH_PROBE
|
|
|
|
|
, true
|
|
|
|
|
#endif
|
|
|
|
|
)
|
|
|
|
|
) {
|
|
|
|
|
#if HOMING_Z_WITH_PROBE
|
|
|
|
|
destination[X_AXIS] -= X_PROBE_OFFSET_FROM_EXTRUDER;
|
|
|
|
|
destination[Y_AXIS] -= Y_PROBE_OFFSET_FROM_EXTRUDER;
|
|
|
|
|
#endif
|
|
|
|
|
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
|
|
|
|
if (DEBUGGING(LEVELING)) DEBUG_POS("Z_SAFE_HOMING", destination);
|
|
|
|
|
#endif
|
|
|
|
|
do_blocking_move_to_xy(destination[X_AXIS], destination[Y_AXIS]);
|
|
|
|
|
HOMEAXIS(Z);
|
|
|
|
|
}
|
|
|
|
@ -3133,19 +3153,13 @@ inline void gcode_G28() {
|
|
|
|
|
#if ENABLED(MESH_G28_REST_ORIGIN)
|
|
|
|
|
current_position[Z_AXIS] = 0.0;
|
|
|
|
|
set_destination_to_current();
|
|
|
|
|
feedrate_mm_s = homing_feedrate_mm_s[Z_AXIS];
|
|
|
|
|
line_to_destination();
|
|
|
|
|
line_to_destination(homing_feedrate_mm_s[Z_AXIS]);
|
|
|
|
|
stepper.synchronize();
|
|
|
|
|
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
|
|
|
|
if (DEBUGGING(LEVELING)) DEBUG_POS("MBL Rest Origin", current_position);
|
|
|
|
|
#endif
|
|
|
|
|
#else
|
|
|
|
|
current_position[Z_AXIS] = MESH_HOME_SEARCH_Z -
|
|
|
|
|
mbl.get_z(RAW_CURRENT_POSITION(X_AXIS), RAW_CURRENT_POSITION(Y_AXIS))
|
|
|
|
|
#if Z_HOME_DIR > 0
|
|
|
|
|
+ Z_MAX_POS
|
|
|
|
|
#endif
|
|
|
|
|
;
|
|
|
|
|
planner.unapply_leveling(current_position);
|
|
|
|
|
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
|
|
|
|
if (DEBUGGING(LEVELING)) DEBUG_POS("MBL adjusted MESH_HOME_SEARCH_Z", current_position);
|
|
|
|
|
#endif
|
|
|
|
@ -3155,8 +3169,7 @@ inline void gcode_G28() {
|
|
|
|
|
current_position[Z_AXIS] = pre_home_z;
|
|
|
|
|
SYNC_PLAN_POSITION_KINEMATIC();
|
|
|
|
|
mbl.set_active(true);
|
|
|
|
|
current_position[Z_AXIS] = pre_home_z -
|
|
|
|
|
mbl.get_z(RAW_CURRENT_POSITION(X_AXIS), RAW_CURRENT_POSITION(Y_AXIS));
|
|
|
|
|
planner.unapply_leveling(current_position);
|
|
|
|
|
#if ENABLED(DEBUG_LEVELING_FEATURE)
|
|
|
|
|
if (DEBUGGING(LEVELING)) DEBUG_POS("MBL Home X or Y", current_position);
|
|
|
|
|
#endif
|
|
|
|
@ -3505,16 +3518,15 @@ inline void gcode_G28() {
|
|
|
|
|
|
|
|
|
|
stepper.synchronize();
|
|
|
|
|
|
|
|
|
|
// Disable auto bed leveling during G29
|
|
|
|
|
bool auto_bed_leveling_was_enabled = planner.abl_enabled,
|
|
|
|
|
abl_should_reenable = auto_bed_leveling_was_enabled;
|
|
|
|
|
|
|
|
|
|
planner.abl_enabled = false;
|
|
|
|
|
|
|
|
|
|
if (!dryrun) {
|
|
|
|
|
|
|
|
|
|
// Reset the bed_level_matrix because leveling
|
|
|
|
|
// needs to be done without leveling enabled.
|
|
|
|
|
reset_bed_level();
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// Re-orient the current position without leveling
|
|
|
|
|
// based on where the steppers are positioned.
|
|
|
|
|
//
|
|
|
|
|
get_cartesian_from_steppers();
|
|
|
|
|
memcpy(current_position, cartes, sizeof(cartes));
|
|
|
|
|
|
|
|
|
@ -3525,9 +3537,12 @@ inline void gcode_G28() {
|
|
|
|
|
setup_for_endstop_or_probe_move();
|
|
|
|
|
|
|
|
|
|
// Deploy the probe. Probe will raise if needed.
|
|
|
|
|
if (DEPLOY_PROBE()) return;
|
|
|
|
|
if (DEPLOY_PROBE()) {
|
|
|
|
|
planner.abl_enabled = abl_should_reenable;
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
float xProbe, yProbe, measured_z = 0;
|
|
|
|
|
float xProbe = 0, yProbe = 0, measured_z = 0;
|
|
|
|
|
|
|
|
|
|
#if ENABLED(AUTO_BED_LEVELING_GRID)
|
|
|
|
|
|
|
|
|
@ -3537,11 +3552,16 @@ inline void gcode_G28() {
|
|
|
|
|
|
|
|
|
|
#if ENABLED(AUTO_BED_LEVELING_NONLINEAR)
|
|
|
|
|
|
|
|
|
|
nonlinear_grid_spacing[X_AXIS] = xGridSpacing;
|
|
|
|
|
nonlinear_grid_spacing[Y_AXIS] = yGridSpacing;
|
|
|
|
|
float zoffset = zprobe_zoffset;
|
|
|
|
|
if (code_seen('Z')) zoffset += code_value_axis_units(Z_AXIS);
|
|
|
|
|
|
|
|
|
|
if (xGridSpacing != nonlinear_grid_spacing[X_AXIS] || yGridSpacing != nonlinear_grid_spacing[Y_AXIS]) {
|
|
|
|
|
nonlinear_grid_spacing[X_AXIS] = xGridSpacing;
|
|
|
|
|
nonlinear_grid_spacing[Y_AXIS] = yGridSpacing;
|
|
|
|
|
// Can't re-enable (on error) until the new grid is written
|
|
|
|
|
abl_should_reenable = false;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#elif ENABLED(AUTO_BED_LEVELING_LINEAR_GRID)
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
@ -3600,6 +3620,11 @@ inline void gcode_G28() {
|
|
|
|
|
|
|
|
|
|
measured_z = probe_pt(xProbe, yProbe, stow_probe_after_each, verbose_level);
|
|
|
|
|
|
|
|
|
|
if (measured_z == NAN) {
|
|
|
|
|
planner.abl_enabled = abl_should_reenable;
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#if ENABLED(AUTO_BED_LEVELING_LINEAR_GRID)
|
|
|
|
|
|
|
|
|
|
mean += measured_z;
|
|
|
|
@ -3639,6 +3664,11 @@ inline void gcode_G28() {
|
|
|
|
|
measured_z = points[i].z = probe_pt(xProbe, yProbe, stow_probe_after_each, verbose_level);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (measured_z == NAN) {
|
|
|
|
|
planner.abl_enabled = abl_should_reenable;
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (!dryrun) {
|
|
|
|
|
vector_3 planeNormal = vector_3::cross(points[0] - points[1], points[2] - points[1]).get_normal();
|
|
|
|
|
if (planeNormal.z < 0) {
|
|
|
|
@ -3647,12 +3677,23 @@ inline void gcode_G28() {
|
|
|
|
|
planeNormal.z *= -1;
|
|
|
|
|
}
|
|
|
|
|
planner.bed_level_matrix = matrix_3x3::create_look_at(planeNormal);
|
|
|
|
|
|
|
|
|
|
// Can't re-enable (on error) until the new grid is written
|
|
|
|
|
abl_should_reenable = false;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#endif // AUTO_BED_LEVELING_3POINT
|
|
|
|
|
|
|
|
|
|
// Raise to _Z_CLEARANCE_DEPLOY_PROBE. Stow the probe.
|
|
|
|
|
if (STOW_PROBE()) return;
|
|
|
|
|
if (STOW_PROBE()) {
|
|
|
|
|
planner.abl_enabled = abl_should_reenable;
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// Unless this is a dry run, auto bed leveling will
|
|
|
|
|
// definitely be enabled after this point
|
|
|
|
|
//
|
|
|
|
|
|
|
|
|
|
// Restore state after probing
|
|
|
|
|
clean_up_after_endstop_or_probe_move();
|
|
|
|
@ -3842,6 +3883,9 @@ inline void gcode_G28() {
|
|
|
|
|
report_current_position();
|
|
|
|
|
|
|
|
|
|
KEEPALIVE_STATE(IN_HANDLER);
|
|
|
|
|
|
|
|
|
|
// Auto Bed Leveling is complete! Enable if possible.
|
|
|
|
|
planner.abl_enabled = dryrun ? abl_should_reenable : true;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#endif // AUTO_BED_LEVELING_FEATURE
|
|
|
|
@ -3925,6 +3969,8 @@ inline void gcode_G92() {
|
|
|
|
|
SYNC_PLAN_POSITION_KINEMATIC();
|
|
|
|
|
else if (didE)
|
|
|
|
|
sync_plan_position_e();
|
|
|
|
|
|
|
|
|
|
report_current_position();
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#if ENABLED(ULTIPANEL) || ENABLED(EMERGENCY_PARSER)
|
|
|
|
@ -4186,7 +4232,11 @@ inline void gcode_M42() {
|
|
|
|
|
if (pin_number < 0) return;
|
|
|
|
|
|
|
|
|
|
for (uint8_t i = 0; i < COUNT(sensitive_pins); i++)
|
|
|
|
|
if (pin_number == sensitive_pins[i]) return;
|
|
|
|
|
if (pin_number == sensitive_pins[i]) {
|
|
|
|
|
SERIAL_ERROR_START;
|
|
|
|
|
SERIAL_ERRORLNPGM(MSG_ERR_PROTECTED_PIN);
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
pinMode(pin_number, OUTPUT);
|
|
|
|
|
digitalWrite(pin_number, pin_status);
|
|
|
|
@ -7736,7 +7786,7 @@ void ok_to_send() {
|
|
|
|
|
|
|
|
|
|
// Get the Z adjustment for non-linear bed leveling
|
|
|
|
|
float nonlinear_z_offset(float cartesian[XYZ]) {
|
|
|
|
|
if (nonlinear_grid_spacing[X_AXIS] == 0 || nonlinear_grid_spacing[Y_AXIS] == 0) return 0; // G29 not done!
|
|
|
|
|
if (planner.abl_enabled) return;
|
|
|
|
|
|
|
|
|
|
int half_x = (ABL_GRID_POINTS_X - 1) / 2,
|
|
|
|
|
half_y = (ABL_GRID_POINTS_Y - 1) / 2;
|
|
|
|
@ -7846,15 +7896,19 @@ void ok_to_send() {
|
|
|
|
|
) \
|
|
|
|
|
)
|
|
|
|
|
|
|
|
|
|
#define DELTA_RAW_IK() do { \
|
|
|
|
|
delta[A_AXIS] = DELTA_Z(1); \
|
|
|
|
|
delta[B_AXIS] = DELTA_Z(2); \
|
|
|
|
|
delta[C_AXIS] = DELTA_Z(3); \
|
|
|
|
|
} while(0)
|
|
|
|
|
|
|
|
|
|
#define DELTA_LOGICAL_IK() do { \
|
|
|
|
|
const float raw[XYZ] = { \
|
|
|
|
|
RAW_X_POSITION(logical[X_AXIS]), \
|
|
|
|
|
RAW_Y_POSITION(logical[Y_AXIS]), \
|
|
|
|
|
RAW_Z_POSITION(logical[Z_AXIS]) \
|
|
|
|
|
}; \
|
|
|
|
|
delta[A_AXIS] = DELTA_Z(1); \
|
|
|
|
|
delta[B_AXIS] = DELTA_Z(2); \
|
|
|
|
|
delta[C_AXIS] = DELTA_Z(3); \
|
|
|
|
|
DELTA_RAW_IK(); \
|
|
|
|
|
} while(0)
|
|
|
|
|
|
|
|
|
|
#define DELTA_DEBUG() do { \
|
|
|
|
@ -8012,7 +8066,7 @@ void get_cartesian_from_steppers() {
|
|
|
|
|
void set_current_from_steppers_for_axis(const AxisEnum axis) {
|
|
|
|
|
get_cartesian_from_steppers();
|
|
|
|
|
#if PLANNER_LEVELING
|
|
|
|
|
planner.unapply_leveling(cartes[X_AXIS], cartes[Y_AXIS], cartes[Z_AXIS]);
|
|
|
|
|
planner.unapply_leveling(cartes);
|
|
|
|
|
#endif
|
|
|
|
|
if (axis == ALL_AXES)
|
|
|
|
|
memcpy(current_position, cartes, sizeof(cartes));
|
|
|
|
@ -8091,101 +8145,123 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) {
|
|
|
|
|
* This calls planner.buffer_line several times, adding
|
|
|
|
|
* small incremental moves for DELTA or SCARA.
|
|
|
|
|
*/
|
|
|
|
|
inline bool prepare_kinematic_move_to(float logical[NUM_AXIS]) {
|
|
|
|
|
inline bool prepare_kinematic_move_to(float ltarget[NUM_AXIS]) {
|
|
|
|
|
|
|
|
|
|
// Get the top feedrate of the move in the XY plane
|
|
|
|
|
float _feedrate_mm_s = MMS_SCALED(feedrate_mm_s);
|
|
|
|
|
|
|
|
|
|
// If the move is only in Z don't split up the move.
|
|
|
|
|
// This shortcut cannot be used if planar bed leveling
|
|
|
|
|
// is in use, but is fine with mesh-based bed leveling
|
|
|
|
|
if (logical[X_AXIS] == current_position[X_AXIS] && logical[Y_AXIS] == current_position[Y_AXIS]) {
|
|
|
|
|
inverse_kinematics(logical);
|
|
|
|
|
planner.buffer_line(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], logical[E_AXIS], _feedrate_mm_s, active_extruder);
|
|
|
|
|
// If the move is only in Z/E don't split up the move
|
|
|
|
|
if (ltarget[X_AXIS] == current_position[X_AXIS] && ltarget[Y_AXIS] == current_position[Y_AXIS]) {
|
|
|
|
|
inverse_kinematics(ltarget);
|
|
|
|
|
planner.buffer_line(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], ltarget[E_AXIS], _feedrate_mm_s, active_extruder);
|
|
|
|
|
return true;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
// Get the distance moved in XYZ
|
|
|
|
|
// Get the cartesian distances moved in XYZE
|
|
|
|
|
float difference[NUM_AXIS];
|
|
|
|
|
LOOP_XYZE(i) difference[i] = logical[i] - current_position[i];
|
|
|
|
|
LOOP_XYZE(i) difference[i] = ltarget[i] - current_position[i];
|
|
|
|
|
|
|
|
|
|
// Get the linear distance in XYZ
|
|
|
|
|
float cartesian_mm = sqrt(sq(difference[X_AXIS]) + sq(difference[Y_AXIS]) + sq(difference[Z_AXIS]));
|
|
|
|
|
|
|
|
|
|
// If the move is very short, check the E move distance
|
|
|
|
|
if (UNEAR_ZERO(cartesian_mm)) cartesian_mm = abs(difference[E_AXIS]);
|
|
|
|
|
|
|
|
|
|
// No E move either? Game over.
|
|
|
|
|
if (UNEAR_ZERO(cartesian_mm)) return false;
|
|
|
|
|
|
|
|
|
|
// Minimum number of seconds to move the given distance
|
|
|
|
|
float seconds = cartesian_mm / _feedrate_mm_s;
|
|
|
|
|
|
|
|
|
|
// The number of segments-per-second times the duration
|
|
|
|
|
// gives the number of segments we should produce
|
|
|
|
|
// gives the number of segments
|
|
|
|
|
uint16_t segments = delta_segments_per_second * seconds;
|
|
|
|
|
|
|
|
|
|
// For SCARA minimum segment size is 0.5mm
|
|
|
|
|
#if IS_SCARA
|
|
|
|
|
NOMORE(segments, cartesian_mm * 2);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
// At least one segment is required
|
|
|
|
|
NOLESS(segments, 1);
|
|
|
|
|
|
|
|
|
|
// Each segment produces this much of the move
|
|
|
|
|
float inv_segments = 1.0 / segments,
|
|
|
|
|
segment_distance[XYZE] = {
|
|
|
|
|
difference[X_AXIS] * inv_segments,
|
|
|
|
|
difference[Y_AXIS] * inv_segments,
|
|
|
|
|
difference[Z_AXIS] * inv_segments,
|
|
|
|
|
difference[E_AXIS] * inv_segments
|
|
|
|
|
// The approximate length of each segment
|
|
|
|
|
float segment_distance[XYZE] = {
|
|
|
|
|
difference[X_AXIS] / segments,
|
|
|
|
|
difference[Y_AXIS] / segments,
|
|
|
|
|
difference[Z_AXIS] / segments,
|
|
|
|
|
difference[E_AXIS] / segments
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
// SERIAL_ECHOPAIR("mm=", cartesian_mm);
|
|
|
|
|
// SERIAL_ECHOPAIR(" seconds=", seconds);
|
|
|
|
|
// SERIAL_ECHOLNPAIR(" segments=", segments);
|
|
|
|
|
|
|
|
|
|
// Send all the segments to the planner
|
|
|
|
|
// Drop one segment so the last move is to the exact target.
|
|
|
|
|
// If there's only 1 segment, loops will be skipped entirely.
|
|
|
|
|
--segments;
|
|
|
|
|
|
|
|
|
|
#if ENABLED(DELTA) && ENABLED(USE_RAW_KINEMATICS)
|
|
|
|
|
// Using "raw" coordinates saves 6 float subtractions
|
|
|
|
|
// per segment, saving valuable CPU cycles
|
|
|
|
|
|
|
|
|
|
#define DELTA_E raw[E_AXIS]
|
|
|
|
|
#define DELTA_NEXT(ADDEND) LOOP_XYZE(i) raw[i] += ADDEND;
|
|
|
|
|
#define DELTA_IK() do { \
|
|
|
|
|
delta[A_AXIS] = DELTA_Z(1); \
|
|
|
|
|
delta[B_AXIS] = DELTA_Z(2); \
|
|
|
|
|
delta[C_AXIS] = DELTA_Z(3); \
|
|
|
|
|
} while(0)
|
|
|
|
|
#if ENABLED(USE_RAW_KINEMATICS)
|
|
|
|
|
|
|
|
|
|
// Get the raw current position as starting point
|
|
|
|
|
float raw[ABC] = {
|
|
|
|
|
float raw[XYZE] = {
|
|
|
|
|
RAW_CURRENT_POSITION(X_AXIS),
|
|
|
|
|
RAW_CURRENT_POSITION(Y_AXIS),
|
|
|
|
|
RAW_CURRENT_POSITION(Z_AXIS)
|
|
|
|
|
RAW_CURRENT_POSITION(Z_AXIS),
|
|
|
|
|
current_position[E_AXIS]
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
#define DELTA_VAR raw
|
|
|
|
|
|
|
|
|
|
// Delta can inline its kinematics
|
|
|
|
|
#if ENABLED(DELTA)
|
|
|
|
|
#define DELTA_IK() DELTA_RAW_IK()
|
|
|
|
|
#else
|
|
|
|
|
#define DELTA_IK() inverse_kinematics(raw)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#else
|
|
|
|
|
|
|
|
|
|
#define DELTA_E logical[E_AXIS]
|
|
|
|
|
#define DELTA_NEXT(ADDEND) LOOP_XYZE(i) logical[i] += ADDEND;
|
|
|
|
|
// Get the logical current position as starting point
|
|
|
|
|
float logical[XYZE];
|
|
|
|
|
memcpy(logical, current_position, sizeof(logical));
|
|
|
|
|
|
|
|
|
|
#define DELTA_VAR logical
|
|
|
|
|
|
|
|
|
|
// Delta can inline its kinematics
|
|
|
|
|
#if ENABLED(DELTA)
|
|
|
|
|
#define DELTA_IK() DELTA_LOGICAL_IK()
|
|
|
|
|
#else
|
|
|
|
|
#define DELTA_IK() inverse_kinematics(logical)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
// Get the logical current position as starting point
|
|
|
|
|
LOOP_XYZE(i) logical[i] = current_position[i];
|
|
|
|
|
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if ENABLED(USE_DELTA_IK_INTERPOLATION)
|
|
|
|
|
|
|
|
|
|
// Get the starting delta for interpolation
|
|
|
|
|
if (segments >= 2) inverse_kinematics(logical);
|
|
|
|
|
// Only interpolate XYZ. Advance E normally.
|
|
|
|
|
#define DELTA_NEXT(ADDEND) LOOP_XYZ(i) DELTA_VAR[i] += ADDEND;
|
|
|
|
|
|
|
|
|
|
// Get the starting delta if interpolation is possible
|
|
|
|
|
if (segments >= 2) DELTA_IK();
|
|
|
|
|
|
|
|
|
|
// Loop using decrement
|
|
|
|
|
for (uint16_t s = segments + 1; --s;) {
|
|
|
|
|
if (s > 1) {
|
|
|
|
|
// Are there at least 2 moves left?
|
|
|
|
|
if (s >= 2) {
|
|
|
|
|
// Save the previous delta for interpolation
|
|
|
|
|
float prev_delta[ABC] = { delta[A_AXIS], delta[B_AXIS], delta[C_AXIS] };
|
|
|
|
|
|
|
|
|
|
// Get the delta 2 segments ahead (rather than the next)
|
|
|
|
|
DELTA_NEXT(segment_distance[i] + segment_distance[i]);
|
|
|
|
|
|
|
|
|
|
// Advance E normally
|
|
|
|
|
DELTA_VAR[E_AXIS] += segment_distance[E_AXIS];
|
|
|
|
|
|
|
|
|
|
// Get the exact delta for the move after this
|
|
|
|
|
DELTA_IK();
|
|
|
|
|
|
|
|
|
|
// Move to the interpolated delta position first
|
|
|
|
@ -8193,33 +8269,43 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) {
|
|
|
|
|
(prev_delta[A_AXIS] + delta[A_AXIS]) * 0.5,
|
|
|
|
|
(prev_delta[B_AXIS] + delta[B_AXIS]) * 0.5,
|
|
|
|
|
(prev_delta[C_AXIS] + delta[C_AXIS]) * 0.5,
|
|
|
|
|
logical[E_AXIS], _feedrate_mm_s, active_extruder
|
|
|
|
|
DELTA_VAR[E_AXIS], _feedrate_mm_s, active_extruder
|
|
|
|
|
);
|
|
|
|
|
|
|
|
|
|
// Advance E once more for the next move
|
|
|
|
|
DELTA_VAR[E_AXIS] += segment_distance[E_AXIS];
|
|
|
|
|
|
|
|
|
|
// Do an extra decrement of the loop
|
|
|
|
|
--s;
|
|
|
|
|
}
|
|
|
|
|
else {
|
|
|
|
|
// Get the last segment delta (only when segments is odd)
|
|
|
|
|
DELTA_NEXT(segment_distance[i])
|
|
|
|
|
// Get the last segment delta. (Used when segments is odd)
|
|
|
|
|
DELTA_NEXT(segment_distance[i]);
|
|
|
|
|
DELTA_VAR[E_AXIS] += segment_distance[E_AXIS];
|
|
|
|
|
DELTA_IK();
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
// Move to the non-interpolated position
|
|
|
|
|
planner.buffer_line(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], DELTA_E, _feedrate_mm_s, active_extruder);
|
|
|
|
|
planner.buffer_line(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], DELTA_VAR[E_AXIS], _feedrate_mm_s, active_extruder);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#else
|
|
|
|
|
|
|
|
|
|
#define DELTA_NEXT(ADDEND) LOOP_XYZE(i) DELTA_VAR[i] += ADDEND;
|
|
|
|
|
|
|
|
|
|
// For non-interpolated delta calculate every segment
|
|
|
|
|
for (uint16_t s = segments + 1; --s;) {
|
|
|
|
|
DELTA_NEXT(segment_distance[i])
|
|
|
|
|
DELTA_NEXT(segment_distance[i]);
|
|
|
|
|
DELTA_IK();
|
|
|
|
|
planner.buffer_line(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], logical[E_AXIS], _feedrate_mm_s, active_extruder);
|
|
|
|
|
planner.buffer_line(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], DELTA_VAR[E_AXIS], _feedrate_mm_s, active_extruder);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
// Since segment_distance is only approximate,
|
|
|
|
|
// the final move must be to the exact destination.
|
|
|
|
|
inverse_kinematics(ltarget);
|
|
|
|
|
planner.buffer_line(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], ltarget[E_AXIS], _feedrate_mm_s, active_extruder);
|
|
|
|
|
return true;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
@ -8554,7 +8640,7 @@ void prepare_move_to_destination() {
|
|
|
|
|
cartes[Y_AXIS] = a_sin + b_sin + SCARA_OFFSET_Y; //theta+phi
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
SERIAL_ECHOPAIR("Angle a=", a);
|
|
|
|
|
SERIAL_ECHOPAIR("SCARA FK Angle a=", a);
|
|
|
|
|
SERIAL_ECHOPAIR(" b=", b);
|
|
|
|
|
SERIAL_ECHOPAIR(" a_sin=", a_sin);
|
|
|
|
|
SERIAL_ECHOPAIR(" a_cos=", a_cos);
|
|
|
|
|