diff --git a/.travis.yml b/.travis.yml
index 766b2933c9..d106cbd176 100644
--- a/.travis.yml
+++ b/.travis.yml
@@ -49,20 +49,20 @@ script:
   # backup configuration.h
   - cp Marlin/Configuration.h Marlin/Configuration.h.backup
   - cp Marlin/Configuration_adv.h Marlin/Configuration_adv.h.backup
-  - cp Marlin/pins_RAMPS_13.h Marlin/pins_RAMPS_13.h.backup
+  - cp Marlin/pins_RAMPS_14.h Marlin/pins_RAMPS_14.h.backup
   # add sensor for bed
   - sed -i 's/#define TEMP_SENSOR_BED 0/#define TEMP_SENSOR_BED 1/g' Marlin/Configuration.h
   - rm -rf .build/
   - DISPLAY=:1.0 ~/bin/arduino --verify --board marlin:avr:mega  Marlin/Marlin.ino
   # change extruder numbers from 1 to 2
-  - sed -i 's/#define MOTHERBOARD BOARD_RAMPS_13_EFB/#define MOTHERBOARD BOARD_RAMPS_13_EEB/g' Marlin/Configuration.h
+  - sed -i 's/#define MOTHERBOARD BOARD_RAMPS_14_EFB/#define MOTHERBOARD BOARD_RAMPS_14_EEB/g' Marlin/Configuration.h
   - sed -i 's/#define EXTRUDERS 1/#define EXTRUDERS 2/g' Marlin/Configuration.h
   - sed -i 's/#define TEMP_SENSOR_1 0/#define TEMP_SENSOR_1 1/g' Marlin/Configuration.h
   #- cat Marlin/Configuration.h
   - rm -rf .build/
   - DISPLAY=:1.0 ~/bin/arduino --verify --board marlin:avr:mega  Marlin/Marlin.ino
   # change extruder numbers from 2 to 3, needs to be a board with 3 extruders defined in pins.h 
-  - sed -i 's/#define MOTHERBOARD BOARD_RAMPS_13_EEB/#define MOTHERBOARD BOARD_RUMBA/g' Marlin/Configuration.h
+  - sed -i 's/#define MOTHERBOARD BOARD_RAMPS_14_EEB/#define MOTHERBOARD BOARD_RUMBA/g' Marlin/Configuration.h
   - sed -i 's/#define EXTRUDERS 2/#define EXTRUDERS 3/g' Marlin/Configuration.h
   - sed -i 's/#define TEMP_SENSOR_2 0/#define TEMP_SENSOR_2 1/g' Marlin/Configuration.h
   - rm -rf .build/
@@ -175,13 +175,13 @@ script:
   - cp Marlin/Configuration.h.backup Marlin/Configuration.h
   - sed -i 's/\/\/#define Z_DUAL_STEPPER_DRIVERS/#define Z_DUAL_STEPPER_DRIVERS/g' Marlin/Configuration_adv.h
   - sed -i 's/\ \ \/\/\ \#define Z_DUAL_ENDSTOPS/#define Z_DUAL_ENDSTOPS/g' Marlin/Configuration_adv.h
-  - sed -i 's/#define X_MAX_PIN           2/#define X_MAX_PIN          -1/g' Marlin/pins_RAMPS_13.h
+  - sed -i 's/#define X_MAX_PIN           2/#define X_MAX_PIN          -1/g' Marlin/pins_RAMPS_14.h
   - sed -i 's/\ \ \ \ \#define Z2_MAX_PIN 36/#define Z2_MAX_PIN  2/g' Marlin/Configuration_adv.h
   - rm -rf .build/
   - DISPLAY=:1.0 ~/bin/arduino --verify --board marlin:avr:mega  Marlin/Marlin.ino
   - cp Marlin/Configuration.h.backup Marlin/Configuration.h
   - cp Marlin/Configuration_adv.h.backup Marlin/Configuration_adv.h
-  - cp Marlin/pins_RAMPS_13.h.backup Marlin/pins_RAMPS_13.h
+  - cp Marlin/pins_RAMPS_14.h.backup Marlin/pins_RAMPS_14.h
   ######## Example Configurations ##############
   # Delta Config (generic)
   - cp Marlin/example_configurations/delta/generic/Configuration* Marlin/
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 80f42a31fd..26aefa3e8a 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -70,7 +70,7 @@ Here are some standard links for getting your machine calibrated:
 // The following define selects which electronics board you have.
 // Please choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
-  #define MOTHERBOARD BOARD_RAMPS_13_EFB
+  #define MOTHERBOARD BOARD_RAMPS_14_EFB
 #endif
 
 // Optional custom name for your RepStrap or other custom machine
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index a663f5230f..86faed1a02 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -95,7 +95,7 @@ Here are some standard links for getting your machine calibrated:
 // The following define selects which electronics board you have.
 // Please choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
-  #define MOTHERBOARD BOARD_RAMPS_13_EFB
+  #define MOTHERBOARD BOARD_RAMPS_14_EFB
 #endif
 
 // Optional custom name for your RepStrap or other custom machine
diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h
index 84c42c0ff1..06d3652beb 100644
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@@ -70,7 +70,7 @@ Here are some standard links for getting your machine calibrated:
 // The following define selects which electronics board you have.
 // Please choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
-  #define MOTHERBOARD BOARD_RAMPS_13_EFB
+  #define MOTHERBOARD BOARD_RAMPS_14_EFB
 #endif
 
 // Optional custom name for your RepStrap or other custom machine
diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
index 96877a10a0..9d59bd358f 100644
--- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h
+++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
@@ -70,7 +70,7 @@ Here are some standard links for getting your machine calibrated:
 // The following define selects which electronics board you have.
 // Please choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
-  #define MOTHERBOARD BOARD_RAMPS_13_EFB
+  #define MOTHERBOARD BOARD_RAMPS_14_EFB
 #endif
 
 // Optional custom name for your RepStrap or other custom machine
diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
index d4ca7ed30d..228fe96d6b 100644
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -70,7 +70,7 @@ Here are some standard links for getting your machine calibrated:
 // The following define selects which electronics board you have.
 // Please choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
-  #define MOTHERBOARD BOARD_RAMPS_13_EFB
+  #define MOTHERBOARD BOARD_RAMPS_14_EFB
 #endif
 
 // Optional custom name for your RepStrap or other custom machine
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index 3fbc9d34c7..2ad07c9220 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -70,7 +70,7 @@ Here are some standard links for getting your machine calibrated:
 // The following define selects which electronics board you have.
 // Please choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
-  #define MOTHERBOARD BOARD_RAMPS_13_EFB
+  #define MOTHERBOARD BOARD_RAMPS_14_EFB
 #endif
 
 // Optional custom name for your RepStrap or other custom machine