Fysetc S6 support (#15850)

buildroot/share/PlatformIO/variants/FYSETC_S6/variant.h

@@ -0,0 +1,181 @@
+/*
+  Copyright (c) 2011 Arduino.  All right reserved.
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef _VARIANT_ARDUINO_STM32_
+#define _VARIANT_ARDUINO_STM32_
+
+#ifdef __cplusplus
+extern "C" {
+#endif // __cplusplus
+
+/*----------------------------------------------------------------------------
+ *        Pins
+ *----------------------------------------------------------------------------*/
+
+#define PA0   0  //D0
+#define PA1   1  //D1
+#define PA2   2  //D2
+#define PA3   3  //D3
+#define PA4   4  //D4
+#define PA5   5  //D5
+#define PA6   6  //D6
+#define PA7   7  //D7
+#define PA8   8  //D8
+#define PA9   9  //D9
+#define PA10  10 //D10
+#define PA11  11 //D11
+#define PA12  12 //D12
+#define PA13  13 //D13
+#define PA14  14 //D14
+#define PA15  15 //D15
+#define PB0   16 //D16
+#define PB1   17 //D17
+#define PB2   18 //D18
+#define PB3   19 //D19
+#define PB4   20 //D20
+#define PB5   21 //D21
+#define PB6   22 //D22
+#define PB7   23 //D23
+#define PB8   24 //D24
+#define PB9   25 //D25
+#define PB10  26 //D26
+#define PB11  27 //D27
+#define PB12  28 //D28
+#define PB13  29 //D29
+#define PB14  30 //D30
+#define PB15  31 //D31
+#define PC0   32 //D32
+#define PC1   33 //D33
+#define PC2   34 //D34
+#define PC3   35 //D35
+#define PC4   36 //D36
+#define PC5   37 //D37
+#define PC6   38 //D38
+#define PC7   39 //D39
+#define PC8   40 //D40
+#define PC9   41 //D41
+#define PC10  42 //D42
+#define PC11  43 //D43
+#define PC12  44 //D44
+#define PC13  45 //D45
+#define PC14  46 //D46
+#define PC15  47 //D47
+#define PD0   48 //D48
+#define PD1   49 //D49
+#define PD2   50 //D50
+#define PD3   51 //D51
+#define PD4   52 //D52
+#define PD5   53 //D53
+#define PD6   54 //D54
+#define PD7   55 //D55
+#define PD8   56 //D56
+#define PD9   57 //D57
+#define PD10  58 //D58
+#define PD11  59 //D59
+#define PD12  60 //D60
+#define PD13  61 //D61
+#define PD14  62 //D62
+#define PD15  63 //D63
+#define PE0   64 //D64
+#define PE1   65 //D65
+#define PE2   66 //D66
+#define PE3   67 //D67
+#define PE4   68 //D68
+#define PE5   69 //D69
+#define PE6   70 //D70
+#define PE7   71 //D71
+#define PE8   72 //D72
+#define PE9   73 //D73
+#define PE10  74 //D74
+#define PE11  75 //D75
+#define PE12  76 //D76
+#define PE13  77 //D77
+#define PE14  78 //D78
+#define PE15  79 //D79
+
+// This must be a literal with the same value as PEND
+#define NUM_DIGITAL_PINS        87
+// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS
+#define NUM_ANALOG_INPUTS       7
+#define NUM_ANALOG_FIRST        80
+
+// PWM resolution
+#define PWM_RESOLUTION          8
+#define PWM_FREQUENCY           20000 // >= 20 Khz => inaudible noise for fans
+#define PWM_MAX_DUTY_CYCLE      255
+
+// SPI Definitions
+#define PIN_SPI_SS              PA4
+#define PIN_SPI_MOSI            PA7
+#define PIN_SPI_MISO            PA6
+#define PIN_SPI_SCK             PA5
+
+// I2C Definitions
+#define PIN_WIRE_SDA            PB9
+#define PIN_WIRE_SCL            PB8
+
+// Timer Definitions
+// Do not use timer used by PWM pin. See PinMap_PWM.
+#define TIMER_TONE              TIM6
+#define TIMER_SERVO             TIM14
+#define TIMER_SERIAL            TIM7
+
+// UART Definitions
+//#define SERIAL_UART_INSTANCE    1 // Connected to EXP3 header
+/* Enable Serial 3 */
+#define HAVE_HWSERIAL1
+#define HAVE_HWSERIAL3
+
+// Default pin used for 'Serial' instance (ex: ST-Link)
+// Mandatory for Firmata
+#define PIN_SERIAL_RX           PA10
+#define PIN_SERIAL_TX           PA9
+
+/* HAL configuration */
+#define HSE_VALUE               12000000U
+
+#define FLASH_PAGE_SIZE			((uint32_t)(4*1024))
+
+#ifdef __cplusplus
+} // extern "C"
+#endif
+/*----------------------------------------------------------------------------
+ *        Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+// These serial port names are intended to allow libraries and architecture-neutral
+// sketches to automatically default to the correct port name for a particular type
+// of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
+// the first hardware serial port whose RX/TX pins are not dedicated to another use.
+//
+// SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor
+//
+// SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial
+//
+// SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library
+//
+// SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins.
+//
+// SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
+//                            pins are NOT connected to anything by default.
+#define SERIAL_PORT_MONITOR     Serial
+#define SERIAL_PORT_HARDWARE_OPEN  Serial
+#endif
+
+#endif /* _VARIANT_ARDUINO_STM32_ */