From c98d87935a3f754691a3468ee98d9478f7543683 Mon Sep 17 00:00:00 2001 From: Steffen Vogel Date: Thu, 8 Jan 2015 19:37:36 +0100 Subject: [PATCH] reformatting --- Documentation/Features.md | 45 +++++++++++++-------------------------- 1 file changed, 15 insertions(+), 30 deletions(-) diff --git a/Documentation/Features.md b/Documentation/Features.md index 304c638f9f..99fd7bbbbf 100644 --- a/Documentation/Features.md +++ b/Documentation/Features.md @@ -1,6 +1,4 @@ - -Features: -========= +# Features * Interrupt based movement with real linear acceleration * High steprate @@ -19,12 +17,12 @@ Features: * Arc support * Temperature oversampling * Dynamic Temperature setpointing aka "AutoTemp" -* Support for QTMarlin, a very beta GUI for PID-tuning and velocity-acceleration testing. https://github.com/bkubicek/QTMarlin +* Support for [QTMarlin](https://github.com/bkubicek/QTMarlin), a very beta GUI for PID-tuning and velocity-acceleration testing. * Endstop trigger reporting to the host software. * Updated sdcardlib * Heater power reporting. Useful for PID monitoring. * PID tuning -* CoreXY kinematics (www.corexy.com/theory.html) +* [CoreXY kinematics](www.corexy.com/theory.html) * Delta kinematics * SCARA kinematics * Dual X-carriage support for multiple extruder systems @@ -36,12 +34,9 @@ Features: The default baudrate is 250000. This baudrate has less jitter and hence errors than the usual 115200 baud, but is less supported by drivers and host-environments. +## Differences and additions to the already good Sprinter firmware -Differences and additions to the already good Sprinter firmware: -================================================================ - -Look-ahead: ------------ +### Look-ahead Marlin has look-ahead. While sprinter has to break and re-accelerate at each corner, lookahead will only decelerate and accelerate to a velocity, @@ -49,21 +44,18 @@ so that the change in vectorial velocity magnitude is less than the xy_jerk_velo This is only possible, if some future moves are already processed, hence the name. It leads to less over-deposition at corners, especially at flat angles. -Arc support: ------------- +### Arc support Slic3r can find curves that, although broken into segments, were ment to describe an arc. Marlin is able to print those arcs. The advantage is the firmware can choose the resolution, and can perform the arc with nearly constant velocity, resulting in a nice finish. Also, less serial communication is needed. -Temperature Oversampling: -------------------------- +### Temperature Oversampling To reduce noise and make the PID-differential term more useful, 16 ADC conversion results are averaged. -AutoTemp: ---------- +### AutoTemp If your gcode contains a wide spread of extruder velocities, or you realtime change the building speed, the temperature should be changed accordingly. Usually, higher speed requires higher temperature. @@ -76,42 +68,36 @@ The wanted temperature then will be set to t=tempmin+factor*maxerate, while bein If the target temperature is set manually or by gcode to a value less then tempmin, it will be kept without change. Ideally, your gcode can be completely free of temperature controls, apart from a M109 S T F in the start.gcode, and a M109 S0 in the end.gcode. -EEPROM: -------- +### EEPROM If you know your PID values, the acceleration and max-velocities of your unique machine, you can set them, and finally store them in the EEPROM. After each reboot, it will magically load them from EEPROM, independent what your Configuration.h says. -LCD Menu: ---------- +### LCD Menu If your hardware supports it, you can build yourself a LCD-CardReader+Click+encoder combination. It will enable you to realtime tune temperatures, accelerations, velocities, flow rates, select and print files from the SD card, preheat, disable the steppers, and do other fancy stuff. One working hardware is documented here: http://www.thingiverse.com/thing:12663 Also, with just a 20x4 or 16x2 display, useful data is shown. -SD card folders: ----------------- +### SD card directories If you have an SD card reader attached to your controller, also folders work now. Listing the files in pronterface will show "/path/subpath/file.g". You can write to file in a subfolder by specifying a similar text using small letters in the path. Also, backup copies of various operating systems are hidden, as well as files not ending with ".g". -SD card folders: ----------------- +### Autostart If you place a file auto[0-9].g into the root of the sd card, it will be automatically executed if you boot the printer. The same file will be executed by selecting "Autostart" from the menu. First *0 will be performed, than *1 and so on. That way, you can heat up or even print automatically without user interaction. -Endstop trigger reporting: --------------------------- +### Endstop trigger reporting If an endstop is hit while moving towards the endstop, the location at which the firmware thinks that the endstop was triggered is outputed on the serial port. This is useful, because the user gets a warning message. However, also tools like QTMarlin can use this for finding acceptable combinations of velocity+acceleration. -Coding paradigm: ----------------- +### Coding paradigm Not relevant from a user side, but Marlin was split into thematic junks, and has tried to partially enforced private variables. This is intended to make it clearer, what interacts which what, and leads to a higher level of modularization. @@ -121,8 +107,7 @@ In the serial communication, a #define based level of abstraction was enforced, some transfer is information (usually beginning with "echo:"), an error "error:", or just normal protocol, necessary for backwards compatibility. -Interrupt based temperature measurements: ------------------------------------------ +### Interrupt based temperature measurements An interrupt is used to manage ADC conversions, and enforce checking for critical temperatures. This leads to less blocking in the heater management routine.