bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

A single SERIAL_ECHO macro type (#12557)

Browse Source
This commit is contained in:
Scott Lahteine
2018-11-29 16:58:58 -06:00
committed by GitHub
parent 69d869c3d9
commit c986239837
86 changed files with 1016 additions and 1356 deletions
Download Patch File Download Diff File Expand all files Collapse all files

27
Marlin/src/gcode/queue.cpp
View File

@ -221,17 +221,17 @@ void ok_to_send() {
if (port < 0) return;
#endif
if (!send_ok[cmd_queue_index_r]) return;
SERIAL_PROTOCOLPGM_P(port, MSG_OK);
SERIAL_ECHOPGM_P(port, MSG_OK);
#if ENABLED(ADVANCED_OK)
char* p = command_queue[cmd_queue_index_r];
if (*p == 'N') {
SERIAL_PROTOCOL_P(port, ' ');
SERIAL_ECHO_P(port, ' ');
SERIAL_ECHO_P(port, *p++);
while (NUMERIC_SIGNED(*p))
SERIAL_ECHO_P(port, *p++);
}
SERIAL_PROTOCOLPGM_P(port, " P"); SERIAL_PROTOCOL_P(port, int(BLOCK_BUFFER_SIZE - planner.movesplanned() - 1));
SERIAL_PROTOCOLPGM_P(port, " B"); SERIAL_PROTOCOL_P(port, BUFSIZE - commands_in_queue);
SERIAL_ECHOPGM_P(port, " P"); SERIAL_ECHO_P(port, int(BLOCK_BUFFER_SIZE - planner.movesplanned() - 1));
SERIAL_ECHOPGM_P(port, " B"); SERIAL_ECHO_P(port, BUFSIZE - commands_in_queue);
#endif
SERIAL_EOL_P(port);
}
@ -246,15 +246,15 @@ void flush_and_request_resend() {
if (port < 0) return;
#endif
SERIAL_FLUSH_P(port);
SERIAL_PROTOCOLPGM_P(port, MSG_RESEND);
SERIAL_PROTOCOLLN_P(port, gcode_LastN + 1);
SERIAL_ECHOPGM_P(port, MSG_RESEND);
SERIAL_ECHOLN_P(port, gcode_LastN + 1);
ok_to_send();
}
void gcode_line_error(PGM_P err, uint8_t port) {
SERIAL_ERROR_START_P(port);
serialprintPGM_P(port, err);
SERIAL_ERRORLN_P(port, gcode_LastN);
SERIAL_ECHOLN_P(port, gcode_LastN);
flush_and_request_resend();
serial_count[port] = 0;
}
@ -648,7 +648,7 @@ inline void get_serial_commands() {
#if ENABLED(BEZIER_CURVE_SUPPORT)
case 5:
#endif
SERIAL_ERRORLNPGM(MSG_ERR_STOPPED);
SERIAL_ECHOLNPGM(MSG_ERR_STOPPED);
LCD_MESSAGEPGM(MSG_STOPPED);
break;
}
@ -754,7 +754,7 @@ inline void get_serial_commands() {
if (IS_SD_PRINTING())
sd_count = 0; // If a sub-file was printing, continue from call point
else {
SERIAL_PROTOCOLLNPGM(MSG_FILE_PRINTED);
SERIAL_ECHOLNPGM(MSG_FILE_PRINTED);
#if ENABLED(PRINTER_EVENT_LEDS)
printerEventLEDs.onPrintCompleted();
#if HAS_RESUME_CONTINUE
@ -769,10 +769,9 @@ inline void get_serial_commands() {
#endif // PRINTER_EVENT_LEDS
}
}
else if (n == -1) {
SERIAL_ERROR_START();
SERIAL_ECHOLNPGM(MSG_SD_ERR_READ);
}
else if (n == -1)
SERIAL_ERROR_MSG(MSG_SD_ERR_READ);
if (sd_char == '#') stop_buffering = true;
sd_comment_mode = false; // for new command
@ -843,7 +842,7 @@ void advance_command_queue() {
if (strstr_P(command, PSTR("M29"))) {
// M29 closes the file
card.closefile();
SERIAL_PROTOCOLLNPGM(MSG_FILE_SAVED);
SERIAL_ECHOLNPGM(MSG_FILE_SAVED);
#if !defined(__AVR__) || !defined(USBCON)
#if ENABLED(SERIAL_STATS_DROPPED_RX)