bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

🚸 Improve MPC tuning, add menu items (#23984, #24018, #24049, #24059)

Browse Source
This commit is contained in:
tombrazier
2022-04-10 07:20:05 +01:00
committed by Scott Lahteine
parent 6c557a2480
commit ce0af56d0a
11 changed files with 181 additions and 75 deletions
Download Patch File Download Diff File Expand all files Collapse all files

12
buildroot/tests/BIGTREE_GTR_V1_0
View File

@ -32,9 +32,15 @@ restore_configs
opt_set MOTHERBOARD BOARD_BTT_GTR_V1_0 SERIAL_PORT -1 \
EXTRUDERS 3 TEMP_SENSOR_1 1 TEMP_SENSOR_2 1 \
SERVO_DELAY '{ 300, 300, 300 }' \
SWITCHING_TOOLHEAD_X_POS '{ 215, 0 ,0 }'
opt_enable SWITCHING_TOOLHEAD TOOL_SENSOR
exec_test $1 $2 "BigTreeTech GTR | Switching Toolhead | Tool Sensors" "$3"
SWITCHING_TOOLHEAD_X_POS '{ 215, 0 ,0 }' \
MPC_HEATER_POWER '{ 40.0f, 40.0f, 40.0f }' \
MPC_BLOCK_HEAT_CAPACITY '{ 16.7f, 16.7f, 16.7f }' \
MPC_SENSOR_RESPONSIVENESS '{ 0.22f, 0.22f, 0.22f }' \
MPC_AMBIENT_XFER_COEFF '{ 0.068f, 0.068f, 0.068f }' \
MPC_AMBIENT_XFER_COEFF_FAN255 '{ 0.097f, 0.097f, 0.097f }'
opt_enable SWITCHING_TOOLHEAD TOOL_SENSOR MPCTEMP MPC_EDIT_MENU MPC_AUTOTUNE_MENU
opt_disable PIDTEMP
exec_test $1 $2 "BigTreeTech GTR | MPC | Switching Toolhead | Tool Sensors" "$3"
# clean up
restore_configs

1
buildroot/tests/STM32F103RC_btt
View File

@ -13,7 +13,6 @@ restore_configs
opt_set MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V1_0 SERIAL_PORT 1 SERIAL_PORT_2 -1 \
X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2209 Z_DRIVER_TYPE TMC2209 E0_DRIVER_TYPE TMC2209
opt_enable PINS_DEBUGGING Z_IDLE_HEIGHT
exec_test $1 $2 "BigTreeTech SKR Mini E3 1.0 - Basic Config with TMC2209 HW Serial" "$3"
# clean up

1
buildroot/tests/STM32F103RC_btt_maple
View File

@ -13,7 +13,6 @@ restore_configs
opt_set MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V1_0 SERIAL_PORT 1 SERIAL_PORT_2 -1 \
X_DRIVER_TYPE TMC2209 Y_DRIVER_TYPE TMC2209 Z_DRIVER_TYPE TMC2209 E0_DRIVER_TYPE TMC2209
opt_enable PINS_DEBUGGING Z_IDLE_HEIGHT
exec_test $1 $2 "BigTreeTech SKR Mini E3 1.0 - Basic Config with TMC2209 HW Serial" "$3"
# clean up

5
buildroot/tests/mega2560
View File

@ -181,7 +181,6 @@ opt_set MOTHERBOARD BOARD_RAMPS_14_EFB EXTRUDERS 0 LCD_LANGUAGE en TEMP_SENSOR_C
AXIS_RELATIVE_MODES '{ false, false, false }'
opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS EEPROM_BOOT_SILENT EEPROM_AUTO_INIT \
LASER_FEATURE AIR_EVACUATION AIR_EVACUATION_PIN AIR_ASSIST AIR_ASSIST_PIN LASER_COOLANT_FLOW_METER MEATPACK_ON_SERIAL_PORT_1
exec_test $1 $2 "MEGA2560 RAMPS | Laser Feature | Air Evacuation | Air Assist | Cooler | Flowmeter | 12864 LCD | meatpack | SERIAL_PORT_2 " "$3"
#
@ -196,7 +195,6 @@ opt_set MOTHERBOARD BOARD_RAMPS_14_EFB EXTRUDERS 0 LCD_LANGUAGE en TEMP_SENSOR_C
AXIS_RELATIVE_MODES '{ false, false, false }'
opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS EEPROM_BOOT_SILENT EEPROM_AUTO_INIT PRINTCOUNTER \
LASER_FEATURE AIR_EVACUATION AIR_EVACUATION_PIN AIR_ASSIST AIR_ASSIST_PIN LASER_COOLANT_FLOW_METER I2C_AMMETER
exec_test $1 $2 "MEGA2560 RAMPS | Laser Feature | Air Evacuation | Air Assist | Cooler | Flowmeter | 44780 LCD " "$3"
#
@ -207,7 +205,8 @@ opt_set MOTHERBOARD BOARD_RAMPS_14_EFB EXTRUDERS 1 \
TEMP_SENSOR_0 -2 TEMP_SENSOR_REDUNDANT -2 \
TEMP_SENSOR_REDUNDANT_SOURCE E1 TEMP_SENSOR_REDUNDANT_TARGET E0 \
TEMP_0_CS_PIN 11 TEMP_1_CS_PIN 12
opt_enable MPCTEMP
opt_disable PIDTEMP
exec_test $1 $2 "MEGA2560 RAMPS | Redundant temperature sensor | 2x MAX6675" "$3"
#