bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Expand on serial debugging (#13577)

Browse Source
This commit is contained in:
Scott Lahteine
2019-04-05 20:02:46 -05:00
committed by GitHub
parent bf7b28b456
commit cf12fc8366
20 changed files with 93 additions and 271 deletions
Download Patch File Download Diff File Expand all files Collapse all files

70
Marlin/src/gcode/bedlevel/G26.cpp
View File

@ -246,8 +246,6 @@ void move_to(const float &rx, const float &ry, const float &z, const float &e_de
// Yes: a 'normal' movement. No: a retract() or recover()
feed_value = has_xy_component ? G26_XY_FEEDRATE : planner.settings.max_feedrate_mm_s[E_AXIS] / 1.5;
if (g26_debug_flag) SERIAL_ECHOLNPAIR("in move_to() feed_value for XY:", feed_value);
destination[X_AXIS] = rx;
destination[Y_AXIS] = ry;
destination[E_AXIS] += e_delta;
@ -327,19 +325,15 @@ inline bool look_for_lines_to_connect() {
for (uint8_t j = 0; j < GRID_MAX_POINTS_Y; j++) {
#if HAS_LCD_MENU
if (user_canceled()) return true; // Check if the user wants to stop the Mesh Validation
if (user_canceled()) return true;
#endif
if (i < GRID_MAX_POINTS_X) { // We can't connect to anything to the right than GRID_MAX_POINTS_X.
// This is already a half circle because we are at the edge of the bed.
if (i < GRID_MAX_POINTS_X) { // Can't connect to anything to the right than GRID_MAX_POINTS_X.
// Already a half circle at the edge of the bed.
if (is_bitmap_set(circle_flags, i, j) && is_bitmap_set(circle_flags, i + 1, j)) { // check if we can do a line to the left
if (!is_bitmap_set(horizontal_mesh_line_flags, i, j)) {
//
// We found two circles that need a horizontal line to connect them
// Print it!
//
// Two circles need a horizontal line to connect them
sx = _GET_MESH_X( i ) + (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)); // right edge
ex = _GET_MESH_X(i + 1) - (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)); // left edge
@ -347,27 +341,19 @@ inline bool look_for_lines_to_connect() {
sy = ey = constrain(_GET_MESH_Y(j), Y_MIN_POS + 1, Y_MAX_POS - 1);
ex = constrain(ex, X_MIN_POS + 1, X_MAX_POS - 1);
if (position_is_reachable(sx, sy) && position_is_reachable(ex, ey)) {
if (g26_debug_flag) {
SERIAL_ECHOLNPAIR(" Connecting with horizontal line (sx=", sx, ", sy=", sy, ") -> (ex=", ex, ", ey=", ey, ")");
//debug_current_and_destination(PSTR("Connecting horizontal line."));
}
if (position_is_reachable(sx, sy) && position_is_reachable(ex, ey))
print_line_from_here_to_there(sx, sy, g26_layer_height, ex, ey, g26_layer_height);
}
bitmap_set(horizontal_mesh_line_flags, i, j); // Mark it as done so we don't do it again, even if we skipped it
bitmap_set(horizontal_mesh_line_flags, i, j); // Mark done, even if skipped
}
}
if (j < GRID_MAX_POINTS_Y) { // We can't connect to anything further back than GRID_MAX_POINTS_Y.
// This is already a half circle because we are at the edge of the bed.
if (j < GRID_MAX_POINTS_Y) { // Can't connect to anything further back than GRID_MAX_POINTS_Y.
// Already a half circle at the edge of the bed.
if (is_bitmap_set(circle_flags, i, j) && is_bitmap_set(circle_flags, i, j + 1)) { // check if we can do a line straight down
if (!is_bitmap_set( vertical_mesh_line_flags, i, j)) {
//
// We found two circles that need a vertical line to connect them
// Print it!
//
// Two circles that need a vertical line to connect them
sy = _GET_MESH_Y( j ) + (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)); // top edge
ey = _GET_MESH_Y(j + 1) - (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)); // bottom edge
@ -375,23 +361,10 @@ inline bool look_for_lines_to_connect() {
sy = constrain(sy, Y_MIN_POS + 1, Y_MAX_POS - 1);
ey = constrain(ey, Y_MIN_POS + 1, Y_MAX_POS - 1);
if (position_is_reachable(sx, sy) && position_is_reachable(ex, ey)) {
if (g26_debug_flag) {
SERIAL_ECHOPAIR(" Connecting with vertical line (sx=", sx);
SERIAL_ECHOPAIR(", sy=", sy);
SERIAL_ECHOPAIR(") -> (ex=", ex);
SERIAL_ECHOPAIR(", ey=", ey);
SERIAL_CHAR(')');
SERIAL_EOL();
#if ENABLED(AUTO_BED_LEVELING_UBL)
debug_current_and_destination(PSTR("Connecting vertical line."));
#endif
}
if (position_is_reachable(sx, sy) && position_is_reachable(ex, ey))
print_line_from_here_to_there(sx, sy, g26_layer_height, ex, ey, g26_layer_height);
}
bitmap_set(vertical_mesh_line_flags, i, j); // Mark it as done so we don't do it again, even if skipped
bitmap_set(vertical_mesh_line_flags, i, j); // Mark done, even if skipped
}
}
}
@ -725,8 +698,6 @@ void GcodeSuite::G26() {
ui.capture();
#endif
//debug_current_and_destination(PSTR("Starting G26 Mesh Validation Pattern."));
#if DISABLED(ARC_SUPPORT)
/**
@ -819,18 +790,6 @@ void GcodeSuite::G26() {
const float save_feedrate = feedrate_mm_s;
feedrate_mm_s = PLANNER_XY_FEEDRATE() / 10.0;
if (g26_debug_flag) {
SERIAL_ECHOPAIR(" plan_arc(ex=", endpoint[X_AXIS]);
SERIAL_ECHOPAIR(", ey=", endpoint[Y_AXIS]);
SERIAL_ECHOPAIR(", ez=", endpoint[Z_AXIS]);
SERIAL_ECHOPAIR(", len=", arc_length);
SERIAL_ECHOPAIR(") -> (ex=", current_position[X_AXIS]);
SERIAL_ECHOPAIR(", ey=", current_position[Y_AXIS]);
SERIAL_ECHOPAIR(", ez=", current_position[Z_AXIS]);
SERIAL_CHAR(')');
SERIAL_EOL();
}
plan_arc(endpoint, arc_offset, false); // Draw a counter-clockwise arc
feedrate_mm_s = save_feedrate;
set_destination_from_current();
@ -898,16 +857,13 @@ void GcodeSuite::G26() {
retract_filament(destination);
destination[Z_AXIS] = Z_CLEARANCE_BETWEEN_PROBES;
//debug_current_and_destination(PSTR("ready to do Z-Raise."));
move_to(destination, 0); // Raise the nozzle
//debug_current_and_destination(PSTR("done doing Z-Raise."));
destination[X_AXIS] = g26_x_pos; // Move back to the starting position
destination[Y_AXIS] = g26_y_pos;
//destination[Z_AXIS] = Z_CLEARANCE_BETWEEN_PROBES; // Keep the nozzle where it is
move_to(destination, 0); // Move back to the starting position
//debug_current_and_destination(PSTR("done doing X/Y move."));
#if DISABLED(NO_VOLUMETRICS)
parser.volumetric_enabled = volumetric_was_enabled;

40
Marlin/src/gcode/bedlevel/ubl/M49.cpp
View File

@ -1,40 +0,0 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* M49.cpp - Toggle the G26 debug flag
*/
#include "../../../inc/MarlinConfig.h"
#if ENABLED(G26_MESH_VALIDATION)
#include "../../gcode.h"
#include "../../../feature/bedlevel/bedlevel.h"
void GcodeSuite::M49() {
g26_debug_flag ^= true;
SERIAL_ECHOPGM("G26 Debug: ");
serialprintPGM(g26_debug_flag ? PSTR("On\n") : PSTR("Off\n"));
}
#endif // G26_MESH_VALIDATION