From c7f04fbcc7c3789568544398b5d1b723586734b5 Mon Sep 17 00:00:00 2001 From: Gege2B Date: Mon, 19 Jun 2017 23:13:58 +0200 Subject: [PATCH] French translation --- Marlin/language_fr.h | 126 ++++++++++++++++++++++++++++++++++--------- 1 file changed, 100 insertions(+), 26 deletions(-) diff --git a/Marlin/language_fr.h b/Marlin/language_fr.h index a919eb9b00..17b29b543b 100644 --- a/Marlin/language_fr.h +++ b/Marlin/language_fr.h @@ -42,7 +42,7 @@ #define MSG_AUTOSTART _UxGT("Demarrage auto") #define MSG_DISABLE_STEPPERS _UxGT("Arrêter moteurs") #define MSG_DEBUG_MENU _UxGT("Menu debug") -#define MSG_PROGRESS_BAR_TEST _UxGT("Test barre progression") +#define MSG_PROGRESS_BAR_TEST _UxGT("Test barre progress.") #define MSG_AUTO_HOME _UxGT("Origine auto.") #define MSG_AUTO_HOME_X _UxGT("Origine X Auto.") #define MSG_AUTO_HOME_Y _UxGT("Origine Y Auto.") @@ -51,6 +51,7 @@ #define MSG_LEVEL_BED_WAITING _UxGT("Clic pour commencer") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Point suivant") #define MSG_LEVEL_BED_DONE _UxGT("Mise à niveau OK!") +#define MSG_Z_FADE_HEIGHT _UxGT("Adoucir hauteur") #define MSG_SET_HOME_OFFSETS _UxGT("Regl. décal. origine") #define MSG_HOME_OFFSETS_APPLIED _UxGT("Décalages appliqués") #define MSG_SET_ORIGIN _UxGT("Régler origine") @@ -74,6 +75,68 @@ #define MSG_MOVE_AXIS _UxGT("Déplacer un axe") #define MSG_BED_LEVELING _UxGT("Règl. Niv. lit") #define MSG_LEVEL_BED _UxGT("Règl. Niv. lit") +#define MSG_EDITING_STOPPED _UxGT("Arrêt edit. maillage") +#define MSG_USER_MENU _UxGT("Commandes perso") + +#define MSG_UBL_DOING_G29 _UxGT("G29 en cours") +#define MSG_UBL_UNHOMED _UxGT("Origine XYZ d'abord") +#define MSG_UBL_TOOLS _UxGT("Outils UBL") +#define MSG_UBL_LEVEL_BED _UxGT("Niveau lit unifié") +#define MSG_UBL_MANUAL_MESH _UxGT("Maillage manuel") +#define MSG_UBL_BC_INSERT _UxGT("Poser câle & mesurer") +#define MSG_UBL_BC_INSERT2 _UxGT("Mesure") +#define MSG_UBL_BC_REMOVE _UxGT("ôter et mesurer lit") +#define MSG_UBL_MOVING_TO_NEXT _UxGT("Aller au suivant") +#define MSG_UBL_ACTIVATE_MESH _UxGT("Activer l'UBL") +#define MSG_UBL_DEACTIVATE_MESH _UxGT("Désactiver l'UBL") +#define MSG_UBL_SET_BED_TEMP _UxGT("Température lit") +#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP +#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Température buse") +#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP +#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Editer maille perso") +#define MSG_UBL_FINE_TUNE_MESH _UxGT("Réglage fin maille") +#define MSG_UBL_DONE_EDITING_MESH _UxGT("Termier maille") +#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Créer maille perso") +#define MSG_UBL_BUILD_MESH_MENU _UxGT("Créer maille") +#define MSG_UBL_BUILD_PLA_MESH _UxGT("Créer maille PLA") +#define MSG_UBL_BUILD_ABS_MESH _UxGT("Créer maille ABS") +#define MSG_UBL_BUILD_COLD_MESH _UxGT("Créer maille froide") +#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Ajuster haut. maille") +#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Hauteur") +#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Valider maille") +#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Valider maille PLA") +#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Valider maille ABS") +#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Valider maille perso") +#define MSG_UBL_CONTINUE_MESH _UxGT("Continuer maille") +#define MSG_UBL_MESH_LEVELING _UxGT("Niveau par maille") +#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("Niveau à 3 points") +#define MSG_UBL_GRID_MESH_LEVELING _UxGT("Niveau grille") +#define MSG_UBL_MESH_LEVEL _UxGT("Maille de niveau") +#define MSG_UBL_SIDE_POINTS _UxGT("Point latéral") +#define MSG_UBL_MAP_TYPE _UxGT("Type de carte") +#define MSG_UBL_OUTPUT_MAP _UxGT("Voir maille") +#define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Voir pour hôte") +#define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Voir pour CSV") +#define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Off Printer Backup") +#define MSG_UBL_INFO_UBL _UxGT("Voir info UBL") +#define MSG_UBL_EDIT_MESH_MENU _UxGT("Modifier maille") +#define MSG_UBL_FILLIN_AMOUNT _UxGT("Taux de remplissage") +#define MSG_UBL_MANUAL_FILLIN _UxGT("Remplissage manuel") +#define MSG_UBL_SMART_FILLIN _UxGT("Remplissage auto") +#define MSG_UBL_FILLIN_MESH _UxGT("Maille remplissage") +#define MSG_UBL_INVALIDATE_ALL _UxGT("Annuler tout") +#define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Annuler le plus près") +#define MSG_UBL_FINE_TUNE_ALL _UxGT("Réglage fin (tous)") +#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Réglage fin (proche)") +#define MSG_UBL_STORAGE_MESH_MENU _UxGT("Stockage maille") +#define MSG_UBL_STORAGE_SLOT _UxGT("Slot mémoire") +#define MSG_UBL_LOAD_MESH _UxGT("Charger maille") +#define MSG_UBL_SAVE_MESH _UxGT("Sauver maille") +#define MSG_UBL_SAVE_ERROR _UxGT("Err: Enreg. UBL") +#define MSG_UBL_RESTORE_ERROR _UxGT("Err: Ouvrir UBL") +#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Offset Z arrêté") + + #define MSG_MOVING _UxGT("Déplacement...") #define MSG_FREE_XY _UxGT("Débloquer XY") #define MSG_MOVE_X _UxGT("Dépl. X") @@ -107,9 +170,11 @@ #define MSG_VY_JERK _UxGT("Vy-jerk") #define MSG_VZ_JERK _UxGT("Vz-jerk") #define MSG_VE_JERK _UxGT("Ve-jerk") +#define MSG_VELOCITY _UxGT("Vélocité") #define MSG_VMAX _UxGT("Vmax") #define MSG_VMIN _UxGT("Vmin") #define MSG_VTRAV_MIN _UxGT("Vdepl min") +#define MSG_ACCELERATION _UxGT("Accélération") #define MSG_AMAX _UxGT("Amax ") #define MSG_A_RETRACT _UxGT("A-retract") #define MSG_A_TRAVEL _UxGT("A-Dépl.") @@ -133,6 +198,7 @@ #define MSG_STORE_EEPROM _UxGT("Sauver config") #define MSG_LOAD_EEPROM _UxGT("Lire config") #define MSG_RESTORE_FAILSAFE _UxGT("Restaurer défauts") +#define MSG_INIT_EEPROM _UxGT("Initialiser EEPROM") #define MSG_REFRESH _UxGT("Actualiser") #define MSG_WATCH _UxGT("Surveiller") #define MSG_PREPARE _UxGT("Préparer") @@ -144,6 +210,7 @@ #define MSG_NO_CARD _UxGT("Pas de carte") #define MSG_DWELL _UxGT("Repos...") #define MSG_USERWAIT _UxGT("Atten. de l'util.") +#define MSG_PRINT_PAUSED _UxGT("Impr. en pause") #define MSG_RESUMING _UxGT("Repri. de l'impr.") #define MSG_PRINT_ABORTED _UxGT("Impr. Annulée") #define MSG_NO_MOVE _UxGT("Moteurs bloqués.") @@ -161,6 +228,7 @@ #define MSG_INIT_SDCARD _UxGT("Init. la carte SD") #define MSG_CNG_SDCARD _UxGT("Changer de carte") #define MSG_ZPROBE_OUT _UxGT("Z sonde extè. lit") +#define MSG_BLTOUCH _UxGT("BLTouch") #define MSG_BLTOUCH_SELFTEST _UxGT("Autotest BLTouch") #define MSG_BLTOUCH_RESET _UxGT("RaZ BLTouch") #define MSG_BLTOUCH_DEPLOY _UxGT("Déployer BLTouch") @@ -201,13 +269,19 @@ #define MSG_INFO_MENU _UxGT("Infos imprimante") #define MSG_INFO_PRINTER_MENU _UxGT("Infos imprimante") +#define MSG_3POINT_LEVELING _UxGT("Niveau à 3 points") +#define MSG_LINEAR_LEVELING _UxGT("Niveau linéaire") +#define MSG_BILINEAR_LEVELING _UxGT("Niveau bilinéaire") +#define MSG_UBL_LEVELING _UxGT("Niveau lit unifié") +#define MSG_MESH_LEVELING _UxGT("Niveau maillage") #define MSG_INFO_STATS_MENU _UxGT("Stats. imprimante") #define MSG_INFO_BOARD_MENU _UxGT("Infos carte") #define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistors") #define MSG_INFO_EXTRUDERS _UxGT("Extrudeurs") #define MSG_INFO_BAUDRATE _UxGT("Baud") #define MSG_INFO_PROTOCOL _UxGT("Protocole") -#define MSG_CASE_LIGHT _UxGT("Lumière") +#define MSG_CASE_LIGHT _UxGT("Lumière caisson") +#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Luminosité") #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("Nbre impressions") @@ -239,32 +313,32 @@ #if LCD_HEIGHT >= 4 // Up to 3 lines allowed - #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Attente Démarrage") - #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("du filament") - #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("changer") - #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("attente de") - #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("décharger filament") - #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("insérer filament") - #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("et app. bouton") - #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("pour continuer...") - #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Appuyer sur le bouton...") - #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("Pour chauffer la buse.") - #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Buse en chauffe") - #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Patientez SVP...") - #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("attente de") - #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("chargement filament") - #define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("attente de") - #define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("extrusion filament") - #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("attente impression") - #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("pour reprendre") + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Attente Démarrage") + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("du filament") + #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("changer") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("attente de") + #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("décharger filament") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("insérer filament") + #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("et app. bouton") + #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("pour continuer...") + #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Presser le bouton...") + #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("Pr chauffer la buse") + #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Buse en chauffe") + #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Patientez SVP...") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("attente de") + #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("chargement filament") + #define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("attente de") + #define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("extrusion filament") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("attente impression") + #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("pour reprendre") #else // LCD_HEIGHT < 4 // Up to 2 lines allowed - #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Patientez...") - #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Ejection...") - #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insérer et clic") - #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Chargement...") - #define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extrusion...") - #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Reprise...") + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Patientez...") + #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Ejection...") + #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insérer et clic") + #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Chargement...") + #define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extrusion...") + #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Reprise...") #endif // LCD_HEIGHT < 4 #endif // LANGUAGE_FR_H